WIFI-Scan example #3
Comments
|
No, Wi-Fi is not emulated, and there is no plan at the moment to add emulation of the Wi-Fi hardware. For testing network (TCP/IP) functionality you can try using Ethernet instead, which is emulated. |
igrr
pushed a commit
that referenced
this issue
Dec 30, 2019
This tests boots a Linux kernel on a Malta machine up to a busybox shell on the serial console. Few commands are executed before halting the machine (via reboot). We use the Fedora 24 kernel extracted from the image at: https://fedoraproject.org/wiki/Architectures/MIPS and the initrd cpio image from the kerneltests project: https://kerneltests.org/ If MIPS is a target being built, "make check-acceptance" will automatically include this test by the use of the "arch:mips" tags. Alternatively, this test can be run using: $ AVOCADO_ALLOW_UNTRUSTED_CODE=yes \ avocado --show=console run -t arch:mips64el \ tests/acceptance/boot_linux_console.py console: [ 0.000000] Linux version 3.19.3.mtoman.20150408 (mtoman@debian-co3-1) (gcc version 5.0.0 20150316 (Red Hat 5.0.0-0.20) (GCC) ) #3 Wed Apr 8 14:32:50 UTC 2015 console: [ 0.000000] Early serial console at I/O port 0x3f8 (options '38400n8') console: [ 0.000000] bootconsole [uart0] enabled console: [ 0.000000] CPU0 revision is: 00018900 (MIPS 5KE) console: [ 0.000000] Checking for the multiply/shift bug... no. console: [ 0.000000] Checking for the daddiu bug... no. [...] console: Boot successful. console: cat /proc/cpuinfo console: / # cat /proc/cpuinfo console: system type : MIPS Malta console: machine : Unknown console: processor : 0 console: cpu model : MIPS 5KE V0.0 console: : 1616.89 console: wait instruction : nouname -a console: microsecond timers : yes console: tlb_entries : 32 console: extra interrupt vector : yes console: hardware watchpoint : yes, count: 1, address/irw mask: [0x0ff8] console: isa : mips1 mips2 mips3 mips4 mips5 mips32r1 mips32r2 mips64r1 mips64r2 console: ASEs implemented : console: shadow register sets : 1 console: kscratch registers : 0 console: package : 0 console: core : 0 console: VCED exceptions : not available console: VCEI exceptions : not available console: / # console: / # uname -a console: Linux buildroot 3.19.3.mtoman.20150408 #3 Wed Apr 8 14:32:50 UTC 2015 mips64 GNU/Linux console: reboot console: / # console: / # reboot console: / # console: / # reboot: Restarting system PASS (7.04 s) JOB TIME : 7.20 s Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20191028073441.6448-27-philmd@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com> Signed-off-by: Cleber Rosa <crosa@redhat.com>
igrr
pushed a commit
that referenced
this issue
Dec 30, 2019
Currently offloads disabled by guest via the VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET command are not preserved on VM migration. Instead all offloads reported by guest features (via VIRTIO_PCI_GUEST_FEATURES) get enabled. What happens is: first the VirtIONet::curr_guest_offloads gets restored and offloads are getting set correctly: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=0, tso6=0, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_post_load_device (opaque=0x555557701ca0, version_id=11) at hw/net/virtio-net.c:2334 #3 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577c80 <vmstate_virtio_net_device>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:168 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2197 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 However later on the features are getting restored, and offloads get reset to everything supported by features: #0 qemu_set_offload (nc=0x555556a11400, csum=1, tso4=1, tso6=1, ecn=0, ufo=0) at net/net.c:474 #1 virtio_net_apply_guest_offloads (n=0x555557701ca0) at hw/net/virtio-net.c:720 #2 virtio_net_set_features (vdev=0x555557701ca0, features=5104441767) at hw/net/virtio-net.c:773 #3 virtio_set_features_nocheck (vdev=0x555557701ca0, val=5104441767) at hw/virtio/virtio.c:2052 #4 virtio_load (vdev=0x555557701ca0, f=0x5555569dc010, version_id=11) at hw/virtio/virtio.c:2220 #5 virtio_device_get (f=0x5555569dc010, opaque=0x555557701ca0, size=0, field=0x55555668cd00 <__compound_literal.5>) at hw/virtio/virtio.c:2036 #6 vmstate_load_state (f=0x5555569dc010, vmsd=0x555556577ce0 <vmstate_virtio_net>, opaque=0x555557701ca0, version_id=11) at migration/vmstate.c:143 #7 vmstate_load (f=0x5555569dc010, se=0x5555578189e0) at migration/savevm.c:829 #8 qemu_loadvm_section_start_full (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2211 #9 qemu_loadvm_state_main (f=0x5555569dc010, mis=0x5555569eee20) at migration/savevm.c:2395 #10 qemu_loadvm_state (f=0x5555569dc010) at migration/savevm.c:2467 #11 process_incoming_migration_co (opaque=0x0) at migration/migration.c:449 Fix this by preserving the state in saved_guest_offloads field and pushing out offload initialization to the new post load hook. Cc: qemu-stable@nongnu.org Signed-off-by: Mikhail Sennikovsky <mikhail.sennikovskii@cloud.ionos.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
igrr
pushed a commit
that referenced
this issue
Dec 30, 2019
Guests can crash QEMU when writting to PnP registers: $ echo 'writeb 0x800ff042 69' | qemu-system-sparc -M leon3_generic -S -bios /etc/magic -qtest stdio [I 1571938309.932255] OPENED [R +0.063474] writeb 0x800ff042 69 Segmentation fault (core dumped) (gdb) bt #0 0x0000000000000000 in () #1 0x0000555f4bcdf0bc in memory_region_write_with_attrs_accessor (mr=0x555f4d7be8c0, addr=66, value=0x7fff07d00f08, size=1, shift=0, mask=255, attrs=...) at memory.c:503 #2 0x0000555f4bcdf185 in access_with_adjusted_size (addr=66, value=0x7fff07d00f08, size=1, access_size_min=1, access_size_max=4, access_fn=0x555f4bcdeff4 <memory_region_write_with_attrs_accessor>, mr=0x555f4d7be8c0, attrs=...) at memory.c:539 #3 0x0000555f4bce2243 in memory_region_dispatch_write (mr=0x555f4d7be8c0, addr=66, data=69, op=MO_8, attrs=...) at memory.c:1489 #4 0x0000555f4bc80b20 in flatview_write_continue (fv=0x555f4d92c400, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1, addr1=66, l=1, mr=0x555f4d7be8c0) at exec.c:3161 #5 0x0000555f4bc80c65 in flatview_write (fv=0x555f4d92c400, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1) at exec.c:3201 #6 0x0000555f4bc80fb0 in address_space_write (as=0x555f4d7aa460, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1) at exec.c:3291 #7 0x0000555f4bc8101d in address_space_rw (as=0x555f4d7aa460, addr=2148528194, attrs=..., buf=0x7fff07d01120 "E", len=1, is_write=true) at exec.c:3301 #8 0x0000555f4bcdb388 in qtest_process_command (chr=0x555f4c2ed7e0 <qtest_chr>, words=0x555f4db0c5d0) at qtest.c:432 Instead of crashing, log the access as unimplemented. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com> Message-Id: <20191025110114.27091-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
Properly free each command resp to avoid memory leak.
