Scan Skip channel and default tx_lock to ON.

[jiffyloose]

I want to say this is one of my favorite firmware versions. I also like aubs's version with the 10 lists and the ability to temporary skip a channel in the scan list.

Changing the tx_lock to default to be ON would be a better option that defaulting to OFF IMO. This way it going by bandplan then you can turn ON the others.

Let me know what you think.

-Jeff

[armel]

Hello,

Thank you for your message.
First of all, note that it's possible to temporary skip a channel during scan, whit my firmware too :) You can exclude a memory channel during the scan with a long press on M button.
About TXLock, I will take a look.

Armel F4HWN.

[jiffyloose]

Thanks for the response! I am enjoying your version even more now!

[armel]

@jiffyloose I've just tested the TXLock settings. As I thought, it's set to ON by default (this can be checked by resetting the transceiver with the Reset menu). Armel F4HWN.

[jiffyloose]

Oh my bad then. I am noticing it in chirp when I paste frequencies from radio reference. I did play around a bit and switched the order of the off on in the chirp python and then when I pasted stuff if defaulted to on. I looked at the debug log and when there is a “ missing” txlock iit defaults to off. Thanks for looking.

…

On Mon, Oct 7, 2024 at 8:30 PM Armel FAUVEAU ***@***.***> wrote: @jiffyloose <https://github.com/jiffyloose> I've just tested the TXLock settings. As I thought, it's set to ON by default (this can be checked by resetting the transceiver with the Reset menu). Armel F4HWN. — Reply to this email directly, view it on GitHub <#270 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEWSO3QPE73KVZQVIR4N6WDZ2MRSZAVCNFSM6AAAAABPQDJRMWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBXGQYDENQ> . You are receiving this because you were mentioned.Message ID: ***@***.*** .com>

[armel]

Okay, nice.
So it's an issue with the driver (Chirp).
Could you post an issue about it on the dedicated space?
That would be nice :)

Regards,

Armel F4HWN.

[jiffyloose]

You bet! Thanks for all you do.

…

On Mon, Oct 7, 2024 at 10:06 PM Armel FAUVEAU ***@***.***> wrote: Okay, nice. So it's an issue with the driver (Chirp). Could you post an issue about it on the dedicated space <https://github.com/armel/uv-k5-chirp-driver/issues>? That would be nice :) Regards, Armel F4HWN. — Reply to this email directly, view it on GitHub <#270 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEWSO3WXZDM56XVJ6GDY6ZDZ2M4Y7AVCNFSM6AAAAABPQDJRMWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOBXGQ2TQMQ> . You are receiving this because you were mentioned.Message ID: ***@***.*** .com>