Added ID for Atheros AR3011 found in ath3k.c. #133

mattbraga · 2012-10-07T17:24:12Z

As per the instructions on this page (http://wireless.kernel.org/en/users/Drivers/ath3k) I'm hoping this will enable support for my particular model of ASUS USB-BT211 which uses the AR3011 chipset.

fixed: WARNING: simple_strtol is obsolete, use kstrtol instead #133: FILE: ad7414.c:133: + long temp = simple_strtol(buf, NULL, 10); Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

This causes: [ 1.107511] xhci-hcd 8b39000.xhci_v2: xHCI Host Controller [ 1.113070] xhci-hcd 8b39000.xhci_v2: new USB bus registered, assigned bus number 2 [ 1.120774] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.129082] hub 2-0:1.0: USB hub found [ 1.132904] Unhandled fault: synchronous external abort (0x1210) at 0xf09a4420 [ 1.140139] pgd = bf15c398 [ 1.142848] [f09a4420] *pgd=80000040007003, *pmd=6e81b003, *pte=c0000008b39713 [ 1.150091] Internal error: : 1210 [#1] SMP ARM [ 1.154632] brcmstb_gisb_arb_decode_addr: die at 0x8b39420 [R ], core: cpu_0 [ 1.161689] Modules linked in: [ 1.164750] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0+ #133 [ 1.170937] Hardware name: Broadcom STB (Flattened Device Tree) [ 1.176875] PC is at xhci_hub_control+0x234/0x1da8 [ 1.181672] LR is at xhci_hub_control+0x64/0x1da8 ... [ 1.657245] [<c0756990>] (xhci_hub_control) from [<c071a220>] (usb_hcd_submit_urb+0x6a4/0xa1c) [ 1.665873] [<c071a220>] (usb_hcd_submit_urb) from [<c071be98>] (usb_start_wait_urb+0x4c/0x138) [ 1.674587] [<c071be98>] (usb_start_wait_urb) from [<c071c028>] (usb_control_msg+0xa4/0xd0) [ 1.682953] [<c071c028>] (usb_control_msg) from [<c0716a74>] (hub_probe+0x2b0/0xe04) [ 1.690709] [<c0716a74>] (hub_probe) from [<c0720584>] (usb_probe_interface+0xf0/0x2a8) [ 1.698730] [<c0720584>] (usb_probe_interface) from [<c061cee8>] (driver_probe_device+0x27c/0x494) [ 1.707705] [<c061cee8>] (driver_probe_device) from [<c061b0f8>] (bus_for_each_drv+0x44/0x94) [ 1.716244] [<c061b0f8>] (bus_for_each_drv) from [<c061cb28>] (__device_attach+0xb0/0x140) [ 1.724522] [<c061cb28>] (__device_attach) from [<c061bf0c>] (bus_probe_device+0x84/0x8c) [ 1.732713] [<c061bf0c>] (bus_probe_device) from [<c061a120>] (device_add+0x3b0/0x5c0) [ 1.740644] [<c061a120>] (device_add) from [<c071e470>] (usb_set_configuration+0x47c/0x800) [ 1.749012] [<c071e470>] (usb_set_configuration) from [<c0728c6c>] (generic_probe+0x2c/0x78) [ 1.757464] [<c0728c6c>] (generic_probe) from [<c061cee8>] (driver_probe_device+0x27c/0x494) [ 1.765915] [<c061cee8>] (driver_probe_device) from [<c061b0f8>] (bus_for_each_drv+0x44/0x94) [ 1.774453] [<c061b0f8>] (bus_for_each_drv) from [<c061cb28>] (__device_attach+0xb0/0x140) [ 1.782730] [<c061cb28>] (__device_attach) from [<c061bf0c>] (bus_probe_device+0x84/0x8c) [ 1.790920] [<c061bf0c>] (bus_probe_device) from [<c061a120>] (device_add+0x3b0/0x5c0) [ 1.798850] [<c061a120>] (device_add) from [<c0713fd0>] (usb_new_device+0x1bc/0x3b4) [ 1.806606] [<c0713fd0>] (usb_new_device) from [<c071904c>] (usb_add_hcd+0x5bc/0x8e4) [ 1.814450] [<c071904c>] (usb_add_hcd) from [<c075e8e8>] (xhci_plat_probe+0x508/0x78c) [ 1.822383] [<c075e8e8>] (xhci_plat_probe) from [<c061ece4>] (platform_drv_probe+0x50/0xac) [ 1.830748] [<c061ece4>] (platform_drv_probe) from [<c061cee8>] (driver_probe_device+0x27c/0x494) [ 1.839634] [<c061cee8>] (driver_probe_device) from [<c061d200>] (__driver_attach+0x100/0x11c) [ 1.848259] [<c061d200>] (__driver_attach) from [<c061b050>] (bus_for_each_dev+0x4c/0x9c) [ 1.856450] [<c061b050>] (bus_for_each_dev) from [<c061c20c>] (bus_add_driver+0x1c0/0x264) [ 1.864727] [<c061c20c>] (bus_add_driver) from [<c061dda4>] (driver_register+0x78/0xf4) [ 1.872747] [<c061dda4>] (driver_register) from [<c0201b48>] (do_one_initcall+0x44/0x168) [ 1.880945] [<c0201b48>] (do_one_initcall) from [<c0e00dd4>] (kernel_init_freeable+0x144/0x1d0) [ 1.889663] [<c0e00dd4>] (kernel_init_freeable) from [<c097f858>] (kernel_init+0x8/0x110) [ 1.897860] [<c097f858>] (kernel_init) from [<c0208798>] (ret_from_fork+0x14/0x3c) Signed-off-by: Eric Anholt <eric@anholt.net>