ASAN shows memory leak stack:
Indirect leak of 2352520 byte(s) in 571 object(s) allocated from:
#0 0x7f6ca3308d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f6ca3127a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x557bf3c71d2b in qdict_new ../qobject/qdict.c:29
#3 0x557bf3c9caba in parse_object ../qobject/json-parser.c:318
#4 0x557bf3c9ce75 in json_parser_parse ../qobject/json-parser.c:580
#5 0x557bf3c8c8cf in json_message_process_token ../qobject/json-streamer.c:92
#6 0x557bf3c9ea59 in json_lexer_feed_char ../qobject/json-lexer.c:313
#7 0x557bf3c9eeb5 in json_lexer_feed ../qobject/json-lexer.c:350
#8 0x557bf3c4793a in qmp_fd_receive ../tests/qtest/libqtest.c:608
#9 0x557bf3c47b58 in qtest_qmp_receive ../tests/qtest/libqtest.c:618
#10 0x557bf3c44245 in wait_command ../tests/qtest/migration-helpers.c:59
#11 0x557bf3c445cb in migrate_query_status ../tests/qtest/migration-helpers.c:108
#12 0x557bf3c44642 in check_migration_status ../tests/qtest/migration-helpers.c:124
#13 0x557bf3c447e7 in wait_for_migration_status ../tests/qtest/migration-helpers.c:148
#14 0x557bf3c43b8f in test_migrate_auto_converge ../tests/qtest/migration-test.c:1243
......
Fix: 5e34005
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201023061218.2080844-2-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
libFuzzer triggered the following assertion:
cat << EOF | qemu-system-i386 -M pc-q35-5.0 \
-nographic -monitor none -serial none \
-qtest stdio -d guest_errors -trace pci\*
outl 0xcf8 0x8400f841
outl 0xcfc 0xebed205d
outl 0x5d02 0xedf82049
EOF
pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d
hw/pci/pci.c:268: int pci_bus_get_irq_level(PCIBus *, int): Assertion `irq_num < bus->nirq' failed.
This is because ich9_lpc_sci_irq() returns -1 for reserved
(illegal) values, but ich9_lpc_pmbase_sci_update() considers
it valid and store it in a 8-bit unsigned type. Then the 255
value is used as GSI IRQ, resulting in a PIRQ value of 247,
more than ICH9_LPC_NB_PIRQS (8).
Fix by simply ignoring the invalid access (and reporting it):
pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d
ICH9 LPC: SCI IRQ SEL #3 is reserved
pci_cfg_read mch 00:0 @0x0 -> 0x8086
pci_cfg_read mch 00:0 @0x0 -> 0x29c08086
...
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: 8f242cb ("ich9: implement SCI_IRQ_SEL register")
BugLink: https://bugs.launchpad.net/qemu/+bug/1878642
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200717151705.18611-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where the current monitor isn't set yet. Instead of using monitor_cur_env(), explicitly pass the Monitor pointer to the function. Without this fix, an HMP command like "x $pc" crashes like this: #0 0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270 #1 0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294 #2 0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299 #3 0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607 #4 0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681 #5 0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387 #6 0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421 #7 0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455 #8 0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484 #9 0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511 #10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876 #11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087 #12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47 After this fix, nothing is left in monitor_parse_arguments() that can indirectly call monitor_cur(), so the fix is complete. Fixes: ff04108 Reported-by: lichun <lichun@ruijie.com.cn> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201113114326.97663-4-kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
In qobject_type(), NULL is returned when the 'QObject' returned from parse_value() is not of QString type,
and this 'QObject' memory will leaked.
So we need to first cache the 'QObject' returned from parse_value(), and finally
free 'QObject' memory at the end of the function.
Also, we add a testcast about invalid dict key.
The memleak stack is as follows:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0xfffe4b3c34fb in __interceptor_malloc (/lib64/libasan.so.4+0xd34fb)
#1 0xfffe4ae48aa3 in g_malloc (/lib64/libglib-2.0.so.0+0x58aa3)
#2 0xaaab3557d9f7 in qnum_from_int qemu/qobject/qnum.c:25
#3 0xaaab35584d23 in parse_literal qemu/qobject/json-parser.c:511
#4 0xaaab35584d23 in parse_value qemu/qobject/json-parser.c:554
#5 0xaaab35583d77 in parse_pair qemu/qobject/json-parser.c:270
#6 0xaaab355845db in parse_object qemu/qobject/json-parser.c:327
#7 0xaaab355845db in parse_value qemu/qobject/json-parser.c:546
#8 0xaaab35585b1b in json_parser_parse qemu/qobject/json-parser.c:580
#9 0xaaab35583703 in json_message_process_token qemu/qobject/json-streamer.c:92
#10 0xaaab355ddccf in json_lexer_feed_char qemu/qobject/json-lexer.c:313
#11 0xaaab355de0eb in json_lexer_feed qemu/qobject/json-lexer.c:350
#12 0xaaab354aff67 in tcp_chr_read qemu/chardev/char-socket.c:525
#13 0xfffe4ae429db in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x529db)
#14 0xfffe4ae42d8f (/lib64/libglib-2.0.so.0+0x52d8f)
#15 0xfffe4ae430df in g_main_loop_run (/lib64/libglib-2.0.so.0+0x530df)
#16 0xaaab34d70bff in iothread_run qemu/iothread.c:82
#17 0xaaab3559d71b in qemu_thread_start qemu/util/qemu-thread-posix.c:519
Fixes: 532fb53 ("qapi: Make more of qobject_to()")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113145525.85151-1-alex.chen@huawei.com>
[Commit message tweaked]
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
Properly free resp for get_watchdog_action() to avoid memory leak.
ASAN shows memory leak stack:
Indirect leak of 12360 byte(s) in 3 object(s) allocated from:
#0 0x7f41ab6cbd4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f41ab4eaa50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x556487d5374b in qdict_new ../qobject/qdict.c:29
#3 0x556487d65e1a in parse_object ../qobject/json-parser.c:318
#4 0x556487d65cb6 in parse_pair ../qobject/json-parser.c:287
#5 0x556487d65ebd in parse_object ../qobject/json-parser.c:343
#6 0x556487d661d5 in json_parser_parse ../qobject/json-parser.c:580
#7 0x556487d513df in json_message_process_token ../qobject/json-streamer.c:92
#8 0x556487d63919 in json_lexer_feed_char ../qobject/json-lexer.c:313
#9 0x556487d63d75 in json_lexer_feed ../qobject/json-lexer.c:350
#10 0x556487d28b2a in qmp_fd_receive ../tests/qtest/libqtest.c:613
#11 0x556487d2a16f in qtest_qmp_eventwait_ref ../tests/qtest/libqtest.c:827
#12 0x556487d248e2 in get_watchdog_action ../tests/qtest/npcm7xx_watchdog_timer-test.c:94
#13 0x556487d25765 in test_enabling_flags ../tests/qtest/npcm7xx_watchdog_timer-test.c:243
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201118115646.2461726-3-kuhn.chenqun@huawei.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 20, 2021
When 'j = icu->nr_sense – 1', the 'j < icu->nr_sense' condition is true,
then 'j = icu->nr_sense', the'icu->init_sense[j]' has out-of-bounds access.
