[pull] master from torvalds:master #49
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
There is no unregister netlink notifier and family on error paths in init_mac80211_hwsim(). Also there is an error path where hwsim_class is not destroyed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 6275936 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the missing unlock before return from function ieee80211_mark_sta_auth() in the error handling case. Cc: stable@vger.kernel.org Fixes: fc107a9 ("mac80211: Helper function for marking STA authenticated") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> [use result variable/label instead of duplicating] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Otherwise if network manager starts configuring Wi-Fi interface immidiatelly after getting notification of its creation, we will get NULL pointer dereference: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff95ae94c8>] hrtimer_active+0x28/0x50 ... Call Trace: [<ffffffff95ae9997>] ? hrtimer_try_to_cancel+0x27/0x110 [<ffffffff95ae9a95>] ? hrtimer_cancel+0x15/0x20 [<ffffffffc0803bf0>] ? mac80211_hwsim_config+0x140/0x1c0 [mac80211_hwsim] Cc: stable@vger.kernel.org Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@globallogic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do a logical vht_capa &= vht_capa_mask of user-supplied VHT mask with the driver-supplied mask of modifiable VHT capabilities. Fix whitespaces and comment typos. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_sta_opmode_change_notify needs a gfp_t flag to hint the nl80211 stack when allocating new skb, but it is called under tasklet context here with GFP_KERNEL and kernel will yield a warning about it. Cc: stable@vger.kernel.org Fixes: ff84e7b ("mac80211: Add support to notify ht/vht opmode modification.") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This fixes stale beacon-int values that would keep a netdev from going up. To reproduce: Create two VAP on one radio. vap1 has beacon-int 100, start it. vap2 has beacon-int 240, start it (and it will fail because beacon-int mismatch). reconfigure vap2 to have beacon-int 100 and start it. It will fail because the stale beacon-int 240 will be used in the ifup path and hostapd never gets a chance to set the new beacon interval. Cc: stable@vger.kernel.org Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When FTM is enabled, doing a CSA will unexpectedly lose it since the value of ftm_responder may be initialized to 0 instead of -1, so fix that. Fixes: 81e54d0 ("cfg80211: support FTM responder configuration/statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the FTM responder settings are changed simultaneously with the CSA beacon, the buffer size allocated isn't sufficient and we'll have a heap overrun. Fix this. While at it, also clean up the ftm_responder assignment, doing it only if ftm_responder is non-zero is valid as it's 0 to start with, but not really useful to understand the code. Fixes: bc84797 ("mac80211: support FTM responder configuration/statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
…ent interfaces Currently when an AP and STA interfaces are active in the same or different radios, regulatory settings are restored whenever the STA disconnects. This restores all channel information including dfs states in all radios. For example, if an AP interface is active in one radio and STA in another, when radar is detected on the AP interface, the dfs state of the channel will be changed to UNAVAILABLE. But when the STA interface disconnects, this issues a regulatory disconnect hint which restores all regulatory settings in all the radios attached and thereby losing the stored dfs state on the other radio where the channel was marked as unavailable earlier. Hence prevent such regulatory restore whenever another active beaconing interface is present in the same or other radios. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Function btf_name_valid_identifier() have been implemented in bpf-next commit 2667a26 ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO"). Backport this function so later patch can use it. Fixes: 69b693f ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch added name checking for the following types:
. BTF_KIND_PTR, BTF_KIND_ARRAY, BTF_KIND_VOLATILE,
BTF_KIND_CONST, BTF_KIND_RESTRICT:
the name must be null
. BTF_KIND_STRUCT, BTF_KIND_UNION: the struct/member name
is either null or a valid identifier
. BTF_KIND_ENUM: the enum type name is either null or a valid
identifier; the enumerator name must be a valid identifier.
. BTF_KIND_FWD: the name must be a valid identifier
. BTF_KIND_TYPEDEF: the name must be a valid identifier
For those places a valid name is required, the name must be
a valid C identifier. This can be relaxed later if we found
use cases for a different (non-C) frontend.
