Cradio keyboard

keyboards/cradio/config.h

@@ -0,0 +1,83 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xC88B
+#define PRODUCT_ID      0x3988
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    DPB
+#define PRODUCT         Cradio
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *                  NO_DIODE = switches are directly connected to AVR pins
+ *
+*/
+#define DIRECT_PINS { \
+    { E6, F7, F6, F5, F4 }, \
+    { B1, B3, B2, B6, D3 }, \
+    { D1, D0, D4, C6, D7 }, \
+    { B4, B5, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+#define DIRECT_PINS_RIGHT { \
+    { F4, F5, F6, F7, E6 }, \
+    { D3, B6, B2, B3, B1 }, \
+    { D7, C6, D4, D0, D1 }, \
+    { B5, B4, NO_PIN, NO_PIN, NO_PIN } \
+}
+
+#define UNUSED_PINS
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Serial settings */
+#define USE_SERIAL
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
+/* Split handedness */
+#define EE_HANDS
+
+/* Top left key on left half */
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 0
+/* Top right key on right half */
+#define BOOTMAGIC_LITE_ROW_RIGHT 4
+#define BOOTMAGIC_LITE_COLUMN_RIGHT 4

keyboards/cradio/cradio.c

@@ -0,0 +1,20 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "cradio.h"

keyboards/cradio/cradio.h

@@ -0,0 +1,50 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+
+// readability
+#define ___ KC_NO
+
+#define LAYOUT( \
+        L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, \
+        L06, L07, L08, L09, L10, R06, R07, R08, R09, R10, \
+        L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, \
+                       L16, L17, R16, R17                 \
+    ) \
+    { \
+        { L01, L02, L03, L04, L05 }, \
+        { L06, L07, L08, L09, L10 }, \
+        { L11, L12, L13, L14, L15 }, \
+        { L16, L17, ___, ___, ___ }, \
+        { R01, R02, R03, R04, R05 }, \
+        { R06, R07, R08, R09, R10 }, \
+        { R11, R12, R13, R14, R15 }, \
+        { R16, R17, ___, ___, ___ }  \
+    }
+

keyboards/cradio/info.json

@@ -0,0 +1,52 @@
+{
+    "keyboard_name": "Cradio",
+    "url": "https://github.com/davidphilipbarr/Sweep",
+    "maintainer": "@davidphilipbarr",
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 0, "y": 0.93},
+                {"x": 1, "y": 0.31},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0.28},
+                {"x": 4, "y": 0.42},
+
+                {"x": 7, "y": 0.42},
+                {"x": 8, "y": 0.28},
+                {"x": 9, "y": 0},
+                {"x": 10, "y": 0.31},
+                {"x": 11, "y": 0.93},
+
+                {"x": 0, "y": 1.93},
+                {"x": 1, "y": 1.31},
+                {"x": 2, "y": 1},
+                {"x": 3, "y": 1.28},
+                {"x": 4, "y": 1.42},
+
+                {"x": 7, "y": 1.42},
+                {"x": 8, "y": 1.28},
+                {"x": 9, "y": 1},
+                {"x": 10, "y": 1.31},
+                {"x": 11, "y": 1.93},
+
+                {"x": 0, "y": 2.93},
+                {"x": 1, "y": 2.31},
+                {"x": 2, "y": 2},
+                {"x": 3, "y": 2.28},
+                {"x": 4, "y": 2.42},
+
+                {"x": 7, "y": 2.42},
+                {"x": 8, "y": 2.28},
+                {"x": 9, "y": 2},
+                {"x": 10, "y": 2.31},
+                {"x": 11, "y": 2.93},
+
+                {"x": 3.5, "y": 3.75},
+                {"x": 4.5, "y": 4},
+
+                {"x": 6.5, "y": 4},
+                {"x": 7.5, "y": 3.75}
+            ]
+        }
+    }
+}

keyboards/cradio/keymaps/default/keymap.c

@@ -0,0 +1,51 @@
+/* Copyright 2018-2021
+ * ENDO Katsuhiro <ka2hiro@curlybracket.co.jp>
+ * David Philip Barr <@davidphilipbarr>
+ * Pierre Chevalier <pierrechevalier83@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+/* Base layer 0 layout uses home row mods. See the following guide for details:
+ * https://precondition.github.io/home-row-mods
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT( \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, \
+    SFT_T(KC_A),ALT_T(KC_S),CTL_T(KC_D),GUI_T(KC_F), KC_G,    KC_H, GUI_T(KC_J),CTL_T(KC_K),ALT_T(KC_L),SFT_T(KC_SCLN), \
+    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, \
+                          LT(2,KC_TAB), KC_ENT,      KC_SPC,  LT(1,KC_BSPC) \
+    ),
+    [1] = LAYOUT( \
+    _______, KC_1,    KC_2,    KC_3,    KC_VOLU,     KC_HOME, KC_PGDN, KC_PGUP, KC_END,  KC_DQUO, \
+    _______, KC_4,    KC_5,    KC_6,    KC_VOLD,     KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_QUOT, \
+    KC_CAPS, KC_7,    KC_8,    KC_9,    KC_0,        _______, _______, _______, _______, _______, \
+                               MO(3),   KC_GESC,     _______, _______ \
+    ),
+    [2] = LAYOUT( \
+    _______, KC_LBRC, KC_LCBR, KC_RCBR, _______,     KC_CIRC, KC_LPRN, KC_RPRN, KC_RBRC, KC_TILD, \
+    KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,     KC_AMPR, KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,  \
+    _______, _______, _______, _______, _______,     KC_ASTR, KC_UNDS, KC_PLUS, KC_PIPE, _______, \
+                               _______, _______,     KC_DEL,  MO(3) \
+    ),
+    [3] = LAYOUT( \
+    _______, KC_F1,   KC_F2,   KC_F3,   KC_F10,      _______, KC_WH_U, KC_WH_D, _______, RESET,   \
+    _______, KC_F4,   KC_F5,   KC_F6,   KC_F11,      KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_INS,  \
+    _______, KC_F7,   KC_F8,   KC_F9,   KC_F12,      _______, KC_BTN1, KC_BTN2, _______, _______, \
+                               _______, _______,     _______, _______ \
+    )
+};

keyboards/cradio/readme.md

@@ -0,0 +1,33 @@
+# Cradio keyboards
+
+![Cradio](https://github.com/davidphilipbarr/hypergolic/raw/main/hypergarlic/ht.png)
+
+Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring.
+
+## Keyboard Info
+
+* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
+* Hardware Supported:
+    * [Sweep](https://github.com/davidphilipbarr/Sweep)
+    * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
+    * Variants of the same 34-key direct pin PCB
+* Hardware Availability: PCBs can be printed with gerber files from the repository
+
+Make examples for this keyboard (after setting up your build environment):
+
+    make cradio:default
+
+Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following:
+
+    make cradio:default:dfu-split-left
+    make cradio:default:dfu-split-right
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the top left key on the left side (or the top right right key on the right side) and plug in the controller on that half. 
+* **Physical reset button**: Briefly press the reset button soldered on the PCB.
+* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.

keyboards/cradio/rules.mk

@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+UNICODE_ENABLE = yes        # Unicode
+AUDIO_ENABLE = no           # Audio output
+SPLIT_KEYBOARD = yes        # Use shared split_common code