The asan showed stack:
ERROR: AddressSanitizer: heap-buffer-overflow on address 0x604000004d7d at pc 0x55852cd26a76 bp 0x7ffe39f26200 sp 0x7ffe39f261f0
READ of size 1 at 0x604000004d7d thread T0
#0 0x55852cd26a75 in rxicu_realize ../hw/intc/rx_icu.c:311
#1 0x55852cf075f7 in device_set_realized ../hw/core/qdev.c:886
#2 0x55852cd4a32f in property_set_bool ../qom/object.c:2251
#3 0x55852cd4f9bb in object_property_set ../qom/object.c:1398
#4 0x55852cd54f3f in object_property_set_qobject ../qom/qom-qobject.c:28
#5 0x55852cd4fc3f in object_property_set_bool ../qom/object.c:1465
#6 0x55852cbf0b27 in register_icu ../hw/rx/rx62n.c:156
#7 0x55852cbf12a6 in rx62n_realize ../hw/rx/rx62n.c:261
#8 0x55852cf075f7 in device_set_realized ../hw/core/qdev.c:886
#9 0x55852cd4a32f in property_set_bool ../qom/object.c:2251
#10 0x55852cd4f9bb in object_property_set ../qom/object.c:1398
#11 0x55852cd54f3f in object_property_set_qobject ../qom/qom-qobject.c:28
#12 0x55852cd4fc3f in object_property_set_bool ../qom/object.c:1465
#13 0x55852cbf1a85 in rx_gdbsim_init ../hw/rx/rx-gdbsim.c:109
#14 0x55852cd22de0 in qemu_init ../softmmu/vl.c:4380
#15 0x55852ca57088 in main ../softmmu/main.c:49
#16 0x7feefafa5d42 in __libc_start_main (/lib64/libc.so.6+0x26d42)
Add the 'ice->src[i].sense' initialize to the default value, and then
process init_sense array to identify which irqs should be level-triggered.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201111141733.2358800-1-kuhn.chenqun@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
georgik
pushed a commit
to georgik/qemu
that referenced
this issue
Oct 13, 2021
In mirror_iteration() we call mirror_wait_on_conflicts() with `self` parameter set to NULL. Starting from commit d44dae1 we dereference `self` pointer in mirror_wait_on_conflicts() without checks if it is not NULL. Backtrace: Program terminated with signal SIGSEGV, Segmentation fault. #0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>) at ../block/mirror.c:172 172 self->waiting_for_op = op; [Current thread is 1 (Thread 0x7f0908931ec0 (LWP 380249))] (gdb) bt #0 mirror_wait_on_conflicts (self=0x0, s=<optimized out>, offset=<optimized out>, bytes=<optimized out>) at ../block/mirror.c:172 espressif#1 0x00005610c5d9d631 in mirror_run (job=0x5610c76a2c00, errp=<optimized out>) at ../block/mirror.c:491 espressif#2 0x00005610c5d58726 in job_co_entry (opaque=0x5610c76a2c00) at ../job.c:917 espressif#3 0x00005610c5f046c6 in coroutine_trampoline (i0=<optimized out>, i1=<optimized out>) at ../util/coroutine-ucontext.c:173 espressif#4 0x00007f0909975820 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91 from /usr/lib64/libc.so.6 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001404 Fixes: d44dae1 ("block/mirror: fix active mirror dead-lock in mirror_wait_on_conflicts") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20210910124533.288318-1-sgarzare@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 3, 2022
To: <quintela@redhat.com>, <dgilbert@redhat.com>, <qemu-devel@nongnu.org> CC: Li Zhijian <lizhijian@cn.fujitsu.com> Date: Sat, 31 Jul 2021 22:05:51 +0800 (5 weeks, 4 days, 17 hours ago) multifd with unsupported protocol will cause a segment fault. (gdb) bt #0 0x0000563b4a93faf8 in socket_connect (addr=0x0, errp=0x7f7f02675410) at ../util/qemu-sockets.c:1190 #1 0x0000563b4a797a03 in qio_channel_socket_connect_sync (ioc=0x563b4d16e8c0, addr=0x0, errp=0x7f7f02675410) at ../io/channel-socket.c:145 #2 0x0000563b4a797abf in qio_channel_socket_connect_worker (task=0x563b4cd86c30, opaque=0x0) at ../io/channel-socket.c:168 #3 0x0000563b4a792631 in qio_task_thread_worker (opaque=0x563b4cd86c30) at ../io/task.c:124 #4 0x0000563b4a91da69 in qemu_thread_start (args=0x563b4c44bb80) at ../util/qemu-thread-posix.c:541 #5 0x00007f7fe9b5b3f9 in ?? () #6 0x0000000000000000 in ?? () It's enough to check migrate_multifd_is_allowed() in multifd cleanup() and multifd setup() though there are so many other places using migrate_use_multifd(). Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 3, 2022
This patch fixed as follows:
Thread 1 (Thread 0x7f34ee738d80 (LWP 11212)):
#0 __pthread_clockjoin_ex (threadid=139847152957184, thread_return=0x7f30b1febf30, clockid=<optimized out>, abstime=<optimized out>, block=<optimized out>) at pthread_join_common.c:145
#1 0x0000563401998e36 in qemu_thread_join (thread=0x563402d66610) at util/qemu-thread-posix.c:587
#2 0x00005634017a79fa in process_incoming_migration_co (opaque=0x0) at migration/migration.c:502
#3 0x00005634019b59c9 in coroutine_trampoline (i0=63395504, i1=22068) at util/coroutine-ucontext.c:115
#4 0x00007f34ef860660 in ?? () at ../sysdeps/unix/sysv/linux/x86_64/__start_context.S:91 from /lib/x86_64-linux-gnu/libc.so.6
#5 0x00007f30b21ee730 in ?? ()
#6 0x0000000000000000 in ?? ()
Thread 13 (Thread 0x7f30b3dff700 (LWP 11747)):
#0 __lll_lock_wait (futex=futex@entry=0x56340218ffa0 <qemu_global_mutex>, private=0) at lowlevellock.c:52
#1 0x00007f34efa000a3 in _GI__pthread_mutex_lock (mutex=0x56340218ffa0 <qemu_global_mutex>) at ../nptl/pthread_mutex_lock.c:80
#2 0x0000563401997f99 in qemu_mutex_lock_impl (mutex=0x56340218ffa0 <qemu_global_mutex>, file=0x563401b7a80e "migration/colo.c", line=806) at util/qemu-thread-posix.c:78
#3 0x0000563401407144 in qemu_mutex_lock_iothread_impl (file=0x563401b7a80e "migration/colo.c", line=806) at /home/workspace/colo-qemu/cpus.c:1899
#4 0x00005634017ba8e8 in colo_process_incoming_thread (opaque=0x563402d664c0) at migration/colo.c:806
#5 0x0000563401998b72 in qemu_thread_start (args=0x5634039f8370) at util/qemu-thread-posix.c:519
#6 0x00007f34ef9fd609 in start_thread (arg=<optimized out>) at pthread_create.c:477
#7 0x00007f34ef924293 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
The QEMU main thread is holding the lock:
(gdb) p qemu_global_mutex
$1 = {lock = {_data = {lock = 2, __count = 0, __owner = 11212, __nusers = 9, __kind = 0, __spins = 0, __elision = 0, __list = {_prev = 0x0, __next = 0x0}},
__size = "\002\000\000\000\000\000\000\000\314+\000\000\t", '\000' <repeats 26 times>, __align = 2}, file = 0x563401c07e4b "util/main-loop.c", line = 240,
initialized = true}
>From the call trace, we can see it is a deadlock bug. and the QEMU main thread holds the global mutex to wait until the COLO thread ends. and the colo thread
wants to acquire the global mutex, which will cause a deadlock. So, we should release the qemu_global_mutex before waiting colo thread ends.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Reviewed-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
igrr
pushed a commit
that referenced
this issue
Feb 3, 2022
Without the previous commit, when running 'make check-qtest-i386'
with QEMU configured with '--enable-sanitizers' we get:
AddressSanitizer:DEADLYSIGNAL
=================================================================
==287878==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000344
==287878==The signal is caused by a WRITE memory access.
