同步上去代码 #3
Merged
同步上去代码 #3
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Shbinging <bingshui@smail.nju.edu.cn>
ospfd: Fixup ospf_lsa.[ch] to properly spell out parameters for funct…
zebra: unlock node only after operation in zebra_free_rnh()
vtysh: fix SA warning, no need to call getenv() twice
clang-19's SA complains about unused initializers for this kind of
"switch (enum) { return string }" kind of code. Use direct string
return values to avoid the issue.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
In these cases the value assigned by the switch block is used directly rather than returned. Mark the initial/default value as used so clang-SA doesn't complain about it. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The flex-generated code is disabled for clang-SA builds already, but that means that function prototypes are missing too. Just add dummy function prototypes so clang-SA can process the file. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
clang-SA complains that ns->fd could be invalid. Add a guard. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
errno is only valid if there was an actual error. A zero return value isn't an error, it's either EOF or an empty datagram depending on context. Fix the logic. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
clang-SA complains that it's only partially initialized (because it's used with IPv4 only). The code later calls some AF-generic code, prompting clang-SA to complain that the non-IPv4 parts are used without being set. While this shouldn't happen, just initialize it fully. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The `buf` pointer is being updated as the parse goes along. It's not used after the last update, but I'd rather keep this in for consistency. Just make a note of it being unused. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a packet doesn't have an interface, we're gonna crash 2 lines below. An assert is a little more useful... and makes clang-SA not complain about it. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a create-config command is received, but the config is never applied, the config will be leaked on the next create-config command. This should theoretically never happen, but let's fix it anyway. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
non-blocking retries are already handled in `vtysh_client_receive()`. And by the point we're back in `vtysh_client_run()`, errno may have been overwritten by the close() call in vtysh_client_receive(). Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
While the logic here is perfectly fine, clang-SA doesn't understand that the fopen() and fclose() match up with each other. Just use a separate variable to make clang-SA happy. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`FILE *` objects are theoretically in an invalid state if you try to use them past their reporting EOF. Adjust the code to make it correct. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`errno` has its own semantics. Sometimes it is correct to write to it. This is not one of those cases - just use a separate `nl_errno`. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
`dirfd()` can theoretically return an error. Call it once and check the result. clang-SA: technically correct™. Ain't that the best kind of correct? Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Sigh. clang-SA doesn't want you to call read() while holding a mutex. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Display ipv4 mapped ipv6 addresses in the format ::ffff:A.B.C.D. Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Update IS-IS fuzz test to match corrected output after change in the display of IPv4 mapped IPv6 address. The update was performed using wuschl [1] like this: $ wuschl rebuild tests/isisd/test_fuzz_isis_tlv $ gzip -9 tests/isisd/test_fuzz_isis_tlv_tests.h [1] https://pypi.org/project/wuschl/ Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
bgpd: Implement match src-peer ... command
zebra: fix heap-use-after free on ns shutdown
…thop_num_fix *: Fix up improper handling of nexthops for nexthop tracking
lib, test: fix display ipv4 mapped ipv6 addresses
Fix several issues in sourcing AIGP attribute: 1) AIGP should not be set as default for a redistributed route or a static network. It should be set by config instead. 2) AIGP sourced by "set aigp-metric igp-metric" in a route-map does not set the correct value for a redistributed route. 3) When redistribute a connected route like loopback, the AGIP (with value 0) is sourced by "set aigp-metric igp-metric", but the attribute is not propagated as the attribute flag is not set. Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Add a new topotest for getting the aigp from the "igp-metric" for a redistributed route (ospf route in the test). Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
bgpd: fix several issues in sourcing AIGP attribute
ospfd: fix some ospf commands
In the processing of nssa, if the number of areas that need to be translated is greater than 0, then abr will be regarded as asbr, and it will be marked (0x3) in the flag of router lsa. When a certain area is set from nssa to a normal area, the areas that need to be translated may be reduced. The asbr should be re-interpreted as abr when the translated area is 0. Signed-off-by: Shbinging <bingshui@smail.nju.edu.cn>
In an attempt to make the code faster let's just pass in the prefix instead of having to do a lookup a majillion times again after we already have it. Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have this:
if ( (safi == SAFI_UNICAST) && ...)
do stuff
if ( (safi == SAFI_MPLS_VPN) && ... )
do stuff
this leads to having to test safi multiple times if safi is
SAFI_UNICAST. Let's make it a else if as that we know that
the safi is going to not change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
lib: Add ability to track time in individual routemaps
bgpd:support of color extended community color-only types
CID 1601478: Uninitialized variables (UNINIT) Using uninitialized value "mbefore.real.tv_usec" when calling "event_consumed_time". Fixes: 3e3a666 ("lib: Add ability to track time in individual routemaps") Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
bgpd:support tcp-mss for neighbor group
Bgp withdraw and unlikely
lib: Initialize mbefore for route_map_apply_ext()
A redistribute cmd can have a route-map attached to it and adding the match source-protocol to that route-map means BGP to filter which protocol routes to accept among the bunch of routes zebra is sending. Fixing this since this wasnt implemented earlier. Ticket :#4119692 Signed-off-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
…r_redist_cmd bgpd: Fix for match source-protocol in route-map for redistribute cmd
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
