Move kbdpad_mk2 to kbdpad/mk2 and remove clutter

keyboards/kbdfans/kbdpad/mk2/config.h

@@ -0,0 +1,70 @@
+/*
+Copyright 2019 Ryota Goto
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xA103
+#define PRODUCT_ID      0x0006
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KBDfans
+#define PRODUCT         KBDPAD-MKII
+#define DESCRIPTION     Numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/* Keyboard Matrix Assignments */
+#define MATRIX_ROW_PINS { D3, D1, D2, C6, C7, B6 }
+#define MATRIX_COL_PINS { C4, C5, B3, B2 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0
+
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+#endif
+#define RGB_DI_PIN B5
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 16
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/kbdfans/kbdpad_mk2/keymaps/default/keymap.c → keyboards/kbdfans/kbdpad/mk2/keymaps/default/keymap.c

@@ -19,26 +19,10 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [0] = LAYOUT_ortho_6x4( /* Base */
     KC_ESC,  KC_LCTL, KC_LALT, KC_BSPC, \
-	KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
-	KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
-	KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
-	KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
-	KC_P0,   KC_P0,   KC_PDOT, KC_PENT  \
+    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,   KC_P8,   KC_P9,   KC_PPLS, \
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,   KC_P2,   KC_P3,   KC_PENT, \
+    KC_P0,   KC_P0,   KC_PDOT, KC_PENT  \
   ),
 };
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}

keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.c → keyboards/kbdfans/kbdpad/mk2/mk2.c

@@ -13,10 +13,10 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#include "kbdpad_mk2.h"
+#include "mk2.h"
 
 void matrix_init_kb(void) {
-	
+
   // Num Lock LED = B4
   // Sinking setup (5V -> LED/Res -> Pin)
 
@@ -26,7 +26,7 @@ void matrix_init_kb(void) {
 }
 
 void led_set_kb(uint8_t usb_led) {
-  
+
   // Sinking setup. Write HIGH to turn OFF, LOW to turn ON.
 
   if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {

keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.h → keyboards/kbdfans/kbdpad/mk2/mk2.h

@@ -27,17 +27,17 @@
  */
 #define LAYOUT_ortho_6x4( \
     K00, K01, K02, K03, \
-	K10, K11, K12, K13, \
-	K20, K21, K22, K23, \
-	K30, K31, K32, K33, \
-	K40, K41, K42, K43, \
-	K50, K51, K52, K53  \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43, \
+    K50, K51, K52, K53  \
 ) \
 { \
     { K00, K01, K02, K03 }, \
-	{ K10, K11, K12, K13 }, \
-	{ K20, K21, K22, K23 }, \
-	{ K30, K31, K32, K33 }, \
-	{ K40, K41, K42, K43 }, \
-	{ K50, K51, K52, K53 }  \
+    { K10, K11, K12, K13 }, \
+    { K20, K21, K22, K23 }, \
+    { K30, K31, K32, K33 }, \
+    { K40, K41, K42, K43 }, \
+    { K50, K51, K52, K53 }  \
 }