==============================================================================

Repository containing the configuration software for two FMC boards:
FMC ADC 130M (active and passive) and FMC ADC 250M (active and passive) firmware.

==============================================================================

Installation Instructions:

    -> Install needed packages libmxml and libserial (Ubuntu):

1 - sudo apt-get install libmxml-dev libserial-dev

    -> Run configure script

2 - ./configure

    -> Run Makefile

3 - make

  -> Check INSTALL for more instructons on how to build and install the software

==============================================================================

Use Instructions:

    -> Go to src/ folder

1 - cd src/

    -> Execute one of the following programs, depending on the fmc board being tested
    (<platform_name> is either ML605 - Virtex6 Kit - or KC705 - Kintex7 Kit):

2 - sudo ./fmc_config_130m_4ch -p <platform_name>
2 - sudo ./fmc_config_130m_4ch_passive -p <platform_name>
2 - sudo ./fmc_config_250m_4ch -p <platform_name>
2 - sudo ./fmc_config_250m_4ch_passive -p <platform_name>

    -> Analyze data with chipscope:

3 - analyzer

    -> Open chipscope project in the GUI (file -> open project).

    -> Select project. It is lcoated on FMC_ADC_130M_4CH/hdl/chipscope/ or
          FMC_ADC_250M_4CH/hdl/chipscope/ dependening on your fmc board being
          tested.