Merge pull request autowarefoundation#284 from tier4/sync-awf-latest

chore: sync awf-latest

autoware_launch/config/perception/object_recognition/prediction/map_based_prediction.param.yaml

@@ -16,6 +16,9 @@
     check_lateral_acceleration_constraints: false # whether to check if the predicted path complies with lateral acceleration constraints
     max_lateral_accel: 2.0 # [m/ss] max acceptable lateral acceleration for predicted vehicle paths
     min_acceleration_before_curve: -2.0 # [m/ss] min acceleration a vehicle might take to decelerate before a curve
+    use_vehicle_acceleration: false # whether to consider current vehicle acceleration when predicting paths or not
+    speed_limit_multiplier: 1.5 # When using vehicle acceleration. Set vehicle's maximum predicted speed as the legal speed limit in that lanelet times this value
+    acceleration_exponential_half_life: 2.5 # [s] When using vehicle acceleration. The decaying acceleration model considers that the current vehicle acceleration will be halved after this many seconds
     # parameter for shoulder lane prediction
     prediction_time_horizon_rate_for_validate_shoulder_lane_length: 0.8
 

autoware_launch/config/planning/scenario_planning/lane_driving/behavior_planning/behavior_velocity_planner/crosswalk.param.yaml

@@ -50,15 +50,15 @@
           min_jerk: -1.0 # min jerk [m/sss]
           max_jerk: 1.0 # max jerk [m/sss]
 
-        stop_object_velocity_threshold: 0.28 # [m/s] velocity threshold for the module to judge whether the objects is stopped (0.28 m/s = 1.0 kmph)
+        stop_object_velocity_threshold: 0.25 # [m/s] velocity threshold for the module to judge whether the objects is stopped (0.25 m/s = 0.9 kmph)
         min_object_velocity: 1.39 # [m/s] minimum object velocity (compare the estimated velocity by perception module with this parameter and adopt the larger one to calculate TTV. 1.39 m/s = 5.0 kmph)
         ## param for yielding
         disable_stop_for_yield_cancel: true # for the crosswalks with traffic signal
         disable_yield_for_new_stopped_object: true # for the crosswalks with traffic signal
         # If the pedestrian does not move for X seconds after the ego has stopped in front the crosswalk, the module judge that the pedestrian has no intention to walk and allows the ego to proceed.
         distance_map_for_no_intention_to_walk: [1.0, 5.0] # [m] ascending order
-        timeout_map_for_no_intention_to_walk: [3.0, 0.0] # [s]
-        timeout_ego_stop_for_yield: 3.0 # [s] If the ego maintains the stop for this amount of time, then the ego proceeds, assuming it has stopped long time enough.
+        timeout_map_for_no_intention_to_walk: [1.0, 0.0] # [s]
+        timeout_ego_stop_for_yield: 1.0 # [s] If the ego maintains the stop for this amount of time, then the ego proceeds, assuming it has stopped long time enough.
 
       # param for target object filtering
       object_filtering:

autoware_launch/config/planning/scenario_planning/lane_driving/behavior_planning/behavior_velocity_planner/walkway.param.yaml

@@ -1,5 +1,5 @@
 /**:
   ros__parameters:
     walkway:
-      stop_duration: 1.0 # [s] stop time at stop position
+      stop_duration: 0.1 # [s] stop time at stop position
       stop_distance_from_crosswalk: 3.5 # [m] make stop line away from crosswalk when no explicit stop line exists

autoware_launch/config/planning/scenario_planning/lane_driving/motion_planning/obstacle_cruise_planner/obstacle_cruise_planner.param.yaml

