Kumo Keyboard added with 3 layouts

keyboards/kumo/config.h

@@ -0,0 +1,30 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+#include "config_common.h"
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8847
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    TheVan Keyboards
+#define PRODUCT         MiniVan
+#define DESCRIPTION     Hotswap MiniVan 40%
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+#define BACKLIGHT_LEVELS  1
+#define BACKLIGHT_PIN B7
+#define USB_MAX_POWER_CONSUMPTION 100
+#define DEBOUNCING_DELAY  5
+#define TAPPING_TERM      175
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+#define RGB_DI_PIN D0
+#define RGBLED_NUM 3
+#define RGBLIGHT_CUSTOM_LED_INIT
+#define RGBLIGHT_SLEEP
+#endif

keyboards/kumo/keymaps/LEdiodes/config.h

@@ -0,0 +1,44 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+#include "config.h"
+#include "config_common.h"
+#define VENDOR_ID       0xFEAE
+#define PRODUCT_ID      0x8847
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Kerfoot Industries
+#define PRODUCT         kump
+#define DESCRIPTION     Hotswap MiniVan 40% (Kumo)
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+#define MATRIX_ROW_PINS { D7, B5, F7, D4 }
+#define MATRIX_COL_PINS { D2, D3, D5, D6, B4, B6, F6, F5, F4, F1, F0, B3 }
+#define UNUSED_PINS
+#define DIODE_DIRECTION COL2ROW
+#define BACKLIGHT_LEVELS  5
+#define BACKLIGHT_PIN B7
+#define USB_MAX_POWER_CONSUMPTION 100
+#define DEBOUNCING_DELAY  5
+#define TAPPING_TERM 175
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* AutoShift */
+// #define AUTO_SHIFT_TIMEOUT 100000
+#define NO_AUTO_SHIFT_SPECIAL
+
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+#define RGB_DI_PIN D0
+#define RGBLED_NUM 3
+#define RGBLIGHT_CUSTOM_LED_INIT
+#define RGBLIGHT_SLEEP
+#endif

