Fixed typo in time.c #536

drewgrubb0 · 2018-03-20T16:55:23Z

Randomly stumbled upon this:
LINE 184: "Verify we're witin" -> "Verify we're within"

//EDIT: Not the appropriate location for something like this

Randomly stumbled upon this: LINE 184: "Verify we're witin" -> "Verify we're within"

This patch prevents the arcnet driver from the following deadlock. [ 41.273910] ====================================================== [ 41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted [ 41.292366] ------------------------------------------------------ [ 41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire: [ 41.305628] (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.315199] [ 41.315199] and this task is already holding: [ 41.321324] (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.329593] which would create a new lock dependency: [ 41.334893] (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...} [ 41.341801] [ 41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 41.350108] (_xmit_ARCNET#2){+.-...} ... which became SOFTIRQ-irq-safe at: [ 41.357539] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.362677] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.367723] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.372759] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.378340] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.383469] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.388138] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.393728] [<c0014578>] __irq_svc+0x58/0x78 [ 41.398402] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.403443] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.409029] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.414170] [ 41.414170] to a SOFTIRQ-irq-unsafe lock: [ 41.419931] (&(&lp->lock)->rlock){+.+...} ... which became SOFTIRQ-irq-unsafe at: [ 41.427996] ... [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.433409] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.439646] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.445063] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.450661] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.455700] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.460649] [<c0050f10>] kthread+0xe4/0xf8 [ 41.465158] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.470207] [ 41.470207] other info that might help us debug this: [ 41.470207] [ 41.478627] Possible interrupt unsafe locking scenario: [ 41.478627] [ 41.485763] CPU0 CPU1 [ 41.490521] ---- ---- [ 41.495279] lock(&(&lp->lock)->rlock); [ 41.499414] local_irq_disable(); [ 41.505636] lock(_xmit_ARCNET#2); [ 41.511967] lock(&(&lp->lock)->rlock); [ 41.518741] <Interrupt> [ 41.521490] lock(_xmit_ARCNET#2); [ 41.525356] [ 41.525356] *** DEADLOCK *** [ 41.525356] [ 41.531587] 1 lock held by arcecho/233: [ 41.535617] #0: (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8 [ 41.544355] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 { [ 41.557357] HARDIRQ-ON-W at: [ 41.560664] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.567445] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.574866] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.581646] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.588613] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.596120] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.602991] [<c004af30>] process_one_work+0x188/0x40c [ 41.610131] [<c004b200>] worker_thread+0x4c/0x480 [ 41.616912] [<c0050f10>] kthread+0xe4/0xf8 [ 41.623048] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.629735] IN-SOFTIRQ-W at: [ 41.633039] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.639820] [<c063ab8c>] dev_watchdog+0x5c/0x264 [ 41.646508] [<c0094edc>] call_timer_fn+0x6c/0xf4 [ 41.653190] [<c00950b8>] run_timer_softirq+0x154/0x210 [ 41.660425] [<c0036b30>] __do_softirq+0x144/0x298 [ 41.667201] [<c0036fb4>] irq_exit+0xcc/0x130 [ 41.673518] [<c0085c50>] __handle_domain_irq+0x60/0xb4 [ 41.680754] [<c0014578>] __irq_svc+0x58/0x78 [ 41.687077] [<c0010274>] arch_cpu_idle+0x24/0x3c [ 41.693769] [<c007127c>] cpu_startup_entry+0x1f8/0x25c [ 41.701006] [<c09adc90>] start_kernel+0x3c0/0x3cc [ 41.707791] INITIAL USE at: [ 41.711003] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.717696] [<c063ba28>] dev_deactivate_many+0x114/0x304 [ 41.725026] [<c063bc3c>] dev_deactivate+0x24/0x38 [ 41.731718] [<c0630374>] linkwatch_do_dev+0x40/0x74 [ 41.738593] [<c06305d8>] __linkwatch_run_queue+0xec/0x140 [ 41.746011] [<c0630658>] linkwatch_event+0x2c/0x34 [ 41.752789] [<c004af30>] process_one_work+0x188/0x40c [ 41.759847] [<c004b200>] worker_thread+0x4c/0x480 [ 41.766541] [<c0050f10>] kthread+0xe4/0xf8 [ 41.772596] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.779198] } [ 41.780945] ... key at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8 [ 41.788192] ... acquired at: [ 41.791309] [<c007bed8>] lock_acquire+0x70/0x90 [ 41.796361] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 41.802324] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 41.808844] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 41.814622] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 41.820034] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 41.825091] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 41.829956] [<c05ffda8>] SyS_send+0x18/0x20 [ 41.834638] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 41.839954] [ 41.841514] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: [ 41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 { [ 41.855644] HARDIRQ-ON-W at: [ 41.858945] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.865726] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.873607] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.880666] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.887901] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.894593] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.901195] [<c0050f10>] kthread+0xe4/0xf8 [ 41.907338] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.914025] SOFTIRQ-ON-W at: [ 41.917328] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.924106] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.931981] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.939028] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 41.946264] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 41.952954] [<c0087548>] irq_thread+0x13c/0x1dc [ 41.959548] [<c0050f10>] kthread+0xe4/0xf8 [ 41.965689] [<c000f810>] ret_from_fork+0x14/0x24 [ 41.972379] INITIAL USE at: [ 41.975595] [<c06f8fc8>] _raw_spin_lock+0x30/0x40 [ 41.982283] [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet] [ 41.990063] [<c0089120>] handle_nested_irq+0x8c/0xec [ 41.997027] [<c03c1170>] regmap_irq_thread+0x190/0x314 [ 42.004172] [<c0087244>] irq_thread_fn+0x1c/0x34 [ 42.010766] [<c0087548>] irq_thread+0x13c/0x1dc [ 42.017267] [<c0050f10>] kthread+0xe4/0xf8 [ 42.023314] [<c000f810>] ret_from_fork+0x14/0x24 [ 42.029903] } [ 42.031648] ... key at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet] [ 42.039255] ... acquired at: [ 42.042372] [<c007bed8>] lock_acquire+0x70/0x90 [ 42.047413] [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54 [ 42.053364] [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet] [ 42.059872] [<c06b9380>] packet_direct_xmit+0x130/0x1c8 [ 42.065634] [<c06bc7e4>] packet_sendmsg+0x3b8/0x680 [ 42.071030] [<c05fe8b0>] sock_sendmsg+0x14/0x24 [ 42.076069] [<c05ffd68>] SyS_sendto+0xb8/0xe0 [ 42.080926] [<c05ffda8>] SyS_send+0x18/0x20 [ 42.085601] [<c000f780>] ret_fast_syscall+0x0/0x1c [ 42.090918] [ 42.092481] [ 42.092481] stack backtrace: [ 42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536 [ 42.104751] Hardware name: Generic AM33XX (Flattened Device Tree) [ 42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14) [ 42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c) [ 42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c) [ 42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0) [ 42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0) [ 42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90) [ 42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54) [ 42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet]) [ 42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8) [ 42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680) [ 42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24) [ 42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0) [ 42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20) [ 42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: removed unneeded zero assignment of flags Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action sample rate 1024 group 4 pass index 90 # tc actions replace action sample \ > rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action sample had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: sample rate 1/1024 group 4 goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0 RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400 R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00 R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600 FS: 0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_sample_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action simple sdata hello pass index 90 # tc actions replace action simple \ > sdata world goto chain 42 index 90 cookie c1a0c1a0 # tc action show action simple had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: Simple <world> index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140 RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100 R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0 FS: 0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_simple_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action skbedit ptype host pass index 90 # tc actions replace action skbedit \ > ptype host goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action skbedit had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: skbedit ptype host goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00 RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00 R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0 FS: 0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_skbedit_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90 # tc actions replace action skbmod \ > set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action skbmod had the following output: src MAC address <00:c1:a0:c1:a0:00> src MAC address <00:c1:a0:c1:a0:00> Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640 RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0 RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00 R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00 FS: 0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003 RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_skbmod_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \ > nocsum id 1 pass index 90 # tc actions replace action tunnel_key \ > set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \ > goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action tunnel_key had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2.0 key_id 1 dst_port 3128 nocsum goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246 RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000 R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40 FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00 R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_tunnel_key_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action vlan pop pass index 90 # tc actions replace action vlan \ > pop goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action vlan had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: vlan pop goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0 FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_vlan_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action sample rate 1024 group 4 pass index 90 # tc actions replace action sample \ > rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action sample had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: sample rate 1/1024 group 4 goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0 RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400 R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00 R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600 FS: 0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_sample_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action simple sdata hello pass index 90 # tc actions replace action simple \ > sdata world goto chain 42 index 90 cookie c1a0c1a0 # tc action show action simple had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: Simple <world> index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140 RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100 R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0 FS: 0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_simple_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action skbedit ptype host pass index 90 # tc actions replace action skbedit \ > ptype host goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action skbedit had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: skbedit ptype host goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00 RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00 R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0 FS: 0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_skbedit_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90 # tc actions replace action skbmod \ > set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action skbmod had the following output: src MAC address <00:c1:a0:c1:a0:00> src MAC address <00:c1:a0:c1:a0:00> Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640 RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0 RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00 R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00 FS: 0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003 RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_skbmod_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \ > nocsum id 1 pass index 90 # tc actions replace action tunnel_key \ > set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \ > goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action tunnel_key had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2.0 key_id 1 dst_port 3128 nocsum goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246 RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000 R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40 FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00 R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_tunnel_key_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action vlan pop pass index 90 # tc actions replace action vlan \ > pop goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action vlan had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: vlan pop goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ torvalds#536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0 FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_vlan_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514 ("net: sched: add termination action to allow goto chain") Fixes: 97763dc ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