When 'no rpki' is requested and the rtrlib RPKI object was freed, bgpd is crashing. RPKI is configured in VRF red. > ip l set red down > ip l del red > printf 'conf\n vrf red\n no rpki' | vtysh > Core was generated by `/usr/bin/bgpd -A 127.0.0.1 -M snmp -M rpki -M bmp'. > Program terminated with signal SIGSEGV, Segmentation fault. > #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44 > 44 ./nptl/pthread_kill.c: No such file or directory. > [Current thread is 1 (Thread 0x7fb401f419c0 (LWP 190226))] > (gdb) bt > #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44 > #1 __pthread_kill_internal (signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:78 > #2 __GI___pthread_kill (threadid=140411103615424, signo=signo@entry=11) at ./nptl/pthread_kill.c:89 > #3 0x00007fb4021ad476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26 > FRRouting#4 0x00007fb4025ce22b in core_handler (signo=11, siginfo=0x7fff831b2d70, context=0x7fff831b2c40) at lib/sigevent.c:248 > FRRouting#5 <signal handler called> > FRRouting#6 rtr_mgr_remove_group (config=0x55fe8789f750, preference=11) at /build/make-pkg/output/source/DIST_RTRLIB/rtrlib/rtrlib/rtr_mgr.c:607 > FRRouting#7 0x00007fb40145f518 in rpki_delete_all_cache_nodes (rpki_vrf=0x55fe8789f4f0) at bgpd/bgp_rpki.c:442 > FRRouting#8 0x00007fb401463098 in no_rpki_magic (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at bgpd/bgp_rpki.c:1732 > FRRouting#9 0x00007fb40145c09a in no_rpki (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at ./bgpd/bgp_rpki_clippy.c:37 > FRRouting#10 0x00007fb402527abc in cmd_execute_command_real (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, up_level=0) at lib/command.c:984 > FRRouting#11 0x00007fb402527c35 in cmd_execute_command (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, vtysh=0) at lib/command.c:1043 > FRRouting#12 0x00007fb4025281e5 in cmd_execute (vty=0x55fe877f5130, cmd=0x55fe877fb8c0 "no rpki\n", matched=0x0, vtysh=0) at lib/command.c:1209 > FRRouting#13 0x00007fb4025f0aed in vty_command (vty=0x55fe877f5130, buf=0x55fe877fb8c0 "no rpki\n") at lib/vty.c:615 > FRRouting#14 0x00007fb4025f2a11 in vty_execute (vty=0x55fe877f5130) at lib/vty.c:1378 > FRRouting#15 0x00007fb4025f513d in vtysh_read (thread=0x7fff831b5fa0) at lib/vty.c:2373 > FRRouting#16 0x00007fb4025e9611 in event_call (thread=0x7fff831b5fa0) at lib/event.c:2011 > FRRouting#17 0x00007fb402566976 in frr_run (master=0x55fe871a14a0) at lib/libfrr.c:1212 > FRRouting#18 0x000055fe857829fa in main (argc=9, argv=0x7fff831b6218) at bgpd/bgp_main.c:549 Fixes: 8156765 ("bgpd: Add `no rpki` command") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
Fix crash when flex-algo is configured and mpls-te is disabled. > interface eth0 > ip router isis 1 > ! > router isis 1 > flex-algo 129 > dataplane sr-mpls > advertise-definition > #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140486233631168) at ./nptl/pthread_kill.c:44 > #1 __pthread_kill_internal (signo=11, threadid=140486233631168) at ./nptl/pthread_kill.c:78 > #2 __GI___pthread_kill (threadid=140486233631168, signo=signo@entry=11) at ./nptl/pthread_kill.c:89 > #3 0x00007fc5802e9476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26 > FRRouting#4 0x00007fc58076021f in core_handler (signo=11, siginfo=0x7ffd38d42470, context=0x7ffd38d42340) at lib/sigevent.c:248 > FRRouting#5 <signal handler called> > FRRouting#6 0x000055c527f798c9 in isis_link_params_update_asla (circuit=0x55c52aaed3c0, ifp=0x55c52a1044e0) at isisd/isis_te.c:176 > FRRouting#7 0x000055c527fb29da in isis_instance_flex_algo_create (args=0x7ffd38d43120) at isisd/isis_nb_config.c:2875 > FRRouting#8 0x00007fc58072655b in nb_callback_create (context=0x55c52ab1d2f0, nb_node=0x55c529f72950, event=NB_EV_APPLY, dnode=0x55c52ab06230, resource=0x55c52ab189f8, errmsg=0x7ffd38d43750 "", > errmsg_len=8192) at lib/northbound.c:1262 > FRRouting#9 0x00007fc580727625 in nb_callback_configuration (context=0x55c52ab1d2f0, event=NB_EV_APPLY, change=0x55c52ab189c0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) at lib/northbound.c:1662 > FRRouting#10 0x00007fc580727c39 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55c52ab1d2f0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) at lib/northbound.c:1794 > FRRouting#11 0x00007fc580725f77 in nb_candidate_commit_apply (transaction=0x55c52ab1d2f0, save_transaction=true, transaction_id=0x0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) > at lib/northbound.c:1131 > FRRouting#12 0x00007fc5807260d1 in nb_candidate_commit (context=..., candidate=0x55c529f0a730, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffd38d43750 "", errmsg_len=8192) > at lib/northbound.c:1164 > FRRouting#13 0x00007fc58072d220 in nb_cli_classic_commit (vty=0x55c52a0fc6b0) at lib/northbound_cli.c:51 > FRRouting#14 0x00007fc58072d839 in nb_cli_apply_changes_internal (vty=0x55c52a0fc6b0, > xpath_base=0x7ffd38d477f0 "/frr-isisd:isis/instance[area-tag='1'][vrf='default']/flex-algos/flex-algo[flex-algo='129']", clear_pending=false) at lib/northbound_cli.c:178 > FRRouting#15 0x00007fc58072dbcf in nb_cli_apply_changes (vty=0x55c52a0fc6b0, xpath_base_fmt=0x55c528014de0 "./flex-algos/flex-algo[flex-algo='%ld']") at lib/northbound_cli.c:234 > FRRouting#16 0x000055c527fd3403 in flex_algo_magic (self=0x55c52804f1a0 <flex_algo_cmd>, vty=0x55c52a0fc6b0, argc=2, argv=0x55c52ab00ec0, algorithm=129, algorithm_str=0x55c52ab120d0 "129") > at isisd/isis_cli.c:3752 > FRRouting#17 0x000055c527fc97cb in flex_algo (self=0x55c52804f1a0 <flex_algo_cmd>, vty=0x55c52a0fc6b0, argc=2, argv=0x55c52ab00ec0) at ./isisd/isis_cli_clippy.c:6445 > FRRouting#18 0x00007fc5806b9abc in cmd_execute_command_real (vline=0x55c52aaf78f0, vty=0x55c52a0fc6b0, cmd=0x0, up_level=0) at lib/command.c:984 > FRRouting#19 0x00007fc5806b9c35 in cmd_execute_command (vline=0x55c52aaf78f0, vty=0x55c52a0fc6b0, cmd=0x0, vtysh=0) at lib/command.c:1043 > FRRouting#20 0x00007fc5806ba1e5 in cmd_execute (vty=0x55c52a0fc6b0, cmd=0x55c52aae6bd0 "flex-algo 129\n", matched=0x0, vtysh=0) at lib/command.c:1209 > FRRouting#21 0x00007fc580782ae1 in vty_command (vty=0x55c52a0fc6b0, buf=0x55c52aae6bd0 "flex-algo 129\n") at lib/vty.c:615 > FRRouting#22 0x00007fc580784a05 in vty_execute (vty=0x55c52a0fc6b0) at lib/vty.c:1378 > FRRouting#23 0x00007fc580787131 in vtysh_read (thread=0x7ffd38d4ab10) at lib/vty.c:2373 > FRRouting#24 0x00007fc58077b605 in event_call (thread=0x7ffd38d4ab10) at lib/event.c:2011 > FRRouting#25 0x00007fc5806f8976 in frr_run (master=0x55c529df9b30) at lib/libfrr.c:1212 > FRRouting#26 0x000055c527f301bc in main (argc=5, argv=0x7ffd38d4ad58, envp=0x7ffd38d4ad88) at isisd/isis_main.c:350 > (gdb) f 6 > FRRouting#6 0x000055c527f798c9 in isis_link_params_update_asla (circuit=0x55c52aaed3c0, ifp=0x55c52a1044e0) at isisd/isis_te.c:176 > 176 list_delete_all_node(ext->aslas); > (gdb) p ext > $1 = (struct isis_ext_subtlvs *) 0x0 Fixes: ae27101 ("isisd: fix building asla at first flex-algo config") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