Fixes: 69b693f ("bpf: btf: Introduce BPF Type Format (BTF)")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two unit test cases, which should encode TYPEDEF type, but instead encode PTR type. The error is flagged out after enforcing name checking in the previous patch. Fixes: c0fa1b6 ("bpf: btf: Add BTF tests") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following additional unit testcases are added to test_btf: ... BTF raw test[42] (typedef (invalid name, name_off = 0)): OK BTF raw test[43] (typedef (invalid name, invalid identifier)): OK BTF raw test[44] (ptr type (invalid name, name_off <> 0)): OK BTF raw test[45] (volatile type (invalid name, name_off <> 0)): OK BTF raw test[46] (const type (invalid name, name_off <> 0)): OK BTF raw test[47] (restrict type (invalid name, name_off <> 0)): OK BTF raw test[48] (fwd type (invalid name, name_off = 0)): OK BTF raw test[49] (fwd type (invalid name, invalid identifier)): OK BTF raw test[50] (array type (invalid name, name_off <> 0)): OK BTF raw test[51] (struct type (name_off = 0)): OK BTF raw test[52] (struct type (invalid name, invalid identifier)): OK BTF raw test[53] (struct member (name_off = 0)): OK BTF raw test[54] (struct member (invalid name, invalid identifier)): OK BTF raw test[55] (enum type (name_off = 0)): OK BTF raw test[56] (enum type (invalid name, invalid identifier)): OK BTF raw test[57] (enum member (invalid name, name_off = 0)): OK BTF raw test[58] (enum member (invalid name, invalid identifier)): OK ... Fixes: c0fa1b6 ("bpf: btf: Add BTF tests") Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song says: ==================== This patch set added name checking for PTR, ARRAY, VOLATILE, TYPEDEF, CONST, RESTRICT, STRUCT, UNION, ENUM and FWD types. Such a strict name checking makes BTF more sound in the kernel and future BTF-to-header-file converesion ([1]) less fragile. Patch #1 implemented btf_name_valid_identifier() for name checking which will be used in Patch #2. Patch #2 checked name validity for the above mentioned types. Patch #3 fixed two existing test_btf unit tests exposed by the strict name checking. Patch #4 added additional test cases. This patch set is against bpf tree. Patch #1 has been implemented in bpf-next commit Commit 2667a26 ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO"), so there is no need to apply this patch to bpf-next. In case this patch is applied to bpf-next, there will be a minor conflict like diff --cc kernel/bpf/btf.c index a09b2f94ab25,93c233ab2db6..000000000000 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@@ -474,7 -451,7 +474,11 @@@ static bool btf_name_valid_identifier(c return !*src; } ++<<<<<<< HEAD +const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++======= + static const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++>>>>>>> fa9566b0847d... bpf: btf: implement btf_name_valid_identifier() { if (!offset) return "(anon)"; Just resolve the conflict by taking the "const char ..." line. Patches #2, #3 and #4 can be applied to bpf-next without conflict. [1]: http://vger.kernel.org/lpc-bpf2018.html#session-2 ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit b12d6ec ("bpf: btf: add btf print functionality") added btf pretty print functionality to bpftool. There is a problem though in printing a bitfield whose type has modifiers. For example, for a type like typedef int ___int; struct tmp_t { int a:3; ___int b:3; }; Suppose we have a map struct bpf_map_def SEC("maps") tmpmap = { .type = BPF_MAP_TYPE_HASH, .key_size = sizeof(__u32), .value_size = sizeof(struct tmp_t), .max_entries = 1, }; and the hash table is populated with one element with key 0 and value (.a = 1 and .b = 2). In BTF, the struct member "b" will have a type "typedef" which points to an int type. The current implementation does not pass the bit offset during transition from typedef to int type, hence incorrectly print the value as $ bpftool m d id 79 [{ "key": 0, "value": { "a": 0x1, "b": 0x1 } } ] This patch fixed the issue by carrying bit_offset along the type chain during bit_field print. The correct result can be printed as $ bpftool m d id 76 [{ "key": 0, "value": { "a": 0x1, "b": 0x2 } } ] The kernel pretty print is implemented correctly and does not have this issue. Fixes: b12d6ec ("bpf: btf: add btf print functionality") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To improve performance, this increases Rx descriptor to 256, Tx descriptor to 64, and adjusts NAPI weight to NAPI_POLL_WEIGHT. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 26a4676 ("arm64: mm: define NET_IP_ALIGN to 0"), AVE controller affects this modification because the controller forces to ignore lower 2bits of buffer start address, and make 2-byte headroom, that is, data reception starts from (buffer + 2). This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value, and replaces NET_IP_ALIGN with it. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing MODULE_AUTHOR of ave driver and an entry to MAINTAINERS. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kunihiko Hayashi says: ==================== fixup AVE ethernet driver This series adds fixup for AVE ethernet driver that includes increse of descriptors, replacing macro for linux-next, and adding missing author information. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