GIT 8c7ae38d1ce12a0eaeba655df8562552b3596c7f commit 8c7ae38d1ce12a0eaeba655df8562552b3596c7f Author: David Howells <dhowells@redhat.com> Date: Wed Mar 27 22:48:02 2019 +0000 afs: Fix StoreData op marshalling The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls generated by ->setattr() ops for the purpose of expanding a file is incorrect due to older documentation incorrectly describing the way the RPC 'FileLength' parameter is meant to work. The older documentation says that this is the length the file is meant to end up at the end of the operation; however, it was never implemented this way in any of the servers, but rather the file is truncated down to this before the write operation is effected, and never expanded to it (and, indeed, it was renamed to 'TruncPos' in 2014). Fix this by setting the position parameter to the new file length and doing a zero-lengh write there. The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file it then mmaps. This can be tested by giving the following test program a filename in an AFS directory: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { char *p; int fd; if (argc != 2) { fprintf(stderr, "Format: test-trunc-mmap <file>\n"); exit(2); } fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC); if (fd < 0) { perror(argv[1]); exit(1); } if (ftruncate(fd, 0x140008) == -1) { perror("ftruncate"); exit(1); } p = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } p[0] = 'a'; if (munmap(p, 4096) < 0) { perror("munmap"); exit(1); } if (close(fd) < 0) { perror("close"); exit(1); } exit(0); } Fixes: 31143d5d515e ("AFS: implement basic file write support") Reported-by: Jonathan Billings <jsbillin@umich.edu> Tested-by: Jonathan Billings <jsbillin@umich.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> commit 7d6ab823d6461e60d211d4c8d89a13dce08b730d Author: David Howells <dhowells@redhat.com> Date: Wed Mar 27 22:53:31 2019 +0000 vfs: Update mount API docs Update the mount API docs to reflect recent changes to the code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> commit b6ffdf27f3d4f1e9af56effe6f86989170d71e95 Author: Thomas Richter <tmricht@linux.ibm.com> Date: Mon Mar 18 15:50:27 2019 +0100 s390/cpumf: Fix warning from check_processor_id Function __hw_perf_event_init() used a CPU variable without ensuring CPU preemption has been disabled. This caused the following warning in the kernel log: [ 7.277085] BUG: using smp_processor_id() in preemptible [00000000] code: cf-csdiag/1892 [ 7.277111] caller is cf_diag_event_init+0x13a/0x338 [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1 [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR) [ 7.277139] Call Trace: [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0) [ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0 [ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100 [ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338 [ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0 [ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0 [ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50 [ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8 [ 7.277233] 2 locks held by cf-csdiag/1892: [ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.}, at: __s390x_sys_perf_event_open+0xd2e/0xd50 [ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....}, at: perf_event_alloc+0x52e/0xce0 The variable is now accessed in proper context. Use get_cpu_var()/put_cpu_var() pair to disable preemption during access. As the hardware authorization settings apply to all CPUs, it does not matter which CPU is used to check the authorization setting. Remove the event->count assignment. It is not needed as function perf_event_alloc() allocates memory for the event with kzalloc() and thus count is already set to zero. Fixes: fe5908bccc56 ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> commit 01f2f5b82a2b523ae76af53f2ff43c48dde10a00 Author: Alakesh Haloi <alakesh.haloi@gmail.com> Date: Tue Mar 26 02:00:01 2019 +0000 SUNRPC: fix uninitialized variable warning Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> commit 8c838f53e149871561a9261ac768a9c7071b43d0 Author: Ioana Ciornei <ioana.ciornei@nxp.com> Date: Mon Mar 25 13:06:22 2019 +0000 dpaa2-eth: fix race condition with bql frame accounting It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a5a0d ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 047a013f8d0af8299ce2d02af152de6a30165ccc Author: Arnd Bergmann <arnd@arndb.de> Date: Mon Mar 25 13:49:16 2019 +0100 chelsio: use BUG() instead of BUG_ON(1) clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit c493b09b2792336f471d2206be180a4b4c1fc9ba Author: Jiri Pirko <jiri@mellanox.com> Date: Sun Mar 24 00:21:03 2019 +0100 net: devlink: skip info_get op call if it is not defined in dumpit In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf22882c60 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 450895d04ba13a96886eddfeddb11556ae8624f1 Author: Vladimir Oltean <olteanv@gmail.com> Date: Sun Mar 24 00:18:46 2019 +0200 net: phy: bcm54xx: Encode link speed and activity into LEDs Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 9926cb5f8b0f0aea535735185600d74db7608550 Author: Xin Long <lucien.xin@gmail.com> Date: Sun Mar 24 00:48:22 2019 +0800 tipc: change to check tipc_own_id to return in tipc_net_stop When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c85a4 ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c85a4 ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit b7ebee2f95fb0fa2862d5ed2de707f872c311393 Author: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Date: Sat Mar 23 13:59:53 2019 +0000 net: usb: aqc111: Extend HWID table by QNAP device New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 1f8389bf63aec99218c62490869ca38d1a38ce46 Author: Leslie Monis <lesliemonis@gmail.com> Date: Sat Mar 23 19:11:33 2019 +0530 net: sched: Kconfig: update reference link for PIE RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit db460c54b67fc2cbe6dcef88b7bf3cba8e07f80e Author: Christian Lamparter <chunkeey@gmail.com> Date: Fri Mar 22 01:05:03 2019 +0100 net: dsa: qca8k: extend slave-bus implementations This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 1eec7151ae0e134bd42e3f128066b2ff8da21393 Author: Christian Lamparter <chunkeey@gmail.com> Date: Fri Mar 22 01:05:02 2019 +0100 net: dsa: qca8k: remove leftover phy accessors This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 5e07321f3388e6f2b13c43ae9df3e09efa8418e0 Author: Christian Lamparter <chunkeey@gmail.com> Date: Fri Mar 22 01:05:01 2019 +0100 dt-bindings: net: dsa: qca8k: support internal mdio-bus This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit fb1eb41a3dd4cfff274c98f3c3324ab329641298 Author: Christian Lamparter <chunkeey@gmail.com> Date: Fri Mar 22 01:05:00 2019 +0100 dt-bindings: net: dsa: qca8k: fix example In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 9efb85c5cfac7e1f0caae4471446d936ff2163fe Author: Hariprasad Kelam <hariprasad.kelam@gmail.com> Date: Sun Mar 24 00:05:23 2019 +0530 ftrace: Fix warning using plain integer as NULL & spelling corrections Changed 0 --> NULL to avoid sparse warning Corrected spelling mistakes reported by checkpatch.pl Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace CHECK kernel/trace/ftrace.c kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> commit 3dee10da2e9ff220e054a8f158cc296c797fbe81 Author: Frank Rowand <frank.rowand@sony.com> Date: Thu Mar 21 23:58:20 2019 -0700 tracing: initialize variable in create_dyn_event() Fix compile warning in create_dyn_event(): 'ret' may be used uninitialized in this function [-Wuninitialized]. Link: http://lkml.kernel.org/r/1553237900-8555-1-git-send-email-frowand.list@gmail.