Optimise 0.4mm profiles for CPEP, PC and TPU

These optimisations should only remove settings that are exactly equal to the parent profile. Support interface settings are an exception, since they were defining non-existing settings in the original profiles. The stand-by temperature is also an exception, since the stand-by temperature of the material profile is set in stone because of firmware.

Contributes to issue CURA-3650.

resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg

@@ -1,95 +1,50 @@
-[general]
-version = 2
-name = Draft Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = draft
-material = generic_cpe_plus_ultimaker3_AA_0.4
-weight = -2
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 1
-cool_fan_speed_max = 80
-cool_min_layer_time = 5
-cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.2
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = True
-prime_tower_size = 17
-prime_tower_wipe_enabled = True
-retraction_amount = 7
-retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 0.2
-retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
-skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 50
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 65 / 50)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 50 / 50)
-speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1
+[general]
+version = 2
+name = Draft Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = draft
+material = generic_cpe_plus_ultimaker3_AA_0.4
+weight = -2
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+cool_fan_speed_max = 80
+cool_min_speed = 5
+infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_print = 25
+layer_height = 0.2
+machine_min_cool_heat_time_window = 15
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = True
+prime_tower_size = 17
+prime_tower_wipe_enabled = True
+retraction_combing = off
+retraction_extrusion_window = 1
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+speed_layer_0 = 20
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 65 / 50)
+speed_travel = 250
+speed_wall = =math.ceil(speed_print * 50 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
+support_bottom_distance = =support_z_distance
+support_z_distance = =layer_height
+travel_avoid_distance = 3
+wall_0_inset = 0
+wall_thickness = 1

resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg

@@ -1,95 +1,49 @@
-[general]
-version = 2
-name = Fast Print
-definition = ultimaker3
-
-[metadata]
-type = quality
-quality_type = fast
-material = generic_cpe_plus_ultimaker3_AA_0.4
-weight = -1
-
-[values]
-acceleration_enabled = True
-acceleration_infill = =acceleration_print
-acceleration_layer_0 = =acceleration_topbottom
-acceleration_prime_tower = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_print = 4000
-acceleration_support = =math.ceil(acceleration_print * 2000 / 4000)
-acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_topbottom
-acceleration_topbottom = =math.ceil(acceleration_print * 500 / 4000)
-acceleration_wall = =math.ceil(acceleration_print * 1000 / 4000)
-acceleration_wall_0 = =math.ceil(acceleration_wall * 500 / 1000)
-acceleration_wall_x = =acceleration_wall
-adhesion_type = brim
-brim_width = 7
-cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
-cool_fan_speed = 1
-cool_fan_speed_max = 80
-cool_min_layer_time = 5
-cool_min_speed = 6
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
-infill_overlap = 0
-infill_pattern = triangles
-infill_sparse_density = 20
-infill_wipe_dist = 0
-jerk_enabled = True
-jerk_infill = =jerk_print
-jerk_layer_0 = =jerk_topbottom
-jerk_prime_tower = =math.ceil(jerk_print * 15 / 25)
-jerk_print = 25
-jerk_support = =math.ceil(jerk_print * 15 / 25)
-jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_topbottom
-jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
-jerk_wall = =math.ceil(jerk_print * 10 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
-jerk_wall_x = =jerk_wall
-layer_height = 0.15
-layer_height_0 = =round(machine_nozzle_size / 1.5, 2)
-line_width = =machine_nozzle_size * 0.875
-machine_min_cool_heat_time_window = 15
-machine_nozzle_cool_down_speed = 0.9
-machine_nozzle_heat_up_speed = 1.4
-material_bed_temperature = 107
-material_initial_print_temperature = =material_print_temperature - 5
-material_final_print_temperature = =material_print_temperature - 10
-material_print_temperature = =default_material_print_temperature + 10
-material_print_temperature_layer_0 = =material_print_temperature
-material_standby_temperature = 100
-multiple_mesh_overlap = 0
-prime_tower_enable = True
-prime_tower_size = 17
-prime_tower_wipe_enabled = True
-retraction_amount = 7
-retraction_combing = off
-retraction_count_max = 25
-retraction_extrusion_window = 1
-retraction_hop = 0.2
-retraction_hop_enabled = False
-retraction_hop_only_when_collides = True
-skin_overlap = 20
-speed_infill = =speed_print
-speed_layer_0 = 20
-speed_prime_tower = =speed_topbottom
-speed_print = 45
-speed_support = =speed_wall_0
-speed_support_interface = =speed_topbottom
-speed_topbottom = =math.ceil(speed_print * 55 / 45)
-speed_travel = 250
-speed_wall = =math.ceil(speed_print * 45 / 45)
-speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-speed_wall_x = =speed_wall
-support_angle = 60
-support_bottom_distance = =support_z_distance
-support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
-support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height
-top_bottom_thickness = 1.2
-travel_avoid_distance = 3
-travel_compensate_overlapping_walls_enabled = True
-wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.3 / 0.35, 2)
-wall_thickness = 1.3
+[general]
+version = 2
+name = Fast Print
+definition = ultimaker3
+
+[metadata]
+type = quality
+quality_type = fast
+material = generic_cpe_plus_ultimaker3_AA_0.4
+weight = -1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+cool_fan_speed_max = 80
+cool_min_speed = 6
+infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_wipe_dist = 0
+jerk_enabled = True
+jerk_print = 25
+layer_height = 0.15
+machine_min_cool_heat_time_window = 15
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = True
+prime_tower_size = 17
+prime_tower_wipe_enabled = True
+retraction_combing = off
+retraction_extrusion_window = 1
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+speed_layer_0 = 20
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 55 / 45)
+speed_travel = 250
+speed_wall = =math.ceil(speed_print * 45 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_bottom_distance = =support_z_distance
+support_z_distance = =layer_height
+travel_avoid_distance = 3
+wall_0_inset = 0