The link modes that sfp_parse_support() detects are stored in the 'modes' bitmap. There is no reason to make an exception for 1000Base-PX or 1000Base-BX10. Fixes: 0314586 ("sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Before commit 80d1966 ("net: Refactor XPS for CPUs and Rx queues"), netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the queues being reset. Now, this is only done when the "active" variable in clean_xps_maps() is false, ie when on all the CPUs, there's no active XPS mapping left. Fixes: 80d1966 ("net: Refactor XPS for CPUs and Rx queues") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0415746 ("net: Use static_key for XPS maps") introduced a static key for XPS, but the increments/decrements don't match. First, the static key's counter is incremented once for each queue, but only decremented once for a whole batch of queues, leading to large unbalances. Second, the xps_rxqs_needed key is decremented whenever we reset a batch of queues, whether they had any rxqs mapping or not, so that if we setup cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would decrement the xps_rxqs_needed key. This reworks the accounting scheme so that the xps_needed key is incremented only once for each type of XPS for all the queues on a device, and the xps_rxqs_needed key is incremented only once for all queues. This is sufficient to let us retrieve queues via get_xps_queue(). This patch introduces a new reset_xps_maps(), which reinitializes and frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a reference to the needed keys: - both xps_needed and xps_rxqs_needed, in case of rxqs maps, - only xps_needed, in case of CPU maps. Now, we also need to call reset_xps_maps() at the end of __netif_set_xps_queue() when there's no active map left, for example when writing '00000000,00000000' to all queues' xps_rxqs setting. Fixes: 0415746 ("net: Use static_key for XPS maps") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca says: ==================== fixes for XPS configuration after Symmetric queue selection This fixes some bugs introduced by the "Symmetric queue selection using XPS for Rx queues". First, the refactoring of the cleanup function skipped resetting the queue's NUMA node under some conditions. Second, the accounting on static keys for XPS and RXQS-XPS is unbalanced, so the static key for XPS won't actually disable itself, once enabled. The RXQS-XPS static key can actually be disabled by reconfiguring a device that didn't have RXQS-XPS configured at all. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
SFP standards are now available from the SNIA (Storage Networking Industry Association) website. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
…lock The length of the called and calling address was not calculated correctly (BCD encoding). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
o x25_find_listener(): the compare for the null_x25_address was wrong. We have to check the x25_addr of the listener socket instead of the x25_addr of the incomming call. o x25_bind(): it was not possible to bind a socket to null_x25_address Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
If a session in X25_STATE_1 (Awaiting Call Accept) receives a call request, the session will be closed (x25_disconnect), cause=0x01 (Number Busy) and diag=0x48 (Call Collision) will be set and a clear request will be send. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
__qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following commit: d649340 ("x86/efi: Use efi_exit_boot_services()") introduced a regression on systems with large memory maps causing them to hang on boot. The first "goto get_map" that was removed from exit_boot() ensured there was enough room for the memory map when efi_call_early(exit_boot_services) was called. This happens when (nr_desc > ARRAY_SIZE(params->e820_table). Chain of events: exit_boot() efi_exit_boot_services() efi_get_memory_map <- at this point the mm can't grow over 8 desc priv_func() exit_boot_func() allocate_e820ext() <- new mm grows over 8 desc from e820 alloc efi_call_early(exit_boot_services) <- mm key doesn't match so retry efi_call_early(get_memory_map) <- not enough room for new mm system hangs This patch allocates the e820 buffer before calling efi_exit_boot_services() and fixes the regression. [ mingo: minor cleanliness edits. ] Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: YiFei Zhu <zhuyifei1999@gmail.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by: YiFei Zhu <zhuyifei1999@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
These interrupt functions are already non-attachable by kprobes. Blacklist them explicitly so that they can show up in /sys/kernel/debug/kprobes/blacklist and tools like BCC can use this additional information. Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20181206095648.GA8249@Dell Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is possible to trigger a warning in mlxsw in case a flood entry which mlxsw is not aware of is deleted from the VxLAN device. This is because mlxsw expects to find a singly linked list where the flood entry is present in. Fix by removing these warnings for now. Will re-add them in the next release after we teach mlxsw to ask for a dump of FDB entries from the VxLAN device, once it is enslaved to a bridge mlxsw cares about. Fixes: 6e6030b ("mlxsw: spectrum_nve: Implement common NVE core") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It should never be possible for a user to set a VNI on a FID in case one is already set. The driver therefore returns an error, but fails to drop the reference count taken earlier when calling mlxsw_sp_fid_8021d_lookup(). Drop the reference when this unlikely error is hit. Fixes: 1c30d18 ("mlxsw: spectrum: Enable VxLAN enslavement to bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
