Cervello is an acrylic keyboard case for Neuron and Schwann PCBs. The case is designed around the original Neuron plate profile, as a drop in for extra built PCBs.
The current case outlines need an update. The feet screws can contact the usb connector. A v2 update has been made, this repo just needs an update.
Hardware used for the case.
| Count | Name | Size | Source |
|---|---|---|---|
| 12 | Zinc-Plated Steel Countersunk Washer | M3 Screw Size, 3.2 mm ID, 10 mm OD | https://www.mcmaster.com/98424A200/ |
| 6 | Aluminum Female Threaded Hex Standoff | 6mm Hex, 10mm Long, M3 x 0.50 mm Thread | https://www.mcmaster.com/95947A036/ |
| 6 | 18-8 Stainless Steel Hex Drive Flat Head Screw | M3 x 0.5 mm Thread, 12 mm Long | https://www.mcmaster.com/92125A132/ |
| 6 | 18-8 Stainless Steel Hex Drive Flat Head Screw | M3 x 0.5 mm Thread, 8 mm Long | https://www.mcmaster.com/92125A128/ |
| 3 | 18-8 Stainless Steel Hex Drive Flat Head Screw | M3 x 0.5 Thread Size, 15mm Long | https://www.mcmaster.com/92125A103/ |
| 3 | 18-8 Stainless Steel Thin Hex Nut | M3 x 0.5 mm Thread | https://www.mcmaster.com/90710A030/ |
The case is designed to use 3mm acrylic, and can fit on a single 790 x 384mm sheet. The cervello.svg file can be directly uploaded to cutting services. Be sure to check dimensions, and you may need to adjust the orientation.
Outlines for each part are in the layers folder. Note that some parts are used multiple times. The case uses 2 top layers, and 3 mid layers.
🚧 Work in progress