The following causes a isisd crash. > # cat config > affinity-map green bit-position 0 > router isis 1 > flex-algo 129 > affinity exclude-any green > # vtysh -f config > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > #1 0x00007f650cd32756 in core_handler (signo=6, siginfo=0x7ffc56f93070, context=0x7ffc56f92f40) at lib/sigevent.c:258 > #2 <signal handler called> > #3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f650c91c537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f650cd007c9 in nb_running_get_entry_worker (dnode=0x0, xpath=0x0, abort_if_not_found=true, rec_search=true) at lib/northbound.c:2531 > FRRouting#6 0x00007f650cd007f9 in nb_running_get_entry (dnode=0x55d9ad406e00, xpath=0x0, abort_if_not_found=true) at lib/northbound.c:2537 > FRRouting#7 0x000055d9ab302248 in isis_instance_flex_algo_affinity_set (args=0x7ffc56f947a0, type=2) at isisd/isis_nb_config.c:2998 > FRRouting#8 0x000055d9ab3027c0 in isis_instance_flex_algo_affinity_exclude_any_create (args=0x7ffc56f947a0) at isisd/isis_nb_config.c:3155 > FRRouting#9 0x00007f650ccfe284 in nb_callback_create (context=0x7ffc56f94d20, nb_node=0x55d9ad28b540, event=NB_EV_VALIDATE, dnode=0x55d9ad406e00, resource=0x0, errmsg=0x7ffc56f94de0 "", > errmsg_len=8192) at lib/northbound.c:1487 > FRRouting#10 0x00007f650ccff067 in nb_callback_configuration (context=0x7ffc56f94d20, event=NB_EV_VALIDATE, change=0x55d9ad406d40, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1884 > FRRouting#11 0x00007f650ccfda31 in nb_candidate_validate_code (context=0x7ffc56f94d20, candidate=0x55d9ad20d710, changes=0x7ffc56f94d38, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1246 > FRRouting#12 0x00007f650ccfdc67 in nb_candidate_commit_prepare (context=..., candidate=0x55d9ad20d710, comment=0x0, transaction=0x7ffc56f94da0, skip_validate=false, ignore_zero_change=false, > errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1317 > FRRouting#13 0x00007f650ccfdec4 in nb_candidate_commit (context=..., candidate=0x55d9ad20d710, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1381 > FRRouting#14 0x00007f650cd045ba in nb_cli_classic_commit (vty=0x55d9ad3f7490) at lib/northbound_cli.c:57 > FRRouting#15 0x00007f650cd04749 in nb_cli_pending_commit_check (vty=0x55d9ad3f7490) at lib/northbound_cli.c:96 > FRRouting#16 0x00007f650cc94340 in cmd_execute_command_real (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, up_level=0) at lib/command.c:1000 > FRRouting#17 0x00007f650cc94599 in cmd_execute_command (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, vtysh=0) at lib/command.c:1080 > FRRouting#18 0x00007f650cc94a0c in cmd_execute (vty=0x55d9ad3f7490, cmd=0x55d9ad401d30 "XFRR_end_configuration", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#19 0x00007f650cd523a4 in vty_command (vty=0x55d9ad3f7490, buf=0x55d9ad401d30 "XFRR_end_configuration") at lib/vty.c:625 > FRRouting#20 0x00007f650cd5413d in vty_execute (vty=0x55d9ad3f7490) at lib/vty.c:1388 > FRRouting#21 0x00007f650cd56353 in vtysh_read (thread=0x7ffc56f99370) at lib/vty.c:2400 > FRRouting#22 0x00007f650cd4b6fd in event_call (thread=0x7ffc56f99370) at lib/event.c:1996 > FRRouting#23 0x00007f650ccd1365 in frr_run (master=0x55d9ad103cf0) at lib/libfrr.c:1231 > FRRouting#24 0x000055d9ab29036e in main (argc=2, argv=0x7ffc56f99598, envp=0x7ffc56f995b0) at isisd/isis_main.c:354 Configuring the same in vtysh configure interactive mode works properly. When using "vtysh -f", the northbound compatible configuration is committed together whereas, in interactive mode, it committed line by line. In the first situation, in validation state nb_running_get_entry() fails because the area not yet in running. Do not use nb_running_get_entry() northbound validation state. Fixes: 893882e ("isisd: add isis flex-algo configuration backend") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
Fix a crash when modifying a route-map with set as-path exclude without as-path-access-list: > router(config)# route-map routemaptest deny 1 > router(config-route-map)# set as-path exclude 33 34 35 > router(config-route-map)# set as-path exclude as-path-access-list test > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > #1 0x00007fb3959327de in core_handler (signo=11, siginfo=0x7ffd122da530, context=0x7ffd122da400) at lib/sigevent.c:258 > #2 <signal handler called> > #3 0x000055ab2762a1bd in as_list_list_del (h=0x55ab27897680 <as_exclude_list_orphan>, item=0x55ab28204e20) at ./bgpd/bgp_aspath.h:77 > FRRouting#4 0x000055ab2762d1a8 in as_exclude_remove_orphan (ase=0x55ab28204e20) at bgpd/bgp_aspath.c:1574 > FRRouting#5 0x000055ab27550538 in route_aspath_exclude_free (rule=0x55ab28204e20) at bgpd/bgp_routemap.c:2366 > FRRouting#6 0x00007fb39591f00c in route_map_rule_delete (list=0x55ab28203498, rule=0x55ab28204170) at lib/routemap.c:1357 > FRRouting#7 0x00007fb39591f87c in route_map_add_set (index=0x55ab28203460, set_name=0x55ab276ad2aa "as-path exclude", set_arg=0x55ab281e4f70 "as-path-access-list test") at lib/routemap.c:1674 > FRRouting#8 0x00007fb39591d3f3 in generic_set_add (index=0x55ab28203460, command=0x55ab276ad2aa "as-path exclude", arg=0x55ab281e4f70 "as-path-access-list test", errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/routemap.c:533 > FRRouting#9 0x000055ab2755e78e in lib_route_map_entry_set_action_rmap_set_action_exclude_as_path_modify (args=0x7ffd122db290) at bgpd/bgp_routemap_nb_config.c:2427 > FRRouting#10 0x00007fb3958fe417 in nb_callback_modify (context=0x55ab28205aa0, nb_node=0x55ab27cb31e0, event=NB_EV_APPLY, dnode=0x55ab28202690, resource=0x55ab27c32148, errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/northbound.c:1538 > FRRouting#11 0x00007fb3958ff0ab in nb_callback_configuration (context=0x55ab28205aa0, event=NB_EV_APPLY, change=0x55ab27c32110, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:1888 > FRRouting#12 0x00007fb3958ff5e4 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55ab28205aa0, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:2016 > FRRouting#13 0x00007fb3958fddba in nb_candidate_commit_apply (transaction=0x55ab28205aa0, save_transaction=true, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1356 > FRRouting#14 0x00007fb3958fdef0 in nb_candidate_commit (context=..., candidate=0x55ab27c2c9a0, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1389 > FRRouting#15 0x00007fb3959045ba in nb_cli_classic_commit (vty=0x55ab281f6680) at lib/northbound_cli.c:57 > FRRouting#16 0x00007fb395904b5a in nb_cli_apply_changes_internal (vty=0x55ab281f6680, xpath_base=0x7ffd122dfd10 "/frr-route-map:lib/route-map[name='routemaptest']/entry[sequence='1']", > clear_pending=false) at lib/northbound_cli.c:184 > FRRouting#17 0x00007fb395904ebf in nb_cli_apply_changes (vty=0x55ab281f6680, xpath_base_fmt=0x0) at lib/northbound_cli.c:240 > --Type <RET> for more, q to quit, c to continue without