[pull] bugfix-2.1.x from MarlinFirmware:bugfix-2.1.x #451
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* 🩹 No active extruder when any of several incompatible features are enabled
Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
* Fixes disable NLE on unretract #26808, which reported blobs at the start of lines during unretract.
* Allow G34 accuracy down to 0.001mm, previous minimum was 0.01mm.
* Add a swap Z & E1 option for BIQU BX Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory. * Add BOARD URL, DIAG pin info, update pin comments * Add WIFISUPPORT defines for documentation purposes WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT*, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality. * Sanity check TOUCH_SCREEN_CALIBRATION on GT911 TFTs (BIQU BX TFT70) Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.
* 🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com> * Update Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h --------- Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
See Commits and Changes for more details.
Created by
pull[bot]
Can you help keep this open source service alive? 💖 Please sponsor : )