==287878==Hint: address points to the zero page.
#0 0x564b2e5bac27 in blk_inc_in_flight block/block-backend.c:1346:5
#1 0x564b2e5bb228 in blk_pwritev_part block/block-backend.c:1317:5
#2 0x564b2e5bcd57 in blk_pwrite block/block-backend.c:1498:11
#3 0x564b2ca1cdd3 in fdctrl_write_data hw/block/fdc.c:2221:17
#4 0x564b2ca1b2f7 in fdctrl_write hw/block/fdc.c:829:9
#5 0x564b2dc49503 in portio_write softmmu/ioport.c:201:9
Add the reproducer for CVE-2021-20196.
Suggested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20211124161536.631563-4-philmd@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
igrr
pushed a commit
that referenced
this issue
Aug 2, 2022
In commit 00f05c0 we gave the TYPE_XLNX_CSU_DMA object its own class struct, but forgot to update the TypeInfo::class_size accordingly. This meant that not enough memory was allocated for the class struct, and the initialization of xcdc->read in the class init function wrote off the end of the memory. Add the missing line. Found by running 'check-qtest-aarch64' with a clang address-sanitizer build, which complains: ==2542634==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61000000ab00 at pc 0x559a20aebc29 bp 0x7fff97df74d0 sp 0x7fff97df74c8 WRITE of size 8 at 0x61000000ab00 thread T0 #0 0x559a20aebc28 in xlnx_csu_dma_class_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../hw/dma/xlnx_csu_dma.c:722:16 #1 0x559a21bf297c in type_initialize /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:365:9 #2 0x559a21bf3442 in object_class_foreach_tramp /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1070:5 #3 0x7f09bcb641b7 in g_hash_table_foreach (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x401b7) #4 0x559a21bf3c27 in object_class_foreach /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1092:5 #5 0x559a21bf3c27 in object_class_get_list /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1149:5 #6 0x559a2081a2fd in select_machine /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:1661:24 #7 0x559a2081a2fd in qemu_create_machine /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:2146:35 #8 0x559a2081a2fd in qemu_init /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/vl.c:3706:5 #9 0x559a20720ed5 in main /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../softmmu/main.c:49:5 #10 0x7f09baec00b2 in __libc_start_main /build/glibc-sMfBJT/glibc-2.31/csu/../csu/libc-start.c:308:16 #11 0x559a2067673d in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/qemu-system-aarch64+0xf4b73d) 0x61000000ab00 is located 0 bytes to the right of 192-byte region [0x61000000aa40,0x61000000ab00) allocated by thread T0 here: #0 0x559a206eeff2 in calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/qemu-system-aarch64+0xfc3ff2) #1 0x7f09bcb7bef0 in g_malloc0 (/usr/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57ef0) #2 0x559a21bf3442 in object_class_foreach_tramp /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/san/../../qom/object.c:1070:5 Fixes: 00f05c0 ("hw/dma/xlnx_csu_dma: Support starting a read transfer through a class method") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20220308150207.2546272-1-peter.maydell@linaro.org
igrr
pushed a commit
that referenced
this issue
Aug 2, 2022
Include the qtest reproducer provided by Alexander Bulekov in https://gitlab.com/qemu-project/qemu/-/issues/542. Without the previous commit, we get: $ make check-qtest-i386 ... Running test tests/qtest/intel-hda-test AddressSanitizer:DEADLYSIGNAL ================================================================= ==1580408==ERROR: AddressSanitizer: stack-overflow on address 0x7ffc3d566fe0 #0 0x63d297cf in address_space_translate_internal softmmu/physmem.c:356 #1 0x63d27260 in flatview_do_translate softmmu/physmem.c:499:15 #2 0x63d27af5 in flatview_translate softmmu/physmem.c:565:15 #3 0x63d4ce84 in flatview_write softmmu/physmem.c:2850:10 #4 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 #5 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 #6 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #7 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 #8 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 #9 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1 #10 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1 #11 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12 #12 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5 #13 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5 #14 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5 #15 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9 #16 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5 #17 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9 #18 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5 #19 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5 #20 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18 #21 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16 #22 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23 #23 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12 #24 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 #25 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 #26 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #27 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 #28 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 #29 0x62ae5ec0 in stl_le_dma include/sysemu/dma.h:275:1 #30 0x62ae5ba2 in stl_le_pci_dma include/hw/pci/pci.h:871:1 #31 0x62ad59a6 in intel_hda_response hw/audio/intel-hda.c:372:12 #32 0x62ad2afb in hda_codec_response hw/audio/intel-hda.c:107:5 #33 0x62aec4e1 in hda_audio_command hw/audio/hda-codec.c:655:5 #34 0x62ae05d9 in intel_hda_send_command hw/audio/intel-hda.c:307:5 #35 0x62adff54 in intel_hda_corb_run hw/audio/intel-hda.c:342:9 #36 0x62adc13b in intel_hda_set_corb_wp hw/audio/intel-hda.c:548:5 #37 0x62ae5942 in intel_hda_reg_write hw/audio/intel-hda.c:977:9 #38 0x62ada10a in intel_hda_mmio_write hw/audio/intel-hda.c:1054:5 #39 0x63d8f383 in memory_region_write_accessor softmmu/memory.c:492:5 #40 0x63d8ecc1 in access_with_adjusted_size softmmu/memory.c:554:18 #41 0x63d8d5d6 in memory_region_dispatch_write softmmu/memory.c:1504:16 #42 0x63d5e85e in flatview_write_continue softmmu/physmem.c:2812:23 #43 0x63d4d05b in flatview_write softmmu/physmem.c:2854:12 #44 0x63d4cb18 in address_space_write softmmu/physmem.c:2950:18 #45 0x63d4d387 in address_space_rw softmmu/physmem.c:2960:16 #46 0x62ae12f2 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 qemu#47 0x62ae104a in dma_memory_rw include/sysemu/dma.h:132:12 #48 0x62ae6157 in dma_memory_write include/sysemu/dma.h:173:12 ... SUMMARY: AddressSanitizer: stack-overflow softmmu/physmem.c:356 in address_space_translate_internal ==1580408==ABORTING Broken pipe Aborted (core dumped) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211218160912.1591633-4-philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