paging-- > FRRouting#18 0x000055ab27557d2e in set_aspath_exclude_access_list_magic (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80, > as_path_filter_name=0x55ab28202040 "test") at bgpd/bgp_routemap.c:6397 > FRRouting#19 0x000055ab2754bdea in set_aspath_exclude_access_list (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80) > at ./bgpd/bgp_routemap_clippy.c:856 > FRRouting#20 0x00007fb39589435d in cmd_execute_command_real (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#21 0x00007fb3958944be in cmd_execute_command (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, vtysh=0) at lib/command.c:1062 > FRRouting#22 0x00007fb395894a0c in cmd_execute (vty=0x55ab281f6680, cmd=0x55ab28200f20 "set as-path exclude as-path-access-list test", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#23 0x00007fb39595242c in vty_command (vty=0x55ab281f6680, buf=0x55ab28200f20 "set as-path exclude as-path-access-list test") at lib/vty.c:625 > FRRouting#24 0x00007fb3959541c5 in vty_execute (vty=0x55ab281f6680) at lib/vty.c:1388 > FRRouting#25 0x00007fb3959563db in vtysh_read (thread=0x7ffd122e2bb0) at lib/vty.c:2400 > FRRouting#26 0x00007fb39594b785 in event_call (thread=0x7ffd122e2bb0) at lib/event.c:1996 > FRRouting#27 0x00007fb3958d1365 in frr_run (master=0x55ab27b56d70) at lib/libfrr.c:1231 > FRRouting#28 0x000055ab2747f1cc in main (argc=3, argv=0x7ffd122e2e08) at bgpd/bgp_main.c:555 Fixes: 094dcc3 ("bgpd: fix "bgp as-pah access-list" with "set aspath exclude" set/unset issues") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
Level 2 adjacency list is not supposed to be always set. > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > #1 0x00007f9f0353274f in core_handler (signo=6, siginfo=0x7ffe95260770, context=0x7ffe95260640) at lib/sigevent.c:258 > #2 <signal handler called> > #3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f9f0324e537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f9f035744ea in _zlog_assert_failed (xref=0x7f9f0362c6c0 <_xref.15>, extra=0x0) at lib/zlog.c:789 > FRRouting#6 0x00007f9f034d25ee in listnode_head (list=0x0) at lib/linklist.c:316 > FRRouting#7 0x000055cd65aaa481 in lib_interface_state_isis_adjacencies_adjacency_get_next (args=0x7ffe95261730) at isisd/isis_nb_state.c:101 > FRRouting#8 0x00007f9f034feadd in nb_callback_get_next (nb_node=0x55cd673c0190, parent_list_entry=0x55cd67570d30, list_entry=0x55cd6758f8a0) at lib/northbound.c:1748 > FRRouting#9 0x00007f9f0350bf07 in __walk (ys=0x55cd675782b0, is_resume=false) at lib/northbound_oper.c:1264 > FRRouting#10 0x00007f9f0350deaa in nb_op_walk_start (ys=0x55cd675782b0) at lib/northbound_oper.c:1741 > FRRouting#11 0x00007f9f0350e079 in nb_oper_iterate_legacy (xpath=0x55cd67595c60 "/frr-interface:lib", translator=0x0, flags=0, cb=0x0, cb_arg=0x0, tree=0x7ffe952621b0) at lib/northbound_oper.c:1803 > FRRouting#12 0x00007f9f03507661 in show_yang_operational_data_magic (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0, > xpath=0x55cd67595c60 "/frr-interface:lib", json=0x0, xml=0x0, translator_family=0x0, with_config=0x0) at lib/northbound_cli.c:1576 > FRRouting#13 0x00007f9f035037f0 in show_yang_operational_data (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0) > at ./lib/northbound_cli_clippy.c:906 > FRRouting#14 0x00007f9f0349435d in cmd_execute_command_real (vline=0x55cd6758e490, vty=0x55cd675a61f0, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#15 0x00007f9f03494477 in cmd_execute_command (vline=0x55cd67585340, vty=0x55cd675a61f0, cmd=0x0, vtysh=0) at lib/command.c:1053 > FRRouting#16 0x00007f9f03494a0c in cmd_execute (vty=0x55cd675a61f0, cmd=0x55cd67579040 "do show yang operational-data /frr-interface:lib", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#17 0x00007f9f0355239d in vty_command (vty=0x55cd675a61f0, buf=0x55cd67579040 "do show yang operational-data /frr-interface:lib") at lib/vty.c:625 > FRRouting#18 0x00007f9f03554136 in vty_execute (vty=0x55cd675a61f0) at lib/vty.c:1388 > FRRouting#19 0x00007f9f0355634c in vtysh_read (thread=0x7ffe952647a0) at lib/vty.c:2400 > FRRouting#20 0x00007f9f0354b6f6 in event_call (thread=0x7ffe952647a0) at lib/event.c:1996 > FRRouting#21 0x00007f9f034d1365 in frr_run (master=0x55cd67204da0) at lib/libfrr.c:1231 > FRRouting#22 0x000055cd65a3236e in main (argc=7, argv=0x7ffe952649c8, envp=0x7ffe95264a08) at isisd/isis_main.c:354 Fixes: 2a1c520 ("isisd: split northbound callbacks into multiple files") Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
```
==5445==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x7ff4c6bedb19 bp 0x7ffc95f2e400 sp 0x7ffc95f2e3c0 T0)
==5445==The signal is caused by a READ memory access.
==5445==Hint: address points to the zero page.
#0 0x7ff4c6bedb19 in hash_iterate lib/hash.c:246
#1 0x5618f41f5f59 in bgp_evpn_nh_finish bgpd/bgp_evpn_mh.c:4663
#2 0x5618f41dcbe8 in bgp_evpn_vrf_delete bgpd/bgp_evpn.c:7336
#3 0x5618f43bdd35 in bgp_delete bgpd/bgpd.c:4098
FRRouting#4 0x5618f417ef6e in bgp_exit bgpd/bgp_main.c:206
FRRouting#5 0x5618f417ef6e in sigint bgpd/bgp_main.c:164
FRRouting#6 0x7ff4c6cac6c4 in frr_sigevent_process lib/sigevent.c:117
FRRouting#7 0x7ff4c6cd8258 in event_fetch lib/event.c:1767
FRRouting#8 0x7ff4c6c0dcbc in frr_run lib/libfrr.c:1230
FRRouting#9 0x5618f418080d in main bgpd/bgp_main.c:555
FRRouting#10 0x7ff4c670c249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
FRRouting#11 0x7ff4c670c304 in __libc_start_main_impl ../csu/libc-start.c:360
FRRouting#12 0x5618f417ea20 in _start (/usr/lib/frr/bgpd+0x2e4a20)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV lib/hash.c:246 in hash_iterate
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
```
ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000aecf0 at pc 0x5555557ecdb9 bp 0x7fffffffe350 sp 0x7fffffffe340
READ of size 4 at 0x6160000aecf0 thread T0
#0 0x5555557ecdb8 in igmp_source_delete pimd/pim_igmpv3.c:340
#1 0x5555557ed475 in igmp_source_delete_expired pimd/pim_igmpv3.c:405
#2 0x5555557de574 in igmp_group_timer pimd/pim_igmp.c:1346
#3 0x7ffff7275421 in event_call lib/event.c:1996
FRRouting#4 0x7ffff7140797 in frr_run lib/libfrr.c:1237
FRRouting#5 0x5555557f5840 in main pimd/pim_main.c:166
FRRouting#6 0x7ffff6a54082 in __libc_start_main ../csu/libc-start.c:308
FRRouting#7 0x555555686eed in _start (/usr/lib/frr/pimd+0x132eed)
0x6160000aecf0 is located 112 bytes inside of 600-byte region [0x6160000aec80,0x6160000aeed8)
freed by thread T0 here:
#0 0x7ffff767b40f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:122
#1 0x7ffff716ed34 in qfree lib/memory.c:131
#2 0x5555557169ae in pim_channel_oil_free pimd/pim_oil.c:84
#3 0x555555717981 in pim_channel_oil_del pimd/pim_oil.c:199
FRRouting#4 0x55555573c42c in tib_sg_gm_prune pimd/pim_tib.c:196
FRRouting#5 0x5555557d6d04 in igmp_source_forward_stop pimd/pim_igmp.c:229
FRRouting#6 0x5555557d5855 in igmp_anysource_forward_stop pimd/pim_igmp.c:61
