[pull] master from torvalds:master #47
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Return proper error code in case query for fixed factor parameter fails. This also fixes build warning for set but not used variable 'ret'. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Fixes: 3fde0e1 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a generic clk property for clks which are not intended to be used by the OS due to security restrictions put in place by firmware. For example, on some Qualcomm firmwares reading or writing certain clk registers causes the entire system to reboot, but on other firmwares reading and writing those same registers is required to make devices like QSPI work. Rather than adding one-off properties each time a new set of clks appears to be protected, let's add a generic clk property to describe any set of clks that shouldn't be touched by the OS. This way we never need to register the clks or use them in certain firmware configurations. Cc: Rob Herring <robh+dt@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Taniya Das <tdas@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Certain firmware configurations "protect" clks and cause the entire system to reboot when a non-secure OS such as Linux tries to read or write protected clk registers. But other firmware configurations allow reading or writing the same registers, and they may actually require that the OS use the otherwise locked down clks. Support the 'protected-clocks' property by never registering these protected clks with the common clk framework. This way, when firmware is protecting these clks we won't have the chance to ever read or write these registers and take down the entire system. Cc: Taniya Das <tdas@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When project is set, we should use inode limit minus the used count Signed-off-by: Ye Yin <dbyin@tencent.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
* clk-protected-binding: clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property
As of v4.20-rc1 probing the GCC driver on a SDM845 device with the standard security implementation causes an access violation and an immediate system restart. Use the protected-clocks property to mark the offending clocks protected for the MTP, in order to allow it to boot. Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3ea ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda ("clk: mmp: add basic support functions for DT support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The > comparison should be >= to prevent reading beyond the end of the clock[] array. (The clock[] array is allocated in zynqmp_clk_setup() and has clock_max_idx elements.) Fixes: 3fde0e1 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In commit e53c4b5, I *tried* to teach xfs to force writeback when we fzero/fpunch right up to EOF so that if EOF is in the middle of a page, the post-EOF part of the page gets zeroed before we return to userspace. Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1), which means that we totally fail to zero if we're fpunching and EOF is within the first page. Worse yet, the same PAGE_MASK thinko plagues the filemap_write_and_wait_range call, so we'd initiate writeback of the entire file, which (mostly) masked the thinko. Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE and the proper rounding macros. Fixes: e53c4b5 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_btree_sblock_verify_crc is a bool so should not be returning a failaddr_t; worse, if xfs_log_check_lsn fails it returns __this_address which looks like a boolean true (i.e. success) to the caller. (interestingly xfs_btree_lblock_verify_crc doesn't have the issue) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In overlayfs, ovl_remap_file_range calls vfs_clone_file_range on the lower filesystem's inode, passing through whatever remap flags it got from its caller. Since vfs_copy_file_range first tries a filesystem's remap function with REMAP_FILE_CAN_SHORTEN, this can get passed through to the second vfs_copy_file_range call, and this isn't an issue. Change the WARN_ON to look only for the DEDUP flag. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
In commit 4721a60, we tried to fix a problem wherein directio reads into a splice pipe will bounce EFAULT/EAGAIN all the way out to userspace by simulating a zero-byte short read. This happens because some directio read implementations (xfs) will call bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous reads, but as soon as we run out of pipe buffers that _get_pages call returns EFAULT, which the splice code translates to EAGAIN and bounces out to userspace. In that commit, the iomap code catches the EFAULT and simulates a zero-byte read, but that causes assertion errors on regular splice reads because xfs doesn't allow short directio reads. The brokenness is compounded by splice_direct_to_actor immediately bailing on do_splice_to returning <= 0 without ever calling ->actor (which empties out the pipe), so if userspace calls back we'll EFAULT again on the full pipe, and nothing ever gets copied. Therefore, teach splice_direct_to_actor to clamp its requests to the amount of free space in the pipe and remove the simulated short read from the iomap directio code. Fixes: 4721a60 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
