Merge pull request #18403 from Ultimaker/CURA-11645

Re-introduce `prime_tower_enable`

cura/BuildVolume.py

@@ -880,7 +880,7 @@ def _computeDisallowedAreasPrinted(self, used_extruders):
             result[extruder.getId()] = []
 
         # Currently, the only normally printed object is the prime tower.
-        if self._global_container_stack.getProperty("prime_tower_mode", "value") != 'none':
+        if self._global_container_stack.getProperty("prime_tower_enable", "value"):
             prime_tower_size = self._global_container_stack.getProperty("prime_tower_size", "value")
             machine_width = self._global_container_stack.getProperty("machine_width", "value")
             machine_depth = self._global_container_stack.getProperty("machine_depth", "value")
@@ -1208,7 +1208,7 @@ def _clamp(self, value, min_value, max_value):
     _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_layers", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap", "layer_0_z_overlap"]
     _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"]
     _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "prime_blob_enable"]
-    _tower_settings = ["prime_tower_mode", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"]
+    _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"]
     _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"]
     _distance_settings = ["infill_wipe_dist", "travel_avoid_distance", "support_offset", "support_enable", "travel_avoid_other_parts", "travel_avoid_supports", "wall_line_count", "wall_line_width_0", "wall_line_width_x"]
     _extruder_settings = ["support_enable", "support_bottom_enable", "support_roof_enable", "support_infill_extruder_nr", "support_extruder_nr_layer_0", "support_bottom_extruder_nr", "support_roof_extruder_nr", "brim_line_count", "skirt_brim_extruder_nr", "raft_base_extruder_nr", "raft_interface_extruder_nr", "raft_surface_extruder_nr", "adhesion_type"] #Settings that can affect which extruders are used.

plugins/LegacyProfileReader/DictionaryOfDoom.json

@@ -68,7 +68,7 @@
         "meshfix_keep_open_polygons": "fix_horrible_use_open_bits",
         "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"",
         "magic_spiralize": "spiralize",
-        "prime_tower_mode": "\"normal\" if wipe_tower else \"none\"",
+        "prime_tower_enable": "wipe_tower",
         "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))",
         "ooze_shield_enabled": "ooze_shield",
         "skin_overlap": "fill_overlap"

plugins/SliceInfoPlugin/SliceInfo.py

@@ -263,6 +263,7 @@ def _onWriteStarted(self, output_device):
             print_settings["retraction_enable"] = global_stack.getProperty("retraction_enable", "value")
 
             # Prime tower settings
+            print_settings["prime_tower_enable"] = global_stack.getProperty("prime_tower_enable", "value")
             print_settings["prime_tower_mode"] = global_stack.getProperty("prime_tower_mode", "value")
 
             # Infill settings

resources/definitions/atmat_signal_pro_base.def.json

@@ -110,7 +110,7 @@
         "min_infill_area": { "value": "5.0" },
         "minimum_polygon_circumference": { "value": "0.2" },
         "optimize_wall_printing_order": { "value": "True" },
-        "prime_tower_mode": { "value": "'normal'" },
+        "prime_tower_enable": { "value": "True" },
         "retraction_amount": { "value": "1" },
         "retraction_combing": { "value": "'noskin'" },
         "retraction_combing_max_distance": { "value": "10" },

resources/definitions/deltacomb_dc20flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/deltacomb_dc21flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": true },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/deltacomb_dc30flux.def.json

@@ -31,8 +31,8 @@
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
         "material_standby_temperature": { "value": "material_print_temperature" },
+        "prime_tower_enable": { "value": "True" },
         "prime_tower_min_volume": { "value": "50" },
-        "prime_tower_mode": { "value": "'normal'" },
         "switch_extruder_retraction_amount": { "value": "0" }
     }
 }

resources/definitions/dxu_dual.def.json

@@ -5,6 +5,7 @@
     "overrides":
     {
         "machine_end_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" },
-        "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" }
+        "machine_start_gcode": { "value": "\"\"  if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" },
+        "prime_tower_enable": { "default_value": true }
     }
 }

resources/definitions/elegoo_neptune_2D.def.json

@@ -55,6 +55,7 @@
             "settable_per_extruder": false
         },
         "prime_blob_enable": { "default_value": false },
+        "prime_tower_enable": { "default_value": true },
         "prime_tower_min_volume": { "default_value": 90 },
         "prime_tower_size": { "default_value": 30 },
         "raft_airgap": { "default_value": 0.25 },