FRRouting#7 0x5555557de539 in igmp_group_timer pimd/pim_igmp.c:1344
FRRouting#8 0x7ffff7275421 in event_call lib/event.c:1996
FRRouting#9 0x7ffff7140797 in frr_run lib/libfrr.c:1237
FRRouting#10 0x5555557f5840 in main pimd/pim_main.c:166
FRRouting#11 0x7ffff6a54082 in __libc_start_main ../csu/libc-start.c:308
previously allocated by thread T0 here:
#0 0x7ffff767ba06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7ffff716ebe1 in qcalloc lib/memory.c:106
#2 0x555555716eb7 in pim_channel_oil_add pimd/pim_oil.c:133
#3 0x55555573b2b9 in tib_sg_oil_setup pimd/pim_tib.c:30
FRRouting#4 0x55555573bdd3 in tib_sg_gm_join pimd/pim_tib.c:119
FRRouting#5 0x5555557d6788 in igmp_source_forward_start pimd/pim_igmp.c:193
FRRouting#6 0x5555557d5771 in igmp_anysource_forward_start pimd/pim_igmp.c:51
FRRouting#7 0x5555557ecaa0 in group_exclude_fwd_anysrc_ifempty pimd/pim_igmpv3.c:310
FRRouting#8 0x5555557ef937 in toex_incl pimd/pim_igmpv3.c:839
FRRouting#9 0x5555557f00a2 in igmpv3_report_toex pimd/pim_igmpv3.c:938
FRRouting#10 0x5555557f543d in igmp_v3_recv_report pimd/pim_igmpv3.c:2000
FRRouting#11 0x5555557da2b4 in pim_igmp_packet pimd/pim_igmp.c:787
FRRouting#12 0x5555556ee46a in process_igmp_packet pimd/pim_mroute.c:763
FRRouting#13 0x5555556ee5f3 in pim_mroute_msg pimd/pim_mroute.c:787
FRRouting#14 0x5555556eef58 in mroute_read pimd/pim_mroute.c:877
FRRouting#15 0x7ffff7275421 in event_call lib/event.c:1996
FRRouting#16 0x7ffff7140797 in frr_run lib/libfrr.c:1237
FRRouting#17 0x5555557f5840 in main pimd/pim_main.c:166
FRRouting#18 0x7ffff6a54082 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: heap-use-after-free pimd/pim_igmpv3.c:340 in igmp_source_delete
Shadow bytes around the buggy address:
0x0c2c8000dd40: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000dd50: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000dd60: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000dd70: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000dd80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
=>0x0c2c8000dd90: fd fd fd fd fd fd fd fd fd fd fd fd fd fd[fd]fd
0x0c2c8000dda0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000ddb0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000ddc0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
0x0c2c8000ddd0: fd fd fd fd fd fd fd fd fd fd fd fa fa fa fa fa
0x0c2c8000dde0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
```
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Nov 11, 2024
The following ASAN issue has been observed: > ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000acba4 at pc 0x55910c5694d0 bp 0x7ffe3a8ac850 sp 0x7ffe3a8ac840 > READ of size 4 at 0x6160000acba4 thread T0 > #0 0x55910c5694cf in ctx_info_from_zns zebra/zebra_dplane.c:3315 > #1 0x55910c569696 in dplane_ctx_ns_init zebra/zebra_dplane.c:3331 > #2 0x55910c56bf61 in dplane_ctx_nexthop_init zebra/zebra_dplane.c:3680 > #3 0x55910c5711ca in dplane_nexthop_update_internal zebra/zebra_dplane.c:4490 > FRRouting#4 0x55910c571c5c in dplane_nexthop_delete zebra/zebra_dplane.c:4717 > FRRouting#5 0x55910c61e90e in zebra_nhg_uninstall_kernel zebra/zebra_nhg.c:3413 > FRRouting#6 0x55910c615d8a in zebra_nhg_decrement_ref zebra/zebra_nhg.c:1919 > FRRouting#7 0x55910c6404db in route_entry_update_nhe zebra/zebra_rib.c:454 > FRRouting#8 0x55910c64c904 in rib_re_nhg_free zebra/zebra_rib.c:2822 > FRRouting#9 0x55910c655be2 in rib_unlink zebra/zebra_rib.c:4212 > FRRouting#10 0x55910c6430f9 in zebra_rtable_node_cleanup zebra/zebra_rib.c:968 > FRRouting#11 0x7f26f275b8a9 in route_node_free lib/table.c:75 > FRRouting#12 0x7f26f275bae4 in route_table_free lib/table.c:111 > FRRouting#13 0x7f26f275b749 in route_table_finish lib/table.c:46 > FRRouting#14 0x55910c65db17 in zebra_router_free_table zebra/zebra_router.c:191 > FRRouting#15 0x55910c65dfb5 in zebra_router_terminate zebra/zebra_router.c:244 > FRRouting#16 0x55910c4f40db in zebra_finalize zebra/main.c:249 > FRRouting#17 0x7f26f2777108 in event_call lib/event.c:2011 > FRRouting#18 0x7f26f264180e in frr_run lib/libfrr.c:1212 > FRRouting#19 0x55910c4f49cb in main zebra/main.c:531 > FRRouting#20 0x7f26f2029d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f26f2029e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x55910c4b0114 in _start (/usr/lib/frr/zebra+0x1ae114) It happens with FRR using the kernel. During shutdown, the namespace identifier is attempted to be obtained by zebra, in an attempt to prepare zebra dataplane nexthop messages. Fix this by accessing the ns structure. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Dec 3, 2024
When shutdown a LAN-type circuit, and if the current device is not the DIS (assuming it is a level-1 device), the isis_circuit_down() function will not call the isis_dr_resign() function to clear the circuit->u.bc.run_dr_elect[0] bit (this bit is set on interfaces in the isis_run_dr() function). After switching the link to a P2P type, since u.p2p and u.bc form a union, and circuit->u.bc.snpa = "\000\000\000\000\000" and circuit->u.bc.run_dr_elect = "\001", this results in circuit->u.p2p.neighbor = 0x1000000000000. Consequently, the value of adj->sysid accesses a wild pointer, causing the current crash. The backtrace is as follows: (gdb) bt #0 0x00007fbd30e55fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0 #1 0x00007fbd30f76b29 in core_handler (signo=11, siginfo=0x7ffc60b7a270, context=0x7ffc60b7a140) at ../lib/sigevent.c:261 #2 <signal handler called> #3 0x00007fbd30dddba4 in ?? () from /lib/x86_64-linux-gnu/libc.so.6 FRRouting#4 0x0000562aec46617f in isis_spf_run_lfa (area=0x562aee3a56d0, spftree=0x562aee3a51a0) at ../isisd/isis_lfa.c:2403 FRRouting#5 0x0000562aec483854 in isis_run_spf_with_protection (area=0x562aee3a56d0, spftree=0x562aee3a51a0) at ../isisd/isis_spf.c:1891 FRRouting#6 0x0000562aec483b05 in isis_run_spf_cb (thread=0x7ffc60b7b000) at ../isisd/isis_spf.c:1953 FRRouting#7 0x00007fbd30f900bb in thread_call (thread=0x7ffc60b7b000) at ../lib/thread.c:1990 FRRouting#8 0x00007fbd30f2897b in frr_run (master=0x562aee0833c0) at ../lib/libfrr.c:1198 FRRouting#9 0x0000562aec454d6d in main (argc=5, argv=0x7ffc60b7b228, envp=0x7ffc60b7b258) at ../isisd/isis_main.c:273 (gdb) f 4 FRRouting#4 0x0000562aec46617f in isis_spf_run_lfa (area=0x562aee3a56d0, spftree=0x562aee3a51a0) at ../isisd/isis_lfa.c:2403 2403 ../isisd/isis_lfa.c: No such file or directory. (gdb) p circuit->u.p2p.neighbor $1 = (struct isis_adjacency *) 0x1000000000000 (gdb) p adj->sysid Cannot access memory at address 0x1000000000006 (gdb) p circuit->u.bc $2 = {snpa = "\000\000\000\000\000", run_dr_elect = "\001", t_run_dr = {0x0, 0x0}, t_send_lan_hello = {0x0, 0x0}, adjdb = {0x0, 0x0}, lan_neighs = {0x0, 0x0}, is_dr = "\000", l1_desig_is = "\000\000\000\000\000\000", l2_desig_is = "\000\000\000\000\000\000", t_refresh_pseudo_lsp = {0x0, 0x0}} (gdb) The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well. Signed-off-by: baozhen-H3C <bao.zhen@h3c.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Dec 3, 2024
