microsoft · v-zbsail · Feb 7, 2020
diff --git a/src/vstest.console/Resources/xlf/Resources.cs.xlf b/src/vstest.console/Resources/xlf/Resources.cs.xlf
@@ -588,7 +588,7 @@
       </trans-unit>
       <trans-unit id="SwitchToNoIsolation">
         <source>Using Isolation mode to run the tests as diagnostic data adapters were enabled in the runsettings. Use the /inIsolation parameter to suppress this warning.</source>
-        <target state="translated">Ke spouštění testů se používá režim izolace, protože v parametrech spouštění se povolily adaptéry diagnostických dat. Pokud chcete toto upozornění potlačit, použijte parametr /InIsolation.</target>
+        <target state="translated">Ke spouštění testů se používá režim izolace, protože v nastavení Runsettings se povolily adaptéry diagnostických dat. Pokud chcete toto upozornění potlačit, použijte parametr /InIsolation.</target>
         <note />
         <alt-trans match-quality="100%" tool="BlackBox/MSR MT">
           <target state-qualifier="mt-suggestion">Unter Verwendung des Isolationsmodus zum Ausführen der Tests als Adapter für diagnostische Daten in die Runsettings aktiviert wurden. Verwenden Sie den Parameter /inIsolation Sie diese Warnung unterdrücken.</target>
@@ -1419,7 +1419,7 @@
       </trans-unit>
       <trans-unit id="MalformedRunSettingsKey">
         <source>One or more runsettings provided contain invalid token</source>
-        <target state="translated">Nejméně jeden z parametrů spouštění obsahuje neplatný token.</target>
+        <target state="translated">Nejméně jedno z nastavení Runsettings obsahuje neplatný token.</target>
         <note />
       </trans-unit>
       <trans-unit id="ResultsDirectoryArgumentHelp">
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">Argument parametru testovacího běhu {0} není platný. Použijte prosím formát uvedený níže.
+     Formát: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.de.xlf b/src/vstest.console/Resources/xlf/Resources.de.xlf
@@ -1419,7 +1419,7 @@
       </trans-unit>
       <trans-unit id="MalformedRunSettingsKey">
         <source>One or more runsettings provided contain invalid token</source>
-        <target state="translated">Mindestens eine angegebene Ausführungseinstellung enthält ein ungültiges Token.</target>
+        <target state="translated">Mindestens eine angegebene RUNSETTINGS-Datei enthält ein ungültiges Token.</target>
         <note />
       </trans-unit>
       <trans-unit id="ResultsDirectoryArgumentHelp">
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">Das Parameterargument "{0}" für den Testlauf ist ungültig. Verwenden Sie das nachstehende Format.
+     Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.es.xlf b/src/vstest.console/Resources/xlf/Resources.es.xlf
@@ -1662,8 +1662,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">El argumento del parámetro de la serie de pruebas "{0}" no es válido. Use el formato siguiente.
+     Formato: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.fr.xlf b/src/vstest.console/Resources/xlf/Resources.fr.xlf
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">L'argument de paramètre de série de tests '{0}' n'est pas valide. Utilisez le format ci-dessous.
+     Format : TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.it.xlf b/src/vstest.console/Resources/xlf/Resources.it.xlf
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">L'argomento '{0}' del parametro di esecuzione dei test non è valido. Usare il formato seguente.
+     Formato: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.ja.xlf b/src/vstest.console/Resources/xlf/Resources.ja.xlf
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">テストの実行パラメーターの引数 '{0}' が無効です。以下の形式を使用してください。
+     形式: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.ko.xlf b/src/vstest.console/Resources/xlf/Resources.ko.xlf
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">테스트 실행 매개 변수 인수 '{0}'이(가) 잘못되었습니다. 아래 형식을 사용하세요.
+     형식: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.pl.xlf b/src/vstest.console/Resources/xlf/Resources.pl.xlf
@@ -588,7 +588,7 @@
       </trans-unit>
       <trans-unit id="SwitchToNoIsolation">
         <source>Using Isolation mode to run the tests as diagnostic data adapters were enabled in the runsettings. Use the /inIsolation parameter to suppress this warning.</source>
-        <target state="translated">Używanie trybu izolacji do uruchomienia testów jako adapterów danych diagnostycznych zostało włączone w parametrach uruchomieniowych. Użyj parametru /inIsolation, aby pominąć to ostrzeżenie.</target>
+        <target state="translated">Używanie trybu izolacji do uruchomienia testów jako adapterów danych diagnostycznych zostało włączone w pliku runsettings. Użyj parametru /inIsolation, aby pominąć to ostrzeżenie.</target>
         <note />
         <alt-trans match-quality="100%" tool="BlackBox/MSR MT">
           <target state-qualifier="mt-suggestion">Unter Verwendung des Isolationsmodus zum Ausführen der Tests als Adapter für diagnostische Daten in die Runsettings aktiviert wurden. Verwenden Sie den Parameter /inIsolation Sie diese Warnung unterdrücken.</target>
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">Argument parametru przebiegu testu „{0}” jest nieprawidłowy. Użyj poniższego formatu.
+     Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.pt-BR.xlf b/src/vstest.console/Resources/xlf/Resources.pt-BR.xlf
@@ -1659,8 +1659,8 @@ Altere o prefixo de nível de diagnóstico do agente de console, como mostrado a
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">O argumento do parâmetro de execução de teste '{0}' é inválido. Use o formato abaixo.