…ULT) In commit 4721a60, we tried to fix a problem wherein directio reads into a splice pipe will bounce EFAULT/EAGAIN all the way out to userspace by simulating a zero-byte short read. This happens because some directio read implementations (xfs) will call bio_iov_iter_get_pages to grab pipe buffer pages and issue asynchronous reads, but as soon as we run out of pipe buffers that _get_pages call returns EFAULT, which the splice code translates to EAGAIN and bounces out to userspace. In that commit, the iomap code catches the EFAULT and simulates a zero-byte read, but that causes assertion errors on regular splice reads because xfs doesn't allow short directio reads. This causes infinite splice() loops and assertion failures on generic/095 on overlayfs because xfs only permit total success or total failure of a directio operation. The underlying issue in the pipe splice code has now been fixed by changing the pipe splice loop to avoid avoid reading more data than there is space in the pipe. Therefore, it's no longer necessary to simulate the short directio, so remove the hack from iomap. Fixes: 4721a60 ("iomap: dio data corruption and spurious errors when pipes fill") Reported-by: Murphy Zhou <jencce.kernel@gmail.com> Ranted-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The broken macros make the glibc compile error. If there is no __NR3264_fstat*, we should also removed related definitions. Reported-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Fixes: bf4b6a7 ("y2038: Remove stat64 family from default syscall set") [arnd: Both Marcin and Guo provided this patch to fix up my clearly broken commit, I applied the version with the better changelog.] Signed-off-by: Guo Ren <ren_guo@c-sky.com> Signed-off-by: Mao Han <han_mao@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
…ect_gfpmask" This reverts commit 89c83fb. This should have been done as part of 2f0799a ("mm, thp: restore node-local hugepage allocations"). The movement of the thp allocation policy from alloc_pages_vma() to alloc_hugepage_direct_gfpmask() was intended to only set __GFP_THISNODE for mempolicies that are not MPOL_BIND whereas the revert could set this regardless of mempolicy. While the check for MPOL_BIND between alloc_hugepage_direct_gfpmask() and alloc_pages_vma() was racy, that has since been removed since the revert. What is left is the possibility to use __GFP_THISNODE in policy_node() when it is unexpected because the special handling for hugepages in alloc_pages_vma() was removed as part of the consolidation. Secondly, prior to 89c83fb, alloc_pages_vma() implemented a somewhat different policy for hugepage allocations, which were allocated through alloc_hugepage_vma(). For hugepage allocations, if the allocating process's node is in the set of allowed nodes, allocate with __GFP_THISNODE for that node (for MPOL_PREFERRED, use that node with __GFP_THISNODE instead). This was changed for shmem_alloc_hugepage() to allow fallback to other nodes in 89c83fb as it did for new_page() in mm/mempolicy.c which is functionally different behavior and removes the requirement to only allocate hugepages locally. So this commit does a full revert of 89c83fb instead of the partial revert that was done in 2f0799a. The result is the same thp allocation policy for 4.20 that was in 4.19. Fixes: 89c83fb ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") Fixes: 2f0799a ("mm, thp: restore node-local hugepage allocations") Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
…fs-linux Pull xfs fixes from Darrick Wong: "Here are hopefully the last set of fixes for 4.20. There's a fix for a longstanding statfs reporting problem with project quotas, a correction for page cache invalidation behaviors when fallocating near EOF, and a fix for a broken metadata verifier return code. Finally, the most important fix is to the pipe splicing code (aka the generic copy_file_range fallback) to avoid pointless short directio reads by only asking the filesystem for as much data as there are available pages in the pipe buffer. Our previous fix (simulated short directio reads because the number of pages didn't match the length of the read requested) caused subtle problems on overlayfs, so that part is reverted. Anyhow, this series passes fstests -g all on xfs and overlay+xfs, and has passed 17 billion fsx operations problem-free since I started testing Summary: - Fix broken project quota inode counts - Fix incorrect PAGE_MASK/PAGE_SIZE usage - Fix incorrect return value in btree verifier - Fix WARN_ON remap flags false positive - Fix splice read overflows" * tag 'xfs-4.20-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: partially revert 4721a60 (simulated directio short read on EFAULT) splice: don't read more than available pipe space vfs: allow some remap flags to be passed to vfs_clone_file_range xfs: fix inverted return from xfs_btree_sblock_verify_crc xfs: fix PAGE_MASK usage in xfs_free_file_space fs/xfs: fix f_ffree value for statfs when project quota is set
…/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes this time:
- Introduce protected-clock DT binding to fix breakage on qcom
sdm845-mtp boards where the qspi clks introduced this merge window
cause the firmware on those boards to take down the system if we
try to read the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
clk: zynqmp: handle fixed factor param query error
…rnel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "Multiple people reported a bug I introduced in asm-generic/unistd.h in 4.20, this is the obvious bugfix to get glibc and others to correctly build again on new architectures that no longer provide the old fstatat64() family of system calls" * tag 'asm-generic-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: unistd.h: fixup broken macro include.