… the neighbor status remains UP Test Scenario: RouterA and RouterB are in the same routing domain and have configured a P2P link. RouterA is configured with "is-type level-1" while RouterB is configured with "is-type level-1-2". They establish a level-1 UP neighborship. In this scenario, we expect that when RouterB's configuration is switched to "is-type level-2-only", the neighborship status on both RouterA and RouterB would be non-UP. However, RouterB still shows the neighbor as UP. Upon receiving a P2P Hello packet, the function "process_p2p_hello" is invoked. According to the ISO/IEC 10589 protocol specification, section 8.2.5.2 a) and tables 5 and 7, if the "iih->circ_type" of the neighbor's hello packet does not match one's own "circuit->is_type," we may choose to take no action. When establishing a neighborship for the first time, the neighbor's status can remain in the "Initializing" state. However, if the neighborship has already been established and one's own "circuit->is_type" changes, the neighbor's UP status cannot be reset. Therefore, when processing P2P Hello packets, we should be cognizant of changes in our own link adjacency type. Topotest has identified a core issue during testing. (gdb) bt "#0 0xb7efe579 in __kernel_vsyscall () \#1 0xb79f62f7 in ?? () \#2 0xbf981dd0 in ?? () \#3 <signal handler called> \FRRouting#4 0xb79f7722 in ?? () \FRRouting#5 0xb7ed8634 in _DYNAMIC () from /home/z15467/isis_core/usr/lib/i386-linux-gnu/frr/libfrr.so.0.0.0 \FRRouting#6 0x0001003c in ?? () \FRRouting#7 0x00010000 in ?? () \FRRouting#8 0xb7df3322 in _frr_mtx_lock (mutex=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/frr_pthread.h:255 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 \FRRouting#10 event_timer_remain_msec (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:727 \FRRouting#11 0x004fb4aa in _send_hello_sched (circuit=<optimized out>, threadp=0x2189de0, level=1, delay=<optimized out>) at ../isisd/isis_pdu.c:2116 \FRRouting#12 0x004e8dbc in isis_circuit_up (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:734 \FRRouting#13 0x004ea8f7 in isis_csm_state_change (event=<optimized out>, circuit=<optimized out>, arg=<optimized out>) at ../isisd/isis_csm.c:98 \FRRouting#14 0x004ea23f in isis_circuit_circ_type_set (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, circ_type=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:1578 \FRRouting#15 0x0053aefa in lib_interface_isis_network_type_modify (args=<optimized out>) at ../isisd/isis_nb_config.c:4190 \FRRouting#16 0xb7dbcc8d in nb_callback_modify (errmsg_len=8192, errmsg=0xbf982afc "", resource=0x2186220, dnode=<optimized out>, event=NB_EV_APPLY, nb_node=0x1fafe70, context=<optimized out>) at ../lib/northbound.c:1550 \FRRouting#17 nb_callback_configuration (context=<optimized out>, event=NB_EV_APPLY, change=<optimized out>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1900 \FRRouting#18 0xb7dbd646 in nb_transaction_process (errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, event=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:2028 \FRRouting#19 nb_candidate_commit_apply (transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1368 \FRRouting#20 0xb7dbdd68 in nb_candidate_commit (context=..., candidate=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, comment=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1401 \FRRouting#21 0xb7dc0cff in nb_cli_classic_commit (vty=vty@entry=0x21d6940) at ../lib/northbound_cli.c:57 \FRRouting#22 0xb7dc0f46 in nb_cli_apply_changes_internal (vty=vty@entry=0x21d6940, xpath_base=xpath_base@entry=0xbf986b7c "/frr-interface:lib/interface[name='r5-eth0']", clear_pending=clear_pending@entry=false) at ../lib/northbound_cli.c:184 \FRRouting#23 0xb7dc130b in nb_cli_apply_changes (vty=<optimized out>, xpath_base_fmt=<optimized out>) at ../lib/northbound_cli.c:240 \FRRouting#24 0x00542c1d in isis_network_magic (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<optimized out>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, no=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_cli.c:3101 \FRRouting#25 isis_network (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ./isisd/isis_cli_clippy.c:5499 \FRRouting#26 0xb7d6d8f1 in cmd_execute_command_real (vline=vline@entry=0x219afa0, vty=vty@entry=0x21d6940, cmd=cmd@entry=0x0, up_level=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1003 \FRRouting#27 0xb7d6d9e0 in cmd_execute_command (vline=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1061 \FRRouting#28 0xb7d6dc60 in cmd_execute (vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, matched=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1228 \FRRouting#29 0xb7dfb58a in vty_command (vty=vty@entry=0x21d6940, buf=0x21e0ff0 ' ' <repeats 12 times>, "isis network point-to-point") at ../lib/vty.c:625 \FRRouting#30 0xb7dfc560 in vty_execute (vty=vty@entry=0x21d6940) at ../lib/vty.c:1388 \FRRouting#31 0xb7dfdc8d in vtysh_read (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/vty.c:2400 \FRRouting#32 0xb7df4d47 in event_call (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:2019 \FRRouting#33 0xb7d9a831 in frr_run (master=<optimized out>) at ../lib/libfrr.c:1232 \FRRouting#34 0x004e4758 in main (argc=7, argv=0xbf989a24, envp=0xbf989a44) at ../isisd/isis_main.c:354 (gdb) f 9 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 734 ../lib/event.c: No such file or directory. (gdb) p pthread No symbol "pthread" in current context. (gdb) p thread $1 = (struct event *) 0x10000 When LAN links and P2P links share the` circuit->u` of a neighbor, if one link is no longer in use and the union is not cleared, the other link is unable to pass the non-empty check, resulting in accessing an invalid pointer. Unfortunately, for non-DIS devices in LAN links, `circuit->u.bc.run_dr_elect[x]` is essentially always 1, but in `isis_circuit_down()`,` circuit->u.bc.run_dr_elect[x] `will not be cleared because `circuit->u.bc.is_dr[x]` is always 0. Consequently, when switching to a P2P link, `isis_circuit_circ_type_set()` does not reset the link in a non-C_STATE_UP state, leading to subsequent accesses of `circuit->u.p2p.t_send_p2p_hello` resulting in a non-empty yet invalid address. I believe that in `isis_circuit_down()`, the LAN link should unconditionally clear `circuit->u.bc.run_dr_elect[x]`. Signed-off-by: zhou-run <zhou.run@h3c.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 10, 2025
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > #1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > #2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > #3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > #1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > #2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > #3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > #1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > #2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > #3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 10, 2025