keyboards/kumo/keymaps/LEdiodes/keymap.c

@@ -0,0 +1,212 @@
+// Normal + arrow layout for MiniVan Kumo
+// Created by LEdiodes on 5-2-19
+
+#include "kumo.h"
+#include "action_layer.h"
+#define ____ KC_TRNS    // Creates an alias for KC_TRNS which means blank key
+
+// Tap Dance & Layer Declarations
+enum {
+        L0 = 0, // Layer zero  - Off   - Default layer
+        L1 = 1, // Layer one   - Blue  - Numbers
+        L2 = 2, // Layer two   - Red   - Macros and Arrows
+        L3 = 3, // Layer three - Green - Media Controls
+        L4 = 4, // Layer four  - Green - Mouse and Arrow Control
+        TD_KC_ESC_F5     = 10, //   Esc   -->   F5
+        TD_KC_WIN_WIN_E  = 11, //   Win   -->   Explorer
+        TD_RBRC_RPRN     = 12, //     (   -->   [
+        TD_SPC_ENT       = 13, //   Spc   -->   Ent
+        TD_DQT_QUOT      = 14, //     "   -->   '
+        TD_LBRC_LPRN     = 15, //     (   -->   )
+        TD_HOME_END      = 16, //  Home   -->   End
+        TD_DOT_QUES      = 17, //     .   -->   ?
+        TD_BSLASH_SLASH  = 18, //     \   -->   /
+        TD_LCTL_HASH     = 19, //  Ctrl   -->   #
+        TERMINAL = SAFE_RANGE,
+};
+
+// Macro Declarations
+enum {
+        snip      = 55, // screenshot with OneNote
+        cad       = 57, // Ctrl+Alt+Del
+        note      = 61, // notepad[].exe
+        pin       = 65, // pin tab in chrome
+        thumbup   = 68, // thumbs up emoji for skype
+        handsh    = 69, // (handshake)
+        bigsm     = 70, // :D
+};
+
+// Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_BSLASH_SLASH]  = ACTION_TAP_DANCE_DOUBLE(KC_BSLASH, KC_SLASH), // Tap once for \, tap twice for /
+  [TD_HOME_END]      = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END),     // Tap once for space, tap twice for enter
+  [TD_DQT_QUOT]      = ACTION_TAP_DANCE_DOUBLE(KC_DQT,	KC_QUOT),    // Tap once for ", tap twice for '
+  [TD_LBRC_LPRN]     = ACTION_TAP_DANCE_DOUBLE(KC_LBRC,	KC_LPRN),    // Tap once for [, tap twice for (
+  [TD_DOT_QUES]      = ACTION_TAP_DANCE_DOUBLE(KC_DOT, KC_QUES),     // Tap once for ., tap twice for ?
+  [TD_RBRC_RPRN]     = ACTION_TAP_DANCE_DOUBLE(KC_RBRC,	KC_RPRN),    // Tap once for left bracket, tap twice for right bracket. (,)
+  [TD_KC_WIN_WIN_E]  = ACTION_TAP_DANCE_DOUBLE(KC_LGUI, LGUI(KC_E)), // Tap once for windows, twice for windows+E to open explorer
+  [TD_KC_ESC_F5]     = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_F5),       // Tap once for Esc, twice for F5 to refresh webpages and stuff
+  [TD_LCTL_HASH]     = ACTION_TAP_DANCE_DOUBLE(KC_LCTL, KC_HASH),    // Tap once for Left Ctrl, twice for #
+  // Other declarations would go here, separated by commas, if you have them
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*  Default Layer 0
+ * ,---------------------------------------------------------------------------.
+ * |L4|EF5|  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  | BckSpc |
+ * |---------------------------------------------------------------------------+
+ * |  Tab  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |L4+Ent |
+ * |---------------------------------------------------------------------------+
+ * | Shift    |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |Shift|    |
+ * |---------------------------------------------------------------------------+
+ * |Ctrl+# | Win+Exp | Alt  |    L3(DEL)  | (L3)SPACE |  L2 | [+( | ]+)  | "+' |
+ * `---------------------------------------------------------------------------'
+ */
+[L0] = KEYMAP(LT(MO(L4),TD(TD_KC_ESC_F5)), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+              LT(MO(L2), KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(MO(L3),KC_ENT), \
+              KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSHIFT, MO(L1), \
+              TD(TD_LCTL_HASH), TD(TD_KC_WIN_WIN_E), KC_LALT, KC_NO, LT(MO(L3), KC_DEL), LT(MO(L3), KC_SPC), MO(L2), TD(TD_LBRC_LPRN), TD(TD_RBRC_RPRN), TD(TD_DQT_QUOT) \
+             ),
+
+/* Blue Layer 1 - Numbers
+ * ,----------------------------------------------------------------------------.
+ * | F1+ | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 |   F12    |
+ * |----------------------------------------------------------------------------+
+ * | 1    |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |    =    |
+ * |----------------------------------------------------------------------------+
+ * |          |     |     |     |     |  '  |  /  |  [  |  ]  |  \  |SHIFT|     |
+ * |----------------------------------------------------------------------------+
+ * | RESET |        |      |             | HOME+END |         |VOL- |MUTE |VOL+ |
+ * `----------------------------------------------------------------------------'
+ */
+[L1] = KEYMAP(LT(KC_F1, KC_GRV), KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+              KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+              ____, ____, ____, ____, ____, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_LSFT, ____, \
+              RESET, ____, ____, KC_NO, ____, TD(TD_HOME_END), ____, KC_VOLD, KC_MUTE, KC_VOLU \
+             ),
+
+/* Red Layer 2 - Macros and Arrows
+ * ,----------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |PGUP | UP  |PGDN |     |          |
+ * |----------------------------------------------------------------------------+
+ * | CAPS |     |     |     |     |     |HOME |LEFT |DOWN |RIGHT|     |         |
+ * |----------------------------------------------------------------------------+
+ * |         |     |     |     |     |     | END |     |     |     |THMBUP|     |
+ * |----------------------------------------------------------------------------+
+ * | RESET |  CAD  |      |             |           |        |SNIP |HNDSHK|NOTE |
+ * `----------------------------------------------------------------------------'
+ */
+[L2] = KEYMAP(____, ____, ____, ____, ____, ____, ____, KC_PGUP, KC_UP, KC_PGDN, ____, ____, \
+              KC_CAPS, ____, ____, ____, ____, ____, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, ____, ____, \
+              ____, ____, ____, ____, ____, ____, KC_END, ____, ____, ____, M(thumbup), ____, \
+              RESET, ____, M(cad), KC_NO, ____, ____, ____, M(snip), M(handsh), M(note) \
+             ),
+
+/* Green Layer 3 - Media Controls
+ * ,---------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |   DEL   |
+ * |---------------------------------------------------------------------------+
+ * |      |     |     |     |     |     |     |     |     |     |     |  VOL+  |
+ * |---------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     |     |     |MUTE |STOP |VOL- |
+ * |---------------------------------------------------------------------------+
+ * |RESET |        |      |             |            |   L2  |PREV |PLAY |NEXT |
+ * `---------------------------------------------------------------------------'
+ */
+[L3] = KEYMAP(____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_DEL, \
+              ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_VOLU, \
+              ____, ____, ____, ____,____, ____, ____, ____, ____, KC_MUTE, KC_MSTP, KC_VOLD, \
+              RESET,  ____, ____, KC_NO, ____, ____, ____, KC_MPRV, KC_MPLY, KC_MNXT \
+             ),
+
+/* Green Layer 4 - Mouse and Arrow Control
+ * ,---------------------------------------------------------------------------.
+ * | BTN1|     |     |     |     |     |     |BTN1 | M-U |BTN2 |     |  BTN2   |
+ * |---------------------------------------------------------------------------+
+ * |      |     |     |     |     |     |     | M-L | M-D | M-R |     |        |
+ * |---------------------------------------------------------------------------+
+ * |         |     |     |     |     |     |     |     |     |     | UP  |     |
+ * |---------------------------------------------------------------------------+
+ * |RESET |        |      |             |            |       |LEFT |DOWN |RIGHT|
+ * `---------------------------------------------------------------------------'
+ */
+[L4] = KEYMAP(KC_BTN1, ____, ____, ____, ____, ____, ____, KC_BTN1, KC_MS_U, KC_BTN2, ____, KC_BTN2, \
+              ____, ____, ____, ____, ____, ____, ____, KC_MS_L, KC_MS_D, KC_MS_R, ____, ____, \
+              ____, ____, ____, ____,____, ____, ____, ____, ____, ____, KC_UP, ____, \
+              RESET,  ____, ____, KC_NO, ____, ____, ____, KC_LEFT, KC_DOWN, KC_RIGHT \
+             ),
+};
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	switch (id) {
+		case snip: // screenshot with OneNote
+			if (record->event.pressed) {
+				return MACRO( D(LSFT), D(LGUI), T(S), U(LGUI), U(LSFT), END );
+			}
+			break;
+		case cad: // Ctrl+Alt+Del
+			if (record->event.pressed) {
+				return MACRO( D(LALT), D(LCTL), D(DEL), U(DEL), U(LCTL), U(LALT) );
+			}
+			break;
+		case note: // notepad.exe
+			if (record->event.pressed) {
+                return MACRO( D(LGUI), T(R), W(100), U(LGUI), T(N), T(O), T(T), T(E), T(P), T(A), T(D), T(DOT), T(E), T(X), T(E), T(ENT), END );
+			}
+      break;
+    case pin:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), D(LSFT), W(10), D(X), U(X), U(LSFT), U(LCTL), END );
+			}
+      break;
+    case thumbup:
+			if (record->event.pressed) {
+				return MACRO( I(10), D(LSFT), T(9), U(LSFT), T(Y), D(LSFT), T(0), U(LSFT), END );
+			}
+      break;
+    case handsh:
+			if (record->event.pressed) {
+				return MACRO( I(10), D(LSFT), T(9), U(LSFT), T(H), T(A), T(N), T(D), T(S), T(H), T(A), T(K), T(E), D(LSFT), T(0), U(LSFT), END );
+			}
+      break;
+    case bigsm:
+			if (record->event.pressed) {
+				return MACRO( I(10), D(LSFT), T(SCOLON), U(LSFT), D(LSFT), T(D), U(LSFT), END );
+			}
+      break;
+	}
+	return MACRO_NONE;
+}
+
+// LED control per layer
+// purple -- (0x7A,  0x00, 0xFF);
+uint32_t layer_state_set_user(uint32_t state) {
+    switch (biton32(state)) {
+    case 0:
+        // Off
+        rgblight_setrgb (0x00,  0x00, 0x00);
+        //rgblight_sethsv_at(360, 255, 255, 0);
+        break;
+    case 1:
+        // Blue
+        rgblight_setrgb (0x00,  0x00, 0xFF);
+        //rgblight_sethsv_at(140, 255, 255, 1);
+        break;
+    case 2:
+        // Red
+        rgblight_setrgb (0xFF,  0x00, 0x00);
+        //rgblight_sethsv_at(140, 125, 125, 1);
+        break;
+    case 3:
+        // Green
+        rgblight_setrgb (0x00,  0xFF, 0x00);
+        break;
+    default: //  Else, default(PowerShell), any other layer not specified
+        // Off
+        rgblight_setrgb (0x00,  0x00, 0x00);
+        break;
+    }
+  return state;
+}

