serial: sh-sci: Initialize spinlock for uart console

commit f38278e upstream.

serial core expects the spinlock to be initialized by the controller
driver for serial console, this patch makes sure the spinlock is
initialized, fixing the below issue:

[    0.865928] BUG: spinlock bad magic on CPU#0, swapper/0/1
[    0.865945]  lock: sci_ports+0x0/0x4c80, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
[    0.865955] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc1+ #112
[    0.865961] Hardware name: HopeRun HiHope RZ/G2H with sub board (DT)
[    0.865968] Call trace:
[    0.865979]  dump_backtrace+0x0/0x1d8
[    0.865985]  show_stack+0x14/0x20
[    0.865996]  dump_stack+0xe8/0x130
[    0.866006]  spin_dump+0x6c/0x88
[    0.866012]  do_raw_spin_lock+0xb0/0xf8
[    0.866023]  _raw_spin_lock_irqsave+0x80/0xa0
[    0.866032]  uart_add_one_port+0x3a4/0x4e0
[    0.866039]  sci_probe+0x504/0x7c8
[    0.866048]  platform_drv_probe+0x50/0xa0
[    0.866059]  really_probe+0xdc/0x330
[    0.866066]  driver_probe_device+0x58/0xb8
[    0.866072]  device_driver_attach+0x6c/0x90
[    0.866078]  __driver_attach+0x88/0xd0
[    0.866085]  bus_for_each_dev+0x74/0xc8
[    0.866091]  driver_attach+0x20/0x28
[    0.866098]  bus_add_driver+0x14c/0x1f8
[    0.866104]  driver_register+0x60/0x110
[    0.866109]  __platform_driver_register+0x40/0x48
[    0.866119]  sci_init+0x2c/0x34
[    0.866127]  do_one_initcall+0x88/0x428
[    0.866137]  kernel_init_freeable+0x2c0/0x328
[    0.866143]  kernel_init+0x10/0x108
[    0.866150]  ret_from_fork+0x10/0x18

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Fixes: a3cb39d ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1593618100-2151-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sh-sci.c

@@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platform_device *dev,
 		sciport->port.flags |= UPF_HARD_FLOW;
 	}
 
+	if (sci_uart_driver.cons->index == sciport->port.line)
+		spin_lock_init(&sciport->port.lock);
+
 	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
 	if (ret) {
 		sci_cleanup_single(sciport);