The following memory leak can be observed when turning off and on the BGP vrf interface. > ==706056==ERROR: LeakSanitizer: detected memory leaks > > Direct leak of 78 byte(s) in 1 object(s) allocated from: > #0 0x7fbf5f6b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > #1 0x7fbf5f0771f8 in qmalloc lib/memory.c:101 > #2 0x7fbf5bdde610 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2042 > #3 0x7fbf5bdde8aa in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2079 > FRRouting#4 0x7fbf5bdeaa1c in bmp_vrf_itf_state_changed bgpd/bgp_bmp.c:3204 > FRRouting#5 0x562740f0d83f in hook_call_bgp_vrf_status_changed bgpd/bgp_zebra.c:64 > FRRouting#6 0x562740f0ee28 in bgp_ifp_up bgpd/bgp_zebra.c:234 > FRRouting#7 0x7fbf5f01c193 in hook_call_if_up lib/if.c:57 > FRRouting#8 0x7fbf5f01d09a in if_up_via_zapi lib/if.c:203 > FRRouting#9 0x7fbf5f1d6f54 in zclient_interface_up lib/zclient.c:2671 > FRRouting#10 0x7fbf5f1e3e5a in zclient_read lib/zclient.c:4624 > FRRouting#11 0x7fbf5f18078d in event_call lib/event.c:1996 > FRRouting#12 0x7fbf5f048933 in frr_run lib/libfrr.c:1232 > FRRouting#13 0x562740c0cae1 in main bgpd/bgp_main.c:557 > FRRouting#14 0x7fbf5ea29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > Direct leak of 78 byte(s) in 1 object(s) allocated from: > #0 0x7fbf5f6b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > #1 0x7fbf5f0771f8 in qmalloc lib/memory.c:101 > #2 0x7fbf5bdde610 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2042 > #3 0x7fbf5bdde8aa in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2079 > FRRouting#4 0x7fbf5bdd4839 in bmp_send_peerup_vrf bgpd/bgp_bmp.c:627 > FRRouting#5 0x7fbf5bddb0d3 in bmp_wrfill bgpd/bgp_bmp.c:1590 > FRRouting#6 0x7fbf5f10841f in pullwr_run lib/pullwr.c:197 > FRRouting#7 0x7fbf5f18078d in event_call lib/event.c:1996 > FRRouting#8 0x7fbf5f048933 in frr_run lib/libfrr.c:1232 > FRRouting#9 0x562740c0cae1 in main bgpd/bgp_main.c:557 > FRRouting#10 0x7fbf5ea29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Fix this by freeing the previous open_tx and open_rx contexts before setting up the new one. Also at deletion of peer, free the open_rx context. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 24, 2025
The following memory leak is observed when running bgp_bmp test. > ==614841==ERROR: LeakSanitizer: detected memory leaks > > Direct leak of 81 byte(s) in 1 object(s) allocated from: > #0 0x7f0e9f2b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > #1 0x7f0e9ec771f8 in qmalloc lib/memory.c:101 > #2 0x7f0e9e5a2f89 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2211 > #3 0x7f0e9e5a31a8 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2247 > FRRouting#4 0x7f0e9e5b0325 in bmp_bgp_attribute_updated_instance bgpd/bgp_bmp.c:3476 > FRRouting#5 0x7f0e9e5b0661 in bmp_bgp_attribute_updated bgpd/bgp_bmp.c:3526 > FRRouting#6 0x7f0e9e5b08ae in bmp_routerid_update bgpd/bgp_bmp.c:3547 > FRRouting#7 0x55cdc4bcbd88 in hook_call_bgp_routerid_update bgpd/bgpd.c:89 > FRRouting#8 0x55cdc4bccf0b in bgp_router_id_set bgpd/bgpd.c:305 > FRRouting#9 0x55cdc4bcd87d in bgp_router_id_zebra_bump bgpd/bgpd.c:393 > FRRouting#10 0x55cdc4ba87d5 in bgp_router_id_update bgpd/bgp_zebra.c:99 > FRRouting#11 0x7f0e9ede3f0b in zclient_read lib/zclient.c:4626 > FRRouting#12 0x7f0e9ed8074d in event_call lib/event.c:1996 > FRRouting#13 0x7f0e9ec48933 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x55cdc48a9a27 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f0e9e629d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > Direct leak of 81 byte(s) in 1 object(s) allocated from: > #0 0x7f0e9f2b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > #1 0x7f0e9ec771f8 in qmalloc lib/memory.c:101 > #2 0x7f0e9e5a2ed8 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2207 > #3 0x7f0e9e5a31a8 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2247 > FRRouting#4 0x7f0e9e5b0325 in bmp_bgp_attribute_updated_instance bgpd/bgp_bmp.c:3476 > FRRouting#5 0x7f0e9e5b0661 in bmp_bgp_attribute_updated bgpd/bgp_bmp.c:3526 > FRRouting#6 0x7f0e9e5b08ae in bmp_routerid_update bgpd/bgp_bmp.c:3547 > FRRouting#7 0x55cdc4bcbd88 in hook_call_bgp_routerid_update bgpd/bgpd.c:89 > FRRouting#8 0x55cdc4bccf0b in bgp_router_id_set bgpd/bgpd.c:305 > FRRouting#9 0x55cdc4bcd87d in bgp_router_id_zebra_bump bgpd/bgpd.c:393 > FRRouting#10 0x55cdc4ba87d5 in bgp_router_id_update bgpd/bgp_zebra.c:99 > FRRouting#11 0x7f0e9ede3f0b in zclient_read lib/zclient.c:4626 > FRRouting#12 0x7f0e9ed8074d in event_call lib/event.c:1996 > FRRouting#13 0x7f0e9ec48933 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x55cdc48a9a27 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f0e9e629d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > Direct leak of 64 byte(s) in 1 object(s) allocated from: > #0 0x7f0e9f2b4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 > #1 0x7f0e9ec77235 in qcalloc lib/memory.c:106 > #2 0x7f0e9e5a498d in bmp_imported_bgp_get bgpd/bgp_bmp.c:2441 > #3 0x7f0e9e5acbed in bmp_import_vrf_magic bgpd/bgp_bmp.c:2855 > FRRouting#4 0x7f0e9e5a7f97 in bmp_import_vrf bgpd/bgp_bmp_clippy.c:147 > FRRouting#5 0x7f0e9ebb1178 in cmd_execute_command_real lib/command.c:1003 > FRRouting#6 0x7f0e9ebb1505 in cmd_execute_command lib/command.c:1062 > FRRouting#7 0x7f0e9ebb21d7 in cmd_execute lib/command.c:1228 > FRRouting#8 0x7f0e9ed90bf0 in vty_command lib/vty.c:626 > FRRouting#9 0x7f0e9ed95ad5 in vty_execute lib/vty.c:1389 > FRRouting#10 0x7f0e9ed9c01e in vtysh_read lib/vty.c:2408 > FRRouting#11 0x7f0e9ed8074d in event_call lib/event.c:1996 > FRRouting#12 0x7f0e9ec48933 in frr_run lib/libfrr.c:1232 > FRRouting#13 0x55cdc48a9a27 in main bgpd/bgp_main.c:555 > FRRouting#14 0x7f0e9e629d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > Direct leak of 6 byte(s) in 1 object(s) allocated from: > #0 0x7f0e9f25b9a7 in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:454 > #1 0x7f0e9ec772fa in qstrdup lib/memory.c:118 > #2 0x55cdc4b57d54 in af_rd_vpn_export_magic bgpd/bgp_vty.c:9814 > #3 0x55cdc4b288d7 in af_rd_vpn_export bgpd/bgp_vty_clippy.c:3493 > FRRouting#4 0x7f0e9ebb1178 in cmd_execute_command_real lib/command.c:1003 > FRRouting#5 0x7f0e9ebb1505 in cmd_execute_command lib/command.c:1062 > FRRouting#6 0x7f0e9ebb21d7 in cmd_execute lib/command.c:1228 > FRRouting#7 0x7f0e9ed90bf0 in vty_command lib/vty.c:626 > FRRouting#8 0x7f0e9ed95ad5 in vty_execute lib/vty.c:1389 > FRRouting#9 0x7f0e9ed9c01e in vtysh_read lib/vty.c:2408 > FRRouting#10 0x7f0e9ed8074d in event_call lib/event.c:1996 > FRRouting#11 0x7f0e9ec48933 in frr_run lib/libfrr.c:1232 > FRRouting#12 0x55cdc48a9a27 in main bgpd/bgp_main.c:555 > FRRouting#13 0x7f0e9e629d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > Indirect