Skip to content

Commit

Permalink
Remove PC/SC ATR whitelist, instead scan for AIDs
Browse files Browse the repository at this point in the history 
Before, a whitelist of ATR codes (answer to reset, hardware-specific)
was used to scan for compatible (Yubi)Keys.
Now, every connected smartcard is scanned for AIDs (applet identifier),
which are known to implement the HMAC-SHA1 protocol.

This enables the support of currently unknown or unreleased hardware.
  • Loading branch information
@StarGate01
StarGate01 committed Sep 29, 2021
1 parent 250a737 commit fe49dd1
Show file tree
Hide file tree
Showing 2 changed files with 97 additions and 55 deletions.
109 changes: 73 additions & 36 deletions src/keys/drivers/YubiKeyInterfacePCSC.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -183,11 +183,9 @@ namespace
if ((rv = SCardBeginTransaction(handle)) == SCARD_S_SUCCESS) {
int i;
for (i = 4; i > 0; i--) { // 3 tries for reconnecting after reset
// Run the lambda payload and store its return code
int32_t rv_act = atomic_action();
if (rv_act == SCARD_S_SUCCESS) {
rv = SCARD_S_SUCCESS;
break;
} else if (rv_act == static_cast<int32_t>(SCARD_W_RESET_CARD)) {
if (rv_act == static_cast<int32_t>(SCARD_W_RESET_CARD)) {
// The card was reset during the transmission.
SCUINT dwProt_new = SCARD_PROTOCOL_UNDEFINED;
// Acknowledge the reset and reestablish the connection and handle
Expand All @@ -201,6 +199,9 @@ namespace
#endif
qDebug("Smardcard was reset and had to be reconnected");
} else {
// This does not mean that the payload returned SCARD_S_SUCCESS
// just that the card was not reset during communication.
// Return the return code of the payload function
rv = rv_act;
break;
}
Expand Down Expand Up @@ -243,20 +244,26 @@ namespace
if ((rv = getCardStatus(handle, dwProt, pioSendPci)) == SCARD_S_SUCCESS) {
// Write to and read from the card
// pioRecvPci is nullptr because we do not expect any PCI response header
if ((rv = SCardTransmit(handle, pioSendPci, pbSendBuffer, dwSendLength, nullptr, pbRecvBuffer, &dwRecvLength))
if ((rv = SCardTransmit(
handle, pioSendPci, pbSendBuffer, dwSendLength, nullptr, pbRecvBuffer, &dwRecvLength))
== SCARD_S_SUCCESS) {
if (dwRecvLength < 2) {
// Any valid response should be at least 2 bytes (response status)
// However the protocol itself could fail
rv = SCARD_E_FILE_NOT_FOUND;
rv = SCARD_E_UNEXPECTED;
} else {
if (pbRecvBuffer[dwRecvLength - 2] == SW_OK_HIGH || pbRecvBuffer[dwRecvLength - 1] == SW_OK_LOW) {
if (pbRecvBuffer[dwRecvLength - 2] == SW_OK_HIGH && pbRecvBuffer[dwRecvLength - 1] == SW_OK_LOW) {
rv = SCARD_S_SUCCESS;
} else if (pbRecvBuffer[dwRecvLength - 2] == SW_PRECOND_HIGH
|| pbRecvBuffer[dwRecvLength - 1] == SW_PRECOND_LOW) {
&& pbRecvBuffer[dwRecvLength - 1] == SW_PRECOND_LOW) {
// This happens if the key requires eg. a button press or if the applet times out
// Solution: Re-present the card to the reader
rv = SCARD_W_CARD_NOT_AUTHENTICATED;
} else if ((pbRecvBuffer[dwRecvLength - 2] == SW_NOTFOUND_HIGH
&& pbRecvBuffer[dwRecvLength - 1] == SW_NOTFOUND_LOW)
|| pbRecvBuffer[dwRecvLength - 2] == SW_UNSUP_HIGH) {
// This happens eg. during a select command when the AID is not found
rv = SCARD_E_FILE_NOT_FOUND;
} else {
rv = SCARD_E_UNEXPECTED;
}
Expand Down Expand Up @@ -292,6 +299,32 @@ namespace
return rv;
}

