Warning message for unknown valve position has a typo #17
Comments
ghalym
added a commit
to ghalym/lcls-twincat-vacuum
that referenced
this issue
May 28, 2020
Merged
ghalym
added a commit
that referenced
this issue
Jun 16, 2020
* DEV: Issue#20, Issue#22 Issue#20 : Ion Pumps use own pressure reading after turning on, also added a method for AutoOn. user program to invoke the method. Issue#22, Update MKS 909 Hot Cathode POU with logging and all other upgrades. * DEV: PIP AutoOn is availabe through pragma * DEV: Gauge event severity and message changes * DEV: PIP logger and VGC pmps * DEV: Added Gagues 972,909 ENH: PTM MagDriveDigital has status updates DEV: Serial_IO Methodes added to pumps with serial interface * DEV: Unit Tests, Agilent Analog Signals. FIX: EBARA PTM Analaog Signals * ENH: Comments * FIX: PIP Pressure is not calculated when device is off * Issues #11, #14,#21,#25,#27,#32 * Issue #17 * ENH: MKS 500 logger, Ebara dry pymp and ebara turbo * FIX: Pragma * ENH: Change the valve moving timout to 30s * DEV: VGC new position State, Diode interlock ok function, Ebara max backing pressure * ENH: xLog bool to switch off logger for noisy gauges FIX: PTM_Ebara Current speed calculations * DEV: Don't use hard-coded values * BUG: move MKS317's ValidLo low limit to .15V * STY: order range limits * FIX: MKS317's ValidLo limit issue #36 Co-authored-by: ghalym <ghalym@users.noreply.github.com> Co-authored-by: n-wbrown <n-wbrown@users.noreply.github.com>
ghalym
added a commit
that referenced
this issue
Jun 17, 2020
* DEV: Issue#20, Issue#22 Issue#20 : Ion Pumps use own pressure reading after turning on, also added a method for AutoOn. user program to invoke the method. Issue#22, Update MKS 909 Hot Cathode POU with logging and all other upgrades. * DEV: PIP AutoOn is availabe through pragma * DEV: Gauge event severity and message changes * DEV: PIP logger and VGC pmps * DEV: Added Gagues 972,909 ENH: PTM MagDriveDigital has status updates DEV: Serial_IO Methodes added to pumps with serial interface * DEV: Unit Tests, Agilent Analog Signals. FIX: EBARA PTM Analaog Signals * ENH: Comments * FIX: PIP Pressure is not calculated when device is off * Issues #11, #14,#21,#25,#27,#32 * Issue #17 * ENH: MKS 500 logger, Ebara dry pymp and ebara turbo * FIX: Pragma * ENH: Change the valve moving timout to 30s * DEV: VGC new position State, Diode interlock ok function, Ebara max backing pressure * ENH: xLog bool to switch off logger for noisy gauges FIX: PTM_Ebara Current speed calculations * DEV: Don't use hard-coded values * BUG: move MKS317's ValidLo low limit to .15V * STY: order range limits * FIX: MKS317's ValidLo limit issue #36 * ENH: PIP xError Co-authored-by: ghalym <ghalym@users.noreply.github.com> Co-authored-by: n-wbrown <n-wbrown@users.noreply.github.com>
ghalym
added a commit
that referenced
this issue
Jun 18, 2020
* DEV: Issue#20, Issue#22 Issue#20 : Ion Pumps use own pressure reading after turning on, also added a method for AutoOn. user program to invoke the method. Issue#22, Update MKS 909 Hot Cathode POU with logging and all other upgrades. * DEV: PIP AutoOn is availabe through pragma * DEV: Gauge event severity and message changes * DEV: PIP logger and VGC pmps * DEV: Added Gagues 972,909 ENH: PTM MagDriveDigital has status updates DEV: Serial_IO Methodes added to pumps with serial interface * DEV: Unit Tests, Agilent Analog Signals. FIX: EBARA PTM Analaog Signals * ENH: Comments * FIX: PIP Pressure is not calculated when device is off * Issues #11, #14,#21,#25,#27,#32 * Issue #17 * ENH: MKS 500 logger, Ebara dry pymp and ebara turbo * FIX: Pragma * ENH: Change the valve moving timout to 30s * DEV: VGC new position State, Diode interlock ok function, Ebara max backing pressure * ENH: xLog bool to switch off logger for noisy gauges FIX: PTM_Ebara Current speed calculations * DEV: Don't use hard-coded values * BUG: move MKS317's ValidLo low limit to .15V * STY: order range limits * FIX: MKS317's ValidLo limit issue #36 * ENH: PIP xError * FIX: FB_VGC valve state Co-authored-by: ghalym <ghalym@users.noreply.github.com> Co-authored-by: n-wbrown <n-wbrown@users.noreply.github.com>
ghalym
added a commit
that referenced
this issue
Jun 24, 2020
* DEV: Issue#20, Issue#22 Issue#20 : Ion Pumps use own pressure reading after turning on, also added a method for AutoOn. user program to invoke the method. Issue#22, Update MKS 909 Hot Cathode POU with logging and all other upgrades. * DEV: PIP AutoOn is availabe through pragma * DEV: Gauge event severity and message changes * DEV: PIP logger and VGC pmps * DEV: Added Gagues 972,909 ENH: PTM MagDriveDigital has status updates DEV: Serial_IO Methodes added to pumps with serial interface * DEV: Unit Tests, Agilent Analog Signals. FIX: EBARA PTM Analaog Signals * ENH: Comments * FIX: PIP Pressure is not calculated when device is off * Issues #11, #14,#21,#25,#27,#32 * Issue #17 * ENH: MKS 500 logger, Ebara dry pymp and ebara turbo * FIX: Pragma * ENH: Change the valve moving timout to 30s * DEV: VGC new position State, Diode interlock ok function, Ebara max backing pressure * ENH: xLog bool to switch off logger for noisy gauges FIX: PTM_Ebara Current speed calculations * DEV: Don't use hard-coded values * BUG: move MKS317's ValidLo low limit to .15V * STY: order range limits * FIX: MKS317's ValidLo limit issue #36 * ENH: PIP xError * FIX: FB_VGC valve state * ENH: VGC FFO AutoReset * DEV: Modify limit based on experience with EM1K0-GMD-GPI-40 and signal noise * ENH: VGC Logger moved to ACT_logger. ADS Watchdog read and write times has been configured (5-10 times) the signal transmission * watchdog * FIX: MKS500 iTermBits FIX: MKS275 deadband FIX: MKS317 DisconnectedBoundary Co-authored-by: ghalym <ghalym@users.noreply.github.com> Co-authored-by: n-wbrown <n-wbrown@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Warning (: Invalid Valve Position)
The text was updated successfully, but these errors were encountered: