Added short_component_pins to edb and parameters_values and polygon_data to Padstack Instances

_unittest/test_00_EDB.py

@@ -400,9 +400,13 @@ def test_49_get_padstack(self):
             assert pad.hole_offset_y is not None or False
             assert pad.hole_type is not None or False
             assert pad.pad_by_layer[pad.via_stop_layer].parameters is not None or False
+            assert pad.pad_by_layer[pad.via_stop_layer].parameters_values is not None or False
             assert pad.pad_by_layer[pad.via_stop_layer].offset_x is not None or False
             assert pad.pad_by_layer[pad.via_stop_layer].offset_y is not None or False
             assert isinstance(pad.pad_by_layer[pad.via_stop_layer].geometry_type, int)
+            polygon = pad.pad_by_layer[pad.via_stop_layer].polygon_data
+            if polygon:
+                assert polygon.GetBBox()
 
     def test_50_set_padstack(self):
         pad = self.edbapp.core_padstack.padstacks["C10N116"]
@@ -597,3 +601,7 @@ def test_75_primitives_area(self):
             assert self.edbapp.core_primitives.primitives[i].area(False) > 0
             assert self.edbapp.core_primitives.primitives[i].area(True) > 0
             i += 1
+
+    def test_76_short_component(self):
+        assert self.edbapp.core_components.short_component_pins("EU1", width=0.2e-3)
+        assert self.edbapp.core_components.short_component_pins("U10", ["2", "5"])

doc/source/API/Boundaries.rst

@@ -29,5 +29,6 @@ Example without NativeComponentObject:
    NativeComponentObject
    BoundaryObject
    FarFieldSetup
+   Matrix
 
 

doc/source/Resources/pyaedt_with_IDE.bat

@@ -33,6 +33,7 @@ if not exist "%APPDATA%\pyaedt_env_ide\" (
     "%APPDATA%\pyaedt_env_ide\Scripts\pip" install jupyterlab
     "%APPDATA%\pyaedt_env_ide\Scripts\pip" install spyder
     "%APPDATA%\pyaedt_env_ide\Scripts\pip" install ipython -U
+    "%APPDATA%\pyaedt_env_ide\Scripts\pip" install ipyvtklink
     call "%APPDATA%\pyaedt_env_ide\Scripts\python" "%APPDATA%\pyaedt_env_ide\Lib\site-packages\pyaedt\misc\aedtlib_personalib_install.py" %aedt_var%
 )
 if [%1%]==[-update] ( 

examples/05-Q3D/Q3D_Example.py

@@ -107,17 +107,23 @@
 
 q.create_setup(props={"AdaptiveFreq": "100MHz"})
 
+
 ###############################################################################
-# Create a Rectangular Plot
-# ~~~~~~~~~~~~~~~~~~~~~~~~~
-# This command creates a rectangular plot and a Data Table.
+# Get Curves for plot
+# ~~~~~~~~~~~~~~~~~~~
+# This command simplify the way you can get curves to be plotted.
 
 data_plot_self = q.matrices[0].get_sources_for_plot(get_self_terms=True, get_mutual_terms=False)
+data_plot_mutual = q.get_traces_for_plot(get_self_terms=False, get_mutual_terms=True)
+data_plot_self
+data_plot_mutual
 
+###############################################################################
+# Create a Rectangular Plot
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# This command creates a rectangular plot and a Data Table.
 q.post.create_rectangular_plot(expression=data_plot_self, context="Original")
 
-data_plot_mutual = q.get_traces_for_plot(get_self_terms=False, get_mutual_terms=True)
-
 q.post.create_rectangular_plot(expression=data_plot_mutual, context="Original", plot_type="Data Table")
 
 ###############################################################################

pyaedt/application/design_solutions.py

@@ -388,28 +388,28 @@
         "HFSS3DLayout": {
             "name": None,
             "options": None,
-            "report_type": None,
+            "report_type": "Standard",
             "default_setup": 29,
             "default_adaptive": None,
         },
         "SiwaveDC3DLayout": {
             "name": None,
             "options": None,
-            "report_type": None,
+            "report_type": "Standard",
             "default_setup": 40,
             "default_adaptive": None,
         },
         "SiwaveAC3DLayout": {
             "name": None,
             "options": None,
-            "report_type": None,
+            "report_type": "Standard",
             "default_setup": 41,
             "default_adaptive": None,
         },
         "LNA3DLayout": {
             "name": None,
             "options": None,
-            "report_type": None,
+            "report_type": "Standard",
             "default_setup": 42,
             "default_adaptive": None,
         },

pyaedt/edb_core/EDB_Data.py

@@ -1290,6 +1290,35 @@ def geometry_type(self, geom_type):
             params = [val, val, val]
         self._update_pad_parameters_parameters(geom_type=geom_type, params=params)
 
+    @property
+    def parameters_values(self):
+        """Parameters.
+
+        Returns
+        -------
+        list
+            List of parameters.
+        """
+        pad_values = self._padstack_methods.GetPadParametersValue(self._edb_padstack, self.layer_name, self.pad_type)
+        return [i.ToDouble() for i in pad_values.Item2]
+
+    @property
+    def polygon_data(self):
+        """Parameters.
+
+        Returns
+        -------
+        list
+            List of parameters.
+        """
+        try:
+            pad_values = self._padstack_methods.GetPolygonalPadParameters(
+                self._edb_padstack, self.layer_name, self.pad_type
+            )
+            return pad_values.Item1
+        except:
+            return
+
     @property
     def parameters(self):
         """Parameters.
@@ -2243,6 +2272,19 @@ def is_parallel_rlc(self):
                 return pair.IsParallel
         return None
 
+    @property
+    def center(self):
+        """Compute the component center.
+
+        Returns
+        -------
+        list
+        """
+        layinst = self.edbcomponent.GetLayout().GetLayoutInstance()
+        cmpinst = layinst.GetLayoutObjInstance(self.edbcomponent, None)
+        center = cmpinst.GetCenter()
+        return [center.X.ToDouble(), center.Y.ToDouble()]
+
     @property
     def pinlist(self):
         """Pins of Component.

pyaedt/edb_core/components.py

@@ -12,6 +12,7 @@
 from pyaedt.generic.constants import SourceType
 from pyaedt.edb_core.EDB_Data import EDBComponent
 from pyaedt.edb_core.padstack import EdbPadstacks
+from pyaedt.modeler.GeometryOperators import GeometryOperators
 
 try:
     import clr
@@ -1486,3 +1487,119 @@ def get_through_resistor_list(self, threshold=1):
                     through_comp_list.append(refdes)
 