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Fixes: 5448d44c3855 ("tracing: Add unified dynamic event framework") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> commit ff9d31d0d46672e201fc9ff59c42f1eef5f00c77 Author: Tom Zanussi <tom.zanussi@linux.intel.com> Date: Wed Mar 20 12:53:33 2019 -0500 tracing: Remove unnecessary var_ref destroy in track_data_destroy() Commit 656fe2ba85e8 (tracing: Use hist trigger's var_ref array to destroy var_refs) centralized the destruction of all the var_refs in one place so that other code didn't have to do it. The track_data_destroy() added later ignored that and also destroyed the track_data var_ref, causing a double-free error flagged by KASAN. ================================================================== BUG: KASAN: use-after-free in destroy_hist_field+0x30/0x70 Read of size 8 at addr ffff888086df2210 by task bash/1694 CPU: 6 PID: 1694 Comm: bash Not tainted 5.1.0-rc1-test+ #15 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x71/0xa0 ? destroy_hist_field+0x30/0x70 print_address_description.cold.3+0x9/0x1fb ? destroy_hist_field+0x30/0x70 ? destroy_hist_field+0x30/0x70 kasan_report.cold.4+0x1a/0x33 ? __kasan_slab_free+0x100/0x150 ? destroy_hist_field+0x30/0x70 destroy_hist_field+0x30/0x70 track_data_destroy+0x55/0xe0 destroy_hist_data+0x1f0/0x350 hist_unreg_all+0x203/0x220 event_trigger_open+0xbb/0x130 do_dentry_open+0x296/0x700 ? stacktrace_count_trigger+0x30/0x30 ? generic_permission+0x56/0x200 ? __x64_sys_fchdir+0xd0/0xd0 ? inode_permission+0x55/0x200 ? security_inode_permission+0x18/0x60 path_openat+0x633/0x22b0 ? path_lookupat.isra.50+0x420/0x420 ? __kasan_kmalloc.constprop.12+0xc1/0xd0 ? kmem_cache_alloc+0xe5/0x260 ? getname_flags+0x6c/0x2a0 ? do_sys_open+0x149/0x2b0 ? do_syscall_64+0x73/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 ? _raw_write_lock_bh+0xe0/0xe0 ? __kernel_text_address+0xe/0x30 ? unwind_get_return_address+0x2f/0x50 ? __list_add_valid+0x2d/0x70 ? deactivate_slab.isra.62+0x1f4/0x5a0 ? getname_flags+0x6c/0x2a0 ? set_track+0x76/0x120 do_filp_open+0x11a/0x1a0 ? may_open_dev+0x50/0x50 ? _raw_spin_lock+0x7a/0xd0 ? _raw_write_lock_bh+0xe0/0xe0 ? __alloc_fd+0x10f/0x200 do_sys_open+0x1db/0x2b0 ? filp_open+0x50/0x50 do_syscall_64+0x73/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa7b24a4ca2 Code: 25 00 00 41 00 3d 00 00 41 00 74 4c 48 8d 05 85 7a 0d 00 8b 00 85 c0 75 6d 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 0f 87 a2 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 RSP: 002b:00007fffbafb3af0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 000055d3648ade30 RCX: 00007fa7b24a4ca2 RDX: 0000000000000241 RSI: 000055d364a55240 RDI: 00000000ffffff9c RBP: 00007fffbafb3bf0 R08: 0000000000000020 R09: 0000000000000002 R10: 00000000000001b6 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 000055d364a55240 ================================================================== So remove the track_data_destroy() destroy_hist_field() call for that var_ref. Link: http://lkml.kernel.org/r/1deffec420f6a16d11dd8647318d34a66d1989a9.camel@linux.intel.com Fixes: 466f4528fbc69 ("tracing: Generalize hist trigger onmax and save action") Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> commit d29f5aa0bc0c321e1b9e4658a2a7e08e885da52a Author: Heiner Kallweit <hkallweit1@gmail.com> Date: Fri Mar 22 20:00:20 2019 +0100 net: phy: don't clear BMCR in genphy_soft_reset So far we effectively clear the BMCR register. Some PHY's can deal with this (e.g. because they reset BMCR to a default as part of a soft-reset) whilst on others this causes issues because e.g. the autoneg bit is cleared. Marvell is an example, see also thread [0]. So let's be a little bit more gentle and leave all bits we're not interested in as-is. This change is needed for PHY drivers to properly deal with the original patch. [0] https://marc.info/?t=155264050700001&r=1&w=2 Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Tested-by: Phil Reid <preid@electromag.com.au> Tested-by: liweihang <liweihang@hisilicon.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit a3ac7917b73070010c05b4485b8582a6c9cd69b6 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Mon Mar 25 14:49:00 2019 -0700 Revert "parport: daisy: use new parport device model" This reverts commit 1aec4211204d9463d1fd209eb50453de16254599. Steven Rostedt reports that it causes a hang at bootup and bisected it to this commit. The troigger is apparently a module alias for "parport_lowlevel" that points to "parport_pc", which causes a hang with modprobe -q -- parport_lowlevel blocking forever with a backtrace like this: wait_for_completion_killable+0x1c/0x28 call_usermodehelper_exec+0xa7/0x108 __request_module+0x351/0x3d8 get_lowlevel_driver+0x28/0x41 [parport] __parport_register_driver+0x39/0x1f4 [parport] daisy_drv_init+0x31/0x4f [parport] parport_bus_init+0x5d/0x7b [parport] parport_default_proc_register+0x26/0x1000 [parport] do_one_initcall+0xc2/0x1e0 do_init_module+0x50/0x1d4 load_module+0x1c2e/0x21b3 sys_init_module+0xef/0x117 Supid says: "Due to the new device model daisy driver will now try to find the parallel ports while trying to register its driver so that it can bind with them. Now, since daisy driver is loaded while parport bus is initialising the list of parport is still empty and it tries to load the lowlevel driver, which has an alias set to parport_pc, now causes a deadlock" But I don't think the daisy driver should be loaded by the parport initialization in the first place, so let's revert the whole change. If the daisy driver can just initialize separately on its own (like a driver should), instead of hooking into the parport init sequence directly, this issue probably would go away. Reported-and-bisected-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reported-by: Michal Kubecek <mkubecek@suse.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> commit 93958742192e7956d05989836ada9071f9ffe42e Author: Jonathan Hunter <jonathanh@nvidia.com> Date: Mon Mar 25 12:28:07 2019 +0100 arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 Enabling CQE support on Tegra186 Jetson TX2 has introduced a regression that is causing accesses to the file-system on the eMMC to fail. Errors such as the following have been observed ... mmc2: running CQE recovery mmc2: mmc_select_hs400 failed, error -110 print_req_error: I/O error, dev mmcblk2, sector 8 flags 80700 mmc2: cqhci: CQE failed to exit halt state For now disable CQE support for Tegra186 until this issue is resolved. Fixes: dfd3cb6feb73 arm64: tegra: Add CQE Support for SDMMC4 Signed-off-by: Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> commit fa9463564e77067df81b0b8dec91adbbbc47bfb4 Author: Linus Walleij <linus.walleij@linaro.org> Date: Mon Mar 18 16:31:22 2019 +0100 ARM: dts: nomadik: Fix polarity of SPI CS The SPI DT bindings are for historical reasons a pitfall, the ability to flag a GPIO line as active high/low with the second cell flags was introduced later so the SPI subsystem will only accept the bool flag spi-cs-high to indicate that the line is active high. It worked by mistake, but the mistake was corrected in another commit. The comment in the DTS file was also misleading: this CS is indeed active high. Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> commit 2dbed152e2d4c3fe2442284918d14797898b1e8a Author: Sekhar Nori <nsekhar@ti.com> Date: Wed Feb 20 16:36:52 2019 +0530 ARM: davinci: fix build failure with allnoconfig allnoconfig build with just ARCH_DAVINCI enabled fails because drivers/clk/davinci/* depends on REGMAP being enabled. Fix it by selecting REGMAP_MMIO when building in DaVinci support. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> commit 945ab8f6de94430c23a82f3cf2e3f6d6f2945ff7 Author: Jeff Layton <jlayton@kernel.org> Date: Mon Mar 25 08:15:14 2019 -0400 locks: wake any locks blocked on request before deadlock check Andreas reported that he was seeing the tdbtorture test fail in some cases with -EDEADLCK when it wasn't before. Some debugging showed that deadlock detection was sometimes discovering the caller's lock request itself in a dependency chain. While we remove the request from the blocked_lock_hash prior to reattempting to acquire it, any locks that are blocked on that request will still be present in the hash and will still have their fl_blocker pointer set to the current request. This causes posix_locks_deadlock to find a deadlock dependency chain when it shouldn't, as a lock request cannot block itself. We are going to end up waking all of those blocked locks anyway when we go to reinsert the request back into the blocked_lock_hash, so just do it prior to checking for deadlocks. This ensures that any lock blocked on the current request will no longer be part of any blocked request chain. URL: https://bugzilla.kernel.org/show_bug.cgi?id=202975 Fixes: 5946c4319ebb ("fs/locks: allow a lock request to block other requests.") Cc: stable@vger.kernel.org Reported-by: Andreas Schneider <asn@redhat.com> Signed-off-by: Neil Brown <neilb@suse.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> commit 63197f78bca2d86093126783b0ee6519bd652435 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Sat Mar 23 01:49:11 2019 +0100 bpf, libbpf: clarify bump in libbpf version info The current documentation suggests that we would need to bump the libbpf version on every change. Lets clarify this a bit more and reflect what we do today in practice, that is, bumping it once per development cycle. Fixes: 76d1b894c515 ("libbpf: Document API and ABI conventions") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> commit 1d382264d911d91a8be5dbed1f0e053eb3245d81 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Sat Mar 23 01:49:10 2019 +0100 bpf, libbpf: fix version info and add it to shared object Even though libbpf's versioning script for the linker (libbpf.map) is pointing to 0.0.2, the BPF_EXTRAVERSION in the Makefile has not been updated along with it and is therefore still on 0.0.1. While fixing up, I also noticed that the generated shared object versioning information is missing, typical convention is to have a linker name (libbpf.so), soname (libbpf.so.0) and real name (libbpf.so.0.0.2) for library management. This is based upon the LIBBPF_VERSION as well. The build will then produce the following bpf libraries: # ll libbpf* libbpf.a libbpf.so -> libbpf.so.0.0.2 libbpf.so.0 -> libbpf.so.0.0.2 libbpf.so.0.0.2 # readelf -d libbpf.so.0.0.2 | grep SONAME 0x000000000000000e (SONAME) Library soname: [libbpf.so.0] And install them accordingly: # rm -rf /tmp/bld; mkdir /tmp/bld; make -j$(nproc) O=/tmp/bld install Auto-detecting system features: ... libelf: [ on ] ... bpf: [ on ] CC /tmp/bld/libbpf.o CC /tmp/bld/bpf.o CC /tmp/bld/nlattr.o CC /tmp/bld/btf.o CC /tmp/bld/libbpf_errno.o CC /tmp/bld/str_error.o CC /tmp/bld/netlink.o CC /tmp/bld/bpf_prog_linfo.o CC /tmp/bld/libbpf_probes.o CC /tmp/bld/xsk.o LD /tmp/bld/libbpf-in.o LINK /tmp/bld/libbpf.a LINK /tmp/bld/libbpf.so.0.0.2 LINK /tmp/bld/test_libbpf INSTALL /tmp/bld/libbpf.a INSTALL /tmp/bld/libbpf.so.0.0.2 # ll /usr/local/lib64/libbpf.* /usr/local/lib64/libbpf.a /usr/local/lib64/libbpf.so -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0 -> libbpf.so.0.0.2 /usr/local/lib64/libbpf.so.0.0.2 Fixes: 1bf4b05810fe ("tools: bpftool: add probes for eBPF program types") Fixes: 1b76c13e4b36 ("bpf tools: Introduce 'bpf' library and add bpf feature check") Reported-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> commit 526949e877f44672d408bfe291e39860c13f2e24 Author: Arnd Bergmann <arnd@arndb.de> Date: Fri Mar 22 15:18:43 2019 +0100 rxrpc: avoid clang -Wuninitialized warning clang produces a false-positive warning as it fails to notice that "lost = true" implies that "ret" is initialized: net/rxrpc/output.c:402:6: error: variable 'ret' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (lost) ^~~~ net/rxrpc/output.c:437:6: note: uninitialized use occurs here if (ret >= 0) { ^~~ net/rxrpc/output.c:402:2: note: remove the 'if' if its condition is always false if (lost) ^~~~~~~~~ net/rxrpc/output.c:339:9: note: initialize the variable 'ret' to silence this warning int ret, opt; ^ = 0 Rearrange the code to make that more obvious and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 737889efe9713a0f20a75fd0de952841d9275e6b Author: Jon Maloy <jon.maloy@ericsson.com> Date: Fri Mar 22 15:03:51 2019 +0100 tipc: tipc clang warning When checking the code with clang -Wsometimes-uninitialized we get the following warning: if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:847:46: note: uninitialized use occurs here tipc_bearer_xmit(n->net, bearer_id, &xmitq, maddr); net/tipc/node.c:831:2: note: remove the 'if' if its condition is always true if (!tipc_link_is_establishing(l)) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ net/tipc/node.c:821:31: note: initialize the variable 'maddr' to silence this warning struct tipc_media_addr *maddr; We fix this by initializing 'maddr' to NULL. For the matter of clarity, we also test if 'xmitq' is non-empty before we use it and 'maddr' further down in the function. It will never happen that 'xmitq' is non- empty at the same time as 'maddr' is NULL, so this is a sufficient test. Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 064c5d6881e897077639e04973de26440ee205e6 Author: John Hurley <john.hurley@netronome.com> Date: Fri Mar 22 12:37:35 2019 +0000 net: sched: fix cleanup NULL pointer exception in act_mirr A new mirred action is created by the tcf_mirred_init function. This contains a list head struct which is inserted into a global list on successful creation of a new action. However, after a creation, it is still possible to error out and call the tcf_idr_release function. This, in turn, calls the act_mirr cleanup function via __tcf_idr_release and __tcf_action_put. This cleanup function tries to delete the list entry which is as yet uninitialised, leading to a NULL pointer exception. Fix this by initialising the list entry on creation of a new action. Bug report: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000840c73067 P4D 8000000840c73067 PUD 858dcc067 PMD 0 Oops: 0002 [#1] SMP PTI CPU: 32 PID: 5636 Comm: handler194 Tainted: G OE 5.0.0+ #186 Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.3.6 06/03/2015 RIP: 0010:tcf_mirred_release+0x42/0xa7 [act_mirred] Code: f0 90 39 c0 e8 52 04 57 c8 48 c7 c7 b8 80 39 c0 e8 94 fa d4 c7 48 8b 93 d0 00 00 00 48 8b 83 d8 00 00 00 48 c7 c7 f0 90 39 c0 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 d0 00 RSP: 0018:ffffac4aa059f688 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9dcd1b214d00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9dcd1fa165f8 RDI: ffffffffc03990f0 RBP: ffff9dccf9c7af80 R08: 0000000000000a3b R09: 0000000000000000 R10: ffff9dccfa11f420 R11: 0000000000000000 R12: 