qmk · noroadsleft · Mar 6, 2021 · Mar 6, 2021 · Mar 6, 2021 · Mar 6, 2021
diff --git a/keyboards/bm68rgb/bm68rgb.c b/keyboards/bm68rgb/bm68rgb.c
@@ -0,0 +1,59 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bm68rgb.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Key Matrix to LED Index
+    { 0,      1,      2,      3,      4,      5,      6,      7,      8,      9,      10,     11,     12,     13,     14 },
+    { 15,     16,     17,     18,     19,     20,     21,     22,     23,     24,     25,     26,     27,     28,     29 },
+    { 30,     NO_LED, 31,     32,     33,     34,     35,     36,     37,     38,     39,     40,     41,     42,     43 },
+    { NO_LED, 44,     45,     46,     47,     48,     49,     50,     51,     52,     53,     54,     55,     56,     57 },
+    { 58,     59,     60,     NO_LED, NO_LED, NO_LED, 61,     NO_LED, NO_LED, 62,     63,     64,     65,     66,     67 }
+}, {
+    // LED Index to Physical Position
+    //I have no idea how to calculate this based on a templete, nor do have a good enough ruler to measure this.
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete
+    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 }, { 225,   0 },
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home
+    {   4,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 }, { 225,  16 },
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up
+    {  6,  32 },                {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 201,  32 }, { 225,  32 },
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down
+                   {  9,  48 }, {  34,  48 }, {  49,  48 }, {  64,  48 }, {  79,  48 }, {  94,  48 }, { 109,  48 }, { 124,  48 }, { 139,  48 }, { 154,  48 }, { 169,  48 }, { 189,  48 }, { 210,  48 }, { 225,  48 },
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right
+    {   2,  64 }, {  21,  64 }, {  39,  64 },                                { 94,  64 },                                         { 148,  64 }, { 163,  64 }, { 178,  64 }, { 193,  64 }, { 208,  64 }, { 225,  64 },
+    // UNDERGLOW
+    {   185, 45 }, {  160,  45 }, {  125, 45 }, { 95,  45 }, { 60,  45 }, { 25,  45 }
+}, {
+    // LED Index to Flag
+    //need to recheck what should be a modifier
+
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4,
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4,
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right
+    1, 1, 1, 4, 1, 1, 1, 4, 4, 4,
+    // UNDERGLOW
+    2, 2, 2, 2, 2, 2
+} };
+#endif
diff --git a/keyboards/bm68rgb/bm68rgb.h b/keyboards/bm68rgb/bm68rgb.h
@@ -0,0 +1,41 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D,  k0E,\
+    k10,  k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E,\
+    k20,   k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,   k2D,   k2E,\
+    k31,    k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,    k3C, k3D, k3E,\
+    k40,  k41,  k42,             k46,             k49, k4A, k4B, k4C, k4D, k4E\
+) { \
+    { k00,   k01,   k02,   k03,   k04,   k05,   k06,   k07,   k08,   k09,   k0A,   k0B,   k0C,   k0D,  k0E   }, \
+    { k10,   k11,   k12,   k13,   k14,   k15,   k16,   k17,   k18,   k19,   k1A,   k1B,   k1C,   k1D,  k1E   }, \
+    { k20,   KC_NO, k22,   k23,   k24,   k25,   k26,   k27,   k28,   k29,   k2A,   k2B,   k2C,   k2D,  k2E   }, \
+    { KC_NO, k31,   k32,   k33,   k34,   k35,   k36,   k37,   k38,   k39,   k3A,   k3B,   k3C,   k3D,  k3E   }, \
+    { k40,   k41,   k42,   KC_NO, KC_NO, KC_NO, k46,   KC_NO, KC_NO, k49,   k4A,   k4B,   k4C,   k4D,  k4E   }, \
+}
diff --git a/keyboards/bm68rgb/config.h b/keyboards/bm68rgb/config.h
@@ -0,0 +1,159 @@
+/*
+Copyright 2021 peepeetee
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x4B50 //KP
+#define PRODUCT_ID   0xEF6F
+#define DEVICE_VER   0x0001
+#define MANUFACTURER KPRepublic
+#define PRODUCT      bm68rgb
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, \
+                          B1, \
+                          B2, \
+                          B3, \
+                          E6 }
+#define MATRIX_COL_PINS {     D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define LED_NUM_LOCK_PIN B0
+//#define LED_CAPS_LOCK_PIN B1
+//#define LED_SCROLL_LOCK_PIN B2
+//#define LED_COMPOSE_PIN B3
+//#define LED_KANA_PIN B4
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN E2
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 74
+#ifdef RGB_DI_PIN
+#define RGBLED_NUM 74
+//#    define RGBLIGHT_HUE_STEP 8
+//#    define RGBLIGHT_SAT_STEP 8
+//#    define RGBLIGHT_VAL_STEP 8
+//#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+//#    define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+//#    define RGBLIGHT_EFFECT_BREATHING
+//#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#    define RGBLIGHT_EFFECT_SNAKE
+//#    define RGBLIGHT_EFFECT_KNIGHT
+//#    define RGBLIGHT_EFFECT_CHRISTMAS
+//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//#    define RGBLIGHT_EFFECT_RGB_TEST
+//#    define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/bm68rgb/info.json b/keyboards/bm68rgb/info.json
@@ -0,0 +1,82 @@
+{
+    "keyboard_name": "bm68rgb",
