Monoprice MP i3 Mini Build

This is a rebranded Wanhao Duplicator i3 Mini, NOT the Monoprice Maker Select Mini V1 & V2/Malyan M200 rebrands.
thisiskeithb · Dec 1, 2024 · a78ee4e · a78ee4e
1 parent 3591eb5
commit a78ee4e
Show file tree

Hide file tree

Showing 7 changed files with 232 additions and 216 deletions.
diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml
@@ -1,3 +1,2 @@
-github: [thinkyhead]
-patreon: thinkyhead
-custom: ["https://www.thinkyhead.com/donate-to-marlin"]
+github: [thisiskeithb]
+ko_fi: thisiskeithb
diff --git a/.github/workflows/test-monoprice-mp-i3-mini-build.yml b/.github/workflows/test-monoprice-mp-i3-mini-build.yml
@@ -0,0 +1,46 @@
+#
+# test-monoprice-mp-i3-mini-build.yml
+# Do test build to catch compile errors
+#
+
+name: Monoprice MP i3 Mini CI
+
+on:
+  pull_request:
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+  push:
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  test_builds:
+    name: Test Build
+    if: github.repository == 'thisiskeithb/Marlin'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Check Out Commit
+      uses: actions/checkout@v4
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U platformio
+        pio upgrade --dev
+        pio pkg update --global
+
+    - name: Build Marlin
+      run: pio run
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -61,14 +61,14 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Original author or contributor.
+#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Wanhao i3 Mini)" // Original author or contributor.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 // @section machine
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_WANHAO_ONEPLUS
 #endif
 
 // @section serial
@@ -128,7 +128,7 @@
 //#define BLUETOOTH
 
 // Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "i3 Mini"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -566,15 +566,15 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  */
-#define TEMP_SENSOR_0 1
+#define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_BED 11
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
@@ -650,15 +650,15 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 275
+#define HEATER_0_MAXTEMP 305 // E3D V6 with all-metal heatbreak
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
 #define HEATER_4_MAXTEMP 275
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      150
+#define BED_MAXTEMP      130
 #define CHAMBER_MAXTEMP  60
 
 /**
@@ -894,8 +894,8 @@
   #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                   // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
 
-  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
-  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+  #define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+  #define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
 #endif
 
 // @section safety
@@ -1223,10 +1223,10 @@
  * Set to the state (HIGH or LOW) that applies to each endstop.
  */
 #define X_MIN_ENDSTOP_HIT_STATE HIGH
-#define X_MAX_ENDSTOP_HIT_STATE HIGH
-#define Y_MIN_ENDSTOP_HIT_STATE HIGH
+#define X_MAX_ENDSTOP_HIT_STATE LOW
+#define Y_MIN_ENDSTOP_HIT_STATE LOW
 #define Y_MAX_ENDSTOP_HIT_STATE HIGH
-#define Z_MIN_ENDSTOP_HIT_STATE HIGH
+#define Z_MIN_ENDSTOP_HIT_STATE LOW
 #define Z_MAX_ENDSTOP_HIT_STATE HIGH
 #define I_MIN_ENDSTOP_HIT_STATE HIGH
 #define I_MAX_ENDSTOP_HIT_STATE HIGH
@@ -1240,7 +1240,7 @@
 #define V_MAX_ENDSTOP_HIT_STATE HIGH
 #define W_MIN_ENDSTOP_HIT_STATE HIGH
 #define W_MAX_ENDSTOP_HIT_STATE HIGH
-#define Z_MIN_PROBE_ENDSTOP_HIT_STATE HIGH
+#define Z_MIN_PROBE_ENDSTOP_HIT_STATE LOW
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
@@ -1288,7 +1288,7 @@
  * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 94 }
 