igrr
pushed a commit
that referenced
this issue
Aug 2, 2022
The issue reported by OSS-Fuzz produces the following backtrace:
==447470==ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1 at 0x61500002a080 thread T0
#0 0x71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18
#1 0x7175f139 in sdhci_read hw/sd/sdhci.c:1022:19
#2 0x721b937b in memory_region_read_accessor softmmu/memory.c:440:11
#3 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#4 0x7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16
#5 0x7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9
#6 0x7212db5d in flatview_read_continue softmmu/physmem.c:2879:23
#7 0x7212f958 in flatview_read softmmu/physmem.c:2921:12
#8 0x7212f418 in address_space_read_full softmmu/physmem.c:2934:18
#9 0x721305a9 in address_space_rw softmmu/physmem.c:2962:16
#10 0x7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12
#11 0x7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12
#12 0x71759684 in dma_memory_read include/sysemu/dma.h:152:12
#13 0x7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27
#14 0x7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13
#15 0x7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9
#16 0x717629ee in sdhci_write hw/sd/sdhci.c:1212:9
#17 0x72172513 in memory_region_write_accessor softmmu/memory.c:492:5
#18 0x72171e51 in access_with_adjusted_size softmmu/memory.c:554:18
#19 0x72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16
#20 0x721419ee in flatview_write_continue softmmu/physmem.c:2812:23
#21 0x721301eb in flatview_write softmmu/physmem.c:2854:12
#22 0x7212fca8 in address_space_write softmmu/physmem.c:2950:18
#23 0x721d9a53 in qtest_process_command softmmu/qtest.c:727:9
A DMA descriptor is previously filled in RAM. An I/O access to the
device (frames #22 to #16) start the DMA engine (frame #13). The
engine fetch the descriptor and execute the request, which itself
accesses the SDHCI I/O registers (frame #1 and #0), triggering a
re-entrancy issue.
Fix by prohibit transactions from the DMA to devices. The DMA engine
is thus restricted to memories.
Reported-by: OSS-Fuzz (Issue 36391)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/451
Message-Id: <20211215205656.488940-3-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
igrr
pushed a commit
that referenced
this issue
Aug 2, 2022
Include the qtest reproducer provided by Alexander Bulekov in https://gitlab.com/qemu-project/qemu/-/issues/451. Without the previous commit, we get: $ make check-qtest-i386 ... Running test qtest-i386/fuzz-sdcard-test ==447470==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61500002a080 at pc 0x564c71766d48 bp 0x7ffc126c62b0 sp 0x7ffc126c62a8 READ of size 1 at 0x61500002a080 thread T0 #0 0x564c71766d47 in sdhci_read_dataport hw/sd/sdhci.c:474:18 #1 0x564c7175f139 in sdhci_read hw/sd/sdhci.c:1022:19 #2 0x564c721b937b in memory_region_read_accessor softmmu/memory.c:440:11 #3 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #4 0x564c7216f47c in memory_region_dispatch_read1 softmmu/memory.c:1424:16 #5 0x564c7216ebb9 in memory_region_dispatch_read softmmu/memory.c:1452:9 #6 0x564c7212db5d in flatview_read_continue softmmu/physmem.c:2879:23 #7 0x564c7212f958 in flatview_read softmmu/physmem.c:2921:12 #8 0x564c7212f418 in address_space_read_full softmmu/physmem.c:2934:18 #9 0x564c721305a9 in address_space_rw softmmu/physmem.c:2962:16 #10 0x564c7175a392 in dma_memory_rw_relaxed include/sysemu/dma.h:89:12 #11 0x564c7175a0ea in dma_memory_rw include/sysemu/dma.h:132:12 #12 0x564c71759684 in dma_memory_read include/sysemu/dma.h:152:12 #13 0x564c7175518c in sdhci_do_adma hw/sd/sdhci.c:823:27 #14 0x564c7174bf69 in sdhci_data_transfer hw/sd/sdhci.c:935:13 #15 0x564c7176aaa7 in sdhci_send_command hw/sd/sdhci.c:376:9 #16 0x564c717629ee in sdhci_write hw/sd/sdhci.c:1212:9 #17 0x564c72172513 in memory_region_write_accessor softmmu/memory.c:492:5 #18 0x564c72171e51 in access_with_adjusted_size softmmu/memory.c:554:18 #19 0x564c72170766 in memory_region_dispatch_write softmmu/memory.c:1504:16 #20 0x564c721419ee in flatview_write_continue softmmu/physmem.c:2812:23 #21 0x564c721301eb in flatview_write softmmu/physmem.c:2854:12 #22 0x564c7212fca8 in address_space_write softmmu/physmem.c:2950:18 #23 0x564c721d9a53 in qtest_process_command softmmu/qtest.c:727:9 0x61500002a080 is located 0 bytes to the right of 512-byte region [0x615000029e80,0x61500002a080) allocated by thread T0 here: #0 0x564c708e1737 in __interceptor_calloc (qemu-system-i386+0x1e6a737) #1 0x7ff05567b5e0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x5a5e0) #2 0x564c71774adb in sdhci_pci_realize hw/sd/sdhci-pci.c:36:5 SUMMARY: AddressSanitizer: heap-buffer-overflow hw/sd/sdhci.c:474:18 in sdhci_read_dataport Shadow bytes around the buggy address: 0x0c2a7fffd3c0: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c2a7fffd3d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd3e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd3f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c2a7fffd400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c2a7fffd410:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c2a7fffd420: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd430: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd440: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd450: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c2a7fffd460: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Heap left redzone: fa Freed heap region: fd ==447470==ABORTING Broken pipe ERROR qtest-i386/fuzz-sdcard-test - too few tests run (expected 3, got 2) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20211215205656.488940-4-philmd@redhat.com> [thuth: Replaced "-m 4G" with "-m 512M"] Signed-off-by: Thomas Huth <thuth@redhat.com>
igrr
pushed a commit
that referenced
this issue
Aug 2, 2022
