samples/shields: x-nucleo-iks4a1: Add lis2dux12 accel and temp test

Add sample display for lis2duxs12 accel and temp sensors.

(cherry picked from commit 02fa47f)

Original-Signed-off-by: Armando Visconti <armando.visconti@st.com>
GitOrigin-RevId: 02fa47f
Cr-Build-Id: 8727359303490889121
Cr-Build-Url: https://cr-buildbucket.appspot.com/build/8727359303490889121
Copybot-Job-Name: zephyr-main-copybot-downstream
Change-Id: I7f06ce5630895e083460db028a8d7c4c1940a0e3
Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/zephyr/+/6128080
Commit-Queue: ChromeOS Prod (Robot) <chromeos-ci-prod@chromeos-bot.iam.gserviceaccount.com>
Tested-by: ChromeOS Prod (Robot) <chromeos-ci-prod@chromeos-bot.iam.gserviceaccount.com>
Bot-Commit: ChromeOS Prod (Robot) <chromeos-ci-prod@chromeos-bot.iam.gserviceaccount.com>

samples/shields/x_nucleo_iks4a1/standard/README.rst

@@ -16,6 +16,7 @@ periodically reads and displays data from the shield sensors:
 - LSM6DSO16IS 6-Axis acceleration and angular velocity
 - LPS22DF ambient temperature and atmospheric pressure
 - LIS2MDL 3-Axis magnetic field intensity
+- LIS2DUXS12 3-Axis acceleration
 
 Requirements
 ************
@@ -53,10 +54,14 @@ Sample Output
     LSM6DSV16X: GYro (dps): x: -0.000, y: 0.000, z: 0.005
     LPS22DF: Temperature: 25.2 C
     LPS22DF: Pressure:98.121 kpa
+    LIS2DUXS12: Accel (m.s-2): x: 0.689, y: -0.306, z: 9.571
+    LIS2DUXS12: Temperature: 23.9 C
+
     10:: lis2mdl trig 1839
     10:: lsm6dso16is acc trig 3892
     10:: lsm6dsv16x acc trig 4412
     10:: lps22df trig 174
+    10:: lis2duxs12 acc trig 3681
 
     <updated endlessly every 2 seconds>
 

samples/shields/x_nucleo_iks4a1/standard/prj.conf

@@ -5,8 +5,10 @@ CONFIG_SENSOR=y
 CONFIG_SENSOR_LOG_LEVEL_DBG=y
 CONFIG_LIS2MDL_TRIGGER_OWN_THREAD=y
 CONFIG_LPS2XDF_TRIGGER_OWN_THREAD=y
-CONFIG_LSM6DSO16IS_TRIGGER_OWN_THREAD=y
+CONFIG_LSM6DSO16IS_TRIGGER_NONE=y
 CONFIG_LSM6DSO16IS_ENABLE_TEMP=y
 CONFIG_LSM6DSV16X_TRIGGER_OWN_THREAD=y
 CONFIG_LSM6DSV16X_ENABLE_TEMP=y
+CONFIG_LIS2DUX12_TRIGGER_OWN_THREAD=y
+CONFIG_LIS2DUX12_ENABLE_TEMP=y
 CONFIG_CBPRINTF_FP_SUPPORT=y

samples/shields/x_nucleo_iks4a1/standard/src/main.c

@@ -54,6 +54,17 @@ static void lsm6dsv16x_acc_trig_handler(const struct device *dev,
 }
 #endif
 
+#ifdef CONFIG_LIS2DUX12_TRIGGER
+static int lis2duxs12_acc_trig_cnt;
+
+static void lis2duxs12_acc_trig_handler(const struct device *dev,
+				     const struct sensor_trigger *trig)
+{
+	sensor_sample_fetch_chan(dev, SENSOR_CHAN_ALL);
+	lis2duxs12_acc_trig_cnt++;
+}
+#endif
+
 static void lis2mdl_config(const struct device *lis2mdl)
 {
 	struct sensor_value odr_attr;
@@ -214,6 +225,37 @@ static void lps22df_config(const struct device *lps22df)
 #endif
 }
 