 /**
  * Enable support for M92. Disable to save at least ~530 bytes of flash.
@@ -1300,7 +1300,7 @@
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 400, 400, 15, 50 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1313,7 +1313,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 3000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1328,9 +1328,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION          800    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION  800    // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -1369,7 +1369,7 @@
  *   https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  */
 #if DISABLED(CLASSIC_JERK)
-  #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+  #define JUNCTION_DEVIATION_MM 0.05  // (mm) Distance from real junction edge
   #define JD_HANDLE_SMALL_SEGMENTS    // Use curvature estimation instead of just the junction angle
                                       // for small segments (< 1mm) with large junction angles (> 135°).
 #endif
@@ -1382,7 +1382,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1806,8 +1806,8 @@
 // @section motion
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
-#define INVERT_Y_DIR true
+#define INVERT_X_DIR true
+#define INVERT_Y_DIR false
 #define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
 //#define INVERT_J_DIR false
@@ -1850,7 +1850,7 @@
 
 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
-#define X_HOME_DIR -1
+#define X_HOME_DIR 1
 #define Y_HOME_DIR -1
 #define Z_HOME_DIR -1
 //#define I_HOME_DIR -1
@@ -1878,16 +1878,16 @@
 // @section geometry
 
 // The size of the printable area
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 125
+#define Y_BED_SIZE 140
 
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
 #define Y_MIN_POS 0
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 100
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1939,7 +1939,7 @@
 #endif
 
 #if ANY(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+  #define SOFT_ENDSTOPS_MENU_ITEM    // Enable/Disable software endstops from the LCD
 #endif
 
 /**
@@ -2102,7 +2102,7 @@
 //#define AUTO_BED_LEVELING_LINEAR
 //#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
-//#define MESH_BED_LEVELING
+#define MESH_BED_LEVELING
 
 /**
  * Commands to execute at the end of G29 probing.
@@ -2263,16 +2263,16 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-//#define LCD_BED_LEVELING
+#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define MESH_EDIT_MENU          // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-//#define LCD_BED_TRAMMING
+#define LCD_BED_TRAMMING
 
 #if ENABLED(LCD_BED_TRAMMING)
   #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
@@ -2420,13 +2420,13 @@
  *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  */
-//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS       // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
-  //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
-  //#define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
+  #define EEPROM_AUTO_INIT    // Init EEPROM automatically on any errors.
+  #define EEPROM_INIT_NOW     // Init EEPROM on first boot after a new build.
 #endif
 
 // @section host
@@ -2464,9 +2464,9 @@
 #define PREHEAT_1_TEMP_CHAMBER 35
 #define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
-#define PREHEAT_2_LABEL       "ABS"
+#define PREHEAT_2_LABEL       "PETG"
 #define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED    110
+#define PREHEAT_2_TEMP_BED     80
 #define PREHEAT_2_TEMP_CHAMBER 35
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
@@ -2483,11 +2483,11 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 20 }
   #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
   #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
@@ -2619,7 +2619,7 @@
  *
  * View the current statistics with M78.
  */
-//#define PRINTCOUNTER
+#define PRINTCOUNTER
 #if ENABLED(PRINTCOUNTER)
   #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print. A value of 0 will save stats at end of print.
 #endif
@@ -2665,7 +2665,7 @@
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
  */
-//#define SDSUPPORT
+#define SDSUPPORT
 
 /**
  * SD CARD: ENABLE CRC
@@ -2736,13 +2736,13 @@
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 4
+#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 1
+#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -2792,16 +2792,16 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
-//#define INDIVIDUAL_AXIS_HOMING_SUBMENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_SUBMENU
 
 //
 // SPEAKER/BUZZER
 //
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-//#define SPEAKER
+#define SPEAKER
 
 //
 // The duration and frequency for the UI feedback sound.
@@ -3025,7 +3025,7 @@
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel
 //
-//#define MINIPANEL
+#define MINIPANEL
 
 //
 // MaKr3d Makr-Panel with graphic controller and SD support.
@@ -3532,7 +3532,7 @@
 // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
 // which is not as annoying as with the hardware PWM. On the other hand, if this frequency
 // is too low, you should also increment SOFT_PWM_SCALE.
-//#define FAN_SOFT_PWM
+#define FAN_SOFT_PWM
 
 // Incrementing this by 1 will double the software PWM frequency,
 // affecting heaters, and the fan if FAN_SOFT_PWM is enabled.