keyboards/kumo/keymaps/LEdiodes/readme.md

@@ -0,0 +1,9 @@
+![Kumo:LEdiodes Layout Image](https://i.imgur.com/uDB1rTr.png)
+
+# LEdiodes Minivan Kumo layout
+
+This is the LEdiodes layout that uses the normal + arrow layout for MiniVan Kumo.
+
+LEdiodes = Light Emitting Diodes = LEDs
+
+This layout uses LEDs to show what layer you are on.

keyboards/kumo/keymaps/LEdiodes/rules.mk

@@ -0,0 +1,70 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#BOOTLOADER= qmk-dfu
+
+# was
+# OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Build Options
+#   comment out to disable the options.
+#
+CONSOLE_ENABLE    = no # Console for debug(+400)
+COMMAND_ENABLE    = no  # Commands for debug and configuration
+UNICODE_ENABLE    = no  # added on 08-18-2018 12:21 PM CST
+COMMAND_ENABLE    = no  # required for space cadet, when shift is also (.
+MIDI_ENABLE       = no  # MIDI controls
+AUDIO_ENABLE      = no  # Audio
+UNICODE_ENABLE    = no  # Unicode
+BLUETOOTH_ENABLE  = no  # Enable Bluetooth with the Adafruit EZ-Key HID
+SLEEP_LED_ENABLE  = no
+BOOTMAGIC_ENABLE  = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE   = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE   = yes	# Audio cones	# Audio control and System control(+450)
+NKRO_ENABLE       = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE   = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE  = yes # Enable keyboard backlight functionality (+1150)
+TAP_DANCE_ENABLE  = yes #
+AUTO_SHIFT_ENABLE = yes  # Enables autoshift