0000000000000001 R13: ffff9dcd16b433c0 R14: ffff9dcd1b214d80 R15: 0000000000000000 FS: 00007f441bfff700(0000) GS:ffff9dcd1fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000839e64004 CR4: 00000000001606e0 Call Trace: tcf_action_cleanup+0x59/0xca __tcf_action_put+0x54/0x6b __tcf_idr_release.cold.33+0x9/0x12 tcf_mirred_init.cold.20+0x22e/0x3b0 [act_mirred] tcf_action_init_1+0x3d0/0x4c0 tcf_action_init+0x9c/0x130 tcf_exts_validate+0xab/0xc0 fl_change+0x1ca/0x982 [cls_flower] tc_new_tfilter+0x647/0x8d0 ? load_balance+0x14b/0x9e0 rtnetlink_rcv_msg+0xe3/0x370 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1d4/0x2b0 ? rtnl_calcit.isra.31+0xf0/0xf0 netlink_rcv_skb+0x49/0x110 netlink_unicast+0x16f/0x210 netlink_sendmsg+0x1df/0x390 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x27b/0x2c0 ? futex_wake+0x80/0x140 ? do_futex+0x2b9/0xac0 ? ep_scan_ready_list.constprop.22+0x1f2/0x210 ? ep_poll+0x7a/0x430 __sys_sendmsg+0x47/0x80 do_syscall_64+0x55/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4e232818bd32 ("net: sched: act_mirred: remove dependency on rtnl lock") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 23c78343ec36990709b636a9e02bad814f4384ad Author: Heiner Kallweit <hkallweit1@gmail.com> Date: Fri Mar 22 07:39:35 2019 +0100 r8169: fix cable re-plugging issue Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 75eac7b5f68b0a0671e795ac636457ee27cc11d8 Author: Wen Yang <wen.yang99@zte.com.cn> Date: Fri Mar 22 11:04:09 2019 +0800 net: ethernet: ti: fix possible object reference leak The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 Author: Wen Yang <wen.yang99@zte.com.cn> Date: Fri Mar 22 11:04:08 2019 +0800 net: ibm: fix possible object reference leak The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Douglas Miller <dougmill@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> commit fa3a419d2f674b431d38748cb58fb7da17ee8949 Author: Wen Yang <wen.yang99@zte.com.cn> Date: Fri Mar 22 11:04:07 2019 +0800 net: xilinx: fix possible object reference leak The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> commit a7fb107b7d8982ac76c958a0d2838a151b03e97e Author: Florian Fainelli <f.fainelli@gmail.com> Date: Thu Mar 21 16:34:44 2019 -0700 net: phy: Re-parent menus for MDIO bus drivers correctly After 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") the various MDIO bus drivers were no longer parented with config PHYLIB but with config MDIO_BUS which is not a menuconfig, fix this by depending on MDIO_DEVICE which is a menuconfig. This is visually nicer and less confusing for users. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 166bd5b889ac61369c34650887a5c6b899f5e976 Author: Trond Myklebust <trond.myklebust@hammerspace.com> Date: Fri Mar 22 23:03:56 2019 -0400 pNFS/flexfiles: Fix layoutstats handling during read failovers During a read failover, we may end up changing the value of the pgio_mirror_idx, so make sure that we record the layout stats before that update. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> commit 5a698243930c441afccec04e4d5dc8febfd2b775 Author: Trond Myklebust <trond.myklebust@hammerspace.com> Date: Thu Mar 21 17:57:56 2019 -0400 NFS: Fix a typo in nfs_init_timeout_values() Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda19a6 ("NFS: Allow the mount option retrans=0") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> commit d84dd3fb82fa7a094de7f08f10610d55a70cf0ca Author: Trond Myklebust <trond.myklebust@hammerspace.com> Date: Tue Mar 19 11:24:54 2019 -0400 SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected If the transport is still connected, then we do want to allow RPC_SOFTCONN tasks to retry. They should time out if and only if the connection is broken. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> commit c8248c6c1a3d5db944753dd8e1c143d92c2c74fc Author: Heiner Kallweit <hkallweit1@gmail.com> Date: Thu Mar 21 21:23:14 2019 +0100 r8169: don't read interrupt mask register in interrupt handler After the original patch network starts to crash on heavy load. It's not fully clear why this additional register read has such side effects, but removing it fixes the issue. Thanks also to Alex for his contribution and hints. [0] https://marc.info/?t=155268170400002&r=1&w=2 Fixes: e782410ed237 ("r8169: improve spurious interrupt detection") Reported-by: VDR User <user.vdr@gmail.com> Tested-by: VDR User <user.vdr@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 83d163124cf1104cca5b668d5fe6325715a60855 Author: Jakub Kicinski <jakub.kicinski@netronome.com> Date: Thu Mar 21 14:34:36 2019 -0700 bpf: verifier: propagate liveness on all frames Commit 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences") connected up parentage chains of all frames of the stack. It didn't, however, ensure propagate_liveness() propagates all liveness information along those chains. This means pruning happening in the callee may generate explored states with incomplete liveness for the chains in lower frames of the stack. The included selftest is similar to the prior one from commit 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences"), where callee would prune regardless of the difference in r8 state. Now we also initialize r9 to 0 or 1 based on a result from get_random(). r9 is never read so the walk with r9 = 0 gets pruned (correctly) after the walk with r9 = 1 completes. The selftest is so arranged that the pruning will happen in the callee. Since callee does not propagate read marks of r8, the explored state at the pruning point prior to the callee will now ignore r8. Propagate liveness on all frames of the stack when pruning. Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> commit 507aaeeef80d70c46bdf07cda49234b36c2bbdcb Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Date: Thu Jan 10 21:19:34 2019 +0100 ARM: imx_v4_v5_defconfig: enable PWM driver While there is no mainline board that makes use of the PWM still enable the driver for it to increase compile test coverage. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> commit 728e096dd70889c2e80dd4153feee91afb1daf72 Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Date: Thu Jan 10 21:19:33 2019 +0100 ARM: imx_v6_v7_defconfig: continue compiling the pwm driver After the pwm-imx driver was split into two drivers and the Kconfig symbol changed accordingly, use the new name to continue being able to use the PWM hardware. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> commit 15b43e497ffd80ca44c00d781869a0e71f223ea5 Author: Michal Vokáč <michal.vokac@ysoft.com> Date: Wed Mar 20 12:09:05 2019 +0100 ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch The switch is accessible through pseudo PHY which is located at 0x10. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards") Signed-off-by: Shawn Guo <shawnguo@kernel.org> commit 41b37f4c0fa67185691bcbd30201cad566f2f0d1 Author: Masanari Iida <standby24x7@gmail.com> Date: Tue Mar 19 01:30:09 2019 +0900 ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi This patch fixes a spelling typo. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Fixes: cc42603de320 ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support") Signed-off-by: Shawn Guo <shawnguo@kernel.org> commit 5f543a54eec08228ab0cc0a49cf5d79dd32c9e5e Author: Yunsheng Lin <linyunsheng@huawei.com> Date: Thu Mar 21 11:28:43 2019 +0800 net: hns3: fix for not calculating tx bd num correctly When there is only one byte in a frag, the current calculation using "(size + HNS3_MAX_BD_SIZE - 1) >> HNS3_MAX_BD_SIZE_OFFSET" will return zero, because HNS3_MAX_BD_SIZE is 65535 and HNS3_MAX_BD_SIZE_OFFSET is 16. So it will cause tx error when a frag's size is one byte. This patch fixes it by using DIV_ROUND_UP. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 408f13ef358aa5ad56dc6230c2c7deb92cf462b1 Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Thu Mar 21 09:39:52 2019 +0800 rhashtable: Still do rehash when we get EEXIST As it stands if a shrink is delayed because of an outstanding rehash, we will go into a rescheduling loop without ever doing the rehash. This patch fixes this by still carrying out the rehash and then rescheduling so that we can shrink after the completion of the rehash should it still be necessary. The return value of EEXIST captures this case and other cases (e.g., another thread expanded/rehashed the table at the same time) where we should still proceed with the rehash. Fixes: da20420f83ea ("rhashtable: Add nested tables") Reported-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Josh Elsasser <jelsasser@appneta.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 6b70fc94afd165342876e53fc4b2f7d085009945 Author: Wang Hai <wanghai26@huawei.com> Date: Wed Mar 20 14:25:05 2019 -0400 net-sysfs: Fix memory leak in netdev_register_kobject When registering struct net_device, it will call register_netdevice -> netdev_register_kobject -> device_initialize(dev); dev_set_name(dev, "%s", ndev->name) device_add(dev) register_queue_kobjects(ndev) In netdev_register_kobject(), if device_add(dev) or register_queue_kobjects(ndev) failed. Register_netdevice() will return error, causing netdev_freemem(ndev) to be called to free net_device, however put_device(&dev->dev)->..-> kobject_cleanup() won't be called, resulting in a memory leak. syzkaller report this: BUG: memory leak unreferenced object 0xffff8881f4fad168 (size 8): comm "syz-executor.0", pid 3575, jiffies 4294778002 (age 20.134s) hex dump (first 8 bytes): 77 70 61 6e 30 00 ff ff wpan0... backtrace: [<000000006d2d91d7>] kstrdup_const+0x3d/0x50 mm/util.c:73 [<00000000ba9ff953>] kvasprintf_const+0x112/0x170 lib/kasprintf.c:48 [<000000005555ec09>] kobject_set_name_vargs+0x55/0x130 lib/kobject.c:281 [<0000000098d28ec3>] dev_set_name+0xbb/0xf0 drivers/base/core.c:1915 [<00000000b7553017>] netdev_register_kobject+0xc0/0x410 net/core/net-sysfs.c:1727 [<00000000c826a797>] register_netdevice+0xa51/0xeb0 net/core/dev.c:8711 [<00000000857bfcfd>] cfg802154_update_iface_num.isra.2+0x13/0x90 [ieee802154] [<000000003126e453>] ieee802154_llsec_fill_key_id+0x1d5/0x570 [ieee802154] [<00000000e4b3df51>] 0xffffffffc1500e0e [<00000000b4319776>] platform_drv_probe+0xc6/0x180 drivers/base/platform.c:614 [<0000000037669347>] really_probe+0x491/0x7c0 drivers/base/dd.c:509 [<000000008fed8862>] driver_probe_device+0xdc/0x240 drivers/base/dd.c:671 [<00000000baf52041>] device_driver_attach+0xf2/0x130 drivers/base/dd.c:945 [<00000000c7cc8dec>] __driver_attach+0x10e/0x210 drivers/base/dd.c:1022 [<0000000057a757c2>] bus_for_each_dev+0x154/0x1e0 drivers/base/bus.c:304 [<000000005f5ae04b>] bus_add_driver+0x427/0x5e0 drivers/base/bus.c:645 Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Wang Hai <wanghai26@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> commit ee3bbfe806cdb46b02cda63626cb50a7a7b19fc5 Author: Davide Caratti <dcaratti@redhat.com> Date: Wed Mar 20 15:00:16 2019 +0100 net/sched: let actions use RCU to access 'goto_chain' use RCU when accessing the action chain, to avoid use after free in the traffic path when 'goto chain' is replaced on existing TC actions (see script below). Since the control action is read in the traffic path without holding the action spinlock, we need to explicitly ensure that a->goto_chain is not NULL before dereferencing (i.e it's not sufficient to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL dereferences in tcf_action_goto_chain_exec() when the following script: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto udp action pass index 4 # tc filter add dev dd0 ingress protocol ip flower \ > ip_proto udp action csum udp goto chain 42 index 66 # tc chain del dev dd0 chain 42 ingress (start UDP traffic towards dd0) # tc action replace action csum udp pass index 66 was run repeatedly for several hours. Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Suggested-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit fe384e2fa36ca084a456fd30558cccc75b4b3fbd Author: Davide Caratti <dcaratti@redhat.com> Date: Wed Mar 20 15:00:15 2019 +0100 net/sched: don't dereference a->goto_chain to read the chain index callers of tcf_gact_goto_chain_index() can potentially read an old value of the chain index, or even dereference a NULL 'goto_chain' pointer, because 'goto_chain' and 'tcfa_action' are read in the traffic path without caring of concurrent write in the control path. The most recent value of chain index can be read also from a->tcfa_action (it's encoded there together with TC_ACT_GOTO_CHAIN bits), so we don't really need to dereference 'goto_chain': just read the chain id from the control action. Fixes: e457d86ada27 ("net: sched: add couple of goto_chain helpers") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 7e0c8892df7d0316ec853adbf84db536cd53258c Author: Davide Caratti <dcaratti@redhat.com> Date: Wed Mar 20 15:00:14 2019 +0100 net/sched: act_vlan: validate the control action inside init() the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action vlan pop pass index 90 # tc actions replace action vlan \ > pop goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action vlan had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: vlan pop goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00 RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00 R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0 FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387 RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000 R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_vlan_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit e5fdabacbffc5d321bf9f51410fe0db0834606eb Author: Davide Caratti <dcaratti@redhat.com> Date: Wed Mar 20 15:00:13 2019 +0100 net/sched: act_tunnel_key: validate the control action inside init() the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \ > nocsum id 1 pass index 90 # tc actions replace action tunnel_key \ > set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \ > goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action tunnel_key had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2.0 key_id 1 dst_port 3128 nocsum goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002 RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246 RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000 R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40 FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00 R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_tunnel_key_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> commit 7c3d825d12c5e6056ea73c0a202cbdef9d9ab9e6 Author: Davide Caratti <dcaratti@redhat.com> Date: Wed Mar 20 15:00:12 2019 +0100 net/sched: act_skbmod: validate the control action inside init() the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90 # tc actions replace action skbmod \ > set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action skbmod had the following output: src MAC address <00:c1:a0:c1:a0:00> src MAC address <00:c1:a0:c1:a0:00> Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536 Hardware name: Red…