When handling an auth_gss downcall, it's possible to get 0-length opaque object for the acceptor. In the case of a 0-length XDR object, make sure simple_get_netobj() fills in dest->data = NULL, and does not continue to kmemdup() which will set dest->data = ZERO_SIZE_PTR for the acceptor. The trace event code can handle NULL but not ZERO_SIZE_PTR for a string, and so without this patch the rpcgss_context trace event will crash the kernel as follows: [ 162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 162.898693] #PF: supervisor read access in kernel mode [ 162.900830] #PF: error_code(0x0000) - not-present page [ 162.902940] PGD 0 P4D 0 [ 162.904027] Oops: 0000 [#1] SMP PTI [ 162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133 [ 162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 162.910978] RIP: 0010:strlen+0x0/0x20 [ 162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202 [ 162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697 [ 162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010 [ 162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000 [ 162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10 [ 162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028 [ 162.936777] FS: 00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000 [ 162.940067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0 [ 162.945300] Call Trace: [ 162.946428] trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss] [ 162.949308] ? __kmalloc_track_caller+0x35/0x5a0 [ 162.951224] ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss] [ 162.953484] gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss] [ 162.955953] rpc_pipe_write+0x58/0x70 [sunrpc] [ 162.957849] vfs_write+0xcb/0x2c0 [ 162.959264] ksys_write+0x68/0xe0 [ 162.960706] do_syscall_64+0x33/0x40 [ 162.962238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 162.964346] RIP: 0033:0x7f1e1f1e57df Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e4a7d1f ] When handling an auth_gss downcall, it's possible to get 0-length opaque object for the acceptor. In the case of a 0-length XDR object, make sure simple_get_netobj() fills in dest->data = NULL, and does not continue to kmemdup() which will set dest->data = ZERO_SIZE_PTR for the acceptor. The trace event code can handle NULL but not ZERO_SIZE_PTR for a string, and so without this patch the rpcgss_context trace event will crash the kernel as follows: [ 162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 162.898693] #PF: supervisor read access in kernel mode [ 162.900830] #PF: error_code(0x0000) - not-present page [ 162.902940] PGD 0 P4D 0 [ 162.904027] Oops: 0000 [#1] SMP PTI [ 162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133 [ 162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 162.910978] RIP: 0010:strlen+0x0/0x20 [ 162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202 [ 162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697 [ 162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010 [ 162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000 [ 162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10 [ 162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028 [ 162.936777] FS: 00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000 [ 162.940067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0 [ 162.945300] Call Trace: [ 162.946428] trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss] [ 162.949308] ? __kmalloc_track_caller+0x35/0x5a0 [ 162.951224] ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss] [ 162.953484] gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss] [ 162.955953] rpc_pipe_write+0x58/0x70 [sunrpc] [ 162.957849] vfs_write+0xcb/0x2c0 [ 162.959264] ksys_write+0x68/0xe0 [ 162.960706] do_syscall_64+0x33/0x40 [ 162.962238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 162.964346] RIP: 0033:0x7f1e1f1e57df Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e4a7d1f ] When handling an auth_gss downcall, it's possible to get 0-length opaque object for the acceptor. In the case of a 0-length XDR object, make sure simple_get_netobj() fills in dest->data = NULL, and does not continue to kmemdup() which will set dest->data = ZERO_SIZE_PTR for the acceptor. The trace event code can handle NULL but not ZERO_SIZE_PTR for a string, and so without this patch the rpcgss_context trace event will crash the kernel as follows: [ 162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 162.898693] #PF: supervisor read access in kernel mode [ 162.900830] #PF: error_code(0x0000) - not-present page [ 162.902940] PGD 0 P4D 0 [ 162.904027] Oops: 0000 [raspberrypi#1] SMP PTI [ 162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 raspberrypi#133 [ 162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 162.910978] RIP: 0010:strlen+0x0/0x20 [ 162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202 [ 162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697 [ 162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010 [ 162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000 [ 162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10 [ 162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028 [ 162.936777] FS: 00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000 [ 162.940067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0 [ 162.945300] Call Trace: [ 162.946428] trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss] [ 162.949308] ? __kmalloc_track_caller+0x35/0x5a0 [ 162.951224] ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss] [ 162.953484] gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss] [ 162.955953] rpc_pipe_write+0x58/0x70 [sunrpc] [ 162.957849] vfs_write+0xcb/0x2c0 [ 162.959264] ksys_write+0x68/0xe0 [ 162.960706] do_syscall_64+0x33/0x40 [ 162.962238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 162.964346] RIP: 0033:0x7f1e1f1e57df Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7f74563 ] LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80b ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

