Merge pull request #5661 from jepler/esp32s3-box

Add support for esp32s3-box

ports/espressif/boards/espressif_esp32s3_box/board.c

@@ -0,0 +1,66 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // USB
+    common_hal_never_reset_pin(&pin_GPIO19);
+    common_hal_never_reset_pin(&pin_GPIO20);
+
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif
+
+    // SPI Flash and RAM
+    common_hal_never_reset_pin(&pin_GPIO26);
+    common_hal_never_reset_pin(&pin_GPIO27);
+    common_hal_never_reset_pin(&pin_GPIO28);
+    common_hal_never_reset_pin(&pin_GPIO29);
+    common_hal_never_reset_pin(&pin_GPIO30);
+    common_hal_never_reset_pin(&pin_GPIO31);
+    common_hal_never_reset_pin(&pin_GPIO32);
+    common_hal_never_reset_pin(&pin_GPIO33);
+    common_hal_never_reset_pin(&pin_GPIO34);
+    common_hal_never_reset_pin(&pin_GPIO35);
+    common_hal_never_reset_pin(&pin_GPIO36);
+    common_hal_never_reset_pin(&pin_GPIO37);
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.h

@@ -0,0 +1,36 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "ESP32-S3-Box-2.5"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define CIRCUITPY_BOOT_BUTTON (&pin_GPIO0)
+
+#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")
+
+#define AUTORESET_DELAY_MS 500

ports/espressif/boards/espressif_esp32s3_box/mpconfigboard.mk

@@ -0,0 +1,17 @@
+USB_VID = 0x303A
+USB_PID = 0x7007
+USB_PRODUCT = "ESP32-S3-Box-2.5"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s3
+
+INTERNAL_FLASH_FILESYSTEM = 1
+LONGINT_IMPL = MPZ
+
+# The default queue depth of 16 overflows on release builds,
+# so increase it to 32.
+CFLAGS += -DCFG_TUD_TASK_QUEUE_SZ=32
+
+CIRCUITPY_ESP_FLASH_MODE=dio
+CIRCUITPY_ESP_FLASH_FREQ=80m
+CIRCUITPY_ESP_FLASH_SIZE=16MB

ports/espressif/boards/espressif_esp32s3_box/pins.c

@@ -0,0 +1,64 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    // First PMOD connector
+    { MP_ROM_QSTR(MP_QSTR_G9), MP_ROM_PTR(&pin_GPIO9) },
+
+    { MP_ROM_QSTR(MP_QSTR_U0TXD), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_G43), MP_ROM_PTR(&pin_GPIO43) },
+
+    { MP_ROM_QSTR(MP_QSTR_U0RXD), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_G44), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_CS), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_G10), MP_ROM_PTR(&pin_GPIO10) },
+
+    { MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_G11), MP_ROM_PTR(&pin_GPIO11) },
+
+    { MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_G13), MP_ROM_PTR(&pin_GPIO13) },
+
+    { MP_ROM_QSTR(MP_QSTR_CLK), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_G12), MP_ROM_PTR(&pin_GPIO12) },
+
+    { MP_ROM_QSTR(MP_QSTR_G14), MP_ROM_PTR(&pin_GPIO14) },
+
+    // Second PMOD connector
+    { MP_ROM_QSTR(MP_QSTR_G38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_G39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_G40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_G41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_G42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_G21), MP_ROM_PTR(&pin_GPIO21) },
+
+    // LCD & touchscreen
+    { MP_ROM_QSTR(MP_QSTR_LCD_DC), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_CS), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_MOSI), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_SCK), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_RST), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_LCD_CTRL), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_CTP_INT), MP_ROM_PTR(&pin_GPIO3) },
+
+    // Audio
+    { MP_ROM_QSTR(MP_QSTR_I2S_ADC_SDOUT), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_MCLK), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_SCLK), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_LRCK), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_I2S_CODEC_DSDIN), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_PA_CTRL), MP_ROM_PTR(&pin_GPIO46) },
+    { MP_ROM_QSTR(MP_QSTR_MUTE_STATUS), MP_ROM_PTR(&pin_GPIO1) },
+
+    // Internal I2C bus
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO18) },
+
+    // boot button, also usable as a software button
+    { MP_ROM_QSTR(MP_QSTR_BOOT), MP_ROM_PTR(&pin_GPIO0) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32s3_box/sdkconfig

@@ -0,0 +1,9 @@
+CONFIG_ESP32S3_SPIRAM_SUPPORT=y
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_MEMTEST=y
+CONFIG_SPIRAM_MODE_OCT=y
+CONFIG_SPIRAM_SPEED_80M=y
+CONFIG_SPIRAM_TYPE_AUTO=y
+CONFIG_SPIRAM_USE_MALLOC=n
+CONFIG_SPIRAM=y

ports/espressif/supervisor/port.c

@@ -77,6 +77,10 @@
 
 #include "esp_debug_helpers.h"
 
+#ifdef CONFIG_SPIRAM
+#include "esp32/spiram.h"
+#endif
+
 #define HEAP_SIZE (48 * 1024)
 
 uint32_t *heap;
@@ -158,8 +162,11 @@ safe_mode_t port_init(void) {
     #endif
 
     #ifdef CONFIG_SPIRAM
-    heap = (uint32_t *)(DRAM0_CACHE_ADDRESS_HIGH - CONFIG_SPIRAM_SIZE);
-    heap_size = CONFIG_SPIRAM_SIZE / sizeof(uint32_t);
+    if (esp_spiram_is_initialized()) {
+        size_t spiram_size = esp_spiram_get_size();
+        heap = (uint32_t *)(SOC_EXTRAM_DATA_HIGH - spiram_size);
+        heap_size = spiram_size / sizeof(uint32_t);
+    }
     #endif
 
     if (heap == NULL) {