Merge branch 'master' of github.com:Ultimaker/Cura

cura/CuraApplication.py

@@ -109,6 +109,10 @@ class ResourceTypes:
     Q_ENUMS(ResourceTypes)
 
     def __init__(self):
+        # this list of dir names will be used by UM to detect an old cura directory
+        for dir_name in ["extruders", "machine_instances", "materials", "plugins", "quality", "user", "variants"]:
+            Resources.addExpectedDirNameInData(dir_name)
+
         Resources.addSearchPath(os.path.join(QtApplication.getInstallPrefix(), "share", "cura", "resources"))
         if not hasattr(sys, "frozen"):
             Resources.addSearchPath(os.path.join(os.path.abspath(os.path.dirname(__file__)), "..", "resources"))

resources/definitions/imade3d_jellybox.def.json

@@ -32,7 +32,7 @@
         "machine_center_is_zero": { "default_value": false },
         "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
         "machine_start_gcode": {
-            "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n;              Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n;             sliced for :  {machine_name}\n;        nozzle diameter :  {machine_nozzle_size}\n;      filament diameter :  {material_diameter}\n;           layer height :  {layer_height}\n;       1st layer height :  {layer_height_0}\n;             line width :  {line_width}\n;  outer wall wipe dist. :  {wall_0_wipe_dist}\n;      infill line width :  {infill_line_width}\n;         wall thickness :  {wall_thickness}\n;          top thickness :  {top_thickness}\n;       bottom thickness :  {bottom_thickness}\n;         infill density :  {infill_sparse_density}\n;         infill pattern :  {infill_pattern}\n;      print temperature :  {material_print_temperature}\n;  1st layer print temp. :  {material_print_temperature_layer_0}\n; heated bed temperature :  {material_bed_temperature}\n;    1st layer bed temp. :  {material_bed_temperature_layer_0}\n;      regular fan speed :  {cool_fan_speed_min}\n;          max fan speed :  {cool_fan_speed_max}\n;     retraction amount  :  {retraction_amount}\n;   retr. retract speed  :  {retraction_retract_speed}\n;     retr. prime speed  :  {retraction_prime_speed}\n;   build plate adhesion :  {adhesion_type}\n;                support ?  {support_enable}\n;             spiralized ?  {magic_spiralize}\n\nM117 Preparing        ;write Preparing\nM140 S{material_bed_temperature_layer_0}              ;set bed temperature and move on\nM104 S{material_print_temperature_layer_0}             ;set extruder temperature and move on\nM206 X10.0 Y0.0       ;set x homing offset for default bed leveling\nG21                   ;metric values\nG90                   ;absolute positioning\nM107                  ;start with the fan off\nM82                   ;set extruder to absolute mode\nG28                   ;home all axes\nM203 Z4               ;slow Z speed down for greater accuracy when probing\nG29                   ;auto bed leveling procedure\nM203 Z7               ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0}              ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0}             ;wait for the extruder to reach desired temperature\nG92 E0                ;reset the extruder position\nG1 F1500 E15          ;extrude 15mm of feed stock\nG92 E0                ;reset the extruder position again\nM117 Print starting   ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
+            "default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n;              Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n;             sliced for :  {machine_name}\n;        nozzle diameter :  {machine_nozzle_size}\n;      filament diameter :  {material_diameter}\n;           layer height :  {layer_height}\n;       1st layer height :  {layer_height_0}\n;             line width :  {line_width}\n;  outer wall wipe dist. :  {wall_0_wipe_dist}\n;      infill line width :  {infill_line_width}\n;         wall thickness :  {wall_thickness}\n;          top thickness :  {top_thickness}\n;       bottom thickness :  {bottom_thickness}\n;         infill density :  {infill_sparse_density}\n;         infill pattern :  {infill_pattern}\n;      print temperature :  {material_print_temperature}\n;  1st layer print temp. :  {material_print_temperature_layer_0}\n; heated bed temperature :  {material_bed_temperature}\n;    1st layer bed temp. :  {material_bed_temperature_layer_0}\n;      regular fan speed :  {cool_fan_speed_min}\n;          max fan speed :  {cool_fan_speed_max}\n;     retraction amount  :  {retraction_amount}\n;   retr. retract speed  :  {retraction_retract_speed}\n;     retr. prime speed  :  {retraction_prime_speed}\n;   build plate adhesion :  {adhesion_type}\n;                support ?  {support_enable}\n;             spiralized ?  {magic_spiralize}\n\nM117 Preparing        ;write Preparing\nM140 S{material_bed_temperature_layer_0}              ;set bed temperature and move on\nM109 S{material_print_temperature}             ; wait for the extruder to reach desired temperature\nM206 X10.0 Y0.0       ;set x homing offset for default bed leveling\nG21                   ;metric values\nG90                   ;absolute positioning\nM107                  ;start with the fan off\nM82                   ;set extruder to absolute mode\nG28                   ;home all axes\nM203 Z4               ;slow Z speed down for greater accuracy when probing\nG29                   ;auto bed leveling procedure\nM203 Z7               ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0}              ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0}             ;wait for the extruder to reach desired temperature\nG92 E0                ;reset the extruder position\nG1 F1500 E15          ;extrude 15mm of feed stock\nG92 E0                ;reset the extruder position again\nM117 Print starting   ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
         },
         "machine_end_gcode": {
             "default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________"

resources/definitions/rigid3d_zero2.def.json

@@ -0,0 +1,130 @@
+{
+    "id": "rigid3d_zero2",
+    "name": "Rigid3D Zero2",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Rigid3D",
+        "manufacturer": "Rigid3D",
+        "category": "Other",
+        "has_materials": false,
+        "file_formats": "text/x-gcode",
+        "platform": "rigid3d_zero2_platform.stl",
+        "platform_offset": [ 5, 0, -35]
+    },
+    "overrides": {
+        "machine_name": { "default_value": "Rigid3D Zero2" },
+        "machine_head_with_fans_polygon": { 
+            "default_value": [[ 30, 30], [ 30, 70], [ 30, 70], [ 30, 30]] 
+        },
+        "z_seam_type": {
+            "default_value": "random"
+        },
+        "machine_heated_bed": {
+            "default_value": true
+        },
+        "layer_height": {
+            "default_value": 0.2
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "wall_thickness": {
+            "default_value": 0.8
+        },
+        "top_bottom_thickness": {
+            "default_value": 0.8
+        },
+        "xy_offset": {
+             "default_value": -0.2
+        },
+        "material_print_temperature": {
+            "value": 235
+        },
+        "material_bed_temperature": {
+            "default_value": 100
+        },
+        "material_diameter": {
+            "default_value": 1.75
+        },
+        "speed_print": {
+            "default_value": 40
+        },
+        "speed_layer_0": {
+            "value": 15
+        },
+        "speed_tarvel": {
+            "value": 100
+        },        
+        "support_enable": {
+            "default_value": false
+        },
+        "infill_sparse_density": {
+            "default_value": 15
+        },
+        "infill_pattern": {
+            "default_value": "lines", 
+            "value": "lines"             
+        },
+        "retraction_amount": {
+            "default_value": 1
+        },
+        "machine_width": {
+            "default_value": 200
+        },
+        "machine_height": {
+            "default_value": 200
+        },
+        "machine_depth": {
+            "default_value": 200
+        },
+        "machine_center_is_zero": {
+            "default_value": false
+        },
+        "machine_nozzle_size": {
+            "default_value": 0.4
+        },
+        "gantry_height": {
+            "default_value": 25
+        },
+        "machine_gcode_flavor": {
+            "default_value": "RepRap"
+        },
+        "cool_fan_enabled": {
+            "default_value": false
+        },
+        "cool_fan_speed": {
+            "default_value": 50,
+            "value": 50
+        },
+        "cool_fan_speed_min": {
+            "default_value": 0
+        },
+        "cool_fan_full_at_height": {
+            "default_value": 1.0,
+            "value": 1.0
+        },
+        "support_z_distance": {
+            "default_value": 0.2
+        },
+        "support_interface_enable": {
+            "default_value": true
+        },        
+        "support_interface_height": {
+            "default_value": 0.8
+        }, 
+        "support_interface_density": {
+            "default_value": 70
+        },        
+        "support_interface_pattern": {
+            "default_value": "grid"
+        },        
+        "machine_start_gcode": {
+            "default_value": "G21\nG28 ; Home extruder\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X100 Y100 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"
+        },
+        "machine_end_gcode": {
+            "default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"
+        }
+    }
+}