KASAN report following issue. The root cause is when opening 'hist' file of an instance and accessing 'trace_event_file' in hist_show(), but 'trace_event_file' has been freed due to the instance being removed. 'hist_debug' file has the same problem. To fix it, call tracing_{open,release}_file_tr() in file_operations callback to have the ref count and avoid 'trace_event_file' being freed. BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278 Read of size 8 at addr ffff242541e336b8 by task head/190 CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c raspberrypi#133 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x1c/0x30 dump_stack_lvl+0x44/0x58 print_report+0xf0/0x5a0 kasan_report+0x80/0xc0 __asan_report_load8_noabort+0x1c/0x28 hist_show+0x11e0/0x1278 seq_read_iter+0x344/0xd78 seq_read+0x128/0x1c0 vfs_read+0x198/0x6c8 ksys_read+0xf4/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Allocated by task 188: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_alloc_info+0x20/0x30 __kasan_slab_alloc+0x6c/0x80 kmem_cache_alloc+0x15c/0x4a8 trace_create_new_event+0x84/0x348 __trace_add_new_event+0x18/0x88 event_trace_add_tracer+0xc4/0x1a0 trace_array_create_dir+0x6c/0x100 trace_array_create+0x2e8/0x568 instance_mkdir+0x48/0x80 tracefs_syscall_mkdir+0x90/0xe8 vfs_mkdir+0x3c4/0x610 do_mkdirat+0x144/0x200 __arm64_sys_mkdirat+0x8c/0xc0 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Freed by task 191: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_free_info+0x34/0x58 __kasan_slab_free+0xe4/0x158 kmem_cache_free+0x19c/0x508 event_file_put+0xa0/0x120 remove_event_file_dir+0x180/0x320 event_trace_del_tracer+0xb0/0x180 __remove_instance+0x224/0x508 instance_rmdir+0x44/0x78 tracefs_syscall_rmdir+0xbc/0x140 vfs_rmdir+0x1cc/0x4c8 do_rmdir+0x220/0x2b8 __arm64_sys_unlinkat+0xc0/0x100 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