GRE decap offload is configured when local routes prefix correspond to the local address of one of the offloaded GRE tunnels. The matching check was found to be too strict, such that for a flat GRE configuration, in which the overlay and underlay traffic share the same non-default VRF, decap flow was not offloaded. Relax the check for decap flow offloading. A match occurs if the local address of the tunnel matches the local route address while both share the same VRF table. Fixes: 4607f6d ("mlxsw: spectrum_router: Support IPv4 underlay decap") Signed-off-by: Nir Dotan <nird@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When deleting a VLAN device using an ioctl the netdev is unregistered before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can lead to a use-after-free in mlxsw in case the VLAN device is deleted while being enslaved to a bridge. The reason for the above is that when mlxsw receives the CHANGEUPPER event, it wrongly assumes that the VLAN device is no longer its upper and thus destroys the internal representation of the bridge port despite the reference count being non-zero. Fix this by checking if the VLAN device is our upper using its real device. In net-next I'm going to remove this trick and instead make mlxsw completely agnostic to the order of the events. Fixes: c57529e ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says: ==================== mlxsw: Various fixes Patches #1 and #2 fix two VxLAN related issues. The first patch removes warnings that can currently be triggered from user space. Second patch avoids leaking a FID in an error path. Patch #3 fixes a too strict check that causes certain host routes not to be promoted to perform GRE decapsulation in hardware. Last patch avoids a use-after-free when deleting a VLAN device via an ioctl when it is enslaved to a bridge. I have a patchset for net-next that reworks this code and makes the driver more robust. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by: Dmitry Golovin <dima@golovin.in> Reported-by: Bill Wendling <morbo@google.com> Suggested-by: Dmitry Golovin <dima@golovin.in> Suggested-by: Rui Ueyama <ruiu@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: ClangBuiltLinux#31
In 'seg6_output', stack variable 'struct flowi6 fl6' was missing initialization. Fixes: 6c8702c ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_tso_should_defer() can return true in three different cases : 1) We are cwnd-limited 2) We are rwnd-limited 3) We are application limited. Neal pointed out that my recent fix went too far, since it assumed that if we were not in 1) case, we must be rwnd-limited Fix this by properly populating the is_cwnd_limited and is_rwnd_limited booleans. After this change, we can finally move the silly check for FIN flag only for the application-limited case. The same move for EOR bit will be handled in net-next, since commit 1c09f7d ("tcp: do not try to defer skbs with eor mark (MSG_EOR)") is scheduled for linux-4.21 Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100 and checking none of them was rwnd_limited in the chrono_stat output from "ss -ti" command. Fixes: 4172754 ("tcp: Do not underestimate rwnd_limited") Signed-off-by: Eric Dumazet <edumazet@google.com> Suggested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Even if we send an IPv6 packet without options, MAX_HEADER might not be enough to account for the additional headroom required by alignment of hardware headers. On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL, sending short SCTP packets over IPv4 over L2TP over IPv6, we start with 100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54 bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2(). Those would be enough to append our 14 bytes header, but we're going to align that to 16 bytes, and write 2 bytes out of the allocated slab in neigh_hh_output(). KASan says: [ 264.967848] ================================================================== [ 264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70 [ 264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201 [ 264.967870] [ 264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1 [ 264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) [ 264.967887] Call Trace: [ 264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0) [ 264.967903] [<00000000017e379c>] dump_stack+0x23c/0x290 [ 264.967912] [<00000000007bc594>] print_address_description+0xf4/0x290 [ 264.967919] [<00000000007bc8fc>] kasan_report+0x13c/0x240 [ 264.967927] [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70 [ 264.967935] [<000000000163f890>] ip6_finish_output+0x430/0x7f0 [ 264.967943] [<000000000163fe44>] ip6_output+0x1f4/0x580 [ 264.967953] [<000000000163882a>] ip6_xmit+0xfea/0x1ce8 [ 264.967963] [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8 [ 264.968033] [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core] [ 264.968037] [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth] [ 264.968041] [<0000000001220020>] dev_hard_start_xmit+0x268/0x928 [ 264.968069] [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350 [ 264.968071] [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478 [ 264.968075] [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0 [ 264.968078] [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8 [ 264.968081] [<00000000013ddd1e>] ip_output+0x226/0x4c0 [ 264.968083] [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938 [ 264.968100] [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp] [ 264.968116] [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp] [ 264.968131] [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp] [ 264.968146] [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp] [ 264.968161] [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp] [ 264.968177] [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp] [ 264.968192] [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp] [ 264.968208] [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp] [ 264.968212] [<0000000001197942>] __sys_connect+0x21a/0x450 [ 264.968215] [<000000000119aff8>] sys_socketcall+0x3d0/0xb08 [ 264.968218] [<000000000184ea7a>] system_call+0x2a2/0x2c0 [...] Just like ip_finish_output2() does for IPv4, check that we have enough headroom in ip6_xmit(), and reallocate it if we don't. This issue is older than git history. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
While skb_push() makes the kernel panic if the skb headroom is less than the unaligned hardware header size, it will proceed normally in case we copy more than that because of alignment, and we'll silently corrupt adjacent slabs. In the case fixed by the previous patch, "ipv6: Check available headroom in ip6_xmit() even without options", we end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware header and write 16 bytes, starting 2 bytes before the allocated buffer. Always check we're not writing before skb->head and, if the headroom is not enough, warn and drop the packet. v2: - instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet (Eric Dumazet) - if we avoid the panic, though, we need to explicitly check the headroom before the memcpy(), otherwise we'll have corrupted slabs on a running kernel, after we warn - use __skb_push() instead of skb_push(), as the headroom check is already implemented here explicitly (Eric Dumazet) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio says: ==================== Fix slab out-of-bounds on insufficient headroom for IPv6 packets Patch 1/2 fixes a slab out-of-bounds occurring with short SCTP packets over IPv4 over L2TP over IPv6 on a configuration with relatively low HEADER_MAX. Patch 2/2 makes sure we avoid writing before the allocated buffer in neigh_hh_output() in case the headroom is enough for the unaligned hardware header size, but not enough for the aligned one, and that we warn if we hit this condition. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 624ca9c. This commit is completely bogus. The STACR register has two formats, old and new, depending on the version of the IP block used. There's a pair of device-tree properties that can be used to specify the format used: has-inverted-stacr-oc has-new-stacr-staopc What this commit did was to change the bit definition used with the old parts to match the new parts. This of course breaks the driver on all the old ones. Instead, the author should have set the appropriate properties in the device-tree for the variant used on his board. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1. Fixes: 6e8814c ("net/mlx4_en: Fix mixed PFC and Global pause user control requests") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes to support the 57500 devices have created this regression. The bnxt_hwrm_queue_qportcfg() call was moved to be called earlier before the RDMA support was determined, causing the CoS queues configuration to be set before knowing whether RDMA was supported or not. Fix it by moving it to the right place right after RDMA support is determined. Fixes: 98f04cf ("bnxt_en: Check context memory requirements from firmware.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The new 57500 chips use 1 NQ per MSIX vector, whereas legacy chips use 1 CP ring per MSIX vector. To better unify this, add a resv_irqs field to struct bnxt_hw_resc. On legacy chips, we initialize resv_irqs with resv_cp_rings. On new chips, we initialize it with the allocated MSIX resources. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The new 57500 chips have introduced the NQ structure in addition to the existing CP rings in all chips. We need to introduce a new bnxt_nq_rings_in_use(). On legacy chips, the 2 functions are the same and one will just call the other. On the new chips, they refer to the 2 separate ring structures. The new function is now called to determine the resource (NQ or CP rings) associated with MSIX that are in use. On 57500 chips, the RDMA driver does not use the CP rings so we don't need to do the subtraction adjustment. Fixes: 41e8d79 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The CP rings are accounted differently on the new 57500 chips. There must be enough CP rings for the sum of RX and TX rings on the new chips. The current logic may be over-estimating the RX and TX rings. The output parameter max_cp should be the maximum NQs capped by MSIX vectors available for networking in the context of 57500 chips. The existing code which uses CMPL rings capped by the MSIX vectors works most of the time but is not always correct. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes a regression on CoS queue setup, introduced recently by the 57500 new chip support patches. The rest are fixes related to ring and resource accounting on the new 57500 chips. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, duplicated rules are rejected only for skip_hw or "none", hence allowing users to push duplicates into HW for no reason. Use the flower tables to protect for that. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Paul Blakey <paulb@mellanox.com> Reported-by: Chris Mi <chrism@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…inux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two fixes: a large-system fix and an earlyprintk fix with certain resolutions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/earlyprintk/efi: Fix infinite loop on some screen widths x86/efi: Allocate e820 buffer before calling efi_exit_boot_service
…linux/kernel/git/tip/tip Pull kprobes fixes from Ingo Molnar: "Two kprobes fixes: a blacklist fix and an instruction patching related corruption fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes/x86: Blacklist non-attachable interrupt functions kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction
…inux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact fix and an LLVM workaround" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Drop implicit common-page-size linker flag x86/build: Fix compiler support check for CONFIG_RETPOLINE x86/boot: Clear RSDP address in boot_params for broken loaders
Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
pull bot
pushed a commit
that referenced
this pull request
Apr 10, 2020
…LAG_DETACH is set During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
pull bot
pushed a commit
that referenced
this pull request
Jan 5, 2021
Fix the following NULL pointer dereference in mt76u_status_worker that can occur if status thread runs before allocating tx queues [ 31.395373] BUG: kernel NULL pointer dereference, address: 000000000000002c [ 31.395769] #PF: supervisor read access in kernel mode [ 31.395985] #PF: error_code(0x0000) - not-present page [ 31.396178] PGD 0 P4D 0 [ 31.396277] Oops: 0000 [#1] SMP [ 31.396430] CPU: 3 PID: 337 Comm: mt76-usb-status Not tainted 5.10.0-rc1-kvm+ #49 [ 31.396703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-3.fc33 04/01/2014 [ 31.397048] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.397931] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.398118] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.398400] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.398668] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.398952] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.399235] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.399494] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.399767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.399991] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.400236] Call Trace: [ 31.400348] ? schedule+0x3e/0xa0 [ 31.400514] __mt76_worker_fn+0x71/0xa0 [ 31.400634] ? mt76_get_min_avg_rssi+0x110/0x110 [ 31.400827] kthread+0x118/0x130 [ 31.400984] ? __kthread_bind_mask+0x60/0x60 [ 31.401212] ret_from_fork+0x1f/0x30 [ 31.401353] Modules linked in: [ 31.401480] CR2: 000000000000002c [ 31.401627] ---[ end trace 8bf174505cc34851 ]--- [ 31.401798] RIP: 0010:mt76u_status_worker+0x2b/0x190 [ 31.402636] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282 [ 31.402829] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000 [ 31.403118] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8 [ 31.403424] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b [ 31.403689] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 31.403933] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300 [ 31.404209] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 31.404482] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.404726] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0 [ 31.405294] mt76x0u: probe of 1-1:1.0 failed with error -110 [ 31.406007] usb 1-1: USB disconnect, device number 2 [ 31.840756] usb 1-1: new high-speed USB device number 3 using xhci_hcd [ 32.461295] usb 1-1: reset high-speed USB device number 3 using xhci_hcd [ 32.659932] mt76x0u 1-1:1.0: ASIC revision: 76100002 MAC revision: 76502000 [ 33.197032] mt76x0u 1-1:1.0: EEPROM ver:02 fae:01 Fixes: 9daf27e ("mt76: mt76u: use dedicated thread for status work") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/cd44dc407cf3e5f27688105d4a75fb1c68e62b06.1607419147.git.lorenzo@kernel.org
pull bot
pushed a commit
that referenced
this pull request
May 5, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]