Wait for serial port close when disconnecting

pyproject.toml

@@ -15,13 +15,14 @@ license = {text = "GPL-3.0"}
 requires-python = ">=3.8"
 dependencies = [
     "click>=8.0.0",
-    "zigpy",
+    "zigpy>=0.70.0",
     "crc",
-    "bellows~=0.41.0",
+    "bellows>=0.42.0",
     'gpiod; platform_system=="Linux"',
     "coloredlogs",
     "async_timeout",
     "typing_extensions",
+    "pyserial-asyncio-fast",
 ]
 
 [tool.setuptools.packages.find]

universal_silabs_flasher/common.py

@@ -12,7 +12,6 @@
 import async_timeout
 import click
 import crc
-import serial_asyncio
 import zigpy.serial
 
 if typing.TYPE_CHECKING:
@@ -118,61 +117,6 @@ async def wait_for_state(self, state: str) -> None:
             self._futures_for_state[state].remove(future)
 
 
-class SerialProtocol(asyncio.Protocol):
-    """Base class for packet-parsing serial protocol implementations."""
-
-    def __init__(self) -> None:
-        self._buffer = bytearray()
-        self._transport: serial_asyncio.SerialTransport | None = None
-        self._connected_event = asyncio.Event()
-
-    async def wait_until_connected(self) -> None:
-        """Wait for the protocol's transport to be connected."""
-        await self._connected_event.wait()
-
-    def connection_made(self, transport: serial_asyncio.SerialTransport) -> None:
-        _LOGGER.debug("Connection made: %s", transport)
-
-        self._transport = transport
-        self._connected_event.set()
-
-    def send_data(self, data: bytes) -> None:
-        """Sends data over the connected transport."""
-        assert self._transport is not None
-        data = bytes(data)
-        _LOGGER.debug("Sending data %s", data)
-        self._transport.write(data)
-
-    def data_received(self, data: bytes) -> None:
-        _LOGGER.debug("Received data %s", data)
-        self._buffer += data
-
-    def disconnect(self) -> None:
-        if self._transport is not None:
-            self._transport.close()
-            self._buffer.clear()
-            self._connected_event.clear()
-
-
-def patch_pyserial_asyncio() -> None:
-    """Patches pyserial-asyncio's `SerialTransport` to support swapping protocols."""
-
-    if (
-        serial_asyncio.SerialTransport.get_protocol
-        is not asyncio.BaseTransport.get_protocol
-    ):
-        return
-
-    def get_protocol(self) -> asyncio.Protocol:
-        return self._protocol
-
-    def set_protocol(self, protocol: asyncio.Protocol) -> None:
-        self._protocol = protocol
-
-    serial_asyncio.SerialTransport.get_protocol = get_protocol
-    serial_asyncio.SerialTransport.set_protocol = set_protocol
-
-
 @contextlib.asynccontextmanager
 async def connect_protocol(port, baudrate, factory):
     loop = asyncio.get_running_loop()
@@ -189,10 +133,7 @@ async def connect_protocol(port, baudrate, factory):
     try:
         yield protocol
     finally:
-        protocol.disconnect()
-
-        # Required for Windows to be able to re-connect to the same serial port
-        await asyncio.sleep(0)
+        await protocol.disconnect()
 
 
 class CommaSeparatedNumbers(click.ParamType):

universal_silabs_flasher/cpc.py

@@ -6,10 +6,11 @@
 import typing
 
 import async_timeout
+from zigpy.serial import SerialProtocol
 import zigpy.types
 
 from . import cpc_types
-from .common import BufferTooShort, SerialProtocol, Version, crc16_ccitt
+from .common import BufferTooShort, Version, crc16_ccitt
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -209,6 +210,8 @@ def poll_final(self) -> bool:
 class CPCProtocol(SerialProtocol):
     """Partial implementation of the CPC protocol."""
 
+    _buffer: bytearray
+
     def __init__(self) -> None:
         super().__init__()
         self._command_seq: int = 0
@@ -279,6 +282,11 @@ async def get_secondary_version(self) -> Version | None:
 
         return Version(version_bytes.split(b"\x00", 1)[0].decode("ascii"))
 
+    def send_data(self, data: bytes) -> None:
+        assert self._transport is not None
+        _LOGGER.debug("Sending data %s", data)
+        self._transport.write(data)
+
     def data_received(self, data: bytes) -> None:
         super().data_received(data)
 

universal_silabs_flasher/emberznet.py

@@ -1,47 +1,32 @@
-import asyncio
 import contextlib
 
 import bellows.config
 import bellows.ezsp
 import bellows.types
+from bellows.zigbee.application import ControllerApplication
 import zigpy.config
 