Since commit 0439c5a ("block/block-backend.c: assertions for block-backend") QEMU crashes when using Cocoa on Darwin hosts. Example on macOS: $ qemu-system-i386 Assertion failed: (qemu_in_main_thread()), function blk_all_next, file block-backend.c, line 552. Abort trap: 6 Looking with lldb: Assertion failed: (qemu_in_main_thread()), function blk_all_next, file block-backend.c, line 552. Process 76914 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert frame #4: 0x000000010057c2d4 qemu-system-i386`blk_all_next.cold.1 at block-backend.c:552:5 [opt] 549 */ 550 BlockBackend *blk_all_next(BlockBackend *blk) 551 { --> 552 GLOBAL_STATE_CODE(); 553 return blk ? QTAILQ_NEXT(blk, link) 554 : QTAILQ_FIRST(&block_backends); 555 } Target 1: (qemu-system-i386) stopped. (lldb) bt * thread #1, queue = 'com.apple.main-thread', stop reason = hit program assert frame #0: 0x00000001908c99b8 libsystem_kernel.dylib`__pthread_kill + 8 frame #1: 0x00000001908fceb0 libsystem_pthread.dylib`pthread_kill + 288 frame #2: 0x000000019083a314 libsystem_c.dylib`abort + 164 frame #3: 0x000000019083972c libsystem_c.dylib`__assert_rtn + 300 * frame #4: 0x000000010057c2d4 qemu-system-i386`blk_all_next.cold.1 at block-backend.c:552:5 [opt] frame #5: 0x00000001003c00b4 qemu-system-i386`blk_all_next(blk=<unavailable>) at block-backend.c:552:5 [opt] frame #6: 0x00000001003d8f04 qemu-system-i386`qmp_query_block(errp=0x0000000000000000) at qapi.c:591:16 [opt] frame #7: 0x000000010003ab0c qemu-system-i386`main [inlined] addRemovableDevicesMenuItems at cocoa.m:1756:21 [opt] frame #8: 0x000000010003ab04 qemu-system-i386`main(argc=<unavailable>, argv=<unavailable>) at cocoa.m:1980:5 [opt] frame #9: 0x00000001012690f4 dyld`start + 520 As we are in passed release 7.0 hard freeze, disable the block backend assertion which, while being valuable during development, is not helpful to users. We'll restore this assertion immediately once 7.0 is released and work on a fix. Suggested-by: Akihiko Odaki <akihiko.odaki@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20220325183707.85733-1-philippe.mathieu.daude@gmail.com>
igrr
pushed a commit
that referenced
this issue
Feb 23, 2023
Fix warnings such:
disas/nanomips.c:3251:64: warning: format specifies type 'char *' but the argument has type 'int64' (aka 'long long') [-Wformat]
return img_format("CACHE 0x%" PRIx64 ", %s(%s)", op_value, s_value, rs);
~~ ^~~~~~~
%lld
To avoid crashes such (kernel from commit f375ad6):
$ qemu-system-mipsel -cpu I7200 -d in_asm -kernel generic_nano32r6el_page4k
...
----------------
IN: __bzero
0x805c6084: 20c4 6950 ADDU r13, a0, a2
0x805c6088: 9089 ADDIU a0, 1
Process 70261 stopped
* thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0)
frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4
libsystem_platform.dylib`:
-> 0x1bfe38864 <+4>: ldr q0, [x1]
0x1bfe38868 <+8>: adr x3, #-0xc8 ; ___lldb_unnamed_symbol314
0x1bfe3886c <+12>: ldr q2, [x3], #0x10
0x1bfe38870 <+16>: and x2, x0, #0xf
Target 0: (qemu-system-mipsel) stopped.
(lldb) bt
* thread #6, stop reason = EXC_BAD_ACCESS (code=1, address=0xfffffffffffffff0)
* frame #0: 0x00000001bfe38864 libsystem_platform.dylib`_platform_strlen + 4
frame #1: 0x00000001bfce76a0 libsystem_c.dylib`__vfprintf + 4544
frame #2: 0x00000001bfd158b4 libsystem_c.dylib`_vasprintf + 280
frame #3: 0x0000000101c22fb0 libglib-2.0.0.dylib`g_vasprintf + 28
frame #4: 0x0000000101bfb7d8 libglib-2.0.0.dylib`g_strdup_vprintf + 32
frame #5: 0x000000010000fb70 qemu-system-mipsel`img_format(format=<unavailable>) at nanomips.c:103:14 [opt]
frame #6: 0x0000000100018868 qemu-system-mipsel`SB_S9_(instruction=<unavailable>, info=<unavailable>) at nanomips.c:12616:12 [opt]
frame #7: 0x000000010000f90c qemu-system-mipsel`print_insn_nanomips at nanomips.c:589:28 [opt]
Fixes: 4066c15 ("disas/nanomips: Remove IMMEDIATE functions")
Reported-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221101114458.25756-2-philmd@linaro.org>
listout
pushed a commit
to listout/qemu
that referenced
this issue
Feb 23, 2023
The DMA engine is started by I/O access and then itself accesses the
I/O registers, triggering a reentrancy bug.
The following log can reveal it:
==5637==ERROR: AddressSanitizer: stack-overflow
#0 0x5595435f6078 in tulip_xmit_list_update qemu/hw/net/tulip.c:673
espressif#1 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
espressif#2 0x559544637f86 in memory_region_write_accessor qemu/softmmu/memory.c:492:5
espressif#3 0x5595446379fa in access_with_adjusted_size qemu/softmmu/memory.c:554:18
espressif#4 0x5595446372fa in memory_region_dispatch_write qemu/softmmu/memory.c
espressif#5 0x55954468b74c in flatview_write_continue qemu/softmmu/physmem.c:2825:23
espressif#6 0x559544683662 in flatview_write qemu/softmmu/physmem.c:2867:12
espressif#7 0x5595446833f3 in address_space_write qemu/softmmu/physmem.c:2963:18
espressif#8 0x5595435fb082 in dma_memory_rw_relaxed qemu/include/sysemu/dma.h:87:12
espressif#9 0x5595435fb082 in dma_memory_rw qemu/include/sysemu/dma.h:130:12
espressif#10 0x5595435fb082 in dma_memory_write qemu/include/sysemu/dma.h:171:12
espressif#11 0x5595435fb082 in stl_le_dma qemu/include/sysemu/dma.h:272:1
espressif#12 0x5595435fb082 in stl_le_pci_dma qemu/include/hw/pci/pci.h:910:1
espressif#13 0x5595435fb082 in tulip_desc_write qemu/hw/net/tulip.c:101:9
espressif#14 0x5595435f7e3d in tulip_xmit_list_update qemu/hw/net/tulip.c:706:9
espressif#15 0x5595435f204a in tulip_write qemu/hw/net/tulip.c:805:13
Fix this bug by restricting the DMA engine to memories regions.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
listout
pushed a commit
to listout/qemu
that referenced
this issue
Feb 23, 2023
Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status" causes segmentation fault with following dumpstack: espressif#1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312 espressif#2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63 espressif#3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128 espressif#4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150 espressif#5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178 espressif#6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421 espressif#7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320 espressif#8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0 espressif#9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297 espressif#10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320 espressif#11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596 espressif#12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734 espressif#13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38 espressif#14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47 Fixes: ebb6207 ("hw/acpi: Add ACPI Generic Event Device Support") Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
listout
pushed a commit
to listout/qemu
that referenced
this issue
Feb 23, 2023