@@ -85,15 +85,15 @@
         obstacle_traj_angle_threshold : 1.22 # [rad] = 70 [deg], yaw threshold of crossing obstacle against the nearest trajectory point for cruise or stop
 
       stop:
-        max_lat_margin: 0.0 # lateral margin between obstacle and trajectory band with ego's width
+        max_lat_margin: 0.2 # lateral margin between obstacle and trajectory band with ego's width
         crossing_obstacle:
           collision_time_margin : 4.0 # time threshold of collision between obstacle adn ego for cruise or stop [s]
 
       cruise:
         max_lat_margin: 1.0 # lateral margin between obstacle and trajectory band with ego's width
         outside_obstacle:
-          obstacle_velocity_threshold : 3.0 # minimum velocity threshold of obstacles outside the trajectory to cruise or stop [m/s]
-          ego_obstacle_overlap_time_threshold : 1.0 #  time threshold to decide cut-in obstacle for cruise or stop [s]
+          obstacle_velocity_threshold : 3.5 # minimum velocity threshold of obstacles outside the trajectory to cruise or stop [m/s]
+          ego_obstacle_overlap_time_threshold : 2.0 #  time threshold to decide cut-in obstacle for cruise or stop [s]
           max_prediction_time_for_collision_check : 20.0 # prediction time to check collision between obstacle and ego
 
       slow_down:
@@ -187,7 +187,7 @@
         static:
           min_lat_margin: 0.2
           max_lat_margin: 1.0
-          min_ego_velocity: 2.0
+          min_ego_velocity: 4.0
           max_ego_velocity: 8.0
 
       moving_object_speed_threshold: 0.5 # [m/s] how fast the object needs to move to be considered as "moving"

autoware_launch/config/planning/scenario_planning/lane_driving/motion_planning/surround_obstacle_checker/surround_obstacle_checker.param.yaml

@@ -9,30 +9,30 @@
       surround_check_side_distance: 0.5
       surround_check_back_distance: 0.5
     unknown:
-      enable_check: true
+      enable_check: false
       surround_check_front_distance: 0.5
       surround_check_side_distance: 0.5
       surround_check_back_distance: 0.5
     car:
       enable_check: true
       surround_check_front_distance: 0.5
       surround_check_side_distance: 0.0
-      surround_check_back_distance: 0.5
+      surround_check_back_distance: 0.0
     truck:
       enable_check: true
       surround_check_front_distance: 0.5
       surround_check_side_distance: 0.0
-      surround_check_back_distance: 0.5
+      surround_check_back_distance: 0.0
     bus:
       enable_check: true
       surround_check_front_distance: 0.5
       surround_check_side_distance: 0.0
-      surround_check_back_distance: 0.5
+      surround_check_back_distance: 0.0
     trailer:
       enable_check: true
       surround_check_front_distance: 0.5
       surround_check_side_distance: 0.0
-      surround_check_back_distance: 0.5
+      surround_check_back_distance: 0.0
     motorcycle:
       enable_check: true
       surround_check_front_distance: 0.5
@@ -49,9 +49,9 @@
       surround_check_side_distance: 0.5
       surround_check_back_distance: 0.5
 
-    surround_check_hysteresis_distance: 0.3
+    surround_check_hysteresis_distance: 0.1
 
-    state_clear_time: 2.0
+    state_clear_time: 0.2
 
     # ego stop state
     stop_state_ego_speed: 0.1 #[m/s]

autoware_launch/launch/autoware.launch.xml

@@ -44,6 +44,8 @@
   <!-- Perception -->
   <arg name="perception_mode" default="lidar" description="select perception mode. camera_lidar_radar_fusion, camera_lidar_fusion, lidar_radar_fusion, lidar, radar"/>
   <arg name="traffic_light_recognition/enable_fine_detection" default="true" description="enable traffic light fine detection"/>
+  <!-- Auto mode setting-->
+  <arg name="enable_all_modules_auto_mode" default="false" description="enable all module's auto mode"/>
 
   <!-- Global parameters -->
   <group scoped="false">
@@ -103,6 +105,7 @@
   <group if="$(var launch_planning)">
     <include file="$(find-pkg-share autoware_launch)/launch/components/tier4_planning_component.launch.xml">
       <arg name="module_preset" value="$(var planning_module_preset)"/>
+      <arg name="enable_all_modules_auto_mode" value="$(var enable_all_modules_auto_mode)"/>
     </include>
   </group>
 

autoware_launch/launch/components/tier4_localization_component.launch.xml

@@ -4,15 +4,19 @@
   <arg name="pose_source" default="ndt" description="select pose_estimator: ndt, yabloc, eagleye"/>
   <arg name="twist_source" default="gyro_odom" description="select twist_estimator. gyro_odom, eagleye"/>
   <arg name="input_pointcloud" default="/sensing/lidar/top/pointcloud" description="The topic will be used in the localization util module"/>
+  <arg
+    name="lidar_container_name"
+    default="/sensing/lidar/top/pointcloud_preprocessor/pointcloud_container"
+    description="The target container to which lidar preprocessing nodes in localization be attached"
+  />
 