         return through_comp_list
+
+    @aedt_exception_handler
+    def short_component_pins(self, component_name, pins_to_short=None, width=1e-3):
+        """Short pins of component with a trace.
+
+        Parameters
+        ----------
+        component_name : str
+            Name of the component.
+        pins_to_short : list, optional
+            List of pins to short. If `None`, all pins will be shorted.
+        width : float, optional
+            Short Trace width. It will be used in trace computation algorithm
+
+        Returns
+        -------
+        bool
+            ``True`` when successful, ``False`` when failed.
+
+        Examples
+        --------
+
+        >>> from pyaedt import Edb
+        >>> edbapp = Edb("myaedbfolder")
+        >>> edbapp.core_components.short_component_pins("J4A2", ["G4", "9", "3"])
+
+        """
+        component = self.components[component_name]
+        pins = component.pins
+        pins_list = []
+
+        component.center
+        for pin_name, pin in pins.items():
+            if pins_to_short:
+                if pin_name in pins_to_short:
+                    pins_list.append(pin)
+            else:
+                pins_list.append(pin)
+        positions_to_short = []
+        center = component.center
+        c = [center[0], center[1], 0]
+        delta_pins = []
+        w = width
+        for pin in pins_list:
+            placement_layer = pin.placement_layer
+            positions_to_short.append(pin.position)
+            pad = self._pedb.core_padstack.padstacks[pin.pin.GetPadstackDef().GetName()].pad_by_layer[placement_layer]
+            pars = pad.parameters_values
+            geom = pad.geometry_type
+            if geom < 6 and pars:
+                delta_pins.append(max(pars) + min(pars) / 2)
+                w = min(min(pars), w)
+            elif pars:
+                delta_pins.append(1.5 * pars[0])
+                w = min(pars[0], w)
+            elif pad.polygon_data:
+                bbox = pad.polygon_data.GetBBox()
+                lower = [bbox.Item1.X.ToDouble(), bbox.Item1.Y.ToDouble()]
+                upper = [bbox.Item2.X.ToDouble(), bbox.Item2.Y.ToDouble()]
+                pars = [abs(lower[0] - upper[0]), abs(lower[1] - upper[1])]
+                delta_pins.append(max(pars) + min(pars) / 2)
+                w = min(min(pars), w)
+            else:
+                delta_pins.append(1.5 * width)
+        i = 0
+
+        while i < len(positions_to_short) - 1:
+            p0 = []
+            p0.append([positions_to_short[i][0] - delta_pins[i], positions_to_short[i][1], 0])
+            p0.append([positions_to_short[i][0] + delta_pins[i], positions_to_short[i][1], 0])
+            p0.append([positions_to_short[i][0], positions_to_short[i][1] - delta_pins[i], 0])
+            p0.append([positions_to_short[i][0], positions_to_short[i][1] + delta_pins[i], 0])
+            p0.append([positions_to_short[i][0], positions_to_short[i][1], 0])
+            l0 = [
+                GeometryOperators.points_distance(p0[0], c),
+                GeometryOperators.points_distance(p0[1], c),
+                GeometryOperators.points_distance(p0[2], c),
+                GeometryOperators.points_distance(p0[3], c),
+                GeometryOperators.points_distance(p0[4], c),
+            ]
+            l0_min = l0.index(min(l0))
+            p1 = []
+            p1.append([positions_to_short[i + 1][0] - delta_pins[i + 1], positions_to_short[i + 1][1], 0])
+            p1.append([positions_to_short[i + 1][0] + delta_pins[i + 1], positions_to_short[i + 1][1], 0])
+            p1.append([positions_to_short[i + 1][0], positions_to_short[i + 1][1] - delta_pins[i + 1], 0])
+            p1.append([positions_to_short[i + 1][0], positions_to_short[i + 1][1] + delta_pins[i + 1], 0])
+            p1.append([positions_to_short[i + 1][0], positions_to_short[i + 1][1], 0])
+
+            l1 = [
+                GeometryOperators.points_distance(p1[0], c),
+                GeometryOperators.points_distance(p1[1], c),
+                GeometryOperators.points_distance(p1[2], c),
+                GeometryOperators.points_distance(p1[3], c),
+                GeometryOperators.points_distance(p1[4], c),
+            ]
+            l1_min = l1.index(min(l1))
+
+            trace_points = [positions_to_short[i]]
+
+            trace_points.append(p0[l0_min][:2])
+            trace_points.append(c[:2])
+            trace_points.append(p1[l1_min][:2])
+
+            trace_points.append(positions_to_short[i + 1])
+
+            path = self._pedb.core_primitives.Shape("polygon", points=trace_points)
+            self._pedb.core_primitives.create_path(
+                path,
+                layer_name=placement_layer,
+                net_name="short",
+                width=w,
+                start_cap_style="Flat",
+                end_cap_style="Flat",
+            )
+            i += 1
+        return True

pyaedt/edb_core/layout.py

@@ -439,8 +439,8 @@ def create_path(
             ``"Extended",`` and ``"Flat"``. The default is
             ``"Round"``.
         corner_style : str, optional
-            Style of the corner. Options are ``"Round"`` and
-            ``"Flat"``. The default is ``"Round"``.
+            Style of the corner. Options are ``"Round"``,
+            ``"Sharp"`` and ``"Mitered"``. The default is ``"Round"``.
 
         Returns
         -------
@@ -449,21 +449,24 @@ def create_path(
         """
         net = self._pedb.core_nets.find_or_create_net(net_name)
         if start_cap_style.lower() == "round":
-            start_cap_style = 0
+            start_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Round
         elif start_cap_style.lower() == "extended":
-            start_cap_style = 2
+            start_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Extended  # pragma: no cover
         else:
-            start_cap_style = 1
+            start_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Flat  # pragma: no cover
         if end_cap_style.lower() == "round":
-            end_cap_style = 0
+            end_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Round  # pragma: no cover
         elif end_cap_style.lower() == "extended":
-            end_cap_style = 2
+            end_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Extended  # pragma: no cover
         else:
-            end_cap_style = 1
+            end_cap_style = self._edb.Cell.Primitive.PathEndCapStyle.Flat
         if corner_style.lower() == "round":
-            corner_style = 0
+            corner_style = self._edb.Cell.Primitive.PathCornerStyle.RoundCorner
+        elif corner_style.lower() == "sharp":
+            corner_style = self._edb.Cell.Primitive.PathCornerStyle.SharpCorner  # pragma: no cover
         else:
-            corner_style = 1
+            corner_style = self._edb.Cell.Primitive.PathCornerStyle.MiterCorner  # pragma: no cover
+
         pointlists = [
             self._edb.Geometry.PointData(self._edb_value(i[0]), self._edb_value(i[1])) for i in path_list.points
         ]