Merge pull request #138 from RIOT-OS/ipv6_fragmentation

task0{3,4,7}: Add tests for IPv6 fragmentation

03-single-hop-ipv6-icmp/03-single-hop-ipv6-icmp.md

@@ -80,3 +80,20 @@ one native node.
 All nodes are still running, reachable, and the packet buffer is empty 10
 seconds after completions (use module `gnrc_pktbuf_cmd`).
 Packet loss is irrelevant in this stress test.
+
+Task #06 - ICMPv6 link-local echo on native (IPv6 fragmentation)
+================================================================
+### Description
+
+ICMPv6 echo request/reply exchange between two native nodes (make sure module
+`gnrc_ipv6_ext_frag` is included and the packet buffer is large enough to handle
+both the fragmented and reassembled requests/replies).
+* Stack configuration: IPv6 (default)
+* Count:                  1000
+* Interval:               100ms
+* Payload:                2kB
+* Destination Address:    Link local unicast (fe80::.../64)
+
+### Result
+
+<1% packets lost on the pinging node.

04-single-hop-6lowpan-icmp/04-single-hop-6lowpan-icmp.md

@@ -151,3 +151,22 @@ to one iotlab-m3.
 All nodes are still running, reachable, and the packet buffer is empty 3 seconds
 after completions (use module `gnrc_pktbuf_cmd`).
 Packet loss is irrelevant in this stress test.
+
+Task #10 (Exprimental) - ICMPv6 echo with large payload (IPv6 fragmentation)
+============================================================================
+### Description
+
+ICMPv6 echo request/reply exchange between two nodes (make sure module
+`gnrc_ipv6_ext_frag` is included and the packet buffer is large enough to handle
+both the fragmented and reassembled requests/replies).
+* Stack configuration:    6LoWPAN (default)
+* Channel:                26
+* Count:                  200
+* Interval:               600ms
+* Payload:                2kB
+* Destination Address:    Link local unicast (fe80::.../64)
+
+### Result
+
+<10% packets lost on the pinging node.
+No leaks in the packet buffer (check with `gnrc_pktbuf_cmd`).

04-single-hop-6lowpan-icmp/example_test_guide.md

@@ -166,3 +166,16 @@ to one iotlab-m3.
 1. Ping from many srcs to the dest `ping6 -c 1000 -i 200 -s 1232 <ll_addr>`
 2. Record the packet loss and timings, it should be less then 10%
 3. check the packet buffer with `pktbuf`
+
+Task #10 (Exprimental) - ICMPv6 echo with large payload (IPv6 fragmentation)
+============================================================================
+### Description
+
+ICMPv6 echo request/reply exchange between two nodes (make sure module
+`gnrc_ipv6_ext_frag` is included and the packet buffer is large enough to handle
+both the fragmented and reassembled requests/replies).
+1. Compile with `CFLAGS+=GNRC_PKTBUF_SIZE=8192` and
+   `USEMODULE += gnrc_ipv6_ext_frag`.
+2. Ping from the src to the dest `ping6 -c 200 -i 600 -s 2048 <ll_addr>`
+3. Record the packet loss and timings, it should be less then 10%
+4. check the packet buffer with `pktbuf`

07-multi-hop/07-multi-hop.md

@@ -45,3 +45,17 @@ Sending UDP between two iotlab-m3 nodes over three hops with RPL generated route
 
 <10% packets lost on the pinging node.
 No leaks in the packet buffer (check with `gnrc_pktbuf_cmd`).
+
+Task #05 (Experimental) - UDP with large payload on iotlab-m3 with three hops (RPL route)
+=========================================================================================
+### Description
+
+Sending UDP with payload size 2kB between two iotlab-m3 nodes over three hops
+with RPL generated routes (make sure module `gnrc_ipv6_ext_frag` is included and
+the packet buffer is large enough to handle both the fragmented and reassembled
+requests/replies).
+
+### Result
+
+<10% packets lost on the pinging node.
+No leaks in the packet buffer (check with `gnrc_pktbuf_cmd`).

07-multi-hop/example_test_guide.md

@@ -109,3 +109,20 @@ Sending UDP between two iotlab-m3 nodes over three hops with RPL generated route
 
 <10% packets lost on the pinging node.
 No leaks in the packet buffer (check with `gnrc_pktbuf_cmd`).
+
+Task #05 (Experimental) - UDP with large payload on iotlab-m3 with three hops (RPL route)
+=========================================================================================
+### Description
+
+Sending UDP between two iotlab-m3 nodes over three hops with RPL generated routes.
+
+1. Follow Task 3 and 4 setup
+2. Start a udp server on root node, Node 1:`udp server start 1234`
+3. Start a udp server on the other node, Node 4:`udp server start 4321`
+4. Send 60 packets to the other node from the root node, Node 1:`udp send abcd::<other node global address> 4321 2048 60 1000000`
+5. Send 60 packets to the other node from the root node, Node 4:`udp send abcd::1 1234 2048 60 1000000`
+
+### Result
+
+<10% packets lost on the pinging node.
+No leaks in the packet buffer (check with `gnrc_pktbuf_cmd`).