Merge branch 'Rigid3D-master'

resources/definitions/rigid3d_zero2.def.json

@@ -0,0 +1,130 @@
+{
+    "id": "rigid3d_zero2",
+    "name": "Rigid3D Zero2",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Rigid3D",
+        "manufacturer": "Rigid3D",
+        "category": "Other",
+        "has_materials": false,
+        "file_formats": "text/x-gcode",
+        "platform": "rigid3d_zero2_platform.stl",
+        "platform_offset": [ 5, 0, -35]
+    },
+    "overrides": {
+        "machine_name": { "default_value": "Rigid3D Zero2" },
+        "machine_head_with_fans_polygon": { 
+            "default_value": [[ 30, 30], [ 30, 70], [ 30, 70], [ 30, 30]] 
+        },
+        "z_seam_type": {
+            "default_value": "random"
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 0.8
+        },
+        "top_bottom_thickness": {
+            "default_value": 0.8
+        },
+        "xy_offset": {
+             "default_value": -0.2
+        },
+        "material_print_temperature": {
+            "value": 235
+        },
+        "material_bed_temperature": {
+            "default_value": 100
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_layer_0": {
+            "value": 15
+        },
+        "speed_tarvel": {
+            "value": 100
+        },        
+        "support_enable": {
+            "default_value": false
+        },
+        "infill_sparse_density": {
+            "default_value": 15
+        },
+        "infill_pattern": {
+            "default_value": "lines", 
+            "value": "lines"             
+        },
+        "retraction_amount": {
+            "default_value": 1
+        },
+        "machine_width": {
+            "default_value": 200
+        },
+        "machine_height": {
+            "default_value": 200
+        },
+        "machine_depth": {
+            "default_value": 200
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "gantry_height": {
+            "default_value": 25
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "cool_fan_enabled": {
+            "default_value": false
+        },
+        "cool_fan_speed": {
+            "default_value": 50,
+            "value": 50
+        },
+        "cool_fan_speed_min": {
+            "default_value": 0
+        },
+        "cool_fan_full_at_height": {
+            "default_value": 1.0,
+            "value": 1.0
+        },
+        "support_z_distance": {
+            "default_value": 0.2
+        },
+        "support_interface_enable": {
+            "default_value": true
+        },        
+        "support_interface_height": {
+            "default_value": 0.8
+        }, 
+        "support_interface_density": {
+            "default_value": 70
+        },        
+        "support_interface_pattern": {
+            "default_value": "grid"
+        },        
+        "machine_start_gcode": {
+            "default_value": "G21\nG28 ; Home extruder\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X100 Y100 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"
+        },
+        "machine_end_gcode": {
+            "default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"
+        }
+    }
+}