+static void lis2duxs12_config(const struct device *lis2duxs12)
+{
+	struct sensor_value odr_attr, fs_attr;
+
+	/* set LSM6DSV16X accel sampling frequency to 200 Hz */
+	odr_attr.val1 = 200;
+	odr_attr.val2 = 0;
+
+	if (sensor_attr_set(lis2duxs12, SENSOR_CHAN_ACCEL_XYZ,
+			    SENSOR_ATTR_SAMPLING_FREQUENCY, &odr_attr) < 0) {
+		printk("Cannot set sampling frequency for LSM6DSV16X accel\n");
+		return;
+	}
+
+	sensor_g_to_ms2(16, &fs_attr);
+
+	if (sensor_attr_set(lis2duxs12, SENSOR_CHAN_ACCEL_XYZ,
+			    SENSOR_ATTR_FULL_SCALE, &fs_attr) < 0) {
+		printk("Cannot set fs for LSM6DSV16X accel\n");
+		return;
+	}
+
+#ifdef CONFIG_LIS2DUX12_TRIGGER
+	struct sensor_trigger trig;
+
+	trig.type = SENSOR_TRIG_DATA_READY;
+	trig.chan = SENSOR_CHAN_ACCEL_XYZ;
+	sensor_trigger_set(lis2duxs12, &trig, lis2duxs12_acc_trig_handler);
+#endif
+}
+
 int main(void)
 {
 	struct sensor_value lis2mdl_magn[3], lis2mdl_temp, lps22df_press, lps22df_temp;
@@ -225,10 +267,12 @@ int main(void)
 	struct sensor_value lsm6dsv16x_temp;
 #endif
 	struct sensor_value lsm6dsv16x_xl[3], lsm6dsv16x_gy[3];
+	struct sensor_value lis2duxs12_xl[3], lis2duxs12_temp;
 	const struct device *const lis2mdl = DEVICE_DT_GET_ONE(st_lis2mdl);
 	const struct device *const lsm6dso16is = DEVICE_DT_GET_ONE(st_lsm6dso16is);
 	const struct device *const lsm6dsv16x = DEVICE_DT_GET_ONE(st_lsm6dsv16x);
 	const struct device *const lps22df = DEVICE_DT_GET_ONE(st_lps22df);
+	const struct device *const lis2duxs12 = DEVICE_DT_GET_ONE(st_lis2duxs12);
 	int cnt = 1;
 
 	if (!device_is_ready(lsm6dso16is)) {
@@ -247,11 +291,16 @@ int main(void)
 		printk("%s: device not ready.\n", lps22df->name);
 		return 0;
 	}
+	if (!device_is_ready(lis2duxs12)) {
+		printk("%s: device not ready.\n", lis2duxs12->name);
+		return 0;
+	}
 
 	lis2mdl_config(lis2mdl);
 	lsm6dso16is_config(lsm6dso16is);
 	lsm6dsv16x_config(lsm6dsv16x);
 	lps22df_config(lps22df);
+	lis2duxs12_config(lis2duxs12);
 
 	while (1) {
 		/* Get sensor samples */
@@ -280,6 +329,12 @@ int main(void)
 			return 0;
 		}
 #endif
+#ifndef CONFIG_LIS2DUX12_TRIGGER
+		if (sensor_sample_fetch(lis2duxs12) < 0) {
+			printf("LIS2DUXS12 XL Sensor sample update error\n");
+			return 0;
+		}
+#endif
 
 		/* Get sensor data */
 		sensor_channel_get(lis2mdl, SENSOR_CHAN_MAGN_XYZ, lis2mdl_magn);
@@ -298,6 +353,8 @@ int main(void)
 		sensor_channel_get(lps22df, SENSOR_CHAN_PRESS, &lps22df_press);
 		sensor_channel_get(lps22df, SENSOR_CHAN_AMBIENT_TEMP, &lps22df_temp);
 
+		sensor_channel_get(lis2duxs12, SENSOR_CHAN_ACCEL_XYZ, lis2duxs12_xl);
+		sensor_channel_get(lis2duxs12, SENSOR_CHAN_DIE_TEMP, &lis2duxs12_temp);
 		/* Display sensor data */
 
 		/* Erase previous */
@@ -349,6 +406,14 @@ int main(void)
 		printf("LPS22DF: Temperature: %.1f C\n", sensor_value_to_double(&lps22df_temp));
 		printf("LPS22DF: Pressure:%.3f kpa\n", sensor_value_to_double(&lps22df_press));
 
+		printf("LIS2DUXS12: Accel (m.s-2): x: %.3f, y: %.3f, z: %.3f\n",
+			sensor_value_to_double(&lis2duxs12_xl[0]),
+			sensor_value_to_double(&lis2duxs12_xl[1]),
+			sensor_value_to_double(&lis2duxs12_xl[2]));
+
+		printf("LIS2DUXS12: Temperature: %.1f C\n",
+		       sensor_value_to_double(&lis2duxs12_temp));
+
 #if defined(CONFIG_LIS2MDL_TRIGGER)
 		printk("%d: lis2mdl trig %d\n", cnt, lis2mdl_trig_cnt);
 #endif
@@ -363,6 +428,9 @@ int main(void)
 #ifdef CONFIG_LPS2XDF_TRIGGER
 		printk("%d: lps22df trig %d\n", cnt, lps22df_trig_cnt);
 #endif
+#ifdef CONFIG_LIS2DUX12_TRIGGER
+		printk("%d:: lis2duxs12 acc trig %d\n", cnt, lis2duxs12_acc_trig_cnt);
+#endif
 
 		cnt++;
 		k_sleep(K_MSEC(2000));