diff --git a/.github/workflows/nightly.yml b/.github/workflows/nightly.yml index 500e82c7dbc..d77cac79902 100644 --- a/.github/workflows/nightly.yml +++ b/.github/workflows/nightly.yml @@ -61,7 +61,6 @@ jobs: f.write(release_notes.render( timestamp=str(datetime.datetime.now().strftime("%Y-%m-%d %H:%M:%S")), caller_workflow=caller_workflow, - branch="" if is_main else short_version, branch_specific="" if is_main else f"?branch={short_version}", )) diff --git a/.github/workflows/nightly_release_notes.md.jinja b/.github/workflows/nightly_release_notes.md.jinja index 62edf164084..a14c8d76a08 100644 --- a/.github/workflows/nightly_release_notes.md.jinja +++ b/.github/workflows/nightly_release_notes.md.jinja @@ -4,18 +4,17 @@ | | | |--------------:|--------------------------------------------------------------------------------------------| -| **Nightlies** | [![nightly {{ branch }}](https://github.com/Ultimaker/Cura/actions/workflows/{{ caller_workflow }}/badge.svg{{ branch_specific }} -?event=schedule)](https://github.com/Ultimaker/Cura/actions/workflows/installers.yml) | +| **Nightlies** | [![nightly](https://github.com/Ultimaker/Cura/actions/workflows/{{ caller_workflow }}/badge.svg{{ branch_specific }}?event=schedule)](https://github.com/Ultimaker/Cura/actions/workflows/installers.yml) | # Unit Test results | | | |-------------------------------:|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| -| **Cura {{ branch }}** | [![unit-test](https://github.com/Ultimaker/Cura/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Cura/actions/workflows/unit-test.yml) | -| **CuraEngine {{ branch }}** | [![unit-test](https://github.com/Ultimaker/CuraEngine/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/CuraEngine/actions/workflows/unit-test.yml) | -| **Uranium {{ branch }}** | [![unit-test](https://github.com/Ultimaker/Uranium/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Uranium/actions/workflows/unit-test.yml) | -| **CuraEngine GradualFlow 0.1** | [![unit-test](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/unit-test.yml/badge.svg?branch=0.1)](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/unit-test.yml) | -| **synsepalum-dulcificum 0.1** | [![unit-test](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/unit-test.yml/badge.svg?branch=0.1)](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/unit-test.yml) | +| **Cura** | [![unit-test](https://github.com/Ultimaker/Cura/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Cura/actions/workflows/unit-test.yml) | +| **CuraEngine** | [![unit-test](https://github.com/Ultimaker/CuraEngine/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/CuraEngine/actions/workflows/unit-test.yml) | +| **Uranium** | [![unit-test](https://github.com/Ultimaker/Uranium/actions/workflows/unit-test.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Uranium/actions/workflows/unit-test.yml) | +| **CuraEngine GradualFlow** | [![unit-test](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/unit-test.yml/badge.svg)](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/unit-test.yml) | +| **synsepalum-dulcificum** | [![unit-test](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/unit-test.yml/badge.svg)](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/unit-test.yml) | | **libSavitar** | [![unit-test](https://github.com/Ultimaker/libSavitar/actions/workflows/unit-test.yml/badge.svg)](https://github.com/Ultimaker/libSavitar/actions/workflows/unit-test.yml) | | **libnest2d** | [![unit-test](https://github.com/Ultimaker/libnest2d/actions/workflows/unit-test.yml/badge.svg)](https://github.com/Ultimaker/libnest2d/actions/workflows/unit-test.yml) | @@ -23,14 +22,14 @@ | | | |------------------------------------:|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| -| **Cura {{ branch }}** | [![conan-package](https://github.com/Ultimaker/Cura/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Cura/actions/workflows/conan-package.yml) | -| **CuraEngine {{ branch }}** | [![conan-package](https://github.com/Ultimaker/CuraEngine/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/CuraEngine/actions/workflows/conan-package.yml) | -| **Uranium {{ branch }}** | [![conan-package](https://github.com/Ultimaker/Uranium/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Uranium/actions/workflows/conan-package.yml) | -| **fdm_materials {{ branch }}** | [![conan-package](https://github.com/Ultimaker/fdm_materials/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/fdm_materials/actions/workflows/conan-package.yml) | -| **cura-binary-data {{ branch }}** | [![conan-package](https://github.com/Ultimaker/cura-binary-data/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/cura-binary-data/actions/workflows/conan-package.yml) | -| **CuraEngine GradualFlow 0.1** | [![conan-package](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/conan-package.yml/badge.svg?branch=0.1)](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/conan-package.yml) | -| **synsepalum-dulcificum 0.1** | [![conan-package](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/conan-package.yml/badge.svg?branch=0.1)](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/conan-package.yml) | -| **CuraEngine gRPC definitions 0.1** | [![conan-package](https://github.com/Ultimaker/CuraEngine_grpc_definitions/actions/workflows/conan-package.yml/badge.svg?branch=0.1)](https://github.com/Ultimaker/CuraEngine_grpc_definitions/actions/workflows/conan-package.yml) | +| **Cura** | [![conan-package](https://github.com/Ultimaker/Cura/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Cura/actions/workflows/conan-package.yml) | +| **CuraEngine** | [![conan-package](https://github.com/Ultimaker/CuraEngine/actions/workflows/package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/CuraEngine/actions/workflows/package.yml) | +| **Uranium** | [![conan-package](https://github.com/Ultimaker/Uranium/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/Uranium/actions/workflows/conan-package.yml) | +| **fdm_materials** | [![conan-package](https://github.com/Ultimaker/fdm_materials/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/fdm_materials/actions/workflows/conan-package.yml) | +| **cura-binary-data** | [![conan-package](https://github.com/Ultimaker/cura-binary-data/actions/workflows/conan-package.yml/badge.svg{{ branch_specific }})](https://github.com/Ultimaker/cura-binary-data/actions/workflows/conan-package.yml) | +| **CuraEngine GradualFlow** | [![conan-package](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/CuraEngine_plugin_gradual_flow/actions/workflows/conan-package.yml) | +| **synsepalum-dulcificum** | [![conan-package](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/synsepalum-dulcificum/actions/workflows/conan-package.yml) | +| **CuraEngine gRPC definitions** | [![conan-package](https://github.com/Ultimaker/CuraEngine_grpc_definitions/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/CuraEngine_grpc_definitions/actions/workflows/conan-package.yml) | | **libArcus** | [![conan-package](https://github.com/Ultimaker/libArcus/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/libArcus/actions/workflows/conan-package.yml) | | **pyArcus** | [![conan-package](https://github.com/Ultimaker/pyArcus/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/pyArcus/actions/workflows/conan-package.yml) | | **libSavitar** | [![conan-package](https://github.com/Ultimaker/libSavitar/actions/workflows/conan-package.yml/badge.svg)](https://github.com/Ultimaker/libSavitar/actions/workflows/conan-package.yml) | diff --git a/UltiMaker-Cura.spec.jinja b/UltiMaker-Cura.spec.jinja index d618ca3309c..6d06ab7ff96 100644 --- a/UltiMaker-Cura.spec.jinja +++ b/UltiMaker-Cura.spec.jinja @@ -75,7 +75,7 @@ app = BUNDLE( coll, name='{{ display_name }}.app', icon={{ icon }}, - bundle_identifier={{ osx_bundle_identifier }} + "_" + '{{ display_name }}'.replace(" ", "_") + "_" {{ short_version }}, + bundle_identifier={{ osx_bundle_identifier }} + "_" + '{{ display_name }}'.replace(" ", "_"), version={{ version }}, info_plist={ 'CFBundleDisplayName': '{{ display_name }}', diff --git a/conandata.yml b/conandata.yml index c1f79a86752..7dbdb67b803 100644 --- a/conandata.yml +++ b/conandata.yml @@ -5,9 +5,9 @@ requirements: - "curaengine/5.10.0-alpha.0@ultimaker/cura_12250" - "cura_binary_data/5.10.0-alpha.0@ultimaker/testing" - "fdm_materials/5.10.0-alpha.0@ultimaker/testing" - - "dulcificum/0.2.1@ultimaker/stable" - - "pysavitar/5.4.0-alpha.0@ultimaker/stable" - - "pynest2d/5.4.0-alpha.0@ultimaker/stable" + - "dulcificum/5.10.0@ultimaker/stable" + - "pysavitar/5.10.0@ultimaker/stable" + - "pynest2d/5.10.0@ultimaker/stable" requirements_internal: - "fdm_materials/5.10.0-alpha.0@internal/testing" - "cura_private_data/5.10.0-alpha.0@internal/testing" diff --git a/conanfile.py b/conanfile.py index 01e2ffb579c..3a71d8bca28 100644 --- a/conanfile.py +++ b/conanfile.py @@ -27,7 +27,6 @@ class CuraConan(ConanFile): generators = "VirtualPythonEnv" tool_requires = "gettext/0.22.5" - # FIXME: Remove specific branch once merged to main python_requires = "translationextractor/[>=2.2.0]@ultimaker/stable" options = { diff --git a/cura/PrinterOutput/FormatMaps.py b/cura/PrinterOutput/FormatMaps.py index 3a03da71fdf..1974f4c08c5 100644 --- a/cura/PrinterOutput/FormatMaps.py +++ b/cura/PrinterOutput/FormatMaps.py @@ -13,7 +13,9 @@ class FormatMaps: "fire_e": "ultimaker_method", "lava_f": "ultimaker_methodx", "magma_10": "ultimaker_methodxl", - "sketch": "ultimaker_sketch" + "sketch": "ultimaker_sketch", + "sketch_large": "ultimaker_sketch_large", + "sketch_sprint": "ultimaker_sketch_sprint" } # A map from the extruder-name in their native file-formats to the internal name we use. @@ -23,7 +25,10 @@ class FormatMaps: "mk14_c": "1C", "mk14": "1A", "mk14_s": "2A", - "mk14_e": "LABS" + "mk14_e": "LABS", + "sketch_extruder": "0.4mm", + "sketch_l_extruder": "0.4mm", + "sketch_sprint_extruder": "0.4mm", } # A map from the material-name in their native file-formats to some info, including the internal name we use. diff --git a/cura/PrinterOutput/Models/PrinterConfigurationModel.py b/cura/PrinterOutput/Models/PrinterConfigurationModel.py index 85c69abcd3d..d42be47b41d 100644 --- a/cura/PrinterOutput/Models/PrinterConfigurationModel.py +++ b/cura/PrinterOutput/Models/PrinterConfigurationModel.py @@ -1,9 +1,12 @@ -# Copyright (c) 2018 Ultimaker B.V. +# Copyright (c) 2025 UltiMaker # Cura is released under the terms of the LGPLv3 or higher. from PyQt6.QtCore import pyqtProperty, QObject, pyqtSignal from typing import List +from UM.Settings.ContainerRegistry import ContainerRegistry +from UM.Settings.DefinitionContainer import DefinitionContainer + MYPY = False if MYPY: from cura.PrinterOutput.Models.ExtruderConfigurationModel import ExtruderConfigurationModel @@ -68,6 +71,15 @@ def hasAnyMaterialLoaded(self) -> bool: return True return False + @pyqtProperty("QStringList", constant=True) + def validCoresForPrinterType(self) -> List[str]: + printers = ContainerRegistry.getInstance().findContainersMetadata( + ignore_case=True, type="machine", name=self._printer_type, container_type=DefinitionContainer) + id = printers[0]["id"] if len(printers) > 0 and "id" in printers[0] else "" + definitions = ContainerRegistry.getInstance().findContainersMetadata( + ignore_case=True, type="variant", definition=id+"*") + return [x["name"] for x in definitions] + def __str__(self): message_chunks = [] message_chunks.append("Printer type: " + self._printer_type) diff --git a/cura/Settings/MachineManager.py b/cura/Settings/MachineManager.py index 82b52d3dde5..4c16061074f 100755 --- a/cura/Settings/MachineManager.py +++ b/cura/Settings/MachineManager.py @@ -1678,7 +1678,7 @@ def activeQualityDisplayNameMap(self) -> ActiveQuality: intent_category = self.activeIntentCategory, intent_name = IntentCategoryModel.translation(self.activeIntentCategory, "name", self.activeIntentCategory.title()), custom_profile = self.activeQualityOrQualityChangesName if global_stack.qualityChanges is not empty_quality_changes_container else None, - layer_height = self.activeQualityLayerHeight if self.isActiveQualitySupported else None, + layer_height = float("{:.2f}".format(self.activeQualityLayerHeight)) if self.isActiveQualitySupported else None, is_experimental = self.isActiveQualityExperimental and self.isActiveQualitySupported ) diff --git a/packaging/AppImage/cura.desktop.jinja b/packaging/AppImage/cura.desktop.jinja index 1230d4ff5cc..dc6cddcc039 100644 --- a/packaging/AppImage/cura.desktop.jinja +++ b/packaging/AppImage/cura.desktop.jinja @@ -5,11 +5,11 @@ GenericName=3D Printing Software GenericName[de]=3D-Druck-Software GenericName[nl]=3D-Print Software Comment=Cura converts 3D models into paths for a 3D printer. It