resources/qml/Sidebar.qml

@@ -407,14 +407,81 @@ Rectangle
             }
         }
         ExclusiveGroup { id: modeMenuGroup; }
-        ListView{
-            id: modesList
-            property var index: 0
-            model: modesListModel
-            delegate: wizardDelegate
-            anchors.top: parent.top
-            anchors.left: parent.left
-            width: parent.width
+
+        Text
+        {
+            id: toggleLeftText
+            anchors.right: modeToggleSwitch.left
+            anchors.rightMargin: UM.Theme.getSize("toggle_button_text_anchoring_margin").width
+            anchors.verticalCenter: parent.verticalCenter
+            text: ""
+            color: UM.Theme.getColor("toggle_active_text")
+            font: UM.Theme.getFont("default")
+
+            MouseArea
+            {
+                anchors.fill: parent
+                onClicked:
+                {
+                    modeToggleSwitch.checked = false;
+                }
+
+                Component.onCompleted:
+                {
+                    clicked.connect(modeToggleSwitch.clicked)
+                }
+            }
+        }
+
+        Switch
+        {
+            id: modeToggleSwitch
+            checked: false
+            anchors.right: toggleRightText.left
+            anchors.rightMargin: UM.Theme.getSize("toggle_button_text_anchoring_margin").width
+            anchors.verticalCenter: parent.verticalCenter
+
+            onClicked:
+            {
+                var index = 0;
+                if (checked)
+                {
+                    index = 1;
+                }
+                updateActiveMode(index);
+            }
+
+            function updateActiveMode(index)
+            {
+                base.currentModeIndex = index;
+                UM.Preferences.setValue("cura/active_mode", index);
+            }
+
+            style: UM.Theme.styles.toggle_button
+        }
+
+        Text
+        {
+            id: toggleRightText
+            anchors.right: parent.right
+            anchors.verticalCenter: parent.verticalCenter
+            text: ""
+            color: UM.Theme.getColor("toggle_active_text")
+            font: UM.Theme.getFont("default")
+
+            MouseArea
+            {
+                anchors.fill: parent
+                onClicked:
+                {
+                    modeToggleSwitch.checked = true;
+                }
+
+                Component.onCompleted:
+                {
+                    clicked.connect(modeToggleSwitch.clicked)
+                }
+            }
         }
     }
 
@@ -541,10 +608,14 @@ Rectangle
         })
         sidebarContents.push({ "item": modesListModel.get(base.currentModeIndex).item, "immediate": true });
 
-        var index = parseInt(UM.Preferences.getValue("cura/active_mode"))
-        if(index)
+        toggleLeftText.text = modesListModel.get(0).text;
+        toggleRightText.text = modesListModel.get(1).text;
+
+        var index = parseInt(UM.Preferences.getValue("cura/active_mode"));
+        if (index)
         {
             currentModeIndex = index;
+            modeToggleSwitch.checked = index > 0;
         }
     }
 
@@ -567,4 +638,4 @@ Rectangle
         watchedProperties: [ "value" ]
         storeIndex: 0
     }
-}
+}

resources/themes/cura/styles.qml

@@ -8,6 +8,44 @@ import QtQuick.Controls.Styles 1.1
 import UM 1.1 as UM
 
 QtObject {
+    property Component toggle_button: Component {
+        SwitchStyle {
+            groove: Rectangle {
+                implicitWidth: UM.Theme.getSize("toggle_button_background_implicit_size").width
+                implicitHeight: UM.Theme.getSize("toggle_button_background_implicit_size").height
+                radius: UM.Theme.getSize("toggle_button_radius").width
+                border.color: {
+                    if (control.pressed || (control.checkable && control.checked)) {
+                        return UM.Theme.getColor("sidebar_header_active");
+                    } else if(control.hovered) {
+                        return UM.Theme.getColor("sidebar_header_hover");
+                    } else {
+                        return UM.Theme.getColor("sidebar_header_bar");
+                    }
+                }
+                Behavior on border.color { ColorAnimation { duration: 50; } }
+                border.width: 1
+            }
+
+            handle: Rectangle {
+                implicitWidth: UM.Theme.getSize("toggle_button_knob_implicit_size").width
+                implicitHeight: UM.Theme.getSize("toggle_button_knob_implicit_size").height
+                radius: UM.Theme.getSize("toggle_button_radius").width
+
+                color: {
+                    if (control.pressed || (control.checkable && control.checked)) {
+                        return UM.Theme.getColor("sidebar_header_active");
+                    } else if(control.hovered) {
+                        return UM.Theme.getColor("sidebar_header_hover");
+                    } else {
+                        return UM.Theme.getColor("sidebar_header_bar");
+                    }
+                }
+                Behavior on color { ColorAnimation { duration: 50; } }
+            }
+        }
+    }
+
     property Component sidebar_header_button: Component {
         ButtonStyle {
             background: Rectangle {

resources/themes/cura/theme.json

@@ -319,6 +319,11 @@
 
         "infill_button_margin": [0.5, 0.5],
 
-        "jobspecs_line": [2.0, 2.0]
+        "jobspecs_line": [2.0, 2.0],
+
+        "toggle_button_text_anchoring_margin": [1.0, 1.0],
+        "toggle_button_radius": [1.0, 1.0],
+        "toggle_button_background_implicit_size": [2.0, 1.0],
+        "toggle_button_knob_implicit_size": [1.0, 1.0]
     }
 }