leak of 5 byte(s) in 1 object(s) allocated from: > #0 0x7f0e9f25b9a7 in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:454 > #1 0x7f0e9ec772fa in qstrdup lib/memory.c:118 > #2 0x7f0e9e5a49ae in bmp_imported_bgp_get bgpd/bgp_bmp.c:2443 > #3 0x7f0e9e5acbed in bmp_import_vrf_magic bgpd/bgp_bmp.c:2855 > FRRouting#4 0x7f0e9e5a7f97 in bmp_import_vrf bgpd/bgp_bmp_clippy.c:147 > FRRouting#5 0x7f0e9ebb1178 in cmd_execute_command_real lib/command.c:1003 > FRRouting#6 0x7f0e9ebb1505 in cmd_execute_command lib/command.c:1062 > FRRouting#7 0x7f0e9ebb21d7 in cmd_execute lib/command.c:1228 > FRRouting#8 0x7f0e9ed90bf0 in vty_command lib/vty.c:626 > FRRouting#9 0x7f0e9ed95ad5 in vty_execute lib/vty.c:1389 > FRRouting#10 0x7f0e9ed9c01e in vtysh_read lib/vty.c:2408 > FRRouting#11 0x7f0e9ed8074d in event_call lib/event.c:1996 > FRRouting#12 0x7f0e9ec48933 in frr_run lib/libfrr.c:1232 > FRRouting#13 0x55cdc48a9a27 in main bgpd/bgp_main.c:555 > FRRouting#14 0x7f0e9e629d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > SUMMARY: AddressSanitizer: 237 byte(s) leaked in 5 allocation(s). Fix this by freeing the missing memory block that helps building the open message to send to remote bmp collector. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 24, 2025
> ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f73891cb146 bp 0x7ffca86584c0 sp 0x7ffca8658490 T0) > ==837617==The signal is caused by a READ memory access. > ==837617==Hint: address points to the zero page. > #0 0x7f73891cb146 in bmp_targets_const_next bgpd/bgp_bmp.c:149 > #1 0x7f73891cb1a5 in bmp_targets_next bgpd/bgp_bmp.c:149 > #2 0x7f73891e875a in _bmp_vrf_state_changed_internal bgpd/bgp_bmp.c:3520 > #3 0x7f73891e8922 in bmp_vrf_itf_state_changed bgpd/bgp_bmp.c:3566 > FRRouting#4 0x55e511af8d1b in hook_call_bgp_vrf_status_changed bgpd/bgp_zebra.c:64 > FRRouting#5 0x55e511afa304 in bgp_ifp_up bgpd/bgp_zebra.c:234 > FRRouting#6 0x7f738981c193 in hook_call_if_up lib/if.c:57 > FRRouting#7 0x7f738981d09a in if_up_via_zapi lib/if.c:203 > FRRouting#8 0x7f73899d6f54 in zclient_interface_up lib/zclient.c:2671 > FRRouting#9 0x7f73899e3e5a in zclient_read lib/zclient.c:4624 > FRRouting#10 0x7f738998078d in event_call lib/event.c:1996 > FRRouting#11 0x7f7389848933 in frr_run lib/libfrr.c:1232 > FRRouting#12 0x55e5117f7ae1 in main bgpd/bgp_main.c:557 > FRRouting#13 0x7f7389229d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#14 0x7f7389229e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#15 0x55e5117f4234 in _start (/usr/lib/frr/bgpd+0x2ec234) Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 24, 2025
Some bgp evpn memory contexts are not freed at the end of the bgp process. > ================================================================= > ==1208677==ERROR: LeakSanitizer: detected memory leaks > > Direct leak of 96 byte(s) in 2 object(s) allocated from: > #0 0x7f93ad4b4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 > #1 0x7f93ace77233 in qcalloc lib/memory.c:106 > #2 0x563bb68f4df1 in process_type5_route bgpd/bgp_evpn.c:5084 > #3 0x563bb68fb663 in bgp_nlri_parse_evpn bgpd/bgp_evpn.c:6302 > FRRouting#4 0x563bb69ea2a9 in bgp_nlri_parse bgpd/bgp_packet.c:347 > FRRouting#5 0x563bb69f7716 in bgp_update_receive bgpd/bgp_packet.c:2482 > FRRouting#6 0x563bb6a04d3b in bgp_process_packet bgpd/bgp_packet.c:4091 > FRRouting#7 0x7f93acf8082d in event_call lib/event.c:1996 > FRRouting#8 0x7f93ace48931 in frr_run lib/libfrr.c:1232 > FRRouting#9 0x563bb6880ae1 in main bgpd/bgp_main.c:557 > FRRouting#10 0x7f93ac829d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Actually, the bgp evpn context may noy be used if adj rib in is unused. This may lead to memory leaks. Fix this by freeing the context in those corner cases. Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Jan 24, 2025
When running the bgp_evpn_rt5 setup with unified config, memory leak about a non deleted BGP instance happens. > root@ubuntu2204hwe:~/frr/tests/topotests/bgp_evpn_rt5# cat /tmp/topotests/bgp_evpn_rt5.test_bgp_evpn/r1.asan.bgpd.1164105 > > ================================================================= > ==1164105==ERROR: LeakSanitizer: detected memory leaks > > Indirect leak of 12496 byte(s) in 1 object(s) allocated from: > #0 0x7f358eeb4a57 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 > #1 0x7f358e877233 in qcalloc lib/memory.c:106 > #2 0x55d06c95680a in bgp_create bgpd/bgpd.c:3405 > #3 0x55d06c95a7b3 in bgp_get bgpd/bgpd.c:3805 > FRRouting#4 0x55d06c87a9b5 in bgp_get_vty bgpd/bgp_vty.c:603 > FRRouting#5 0x55d06c68dc71 in bgp_evpn_local_l3vni_add bgpd/bgp_evpn.c:7032 > FRRouting#6 0x55d06c92989b in bgp_zebra_process_local_l3vni bgpd/bgp_zebra.c:3204 > FRRouting#7 0x7f358e9e3feb in zclient_read lib/zclient.c:4626 > FRRouting#8 0x7f358e98082d in event_call lib/event.c:1996 > FRRouting#9 0x7f358e848931 in frr_run lib/libfrr.c:1232 > FRRouting#10 0x55d06c60eae1 in main bgpd/bgp_main.c:557 > FRRouting#11 0x7f358e229d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Actually, a BGP VRF Instance is created in auto mode when creating the global BGP instance for the L3 VNI. And again, an other BGP VRF instance is created. Fix this by ensuring that a non existing BGP instance is not present. If it is present, and with auto mode or in hidden mode, then override the AS value. Fixes: f153b9a ("bgpd: Ignore auto created VRF BGP instances") Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
guoguojia2021
pushed a commit
that referenced
this pull request
Feb 4, 2025
When staticd receives a `ZAPI_SRV6_SID_RELEASED` notification from SRv6
SID Manager, it tries to unset the validity flag of `sid`. But since
the `sid` variable is NULL, we get a NULL pointer dereference.
```
=================================================================
==13815==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000060 (pc 0xc14b813d9eac bp 0xffffcb135a40 sp 0xffffcb135a40 T0)
==13815==The signal is caused by a READ memory access.
==13815==Hint: address points to the zero page.
#0 0xc14b813d9eac in static_zebra_srv6_sid_notify staticd/static_zebra.c:1172
#1 0xe44e7aa2c194 in zclient_read lib/zclient.c:4746
#2 0xe44e7a9b69d8 in event_call lib/event.c:1984
#3 0xe44e7a85ac28 in frr_run lib/libfrr.c:1246
FRRouting#4 0xc14b813ccf98 in main staticd/static_main.c:193
FRRouting#5 0xe44e7a4773f8 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
FRRouting#6 0xe44e7a4774c8 in __libc_start_main_impl ../csu/libc-start.c:392
FRRouting#7 0xc14b813cc92c in _start (/usr/lib/frr/staticd+0x1c92c)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV staticd/static_zebra.c:1172 in static_zebra_srv6_sid_notify
==13815==ABORTING
```
This commit fixes the problem by doing a SID lookup first. If the SID
can't be found, we log an error and return. If the SID is found, we go
ahead and unset the validity flag.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
xx