adding vindie s2

ports/espressif/boards/adafruit_vindie_s2/board.c

@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/adafruit_vindie_s2/mpconfigboard.h

@@ -0,0 +1,25 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Adafruit Vindie S2"
+#define MICROPY_HW_MCU_NAME         "ESP32S2"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO33)
+#define MICROPY_HW_NEOPIXEL_COUNT   (4)
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO18)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO11)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO12)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO21)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO45)
+
+#define DOUBLE_TAP_PIN (&pin_GPIO17)

ports/espressif/boards/adafruit_vindie_s2/mpconfigboard.mk

@@ -0,0 +1,16 @@
+USB_VID = 0x239A
+USB_PID = 0x8160
+USB_PRODUCT = "Adafruit Vindie S2"
+USB_MANUFACTURER = "Adafruit"
+
+IDF_TARGET = esp32s2
+
+CIRCUITPY_ESP_FLASH_SIZE = 4MB
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+
+CIRCUITPY_ESP_PSRAM_SIZE = 2MB
+CIRCUITPY_ESP_PSRAM_MODE = qio
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+CIRCUITPY_PARALLELDISPLAYBUS = 0

ports/espressif/boards/adafruit_vindie_s2/pins.c

@@ -0,0 +1,41 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_D0), MP_ROM_PTR(&pin_GPIO0) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_D12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_D11), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_FAN), MP_ROM_PTR(&pin_GPIO34) },
+    { MP_ROM_QSTR(MP_QSTR_D34), MP_ROM_PTR(&pin_GPIO34) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_D13), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_L), MP_ROM_PTR(&pin_GPIO18) },
+
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_D21), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_D45), MP_ROM_PTR(&pin_GPIO45) },
+
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO33) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) }
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);