[ Upstream commit 1cc111b ] KASAN report following issue. The root cause is when opening 'hist' file of an instance and accessing 'trace_event_file' in hist_show(), but 'trace_event_file' has been freed due to the instance being removed. 'hist_debug' file has the same problem. To fix it, call tracing_{open,release}_file_tr() in file_operations callback to have the ref count and avoid 'trace_event_file' being freed. BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278 Read of size 8 at addr ffff242541e336b8 by task head/190 CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x1c/0x30 dump_stack_lvl+0x44/0x58 print_report+0xf0/0x5a0 kasan_report+0x80/0xc0 __asan_report_load8_noabort+0x1c/0x28 hist_show+0x11e0/0x1278 seq_read_iter+0x344/0xd78 seq_read+0x128/0x1c0 vfs_read+0x198/0x6c8 ksys_read+0xf4/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Allocated by task 188: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_alloc_info+0x20/0x30 __kasan_slab_alloc+0x6c/0x80 kmem_cache_alloc+0x15c/0x4a8 trace_create_new_event+0x84/0x348 __trace_add_new_event+0x18/0x88 event_trace_add_tracer+0xc4/0x1a0 trace_array_create_dir+0x6c/0x100 trace_array_create+0x2e8/0x568 instance_mkdir+0x48/0x80 tracefs_syscall_mkdir+0x90/0xe8 vfs_mkdir+0x3c4/0x610 do_mkdirat+0x144/0x200 __arm64_sys_mkdirat+0x8c/0xc0 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Freed by task 191: kasan_save_stack+0x28/0x50 kasan_set_track+0x28/0x38 kasan_save_free_info+0x34/0x58 __kasan_slab_free+0xe4/0x158 kmem_cache_free+0x19c/0x508 event_file_put+0xa0/0x120 remove_event_file_dir+0x180/0x320 event_trace_del_tracer+0xb0/0x180 __remove_instance+0x224/0x508 instance_rmdir+0x44/0x78 tracefs_syscall_rmdir+0xbc/0x140 vfs_rmdir+0x1cc/0x4c8 do_rmdir+0x220/0x2b8 __arm64_sys_unlinkat+0xc0/0x100 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xb0/0x280 do_el0_svc+0x44/0x60 el0_svc+0x34/0x68 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x168/0x170 Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on Apple M1, which (in downstream dts files) has multiple nvmem cells that use the same byte address. This causes the device probe to fail with [ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10' [ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133 [ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT) [ 0.605362] Call trace: [ 0.605365] show_stack+0x18/0x2c [ 0.605374] dump_stack_lvl+0x60/0x80 [ 0.605383] dump_stack+0x18/0x24 [ 0.605388] sysfs_warn_dup+0x64/0x80 [ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4 [ 0.605402] internal_create_group+0x268/0x404 [ 0.605409] sysfs_create_groups+0x38/0x94 [ 0.605415] devm_device_add_groups+0x50/0x94 [ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0 [ 0.605682] nvmem_register+0x38c/0x470 [ 0.605789] devm_nvmem_register+0x1c/0x6c [ 0.605895] apple_efuses_probe+0xe4/0x120 [ 0.606000] platform_probe+0xa8/0xd0 As far as I can tell, this is a problem for any device with multiple cells on different bits of the same address. Avoid the issue by changing the file name to include the first bit number. Fixes: 0331c61 ("nvmem: core: Expose cells through sysfs") Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156 Cc: <regressions@lists.linux.dev> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Rafał Miłecki <rafal@milecki.pl> Cc: Chen-Yu Tsai <wenst@chromium.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <asahi@lists.linux.dev> Cc: Sven Peter <sven@svenpeter.dev> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added ID for Atheros AR3011 found in ath3k.c.

acb6880

mattbraga closed this Oct 12, 2012

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added ID for Atheros AR3011 found in ath3k.c. #133

Added ID for Atheros AR3011 found in ath3k.c. #133

mattbraga commented Oct 7, 2012

Added ID for Atheros AR3011 found in ath3k.c. #133

Added ID for Atheros AR3011 found in ath3k.c. #133

Conversation

mattbraga commented Oct 7, 2012