   <group>
     <include file="$(find-pkg-share tier4_localization_launch)/launch/localization.launch.xml">
-      <arg name="use_pointcloud_container" value="$(var use_pointcloud_container)"/>
-      <arg name="pointcloud_container_name" value="$(var pointcloud_container_name)"/>
       <arg name="pose_source" value="$(var pose_source)"/>
       <arg name="twist_source" value="$(var twist_source)"/>
       <arg name="system_run_mode" value="$(var system_run_mode)"/>
       <arg name="input_pointcloud" value="$(var input_pointcloud)"/>
+      <arg name="lidar_container_name" value="$(var lidar_container_name)"/>
 
       <!-- parameter paths for common -->
       <arg name="crop_box_filter_measurement_range_param_path" value="$(var loc_config_path)/crop_box_filter_measurement_range.param.yaml"/>

autoware_launch/launch/components/tier4_perception_component.launch.xml

@@ -13,7 +13,6 @@
   <include file="$(find-pkg-share tier4_perception_launch)/launch/perception.launch.xml">
     <arg name="mode" value="$(var perception_mode)"/>
     <arg name="vehicle_param_file" value="$(find-pkg-share $(var vehicle_model)_description)/config/vehicle_info.param.yaml"/>
-    <arg name="use_pointcloud_container" value="$(var use_pointcloud_container)"/>
     <arg name="pointcloud_container_name" value="$(var pointcloud_container_name)"/>
     <arg name="enable_fine_detection" value="$(var traffic_light_recognition/enable_fine_detection)"/>
     <arg name="occupancy_grid_map_method" value="$(var occupancy_grid_map_method)"/>

autoware_launch/launch/components/tier4_planning_component.launch.xml

@@ -2,12 +2,14 @@
 <launch>
   <!-- NOTE: optional parameters are written here -->
   <arg name="module_preset" default="default"/>
+  <arg name="enable_all_modules_auto_mode" default="false"/>
   <include file="$(find-pkg-share autoware_launch)/config/planning/preset/$(var module_preset)_preset.yaml"/>
 
   <include file="$(find-pkg-share tier4_planning_launch)/launch/planning.launch.xml">
     <arg name="vehicle_param_file" value="$(find-pkg-share $(var vehicle_model)_description)/config/vehicle_info.param.yaml"/>
     <arg name="use_pointcloud_container" value="$(var use_pointcloud_container)"/>
     <arg name="pointcloud_container_name" value="$(var pointcloud_container_name)"/>
+    <arg name="enable_all_modules_auto_mode" value="$(var enable_all_modules_auto_mode)"/>
 
     <!-- common -->
     <arg name="common_config_path" value="$(find-pkg-share autoware_launch)/config/planning/scenario_planning/common"/>

autoware_launch/launch/planning_simulator.launch.xml

@@ -30,6 +30,8 @@
   <let name="rviz_respawn" value="true" unless="$(var scenario_simulation)"/>
   <!-- Vcu emulation -->
   <arg name="vehicle_simulation" default="true" description="use vehicle simulation"/>
+  <!-- Auto mode setting-->
+  <arg name="enable_all_modules_auto_mode" default="$(var scenario_simulation)" description="enable all module's auto mode"/>
 
   <group scoped="false">
     <!-- Vehicle -->
@@ -63,6 +65,8 @@
       <arg name="rviz" value="$(var rviz)"/>
       <arg name="rviz_config" value="$(var rviz_config)"/>
       <arg name="rviz_respawn" value="$(var rviz_respawn)"/>
+      <!-- Auto mode setting-->
+      <arg name="enable_all_modules_auto_mode" value="$(var enable_all_modules_auto_mode)"/>
     </include>
   </group>