Residual deformation

Simple GUI to analyze residual deformations from experiments. This is an old project which I used to create GUI by using tkinter.

To Anička

• install anaconda or miniconda with python
• download zip of this repo (or use git as described bellow)
• unzip
• open cmd in the folder residual_deformations
• run python residual_deformations.py
• GUI should appear -> follow Steps to analyze image bellow

How to run the program

• git clone https://github.com/olisicky/residual_deformation.git
• Optional: create new virtual environment
• Install packages pip install -r requirements.txt
• python residual_deformations.py

Experiments

Experiments are performed at Faculty of Mechanical Engineering, Institute of solid mechanics, mechatronics and biomechanis.

• experiment is described as an appendix in my thesis TODO

Steps to analyze image

• Upload image - find the image which should be analyzed
• Select if the image is from Basler camera and setup or do calibration
• Select boundary
  • You should click and drag around the region of interest
  • Press ESC or ENTER
• Left click some points on the outer boundary of the segment
  • points should start and end on the edges to have a whole segment
• Press a
• Left click some points on the inner boundary
  • points should start and end on the edges to have a whole segment
• select number of points and press OK
• Select if the segment is cutted or full ring
• Press Draw results
  • image of with boundaries should appear
  • results are showed and saved with the same name as is the filename
• Once the segment is analysed the window needs to be closed (file -> exit) and the process needs be unfortunatelly repeated for new sample