When building QEMU with DEBUG_ATI defined then running with '-device ati-vga,romfile="" -d unimp,guest_errors -trace ati\*' we get: ati_mm_write 4 0x16c0 DP_CNTL <- 0x1 ati_mm_write 4 0x146c DP_GUI_MASTER_CNTL <- 0x2 ati_mm_write 4 0x16c8 DP_MIX <- 0xff0000 ati_mm_write 4 0x16c4 DP_DATATYPE <- 0x2 ati_mm_write 4 0x224 CRTC_OFFSET <- 0x0 ati_mm_write 4 0x142c DST_PITCH_OFFSET <- 0xfe00000 ati_mm_write 4 0x1420 DST_Y <- 0x3fff ati_mm_write 4 0x1410 DST_HEIGHT <- 0x3fff ati_mm_write 4 0x1588 DST_WIDTH_X <- 0x3fff3fff ati_2d_blt: vram:0x7fff5fa00000 addr:0 ds:0x7fff61273800 stride:2560 bpp:32 rop:0xff ati_2d_blt: 0 0 0, 0 127 0, (0,0) -> (16383,16383) 16383x16383 > ^ ati_2d_blt: pixman_fill(dst:0x7fff5fa00000, stride:254, bpp:8, x:16383, y:16383, w:16383, h:16383, xor:0xff000000) Thread 3 "qemu-system-i38" received signal SIGSEGV, Segmentation fault. (gdb) bt #0 0x00007ffff7f62ce0 in sse2_fill.lto_priv () at /lib64/libpixman-1.so.0 espressif#1 0x00007ffff7f09278 in pixman_fill () at /lib64/libpixman-1.so.0 espressif#2 0x0000555557b5a9af in ati_2d_blt (s=0x631000028800) at hw/display/ati_2d.c:196 espressif#3 0x0000555557b4b5a2 in ati_mm_write (opaque=0x631000028800, addr=5512, data=1073692671, size=4) at hw/display/ati.c:843 espressif#4 0x0000555558b90ec4 in memory_region_write_accessor (mr=0x631000039cc0, addr=5512, ..., size=4, ...) at softmmu/memory.c:492 Commit 584acf3 ("ati-vga: Fix reverse bit blts") introduced the local dst_x and dst_y which adjust the (x, y) coordinates depending on the direction in the SRCCOPY ROP3 operation, but forgot to address the same issue for the PATCOPY, BLACKNESS and WHITENESS operations, which also call pixman_fill(). Fix that now by using the adjusted coordinates in the pixman_fill call, and update the related debug printf(). Reported-by: Qiang Liu <qiangliu@zju.edu.cn> Fixes: 584acf3 ("ati-vga: Fix reverse bit blts") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Mauro Matteo Cascella <mcascell@redhat.com> Message-Id: <20210906153103.1661195-1-philmd@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
mattiantonini
pushed a commit
to mattiantonini/ESP32-QEMU
that referenced
this issue
Feb 23, 2023
This is below memleak detected when to quit the qemu-system-x86_64 (with
vhost-scsi-pci).
(qemu) quit
=================================================================
==15568==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917)
#1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5)
espressif#2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92
espressif#3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131
espressif#4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036
espressif#5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431
espressif#6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576
espressif#7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493
espressif#8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555
espressif#9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515
espressif#10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825
espressif#11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867
espressif#12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963
espressif#13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973
espressif#14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639
espressif#15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890
espressif#16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51
espressif#17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505
espressif#18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4)
Free the vsc->inflight at the 'stop' path.
Fixes: b82526c ("vhost-scsi: support inflight io track")
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Li Feng <fengli@smartx.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230104160433.21353-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
mattiantonini
pushed a commit
to mattiantonini/ESP32-QEMU
that referenced
this issue
Feb 23, 2023
Fixes the appended use-after-free. The root cause is that
during tb invalidation we use CPU_FOREACH, and therefore
to safely free a vCPU we must wait for an RCU grace period
to elapse.
$ x86_64-linux-user/qemu-x86_64 tests/tcg/x86_64-linux-user/munmap-pthread
=================================================================
==1800604==ERROR: AddressSanitizer: heap-use-after-free on address 0x62d0005f7418 at pc 0x5593da6704eb bp 0x7f4961a7ac70 sp 0x7f4961a7ac60
READ of size 8 at 0x62d0005f7418 thread T2
#0 0x5593da6704ea in tb_jmp_cache_inval_tb ../accel/tcg/tb-maint.c:244
#1 0x5593da6704ea in do_tb_phys_invalidate ../accel/tcg/tb-maint.c:290
espressif#2 0x5593da670631 in tb_phys_invalidate__locked ../accel/tcg/tb-maint.c:306
espressif#3 0x5593da670631 in tb_invalidate_phys_page_range__locked ../accel/tcg/tb-maint.c:542
espressif#4 0x5593da67106d in tb_invalidate_phys_range ../accel/tcg/tb-maint.c:614
espressif#5 0x5593da6a64d4 in target_munmap ../linux-user/mmap.c:766
espressif#6 0x5593da6dba05 in do_syscall1 ../linux-user/syscall.c:10105
espressif#7 0x5593da6f564c in do_syscall ../linux-user/syscall.c:13329
espressif#8 0x5593da49e80c in cpu_loop ../linux-user/x86_64/../i386/cpu_loop.c:233
espressif#9 0x5593da6be28c in clone_func ../linux-user/syscall.c:6633
espressif#10 0x7f496231cb42 in start_thread nptl/pthread_create.c:442
espressif#11 0x7f49623ae9ff (/lib/x86_64-linux-gnu/libc.so.6+0x1269ff)
0x62d0005f7418 is located 28696 bytes inside of 32768-byte region [0x62d0005f0400,0x62d0005f8400)
freed by thread T148 here:
#0 0x7f49627b6460 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x5593da5ac057 in cpu_exec_unrealizefn ../cpu.c:180
espressif#2 0x5593da81f851 (/home/cota/src/qemu/build/qemu-x86_64+0x484851)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-2-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-27-alex.bennee@linaro.org>
mattiantonini
pushed a commit
to mattiantonini/ESP32-QEMU
that referenced
this issue
Feb 23, 2023
Fixes this tsan crash, easy to reproduce with any large enough program:
$ tests/unit/test-qht
1..2
ThreadSanitizer: CHECK failed: sanitizer_deadlock_detector.h:67 "((n_all_locks_)) < (((sizeof(all_locks_with_contexts_)/sizeof((all_locks_with_contexts_)[0]))))" (0x40, 0x40) (tid=1821568)
#0 __tsan::CheckUnwind() ../../../../src/libsanitizer/tsan/tsan_rtl.cpp:353 (libtsan.so.2+0x90034)
#1 __sanitizer::CheckFailed(char const*, int, char const*, unsigned long long, unsigned long long) ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:86 (libtsan.so.2+0xca555)