/***
* @brief Finds the AID a card uses by checking a list of AIDs
*
* @param handle Smartcard handle
* @param aid Application identifier byte string
* @param result Smartcard handle and AID bytestring pair that will be populated on success
*
* @return true on success
*/
bool findAID(SCARDHANDLE handle, const QList<QByteArray>& aid_codes, SCardAID& result)
{
for (const auto& aid : aid_codes) {
// Ensure the transmission is retransmitted after card resets
int32_t rv = transactRetry(handle, [&handle, &aid]() {
// Try to select the card using the specified AID
return selectApplet({handle, aid});
});
if (rv == SCARD_S_SUCCESS) {
result.first = handle;
result.second = aid;
return true;
}
}
return false;
}

/***
* @brief Reads the serial number of a key
*
Expand Down Expand Up @@ -330,14 +363,14 @@ namespace
*
* @param target_serial The serial number to search for
* @param context A pre-established smartcard API context
* @param atr_names A map which maps the card ATR to an applet select APDU bytestring and display name pair
* @param aid_codes A list which contains the AIDs to scan for
* @param handle The created smartcard handle and applet select bytestring pair
*
* @return SCARD_S_SUCCESS on success
*/
int32_t openKeySerial(const unsigned int target_serial,
SCARDCONTEXT& context,
const QHash<QByteArray, QPair<QByteArray, QString>>& atr_names,
const QList<QByteArray>& aid_codes,
SCardAID* handle)
{
// Ensure the Smartcard API handle is still valid
Expand Down Expand Up @@ -367,12 +400,11 @@ namespace
rv = SCardStatus(hCard, pbReader, &dwReaderLen, &dwState, &dwProt, pbAtr, &dwAtrLen);
if (rv == SCARD_S_SUCCESS) {
if (dwProt == SCARD_PROTOCOL_T0 || dwProt == SCARD_PROTOCOL_T1) {
// Lookup the ATR record in the applet selection map
QByteArray atr = QByteArray(reinterpret_cast<char*>(pbAtr), dwAtrLen);
if (atr_names.contains(atr)) {
// Find which AID to use
SCardAID satr;
if (findAID(hCard, aid_codes, satr)) {
unsigned int serial = 0;
SCardAID satr = {hCard, atr_names.value(atr).first};
// Check the serial number of the card by using an ADPU transfer
// Read the serial number of the card
getSerial(satr, serial);
if (serial == target_serial) {
handle->first = satr.first;
Expand Down Expand Up @@ -557,36 +589,41 @@ void YubiKeyInterfacePCSC::findValidKeys()
if (rv == SCARD_S_SUCCESS) {
// Check for a valid protocol
if (dwProt == SCARD_PROTOCOL_T0 || dwProt == SCARD_PROTOCOL_T1) {
QByteArray atr = QByteArray(reinterpret_cast<char*>(pbAtr), dwAtrLen);
if (m_atr_names.contains(atr)) {
// Build the UI name using the display name found in the ATR map,
// The firmware version and the serial number
QString name = m_atr_names.value(atr).second;
// Find which AID to use
SCardAID satr;
if (findAID(hCard, m_aid_codes, satr)) {
// Build the UI name using the display name found in the ATR map
QByteArray atr = QByteArray(reinterpret_cast<char*>(pbAtr), dwAtrLen);
QString name = "Unknown Key";
if (m_atr_names.contains(atr)) {
name = m_atr_names.value(atr);
}
// Add the firmware version and the serial number
uint8_t version[3] = {0};
SCardAID satr = {hCard, m_atr_names.value(atr).first};
getStatus(satr, version);
name += QString(" v%1.%2.%3")
.arg(QString::number(version[0]),
QString::number(version[1]),
QString::number(version[2]));
unsigned int serial = 0;
getSerial(satr, serial);

/* This variable indicates that the key is locked / timed out.
When using the key via NFC, the user has to re-present the key to clear the timeout.
Also, the key can be programmatically reset (see below).
When using the key via USB (where the Yubikey presents as a PCSC reader in itself),
the non-HMAC-SHA1 slots (eg. OTP) are incorrectly recognized as locked HMAC-SHA1 slots.
Due to this conundrum, we exclude "locked" keys from the key enumeration,
but only if the reader is the "virtual yubikey reader device".
This also has the nice side effect of de-duplicating interfaces when a key
Is connected via USB and also accessible via PCSC */
When using the key via NFC, the user has to re-present the key to clear the timeout.
Also, the key can be programmatically reset (see below).
When using the key via USB (where the Yubikey presents as a PCSC reader in itself),
the non-HMAC-SHA1 slots (eg. OTP) are incorrectly recognized as locked HMAC-SHA1 slots.
Due to this conundrum, we exclude "locked" keys from the key enumeration,
but only if the reader is the "virtual yubikey reader device".
This also has the nice side effect of de-duplicating interfaces when a key
Is connected via USB and also accessible via PCSC */
bool wouldBlock = false;
/* When the key is Used via NFC, the lock state / time-out is cleared when
The smartcard connection is re-established / the applet is selected
So the next call to performTestChallenge actually clears the lock.
Due to this, the key is unlocked and we display it as such.
When the key times out in the time between the key listing and
the database unlock /save, an intercation request will be displayed. */
The smartcard connection is re-established / the applet is selected
So the next call to performTestChallenge actually clears the lock.
Due to this, the key is unlocked and we display it as such.
When the key times out in the time between the key listing and
the database unlock /save, an intercation request will be displayed. */
QList<QPair<int, QString>> ykSlots;
for (int slot = 1; slot <= 2; ++slot) {
if (performTestChallenge(&satr, slot, &wouldBlock)) {
Expand Down Expand Up @@ -621,7 +658,7 @@ bool YubiKeyInterfacePCSC::testChallenge(YubiKeySlot slot, bool* wouldBlock)
{
bool ret = false;
SCardAID hCard;
int32_t rv = openKeySerial(slot.first, m_sc_context, m_atr_names, &hCard);
int32_t rv = openKeySerial(slot.first, m_sc_context, m_aid_codes, &hCard);

if (rv == SCARD_S_SUCCESS) {
ret = performTestChallenge(&hCard, slot.second, wouldBlock);
Expand Down Expand Up @@ -667,7 +704,7 @@ YubiKeyInterfacePCSC::challenge(YubiKeySlot slot, const QByteArray& challenge, B
SCardAID hCard;
int tries = 20; // 5 seconds, test every 250 ms
while (tries > 0) {
int32_t rv = openKeySerial(slot.first, m_sc_context, m_atr_names, &hCard);
int32_t rv = openKeySerial(slot.first, m_sc_context, m_aid_codes, &hCard);
// Key with specified serial number is found
if (rv == SCARD_S_SUCCESS) {
auto ret = performChallenge(&hCard, slot.second, true, challenge, response);
Expand Down
43 changes: 24 additions & 19 deletions src/keys/drivers/YubiKeyInterfacePCSC.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -34,6 +34,9 @@
#define SW_OK_LOW 0x00
#define SW_PRECOND_HIGH 0x69
#define SW_PRECOND_LOW 0x85
#define SW_NOTFOUND_HIGH 0x6A
#define SW_NOTFOUND_LOW 0x82
#define SW_UNSUP_HIGH 0x6D

typedef QPair<SCARDHANDLE, QByteArray> SCardAID;

Expand Down Expand Up @@ -67,40 +70,42 @@ class YubiKeyInterfacePCSC : public YubiKeyInterface

SCARDCONTEXT m_sc_context;

const QByteArray m_aid_yubikeyotp = QByteArrayLiteral("\xA0\x00\x00\x05\x27\x20\x01"); // Genuine Yubikey AID
const QByteArray m_aid_fidesmootp =
QByteArrayLiteral("\xA0\x00\x00\x06\x17\x00\x07\x53\x4E\xAF\x01"); // Fidesmo development AID
// This list contains all the AID (application identifier) codes for the Yubikey HMAC-SHA1 applet
// and also for compatible third-party ones. They will be tried one by one.
const QList<QByteArray> m_aid_codes = {
QByteArrayLiteral("\xA0\x00\x00\x05\x27\x20\x01"), // Yubico Yubikey
QByteArrayLiteral("\xA0\x00\x00\x06\x17\x00\x07\x53\x4E\xAF\x01") // Fidesmo development
};