pull bot
pushed a commit
that referenced
this pull request
May 10, 2019
kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pull bot
pushed a commit
that referenced
this pull request
Jun 2, 2019
…slots According to Documentation/virtual/kvm/locking.txt, the srcu read lock should be taken when accessing the memslots of the VM. The XIVE KVM device needs to do so when configuring the page of the OS event queue of vCPU for a given priority and when marking the same page dirty before migration. This avoids warnings such as : [ 208.224882] ============================= [ 208.224884] WARNING: suspicious RCU usage [ 208.224889] 5.2.0-rc2-xive+ #47 Not tainted [ 208.224890] ----------------------------- [ 208.224894] ../include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage! [ 208.224896] other info that might help us debug this: [ 208.224898] rcu_scheduler_active = 2, debug_locks = 1 [ 208.224901] no locks held by qemu-system-ppc/3923. [ 208.224902] stack backtrace: [ 208.224907] CPU: 64 PID: 3923 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc2-xive+ #47 [ 208.224909] Call Trace: [ 208.224918] [c000200cdd98fa30] [c000000000be1934] dump_stack+0xe8/0x164 (unreliable) [ 208.224924] [c000200cdd98fa80] [c0000000001aec80] lockdep_rcu_suspicious+0x110/0x180 [ 208.224935] [c000200cdd98fb00] [c0080000075933a0] gfn_to_memslot+0x1c8/0x200 [kvm] [ 208.224943] [c000200cdd98fb40] [c008000007599600] gfn_to_pfn+0x28/0x60 [kvm] [ 208.224951] [c000200cdd98fb70] [c008000007599658] gfn_to_page+0x20/0x40 [kvm] [ 208.224959] [c000200cdd98fb90] [c0080000075b495c] kvmppc_xive_native_set_attr+0x8b4/0x1480 [kvm] [ 208.224967] [c000200cdd98fca0] [c00800000759261c] kvm_device_ioctl_attr+0x64/0xb0 [kvm] [ 208.224974] [c000200cdd98fcf0] [c008000007592730] kvm_device_ioctl+0xc8/0x110 [kvm] [ 208.224979] [c000200cdd98fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0 [ 208.224981] [c000200cdd98fdb0] [c000000000434724] ksys_ioctl+0x104/0x120 [ 208.224984] [c000200cdd98fe00] [c000000000434768] sys_ioctl+0x28/0x80 [ 208.224988] [c000200cdd98fe20] [c00000000000b888] system_call+0x5c/0x70 legoater@boss01:~$ Fixes: 13ce329 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration") Fixes: e6714bd ("KVM: PPC: Book3S HV: XIVE: Add a control to dirty the XIVE EQ pages") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
pull bot
pushed a commit
that referenced
this pull request
Jan 5, 2020
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d14 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
pull bot
pushed a commit
that referenced
this pull request
Sep 18, 2020
Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit 7c2e988 ("bpf: fix x64 JIT code generation for jmp to 1st insn") fixed an indentical bug on x86 when eBPF bounded loops were introduced. So let's fix it by creating the ctx->offset[] differently. Track the beginning of instruction and account for the extra instruction while calculating the arm instruction offsets. Fixes: 2589726 ("bpf: introduce bounded loops") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
pull bot
pushed a commit
that referenced
this pull request
Dec 24, 2020
The use of msleep() in the restart handler will cause scheduler to induce a context switch which is not desirable. This generates below warning on SDX55 when WDT is the only available restart source: [ 39.800188] reboot: Restarting system [ 39.804115] ------------[ cut here ]------------ [ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764 [ 39.812538] Modules linked in: [ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47 [ 39.824854] Hardware name: Generic DT based system [ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14) [ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0) [ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0) [ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8) [ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764) [ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640) [ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c) [ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4) [ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38) [ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc) [ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28) [ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84) [ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c) [ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0) [ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54) [ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0) [ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000 [ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000 [ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580 [ 39.980124] ---[ end trace 3f578288bad866e4 ]--- Hence, replace msleep() with mdelay() to fix this issue. Fixes: 05e487d ("watchdog: qcom: register a restart notifier") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201207060005.21293-1-manivannan.sadhasivam@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
pull bot
pushed a commit
that referenced
this pull request
May 5, 2021
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]