-AFTER_DISCONNECT_DELAY = 0.1
-
 
 @contextlib.asynccontextmanager
 async def connect_ezsp(port: str, baudrate: int = 115200) -> bellows.ezsp.EZSP:
     """Context manager to return a connected EZSP instance for a serial port."""
-    app_config = zigpy.config.CONFIG_SCHEMA(
-        {
-            zigpy.config.CONF_DEVICE: {
-                zigpy.config.CONF_DEVICE_PATH: port,
-                zigpy.config.CONF_DEVICE_BAUDRATE: baudrate,
-            },
-            bellows.config.CONF_EZSP_CONFIG: {
-                # Do not set any configuration on startup
-                "CONFIG_END_DEVICE_POLL_TIMEOUT": None,
-                "CONFIG_INDIRECT_TRANSMISSION_TIMEOUT": None,
-                "CONFIG_TC_REJOINS_USING_WELL_KNOWN_KEY_TIMEOUT_S": None,
-                "CONFIG_SECURITY_LEVEL": None,
-                "CONFIG_APPLICATION_ZDO_FLAGS": None,
-                "CONFIG_SUPPORTED_NETWORKS": None,
-                "CONFIG_PAN_ID_CONFLICT_REPORT_THRESHOLD": None,
-                "CONFIG_TRUST_CENTER_ADDRESS_CACHE_SIZE": None,
-                "CONFIG_SOURCE_ROUTE_TABLE_SIZE": None,
-                "CONFIG_MULTICAST_TABLE_SIZE": None,
-                "CONFIG_ADDRESS_TABLE_SIZE": None,
-                "CONFIG_PACKET_BUFFER_COUNT": None,
-                "CONFIG_STACK_PROFILE": None,
-            },
-            bellows.config.CONF_USE_THREAD: False,
-        }
+
+    ezsp = bellows.ezsp.EZSP(
+        # We use this roundabout way to construct the device schema to make sure that
+        # we are compatible with future changes to the zigpy device config schema.
+        ControllerApplication.SCHEMA(
+            {
+                zigpy.config.CONF_DEVICE: {
+                    zigpy.config.CONF_DEVICE_PATH: port,
+                    zigpy.config.CONF_DEVICE_BAUDRATE: baudrate,
+                }
+            }
+        )[zigpy.config.CONF_DEVICE]
     )
 
-    ezsp = await bellows.ezsp.EZSP.initialize(app_config)
+    await ezsp.connect(use_thread=False)
 
     try:
         yield ezsp
     finally:
-        ezsp.close()
-        await asyncio.sleep(AFTER_DISCONNECT_DELAY)
+        await ezsp.disconnect()

universal_silabs_flasher/flash.py

@@ -17,7 +17,7 @@
 import zigpy.ota.validators
 import zigpy.types
 
-from .common import CommaSeparatedNumbers, patch_pyserial_asyncio, put_first
+from .common import CommaSeparatedNumbers, put_first
 from .const import (
     DEFAULT_BAUDRATES,
     FW_IMAGE_TYPE_TO_APPLICATION_TYPE,
@@ -28,8 +28,6 @@
 from .flasher import Flasher
 from .xmodemcrc import BLOCK_SIZE as XMODEM_BLOCK_SIZE, ReceiverCancelled
 
-patch_pyserial_asyncio()
-
 _LOGGER = logging.getLogger(__name__)
 LOG_LEVELS = ["INFO", "DEBUG"]
 

universal_silabs_flasher/flasher.py

@@ -9,14 +9,9 @@
 import bellows.config
 import bellows.ezsp
 import bellows.types
+from zigpy.serial import SerialProtocol
 
-from .common import (
-    PROBE_TIMEOUT,
-    SerialProtocol,
-    Version,
-    connect_protocol,
-    pad_to_multiple,
-)
+from .common import PROBE_TIMEOUT, Version, connect_protocol, pad_to_multiple
 from .const import DEFAULT_BAUDRATES, GPIO_CONFIGS, ApplicationType, ResetTarget
 from .cpc import CPCProtocol
 from .emberznet import connect_ezsp
@@ -115,8 +110,6 @@ async def probe_gecko_bootloader(
                 if run_firmware:
                     await gecko.run_firmware()
                     _LOGGER.info("Launched application from bootloader")
-
-            await asyncio.sleep(1)
         except NoFirmwareError:
             _LOGGER.warning("No application can be launched")
             return ProbeResult(

universal_silabs_flasher/gecko_bootloader.py

@@ -7,8 +7,9 @@
 import typing
 
 import async_timeout
+from zigpy.serial import SerialProtocol
 
-from .common import PROBE_TIMEOUT, SerialProtocol, StateMachine, Version
+from .common import PROBE_TIMEOUT, StateMachine, Version
 from .xmodemcrc import send_xmodem128_crc
 
 _LOGGER = logging.getLogger(__name__)
@@ -142,6 +143,11 @@ async def upload_firmware(
         if self._upload_status != "complete":
             raise UploadError(self._upload_status)
 
+    def send_data(self, data: bytes) -> None:
+        assert self._transport is not None
+        _LOGGER.debug("Sending data %s", data)
+        self._transport.write(data)
+
     def data_received(self, data: bytes) -> None:
         super().data_received(data)
 

universal_silabs_flasher/spinel.py

@@ -6,9 +6,10 @@
 import typing
 
 import async_timeout
+from zigpy.serial import SerialProtocol
 import zigpy.types
 
-from .common import SerialProtocol, Version, crc16_kermit
+from .common import Version, crc16_kermit
 from .spinel_types import CommandID, HDLCSpecial, PropertyID, ResetReason
 
 _LOGGER = logging.getLogger(__name__)
@@ -104,11 +105,18 @@ def serialize(self) -> bytes:
 
 
 class SpinelProtocol(SerialProtocol):
+    _buffer: bytearray
+
     def __init__(self) -> None:
         super().__init__()
         self._transaction_id: int = 1
         self._pending_frames: dict[int, asyncio.Future] = {}
 
+    def send_data(self, data: bytes) -> None:
+        assert self._transport is not None
+        _LOGGER.debug("Sending data %s", data)
+        self._transport.write(data)
+
     def data_received(self, data: bytes) -> None:
         super().data_received(data)
 
@@ -260,6 +268,3 @@ async def enter_bootloader(self) -> None:
             ResetReason.BOOTLOADER.serialize(),
             wait_response=False,
         )
-
-        # A small delay is necessary when switching baudrates
-        await asyncio.sleep(0.5)