// This map provides display names and applet select ADPUs for the various ATR records of the Yubikeys (and other
// compatible tokens)
const QHash<QByteArray, QPair<QByteArray, QString>> m_atr_names = {
// This map provides display names for the various hardware-specific ATR (answer to reset) codes
// of the Yubikeys (and other compatible tokens)
const QHash<QByteArray, QString> m_atr_names = {
// Yubico Yubikeys
{QByteArrayLiteral("\x3B\x8C\x80\x01\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\x72\x33\x58"),
{m_aid_yubikeyotp, "YubiKey NEO"}},
{QByteArrayLiteral("\x3B\x8C\x80\x01\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\x72\x33\x58"), "YubiKey NEO"},
{QByteArrayLiteral("\x3B\x8C\x80\x01\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\x72\xFF\x94"),
{m_aid_yubikeyotp, "YubiKey NEO via NFC"}},
"YubiKey NEO via NFC"},
{QByteArrayLiteral("\x3B\x8D\x80\x01\x80\x73\xC0\x21\xC0\x57\x59\x75\x62\x69\x4B\x65\x79\xF9"),
{m_aid_yubikeyotp, "YubiKey 5 NFC via NFC"}},
"YubiKey 5 NFC via NFC"},
{QByteArrayLiteral("\x3B\x8D\x80\x01\x80\x73\xC0\x21\xC0\x57\x59\x75\x62\x69\x4B\x65\xFF\x7F"),
{m_aid_yubikeyotp, "YubiKey 5 NFC via ACR122U"}},
"YubiKey 5 NFC via ACR122U"},
{QByteArrayLiteral("\x3B\xF8\x13\x00\x00\x81\x31\xFE\x15\x59\x75\x62\x69\x6B\x65\x79\x34\xD4"),
{m_aid_yubikeyotp, "YubiKey 4 OTP+CCID"}},
"YubiKey 4 OTP+CCID"},
{QByteArrayLiteral("\x3B\xF9\x18\x00\xFF\x81\x31\xFE\x45\x50\x56\x5F\x4A\x33\x41\x30\x34\x30\x40"),
{m_aid_yubikeyotp, "YubiKey NEO OTP+U2F+CCID (PKI)"}},
"YubiKey NEO OTP+U2F+CCID (PKI)"},
{QByteArrayLiteral("\x3B\xFA\x13\x00\x00\x81\x31\xFE\x15\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\xA6"),
{m_aid_yubikeyotp, "YubiKey NEO"}},
"YubiKey NEO"},
{QByteArrayLiteral("\x3B\xFC\x13\x00\x00\x81\x31\xFE\x15\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\x72\x33\xE1"),
{m_aid_yubikeyotp, "YubiKey NEO (PKI)"}},
"YubiKey NEO (PKI)"},
{QByteArrayLiteral("\x3B\xFC\x13\x00\x00\x81\x31\xFE\x45\x59\x75\x62\x69\x6B\x65\x79\x4E\x45\x4F\x72\x33\xB1"),
{m_aid_yubikeyotp, "YubiKey NEO"}},
"YubiKey NEO"},
{QByteArrayLiteral(
"\x3B\xFD\x13\x00\x00\x81\x31\xFE\x15\x80\x73\xC0\x21\xC0\x57\x59\x75\x62\x69\x4B\x65\x79\x40"),
{m_aid_yubikeyotp, "YubiKey 5 NFC (PKI)"}},
"YubiKey 5 NFC (PKI)"},
{QByteArrayLiteral(
"\x3B\xFD\x13\x00\x00\x81\x31\xFE\x45\x41\x37\x30\x30\x36\x43\x47\x20\x32\x34\x32\x52\x31\xD6"),
{m_aid_yubikeyotp, "YubiKey NEO (token)"}},
"YubiKey NEO (token)"},
// Other tokens implementing the Yubikey challenge-response protocol
{QByteArrayLiteral("\x3B\x80\x80\x01\x01"), {m_aid_fidesmootp, "vk-ykhmac on Fidesmo card 2.0"}}};
{QByteArrayLiteral("\x3B\x80\x80\x01\x01"), "Fidesmo Card 2.0"}};
};

#endif // KEEPASSX_YUBIKEY_INTERFACE_PCSC_H

0 comments on commit fe49dd1

Please sign in to comment.