+     Formato: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.ru.xlf b/src/vstest.console/Resources/xlf/Resources.ru.xlf
@@ -588,7 +588,7 @@
       </trans-unit>
       <trans-unit id="SwitchToNoIsolation">
         <source>Using Isolation mode to run the tests as diagnostic data adapters were enabled in the runsettings. Use the /inIsolation parameter to suppress this warning.</source>
-        <target state="translated">Используется режим изоляции для запуска тестов, так как в параметрах запуска включены адаптеры диагностических данных. Используйте параметр /InIsolation, чтобы отключить это предупреждение.</target>
+        <target state="translated">Используется режим изоляции для запуска тестов, так как в файле параметров запуска RUNSETTINGS включены адаптеры диагностических данных. Используйте параметр /InIsolation, чтобы отключить это предупреждение.</target>
         <note />
         <alt-trans match-quality="100%" tool="BlackBox/MSR MT">
           <target state-qualifier="mt-suggestion">Unter Verwendung des Isolationsmodus zum Ausführen der Tests als Adapter für diagnostische Daten in die Runsettings aktiviert wurden. Verwenden Sie den Parameter /inIsolation Sie diese Warnung unterdrücken.</target>
@@ -1419,7 +1419,7 @@
       </trans-unit>
       <trans-unit id="MalformedRunSettingsKey">
         <source>One or more runsettings provided contain invalid token</source>
-        <target state="translated">Один параметр запуска (или несколько) включает в себя недопустимый токен.</target>
+        <target state="translated">Один или несколько файлов RUNSETTINGS включают в себя недопустимый токен.</target>
         <note />
       </trans-unit>
       <trans-unit id="ResultsDirectoryArgumentHelp">
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">Недопустимый аргумент "{0}" для параметра тестового запуска. Используйте указанный ниже формат.
+     Формат: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.tr.xlf b/src/vstest.console/Resources/xlf/Resources.tr.xlf
@@ -588,7 +588,7 @@
       </trans-unit>
       <trans-unit id="SwitchToNoIsolation">
         <source>Using Isolation mode to run the tests as diagnostic data adapters were enabled in the runsettings. Use the /inIsolation parameter to suppress this warning.</source>
-        <target state="translated">Çalıştırma ayarlarında tanılama veri bağdaştırıcıları etkinleştirildiğinden testleri çalıştırmak üzere Yalıtım modu kullanılıyor. Bu uyarıyı kapatmak için /inIsolation parametresini kullanın.</target>
+        <target state="translated">runsettings içinde tanılama veri bağdaştırıcıları etkinleştirildiğinden testleri çalıştırmak üzere Yalıtım modu kullanılıyor. Bu uyarıyı kapatmak için /inIsolation parametresini kullanın.</target>
         <note />
         <alt-trans match-quality="100%" tool="BlackBox/MSR MT">
           <target state-qualifier="mt-suggestion">Unter Verwendung des Isolationsmodus zum Ausführen der Tests als Adapter für diagnostische Daten in die Runsettings aktiviert wurden. Verwenden Sie den Parameter /inIsolation Sie diese Warnung unterdrücken.</target>
@@ -1659,8 +1659,8 @@ Günlükler için izleme düzeyini aşağıda gösterildiği gibi değiştirin
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">'{0}' test çalıştırması parametre bağımsız değişkeni geçersiz. Lütfen aşağıdaki biçimi kullanın.
+     Biçim: TestRunParameters.Parameter(name=\"&lt;ad&gt;\", value=\"&lt;değer&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.zh-Hans.xlf b/src/vstest.console/Resources/xlf/Resources.zh-Hans.xlf
@@ -1659,8 +1659,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">测试运行参数自变量“{0}”无效。请使用以下格式。
+     格式: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>

diff --git a/src/vstest.console/Resources/xlf/Resources.zh-Hant.xlf b/src/vstest.console/Resources/xlf/Resources.zh-Hant.xlf
@@ -264,7 +264,7 @@
       </trans-unit>
       <trans-unit id="HelpUsageText">
         <source>Usage: vstest.console.exe [Arguments] [Options] [[--] &lt;RunSettings arguments&gt;...]]</source>
-        <target state="translated">用法: vstest.console.exe [引數] [選項] [[--] &lt;執行設定引數&gt;...]]</target>
+        <target state="translated">用法: vstest.console.exe [引數] [選項] [[--] &lt;RunSettings 引數&gt;...]]</target>
         <note />
         <alt-trans match-quality="100%" tool="BlackBox/MSR MT">
           <target state-qualifier="mt-suggestion">Syntax: vstest.console.exe [Optionen] [Argumente]</target>
@@ -1660,8 +1660,8 @@
       <trans-unit id="InvalidTestRunParameterArgument">
         <source>The test run parameter argument '{0}' is invalid. Please use the format below.
      Format: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</source>
-        <target state="new">The test run parameter argument '{0}' is invalid. Please use the format below.
-Format : TestRunParameters.Parameter(name="&lt;name&gt;", value="&lt;value&gt;")</target>
+        <target state="translated">測試回合參數的引數 '{0}' 無效。請使用下面的格式。
+     格式: TestRunParameters.Parameter(name=\"&lt;name&gt;\", value=\"&lt;value&gt;\")</target>
         <note></note>
       </trans-unit>
     </body>