espressif#2 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:67 (libtsan.so.2+0xb3616)
espressif#3 __sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::addLock(unsigned long, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:59 (libtsan.so.2+0xb3616)
espressif#4 __sanitizer::DeadlockDetector<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >::onLockAfter(__sanitizer::DeadlockDetectorTLS<__sanitizer::TwoLevelBitVector<1ul, __sanitizer::BasicBitVector<unsigned long> > >*, unsigned long, unsigned int) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector.h:216 (libtsan.so.2+0xb3616)
espressif#5 __sanitizer::DD::MutexAfterLock(__sanitizer::DDCallback*, __sanitizer::DDMutex*, bool, bool) ../../../../src/libsanitizer/sanitizer_common/sanitizer_deadlock_detector1.cpp:169 (libtsan.so.2+0xb3616)
espressif#6 __tsan::MutexPostLock(__tsan::ThreadState*, unsigned long, unsigned long, unsigned int, int) ../../../../src/libsanitizer/tsan/tsan_rtl_mutex.cpp:200 (libtsan.so.2+0xa3382)
espressif#7 __tsan_mutex_post_lock ../../../../src/libsanitizer/tsan/tsan_interface_ann.cpp:384 (libtsan.so.2+0x76bc3)
espressif#8 qemu_spin_lock /home/cota/src/qemu/include/qemu/thread.h:259 (test-qht+0x44a97)
espressif#9 qht_map_lock_buckets ../util/qht.c:253 (test-qht+0x44a97)
espressif#10 do_qht_iter ../util/qht.c:809 (test-qht+0x45f33)
espressif#11 qht_iter ../util/qht.c:821 (test-qht+0x45f33)
espressif#12 iter_check ../tests/unit/test-qht.c:121 (test-qht+0xe473)
espressif#13 qht_do_test ../tests/unit/test-qht.c:202 (test-qht+0xe473)
espressif#14 qht_test ../tests/unit/test-qht.c:240 (test-qht+0xe7c1)
espressif#15 test_default ../tests/unit/test-qht.c:246 (test-qht+0xe828)
espressif#16 <null> <null> (libglib-2.0.so.0+0x7daed)
espressif#17 <null> <null> (libglib-2.0.so.0+0x7d80a)
espressif#18 <null> <null> (libglib-2.0.so.0+0x7d80a)
espressif#19 g_test_run_suite <null> (libglib-2.0.so.0+0x7dfe9)
espressif#20 g_test_run <null> (libglib-2.0.so.0+0x7e055)
espressif#21 main ../tests/unit/test-qht.c:259 (test-qht+0xd2c6)
espressif#22 __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 (libc.so.6+0x29d8f)
espressif#23 __libc_start_main_impl ../csu/libc-start.c:392 (libc.so.6+0x29e3f)
espressif#24 _start <null> (test-qht+0xdb44)
Signed-off-by: Emilio Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230111151628.320011-5-cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230124180127.1881110-30-alex.bennee@linaro.org>
igrr
pushed a commit
that referenced
this issue
Dec 5, 2023
If there is a pending DMA operation during ide_bus_reset(), the fact
that the IDEState is already reset before the operation is canceled
can be problematic. In particular, ide_dma_cb() might be called and
then use the reset IDEState which contains the signature after the
reset. When used to construct the IO operation this leads to
ide_get_sector() returning 0 and nsector being 1. This is particularly
bad, because a write command will thus destroy the first sector which
often contains a partition table or similar.
Traces showing the unsolicited write happening with IDEState
0x5595af6949d0 being used after reset:
> ahci_port_write ahci(0x5595af6923f0)[0]: port write [reg:PxSCTL] @ 0x2c: 0x00000300
> ahci_reset_port ahci(0x5595af6923f0)[0]: reset port
> ide_reset IDEstate 0x5595af6949d0
> ide_reset IDEstate 0x5595af694da8
> ide_bus_reset_aio aio_cancel
> dma_aio_cancel dbs=0x7f64600089a0
> dma_blk_cb dbs=0x7f64600089a0 ret=0
> dma_complete dbs=0x7f64600089a0 ret=0 cb=0x5595acd40b30
> ahci_populate_sglist ahci(0x5595af6923f0)[0]
> ahci_dma_prepare_buf ahci(0x5595af6923f0)[0]: prepare buf limit=512 prepared=512
> ide_dma_cb IDEState 0x5595af6949d0; sector_num=0 n=1 cmd=DMA WRITE
> dma_blk_io dbs=0x7f6420802010 bs=0x5595ae2c6c30 offset=0 to_dev=1
> dma_blk_cb dbs=0x7f6420802010 ret=0
> (gdb) p *qiov
> $11 = {iov = 0x7f647c76d840, niov = 1, {{nalloc = 1, local_iov = {iov_base = 0x0,
> iov_len = 512}}, {__pad = "\001\000\000\000\000\000\000\000\000\000\000",
> size = 512}}}
> (gdb) bt
> #0 blk_aio_pwritev (blk=0x5595ae2c6c30, offset=0, qiov=0x7f6420802070, flags=0,
> cb=0x5595ace6f0b0 <dma_blk_cb>, opaque=0x7f6420802010)
> at ../block/block-backend.c:1682
> #1 0x00005595ace6f185 in dma_blk_cb (opaque=0x7f6420802010, ret=<optimized out>)
> at ../softmmu/dma-helpers.c:179
> #2 0x00005595ace6f778 in dma_blk_io (ctx=0x5595ae0609f0,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> io_func=io_func@entry=0x5595ace6ee30 <dma_blk_write_io_func>,
> io_func_opaque=io_func_opaque@entry=0x5595ae2c6c30,
> cb=0x5595acd40b30 <ide_dma_cb>, opaque=0x5595af6949d0,
> dir=DMA_DIRECTION_TO_DEVICE) at ../softmmu/dma-helpers.c:244
> #3 0x00005595ace6f90a in dma_blk_write (blk=0x5595ae2c6c30,
> sg=sg@entry=0x5595af694d00, offset=offset@entry=0, align=align@entry=512,
> cb=cb@entry=0x5595acd40b30 <ide_dma_cb>, opaque=opaque@entry=0x5595af6949d0)
> at ../softmmu/dma-helpers.c:280
> #4 0x00005595acd40e18 in ide_dma_cb (opaque=0x5595af6949d0, ret=<optimized out>)
> at ../hw/ide/core.c:953
> #5 0x00005595ace6f319 in dma_complete (ret=0, dbs=0x7f64600089a0)
> at ../softmmu/dma-helpers.c:107
> #6 dma_blk_cb (opaque=0x7f64600089a0, ret=0) at ../softmmu/dma-helpers.c:127
> #7 0x00005595ad12227d in blk_aio_complete (acb=0x7f6460005b10)
> at ../block/block-backend.c:1527
> #8 blk_aio_complete (acb=0x7f6460005b10) at ../block/block-backend.c:1524
> #9 blk_aio_write_entry (opaque=0x7f6460005b10) at ../block/block-backend.c:1594
> #10 0x00005595ad258cfb in coroutine_trampoline (i0=<optimized out>,
> i1=<optimized out>) at ../util/coroutine-ucontext.c:177
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: simon.rowe@nutanix.com
Message-ID: <20230906130922.142845-1-f.ebner@proxmox.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit 7d75120)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I tried to execute the 'scan' example from the idf package. It gets stucked at:
.check_dport_access_end () at /home/max/esp-idf/components/esp32/./dport_panic_highint_hdl.S:181With output message:
I (1044) wifi: wifi firmware version: b3258e0I (1044) wifi: config NVS flash: enabledI (1044) wifi: config nano formating: disabledI (1054) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSEI (1064) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSED (1084) nvs: nvs_open_from_partition nvs.net80211 1Funny thing is, that that it doesn't stuck always at the same point, but always during nvs_set or nvs_get. Do we have a racecondition here?
Is wifi code already working in this qemu port?
Best regards
The text was updated successfully, but these errors were encountered: