Raspberry PI library for MFRC522.
Example program, Read.cpp, which will read rfid cards.
dependecies: ``` This library uses the bcm2835 library found at: http://www.airspayce.com/mikem/bcm2835/bcm2835-1.50.tar.gz
sudo apt-get install libsigc++-dev ``` Or Alternatively install_bcm script should get it ready:
sudo install_bcm.sh
To build:
make all
To Run:
sudo ./rfid_admin
The following table shows the pin layout used:
| Signal | MFRC522 | Raspberry Pi |
|---|---|---|
| Pin | Pin | |
| RST/Reset | RST | 22 |
| SPI SS | SDA | 24 |
| SPI MOSI | MOSI | 19 |
| SPI MISO | MISO | 21 |
| SPI SCK | SCK | 23 |
| 3V | 3v | 1 |
| GND | GND | 25 |
- Credits
Thanks to @luvbum introduced bcm2835 instead of Arduino SPI https://github.com/luvbum/RPi-RFID.git
Thanks to @miguelbalboa for the awesome work https://github.com/miguelbalboa/rfid.git
Thanks to @Calvin-LL for the stable BCM2835 -> Arduino API https://github.com/Calvin-LL/RPi-MFRC522.git
Thanks to Apple Inc. for the free BCM2835 library