Add new keyboard Mammoth20x

keyboards/wuque/mammoth20x/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2021 wuquestudio
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xB06B
+#define PRODUCT_ID      0x0005
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    wuque studio
+#define PRODUCT         mammoth20x
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+#define MATRIX_ROW_PINS { D5, F0, F1, F4, F5, F6 }
+#define MATRIX_COL_PINS { B0, B1, E6, F7 }
+
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Enable encoder */
+#define ENCODERS_PAD_A { D3 }
+#define ENCODERS_PAD_B { D2 }
+
+#define ENCODERS 1
+// Note:  array is { col, row )
+#define ENCODERS_CW_KEY  { { 3, 2 } }
+#define ENCODERS_CCW_KEY { { 3, 4 } }

keyboards/wuque/mammoth20x/info.json

@@ -0,0 +1,41 @@
+{
+    "keyboard_name": "mammoth20x",
+    "url": "https://shop.wuquestudio.com/",
+    "maintainer": "spbgzh",
+    "width": 4,
+    "height": 6,
+    "layouts": {
+        "LAYOUT_default": {
+            "layout": [
+                { "label": "Esc", "x": 0, "y": 0 },
+                { "label": "Pause", "x": 1, "y": 0 },
+                { "label": "Delete", "x": 2, "y": 0 },
+                { "label": "E", "x": 3.5, "y": 0 },
+
+                { "label": "Num", "x": 0, "y": 1 },
+                { "label": "/", "x": 1, "y": 1 },
+                { "label": "*", "x": 2, "y": 1 },
+                { "label": "-", "x": 3, "y": 1 },
+
+                { "label": "7", "x": 0, "y": 2 },
+                { "label": "8", "x": 1, "y": 2 },
+                { "label": "9", "x": 2, "y": 2 },
+                { "label": "LeftEncode", "x": 3, "y": 0, "w": 0.5 },
+
+                { "label": "4", "x": 0, "y": 3 },
+                { "label": "5", "x": 1, "y": 3 },
+                { "label": "6", "x": 2, "y": 3 },
+                { "label": "+", "x": 3, "y": 2, "h": 2 },
+
+                { "label": "1", "x": 0, "y": 4 },
+                { "label": "2", "x": 1, "y": 4 },
+                { "label": "3", "x": 2, "y": 4 },
+                { "label": "RightEncode", "x": 4.5, "y": 0, "w" : 0.25 },
+
+                { "label": "0", "x": 0, "y": 5, "w": 2 },
+                { "label": ".", "x": 2, "y": 5 },
+                { "label": "Enter", "x": 3, "y": 4,"h":2 }
+            ]
+        }
+    }
+}

keyboards/wuque/mammoth20x/keymaps/default/keymap.c

@@ -0,0 +1,36 @@
+/* Copyright 2021 wuquestudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_default(
+        KC_ESC,  KC_PAUS, KC_DEL,  KC_MUTE,
+        KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_VOLU,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_VOLD,
+        KC_P0,            KC_PDOT, KC_PENT
+    ),
+    [1] = LAYOUT_default(
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______,          _______, _______
+    ),
+};

keyboards/wuque/mammoth20x/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for mammoth20x

keyboards/wuque/mammoth20x/keymaps/via/keymap.c

@@ -0,0 +1,52 @@
+/* Copyright 2021 wuquestudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_default(
+        KC_ESC,  KC_PAUS, KC_DEL,  KC_MUTE,
+        KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_VOLU,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_VOLD,
+        KC_P0,            KC_PDOT, KC_PENT
+    ),
+    [1] = LAYOUT_default(
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______,          _______, _______
+    ),
+    [2] = LAYOUT_default(
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______,          _______, _______
+    ),
+    [3] = LAYOUT_default(
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______, _______, _______, _______,
+        _______,          _______, _______
+    ),
+};

keyboards/wuque/mammoth20x/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The via keymap for mammoth20x

keyboards/wuque/mammoth20x/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/wuque/mammoth20x/mammoth20x.c

@@ -0,0 +1,59 @@
+/* Copyright 2021 wuquestudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "mammoth20x.h"
+
+
+static uint8_t encoder_state[ENCODERS] = {0};
+static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY;
+static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY;
+
+void encoder_action_unregister(void)
+{
+    for (int index = 0; index < ENCODERS; ++index)
+    {
+        if (encoder_state[index])
+        {
+            keyevent_t encoder_event = (keyevent_t){
+                .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index],
+                .pressed = false,
+                .time = (timer_read() | 1)};
+            encoder_state[index] = 0;
+            action_exec(encoder_event);
+        }
+    }
+}
+void encoder_action_register(uint8_t index, bool clockwise)
+{
+    keyevent_t encoder_event = (keyevent_t){
+        .key = clockwise ? encoder_cw[index] : encoder_ccw[index],
+        .pressed = true,
+        .time = (timer_read() | 1)};
+    encoder_state[index] = (clockwise ^ 1) | (clockwise << 1);
+    action_exec(encoder_event);
+}
+
+void matrix_scan_kb(void)
+{
+    encoder_action_unregister();
+    matrix_scan_user();
+}
+
+bool encoder_update_kb(uint8_t index, bool clockwise)
+{
+    encoder_action_register(index, clockwise);
+    return true;
+};

keyboards/wuque/mammoth20x/mammoth20x.h

@@ -0,0 +1,36 @@
+/* Copyright 2021 wuquestudio
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_default( \
+    K00, K01, K02, K03, \
+    K10, K11, K12, K13, \
+    K20, K21, K22, K23, \
+    K30, K31, K32, K33, \
+    K40, K41, K42, K43, \
+    K50,      K52, K53  \
+) { \
+    { K00,   K01,   K02,   K03   }, \
+    { K10,   K11,   K12,   K13   }, \
+    { K20,   K21,   K22,   K23   }, \
+    { K30,   K31,   K32,   K33   }, \
+    { K40,   K41,   K42,   K43   }, \
+    { K50,   KC_NO, K52,   K53   }, \
+}
+

keyboards/wuque/mammoth20x/readme.md

@@ -0,0 +1,22 @@
+# mammoth20x
+​
+More Info at[wuquestudio](https://shop.wuquestudio.com/).
+​
+* Keyboard Maintainer: [spbgzh](https://github.com/spbgzh)
+* Hardware Supported: mammoth20x Standard
+* Hardware Availability: [mammoth20x](https://shop.wuquestudio.com/)
+​
+Make example for this keyboard (after setting up your build environment):
+
+    make wuque/mammoth20x:default
+
+Flashing example for this keyboard:
+
+    make wuque/mammoth20x:default:flash
+
+To reset the board into bootloader mode, do one of the following:
+
+* Tap the Reset switch mounted on the PCB
+* Hold the Esc key while connecting the USB cable (also erases persistent settings)
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/wuque/mammoth20x/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes		# Enable Encoder
+