+    "url": "",
+    "maintainer": "peepeetee",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (B0,D0)", "x":0, "y":0},
+                {"label":"K01 (B0,D1)", "x":1, "y":0},
+                {"label":"K02 (B0,D2)", "x":2, "y":0},
+                {"label":"K03 (B0,D3)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,D4)", "x":5, "y":0},
+                {"label":"K06 (B0,D6)", "x":6, "y":0},
+                {"label":"K07 (B0,D7)", "x":7, "y":0},
+                {"label":"K08 (B0,B4)", "x":8, "y":0},
+                {"label":"K09 (B0,B5)", "x":9, "y":0},
+                {"label":"K0A (B0,B6)", "x":10, "y":0},
+                {"label":"K0B (B0,C6)", "x":11, "y":0},
+                {"label":"K0C (B0,C7)", "x":12, "y":0},
+                {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2},
+                {"label":"K0E (B0,F6)", "x":15, "y":0},
+                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
+                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
+                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
+                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
+                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
+                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
+                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
+                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (B1,B5)", "x":9.5, "y":1},
+                {"label":"K1A (B1,B6)", "x":10.5, "y":1},
+                {"label":"K1B (B1,C6)", "x":11.5, "y":1},
+                {"label":"K1C (B1,C7)", "x":12.5, "y":1},
+                {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1E (B1,F6)", "x":15, "y":1},
+                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
+                {"label":"K22 (B2,D2)", "x":1.75, "y":2},
+                {"label":"K23 (B2,D3)", "x":2.75, "y":2},
+                {"label":"K24 (B2,D5)", "x":3.75, "y":2},
+                {"label":"K25 (B2,D4)", "x":4.75, "y":2},
+                {"label":"K26 (B2,D6)", "x":5.75, "y":2},
+                {"label":"K27 (B2,D7)", "x":6.75, "y":2},
+                {"label":"K28 (B2,B4)", "x":7.75, "y":2},
+                {"label":"K29 (B2,B5)", "x":8.75, "y":2},
+                {"label":"K2A (B2,B6)", "x":9.75, "y":2},
+                {"label":"K2B (B2,C6)", "x":10.75, "y":2},
+                {"label":"K2C (B2,C7)", "x":11.75, "y":2},
+                {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K2E (B2,F6)", "x":15, "y":2},
+                {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
+                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
+                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
+                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
+                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
+                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
+                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
+                {"label":"K39 (B3,B5)", "x":9.25, "y":3},
+                {"label":"K3A (B3,B6)", "x":10.25, "y":3},
+                {"label":"K3B (B3,C6)", "x":11.25, "y":3},
+                {"label":"K3C (B3,C7)", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D (B3,F7)", "x":14, "y":3},
+                {"label":"K3E (B3,F6)", "x":15, "y":3},
+                {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K49 (E6,B5)", "x":10, "y":4},
+                {"label":"K4A (E6,B6)", "x":11, "y":4},
+                {"label":"K4B (E6,C6)", "x":12, "y":4},
+                {"label":"K4C (E6,C7)", "x":13, "y":4},
+                {"label":"K4D (E6,F7)", "x":14, "y":4},
+                {"label":"K4E (E6,F6)", "x":15, "y":4}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}
diff --git a/keyboards/bm68rgb/keymaps/default/keymap.c b/keyboards/bm68rgb/keymaps/default/keymap.c
@@ -0,0 +1,41 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN
+};
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_BASE] = LAYOUT(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,          KC_DEL,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,      KC_HOME,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,              KC_PGUP,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_LSFT,        KC_UP, KC_PGDN,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN] = LAYOUT(
+        KC_GRAVE,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,     _______,    _______,
+        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,   _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,     _______,      _______,
+        _______,            _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______,     _______, _______,
+        _______,   _______,   _______,                      _______,                           _______, _______, _______, _______, _______, _______
+    ),
+
+};
diff --git a/keyboards/bm68rgb/keymaps/default/readme.md b/keyboards/bm68rgb/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for bm68rgb