Nikolay reported the following KASAN splat when running btrfs/048: [ 1843.470920] ================================================================== [ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0 [ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979 [ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default torvalds#536 [ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1843.476322] Call Trace: [ 1843.476674] dump_stack+0x7c/0xbb [ 1843.477132] ? strncmp+0x66/0xb0 [ 1843.477587] print_address_description+0x114/0x320 [ 1843.478256] ? strncmp+0x66/0xb0 [ 1843.478740] ? strncmp+0x66/0xb0 [ 1843.479185] __kasan_report+0x14e/0x192 [ 1843.479759] ? strncmp+0x66/0xb0 [ 1843.480209] kasan_report+0xe/0x20 [ 1843.480679] strncmp+0x66/0xb0 [ 1843.481105] prop_compression_validate+0x24/0x70 [ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160 [ 1843.482509] __vfs_setxattr+0x71/0x90 [ 1843.483012] __vfs_setxattr_noperm+0x84/0x130 [ 1843.483606] vfs_setxattr+0xac/0xb0 [ 1843.484085] setxattr+0x18c/0x230 [ 1843.484546] ? vfs_setxattr+0xb0/0xb0 [ 1843.485048] ? __mod_node_page_state+0x1f/0xa0 [ 1843.485672] ? _raw_spin_unlock+0x24/0x40 [ 1843.486233] ? __handle_mm_fault+0x988/0x1290 [ 1843.486823] ? lock_acquire+0xb4/0x1e0 [ 1843.487330] ? lock_acquire+0xb4/0x1e0 [ 1843.487842] ? mnt_want_write_file+0x3c/0x80 [ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40 [ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70 [ 1843.489707] ? __sb_start_write+0x158/0x200 [ 1843.490278] ? mnt_want_write_file+0x3c/0x80 [ 1843.490855] ? __mnt_want_write+0x98/0xe0 [ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1843.493201] do_syscall_64+0x6c/0x230 [ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.495041] RIP: 0033:0x7fa7a8a7707a [ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48 [ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be [ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a [ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003 [ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000 [ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91 [ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff [ 1843.505268] Allocated by task 3979: [ 1843.505771] save_stack+0x19/0x80 [ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0 [ 1843.506836] setxattr+0xeb/0x230 [ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.507886] do_syscall_64+0x6c/0x230 [ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.509558] Freed by task 0: [ 1843.510188] (stack is not available) [ 1843.511309] The buggy address belongs to the object at ffff888111e369e0 which belongs to the cache kmalloc-8 of size 8 [ 1843.514095] The buggy address is located 2 bytes inside of 8-byte region [ffff888111e369e0, ffff888111e369e8) [ 1843.516524] The buggy address belongs to the page: [ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0 [ 1843.519993] flags: 0x4404000010200(slab|head) [ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300 [ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000 [ 1843.524281] page dumped because: kasan: bad access detected [ 1843.525936] Memory state around the buggy address: [ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc [ 1843.531877] ^ [ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.536468] ================================================================== This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read. Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e532 ("btrfs: prop: fix vanished compression property after failed set") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

