Merge pull request #28 from jposada202020/improving_docs

improving_docs

README.rst

@@ -58,13 +58,12 @@ Usage Notes
 ===========
 
 Getting the temperature in Celsius is easy! First, import all of the pins from
-the board, busio for native I2C communication and the thermometer library
+the board, board.I2C() for native I2C communication and the thermometer library
 itself.
 
 .. code-block:: python
 
   from board import *
-  import busio
   import adafruit_mcp9808
 
 Next, initialize the I2C bus in a with statement so it always gets shut down ok.
@@ -73,7 +72,7 @@ Then, construct the thermometer class:
 .. code-block:: python
 
   # Do one reading
-  with busio.I2C(SCL, SDA) as i2c:
+  with i2c = board.I2C() as i2c:
       t = adafruit_mcp9808.MCP9808(i2c)
 
       # Finally, read the temperature property and print it out

adafruit_mcp9808.py

@@ -3,7 +3,7 @@
 # SPDX-License-Identifier: MIT
 
 """
-`adafruit_mcp9808` - MCP9808 I2C Temperature Sensor
+`adafruit_mcp9808`
 ====================================================
 
 CircuitPython library to support MCP9808 high accuracy temperature sensor.
@@ -20,7 +20,7 @@
 
 **Software and Dependencies:**
 
-* Adafruit CircuitPython firmware (0.8.0+) for the ESP8622 and M0-based boards:
+* Adafruit CircuitPython firmware for the supported boards:
   https://github.com/adafruit/circuitpython/releases
 * Adafruit's Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice
 
@@ -43,7 +43,36 @@
 
 
 class MCP9808:
-    """Interface to the MCP9808 temperature sensor."""
+    """Interface to the MCP9808 temperature sensor.
+
+    :param ~busio.I2C i2c_bus: The I2C bus the MCP9808 is connected to.
+    :param int address: The I2C address of the device. Defaults to :const:`0x18`
+
+    **Quickstart: Importing and using the MCP9808**
+
+        Here is an example of using the :class:`MCP9808` class.
+        First you will need to import the libraries to use the sensor
+
+        .. code-block:: python
+
+            import board
+            import adafruit_mcp9808
+
+        Once this is done you can define your `board.I2C` object and define your sensor object
+
+        .. code-block:: python
+
+            i2c = board.I2C()   # uses board.SCL and board.SDA
+            mcp = adafruit_mcp9808.MCP9808(i2c_bus)
+
+        Now you have access to the change in temperature using the
+        :attr:`temperature` attribute. This temperature is in Celsius.
+
+        .. code-block:: python
+
+            temperature = mcp.temperature
+
+    """
 
     # alert_lower_temperature_bound
     # alert_upper_temperature_bound
@@ -75,7 +104,7 @@ def __init__(self, i2c_bus, address=0x18):
 
     @property
     def temperature(self):
-        """Temperature in celsius. Read-only."""
+        """Temperature in Celsius. Read-only."""
         self.buf[0] = 0x05
         with self.i2c_device as i2c:
             i2c.write_then_readinto(self.buf, self.buf, out_end=1, in_start=1)

docs/index.rst

@@ -23,6 +23,8 @@ Table of Contents
 .. toctree::
     :caption: Tutorials
 
+    Adafruit MCP9808 High Accuracy I2C Temperature Sensor Learning Guide <https://learn.adafruit.com/adafruit-mcp9808-precision-i2c-temperature-sensor-guide>
+
 .. toctree::
     :caption: Related Products
 

examples/mcp9808_simpletest.py

@@ -3,13 +3,12 @@
 
 import time
 import board
-import busio
 import adafruit_mcp9808
 
-i2c_bus = busio.I2C(board.SCL, board.SDA)
+i2c = board.I2C()  # uses board.SCL and board.SDA
 
 # To initialise using the default address:
-mcp = adafruit_mcp9808.MCP9808(i2c_bus)
+mcp = adafruit_mcp9808.MCP9808(i2c)
 
 # To initialise using a specified address:
 # Necessary when, for example, connecting A0 to VDD to make address=0x19