commit aa53e3b upstream. Nikolay reported the following KASAN splat when running btrfs/048: [ 1843.470920] ================================================================== [ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0 [ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979 [ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default torvalds#536 [ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1843.476322] Call Trace: [ 1843.476674] dump_stack+0x7c/0xbb [ 1843.477132] ? strncmp+0x66/0xb0 [ 1843.477587] print_address_description+0x114/0x320 [ 1843.478256] ? strncmp+0x66/0xb0 [ 1843.478740] ? strncmp+0x66/0xb0 [ 1843.479185] __kasan_report+0x14e/0x192 [ 1843.479759] ? strncmp+0x66/0xb0 [ 1843.480209] kasan_report+0xe/0x20 [ 1843.480679] strncmp+0x66/0xb0 [ 1843.481105] prop_compression_validate+0x24/0x70 [ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160 [ 1843.482509] __vfs_setxattr+0x71/0x90 [ 1843.483012] __vfs_setxattr_noperm+0x84/0x130 [ 1843.483606] vfs_setxattr+0xac/0xb0 [ 1843.484085] setxattr+0x18c/0x230 [ 1843.484546] ? vfs_setxattr+0xb0/0xb0 [ 1843.485048] ? __mod_node_page_state+0x1f/0xa0 [ 1843.485672] ? _raw_spin_unlock+0x24/0x40 [ 1843.486233] ? __handle_mm_fault+0x988/0x1290 [ 1843.486823] ? lock_acquire+0xb4/0x1e0 [ 1843.487330] ? lock_acquire+0xb4/0x1e0 [ 1843.487842] ? mnt_want_write_file+0x3c/0x80 [ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40 [ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70 [ 1843.489707] ? __sb_start_write+0x158/0x200 [ 1843.490278] ? mnt_want_write_file+0x3c/0x80 [ 1843.490855] ? __mnt_want_write+0x98/0xe0 [ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1843.493201] do_syscall_64+0x6c/0x230 [ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.495041] RIP: 0033:0x7fa7a8a7707a [ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48 [ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be [ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a [ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003 [ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000 [ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91 [ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff [ 1843.505268] Allocated by task 3979: [ 1843.505771] save_stack+0x19/0x80 [ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0 [ 1843.506836] setxattr+0xeb/0x230 [ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.507886] do_syscall_64+0x6c/0x230 [ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.509558] Freed by task 0: [ 1843.510188] (stack is not available) [ 1843.511309] The buggy address belongs to the object at ffff888111e369e0 which belongs to the cache kmalloc-8 of size 8 [ 1843.514095] The buggy address is located 2 bytes inside of 8-byte region [ffff888111e369e0, ffff888111e369e8) [ 1843.516524] The buggy address belongs to the page: [ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0 [ 1843.519993] flags: 0x4404000010200(slab|head) [ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300 [ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000 [ 1843.524281] page dumped because: kasan: bad access detected [ 1843.525936] Memory state around the buggy address: [ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc [ 1843.531877] ^ [ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.536468] ================================================================== This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read. Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e532 ("btrfs: prop: fix vanished compression property after failed set") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa53e3b upstream. Nikolay reported the following KASAN splat when running btrfs/048: [ 1843.470920] ================================================================== [ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0 [ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979 [ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default torvalds#536 [ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1843.476322] Call Trace: [ 1843.476674] dump_stack+0x7c/0xbb [ 1843.477132] ? strncmp+0x66/0xb0 [ 1843.477587] print_address_description+0x114/0x320 [ 1843.478256] ? strncmp+0x66/0xb0 [ 1843.478740] ? strncmp+0x66/0xb0 [ 1843.479185] __kasan_report+0x14e/0x192 [ 1843.479759] ? strncmp+0x66/0xb0 [ 1843.480209] kasan_report+0xe/0x20 [ 1843.480679] strncmp+0x66/0xb0 [ 1843.481105] prop_compression_validate+0x24/0x70 [ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160 [ 1843.482509] __vfs_setxattr+0x71/0x90 [ 1843.483012] __vfs_setxattr_noperm+0x84/0x130 [ 1843.483606] vfs_setxattr+0xac/0xb0 [ 1843.484085] setxattr+0x18c/0x230 [ 1843.484546] ? vfs_setxattr+0xb0/0xb0 [ 1843.485048] ? __mod_node_page_state+0x1f/0xa0 [ 1843.485672] ? _raw_spin_unlock+0x24/0x40 [ 1843.486233] ? __handle_mm_fault+0x988/0x1290 [ 1843.486823] ? lock_acquire+0xb4/0x1e0 [ 1843.487330] ? lock_acquire+0xb4/0x1e0 [ 1843.487842] ? mnt_want_write_file+0x3c/0x80 [ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40 [ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70 [ 1843.489707] ? __sb_start_write+0x158/0x200 [ 1843.490278] ? mnt_want_write_file+0x3c/0x80 [ 1843.490855] ? __mnt_want_write+0x98/0xe0 [ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1843.493201] do_syscall_64+0x6c/0x230 [ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.495041] RIP: 0033:0x7fa7a8a7707a [ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48 [ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be [ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a [ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003 [ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000 [ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91 [ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff [ 1843.505268] Allocated by task 3979: [ 1843.505771] save_stack+0x19/0x80 [ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0 [ 1843.506836] setxattr+0xeb/0x230 [ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.507886] do_syscall_64+0x6c/0x230 [ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.509558] Freed by task 0: [ 1843.510188] (stack is not available) [ 1843.511309] The buggy address belongs to the object at ffff888111e369e0 which belongs to the cache kmalloc-8 of size 8 [ 1843.514095] The buggy address is located 2 bytes inside of 8-byte region [ffff888111e369e0, ffff888111e369e8) [ 1843.516524] The buggy address belongs to the page: [ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0 [ 1843.519993] flags: 0x4404000010200(slab|head) [ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300 [ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000 [ 1843.524281] page dumped because: kasan: bad access detected [ 1843.525936] Memory state around the buggy address: [ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc [ 1843.531877] ^ [ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.536468] ================================================================== This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read. Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e532 ("btrfs: prop: fix vanished compression property after failed set") Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> [bwh: Backported to 3.16: - "zstd" is not supported - Add definition of btrfs_compression_types[] - Include compression.h in props.c - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit aa53e3b ] Nikolay reported the following KASAN splat when running btrfs/048: [ 1843.470920] ================================================================== [ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0 [ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979 [ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default torvalds#536 [ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 1843.476322] Call Trace: [ 1843.476674] dump_stack+0x7c/0xbb [ 1843.477132] ? strncmp+0x66/0xb0 [ 1843.477587] print_address_description+0x114/0x320 [ 1843.478256] ? strncmp+0x66/0xb0 [ 1843.478740] ? strncmp+0x66/0xb0 [ 1843.479185] __kasan_report+0x14e/0x192 [ 1843.479759] ? strncmp+0x66/0xb0 [ 1843.480209] kasan_report+0xe/0x20 [ 1843.480679] strncmp+0x66/0xb0 [ 1843.481105] prop_compression_validate+0x24/0x70 [ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160 [ 1843.482509] __vfs_setxattr+0x71/0x90 [ 1843.483012] __vfs_setxattr_noperm+0x84/0x130 [ 1843.483606] vfs_setxattr+0xac/0xb0 [ 1843.484085] setxattr+0x18c/0x230 [ 1843.484546] ? vfs_setxattr+0xb0/0xb0 [ 1843.485048] ? __mod_node_page_state+0x1f/0xa0 [ 1843.485672] ? _raw_spin_unlock+0x24/0x40 [ 1843.486233] ? __handle_mm_fault+0x988/0x1290 [ 1843.486823] ? lock_acquire+0xb4/0x1e0 [ 1843.487330] ? lock_acquire+0xb4/0x1e0 [ 1843.487842] ? mnt_want_write_file+0x3c/0x80 [ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40 [ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70 [ 1843.489707] ? __sb_start_write+0x158/0x200 [ 1843.490278] ? mnt_want_write_file+0x3c/0x80 [ 1843.490855] ? __mnt_want_write+0x98/0xe0 [ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 1843.493201] do_syscall_64+0x6c/0x230 [ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.495041] RIP: 0033:0x7fa7a8a7707a [ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48 [ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be [ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a [ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003 [ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000 [ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91 [ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff [ 1843.505268] Allocated by task 3979: [ 1843.505771] save_stack+0x19/0x80 [ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0 [ 1843.506836] setxattr+0xeb/0x230 [ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0 [ 1843.507886] do_syscall_64+0x6c/0x230 [ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1843.509558] Freed by task 0: [ 1843.510188] (stack is not available) [ 1843.511309] The buggy address belongs to the object at ffff888111e369e0 which belongs to the cache kmalloc-8 of size 8 [ 1843.514095] The buggy address is located 2 bytes inside of 8-byte region [ffff888111e369e0, ffff888111e369e8) [ 1843.516524] The buggy address belongs to the page: [ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0 [ 1843.519993] flags: 0x4404000010200(slab|head) [ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300 [ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000 [ 1843.524281] page dumped because: kasan: bad access detected [ 1843.525936] Memory state around the buggy address: [ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc [ 1843.531877] ^ [ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1843.536468] ================================================================== This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read. Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values. Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 272e532 ("btrfs: prop: fix vanished compression property after failed set") CC: stable@vger.kernel.org # 5.1+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a85ee64 ] The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34 WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ torvalds#536 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001dfcf9a0 x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000 x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210 x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118 x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000 x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8 x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14 x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0 x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1d0/0x25c debug_check_no_obj_freed+0x24/0xa0 kfree+0x11c/0x440 cpufreq_dbs_governor_exit+0xa8/0xac cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x29c/0x570 store_scaling_governor+0x110/0x154 store+0xb0/0xe0 sysfs_kf_write+0x58/0x84 kernfs_fop_write_iter+0x12c/0x1c0 new_sync_write+0xf0/0x18c vfs_write+0x1cc/0x220 ksys_write+0x74/0x100 __arm64_sys_write+0x28/0x3c invoke_syscall.constprop.0+0x58/0xf0 do_el0_svc+0x70/0x170 el0_svc+0x54/0x190 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 irq event stamp: 189006 hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0 hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0 softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0 softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4 [ rjw: Because can be freed by the gov_attr_set_put() in cpufreq_dbs_governor_exit() now, it is also necessary to put the invocation of the governor ->exit() callback into the new cpufreq_dbs_data_release() function. ] Fixes: c443563 ("cpufreq: governor: New sysfs show/store callbacks for governor tunables") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a85ee64 upstream. The struct dbs_data embeds a struct gov_attr_set and the struct gov_attr_set embeds a kobject. Since every kobject must have a release() method and we can't use kfree() to free it directly, so introduce cpufreq_dbs_data_release() to release the dbs_data via the kobject::release() method. This fixes the calltrace like below: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34 WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ torvalds#536 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001dfcf9a0 x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000 x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210 x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118 x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000 x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8 x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14 x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0 x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001 x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1d0/0x25c debug_check_no_obj_freed+0x24/0xa0 kfree+0x11c/0x440 cpufreq_dbs_governor_exit+0xa8/0xac cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x29c/0x570 store_scaling_governor+0x110/0x154 store+0xb0/0xe0 sysfs_kf_write+0x58/0x84 kernfs_fop_write_iter+0x12c/0x1c0 new_sync_write+0xf0/0x18c vfs_write+0x1cc/0x220 ksys_write+0x74/0x100 __arm64_sys_write+0x28/0x3c invoke_syscall.constprop.0+0x58/0xf0 do_el0_svc+0x70/0x170 el0_svc+0x54/0x190 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x1a0/0x1a4 irq event stamp: 189006 hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0 hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0 softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0 softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4 [ rjw: Because can be freed by the gov_attr_set_put() in cpufreq_dbs_governor_exit() now, it is also necessary to put the invocation of the governor ->exit() callback into the new cpufreq_dbs_data_release() function. ] Fixes: c443563 ("cpufreq: governor: New sysfs show/store callbacks for governor tunables") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed typo in time.c

15bd388

Randomly stumbled upon this: LINE 184: "Verify we're witin" -> "Verify we're within"

drewgrubb0 closed this Mar 20, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fixed typo in time.c #536

Fixed typo in time.c #536

drewgrubb0 commented Mar 20, 2018 •

edited

Loading

Fixed typo in time.c #536

Fixed typo in time.c #536

Conversation

drewgrubb0 commented Mar 20, 2018 • edited Loading

drewgrubb0 commented Mar 20, 2018 •

edited

Loading