prepares your print for maximum accuracy, minimum printing time and good reliability with many extra features that make your print come out great. -Exec=UltiMaker-Cura %F +Exec=UltiMaker-Cura %U Icon=cura-icon Terminal=false Type=Application -MimeType=model/stl;application/vnd.ms-3mfdocument;application/prs.wavefront-obj;image/bmp;image/gif;image/jpeg;image/png;text/x-gcode;application/x-amf;application/x-ply;application/x-ctm;model/vnd.collada+xml;model/gltf-binary;model/gltf+json;model/vnd.collada+xml+zip; +MimeType=model/stl;application/vnd.ms-3mfdocument;model/3mf;application/prs.wavefront-obj;image/bmp;image/gif;image/jpeg;image/png;text/x-gcode;application/x-amf;application/x-ply;application/x-ctm;model/vnd.collada+xml;model/gltf-binary;model/gltf+json;model/vnd.collada+xml+zip;x-scheme-handler/cura; Categories=Graphics; Keywords=3D;Printing; X-AppImage-Version={{ cura_version }} diff --git a/packaging/MacOS/build_macos.py b/packaging/MacOS/build_macos.py index a495a027695..a7063f688d7 100644 --- a/packaging/MacOS/build_macos.py +++ b/packaging/MacOS/build_macos.py @@ -154,7 +154,7 @@ def create_dmg(filename: str, dist_path: str, source_path: str, app_name: str) - parser.add_argument("--app_name", required = True, type = str, help = "Filename of the .app that will be contained within the dmg/pkg") args = parser.parse_args() - cura_version = args.cura_conan_version.split("/")[-1] + cura_version = args.cura_conan_version.replace("+","-") # + is not allowed for bundle identifier app_name = f"{args.app_name}.app" diff --git a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml index c2238d2205c..d40efbee8a6 100644 --- a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml +++ b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml @@ -214,7 +214,7 @@ Item settingStoreIndex: propertyStoreIndex - labelText: catalog.i18nc("@label", "Y min") + labelText: catalog.i18nc("@label", "Y min ( '-' towards back)") labelFont: base.labelFont labelWidth: base.labelWidth controlWidth: base.controlWidth @@ -254,7 +254,7 @@ Item settingKey: "machine_head_with_fans_polygon" settingStoreIndex: propertyStoreIndex - labelText: catalog.i18nc("@label", "Y max") + labelText: catalog.i18nc("@label", "Y max ( '+' towards front)") labelFont: base.labelFont labelWidth: base.labelWidth controlWidth: base.controlWidth diff --git a/plugins/MakerbotWriter/MakerbotWriter.py b/plugins/MakerbotWriter/MakerbotWriter.py index 5c655dc8cc3..e4c2d2cbd13 100644 --- a/plugins/MakerbotWriter/MakerbotWriter.py +++ b/plugins/MakerbotWriter/MakerbotWriter.py @@ -46,6 +46,13 @@ def __init__(self) -> None: suffixes=["makerbot"] ) ) + MimeTypeDatabase.addMimeType( + MimeType( + name="application/x-makerbot-replicator_plus", + comment="Makerbot Toolpath Package", + suffixes=["makerbot"] + ) + ) _PNG_FORMAT = [ {"prefix": "isometric_thumbnail", "width": 120, "height": 120}, @@ -114,6 +121,8 @@ def write(self, stream: BufferedIOBase, nodes: List[SceneNode], mode=MeshWriter. filename, filedata = "print.gcode", gcode_text_io.getvalue() case "application/x-makerbot": filename, filedata = "print.jsontoolpath", du.gcode_2_miracle_jtp(gcode_text_io.getvalue()) + case "application/x-makerbot-replicator_plus": + filename, filedata = "print.jsontoolpath", du.gcode_2_miracle_jtp(gcode_text_io.getvalue(), nb_extruders=1) case _: raise Exception("Unsupported Mime type") @@ -249,11 +258,87 @@ def _getMeta(self, root_nodes: List[SceneNode]) -> Tuple[Dict[str, any], str]: meta["preferences"] = dict() bounds = application.getBuildVolume().getBoundingBox() + intent = CuraApplication.getInstance().getIntentManager().currentIntentCategory meta["preferences"]["instance0"] = { "machineBounds": [bounds.right, bounds.front, bounds.left, bounds.back] if bounds is not None else None, - "printMode": CuraApplication.getInstance().getIntentManager().currentIntentCategory, + "printMode": intent } + if file_format == "application/x-makerbot": + accel_overrides = meta["accel_overrides"] = {} + if intent in ['highspeed', 'highspeedsolid']: + accel_overrides['do_input_shaping'] = True + accel_overrides['do_corner_rounding'] = True + bead_mode_overrides = accel_overrides["bead_mode"] = {} + + accel_enabled = global_stack.getProperty('acceleration_enabled', 'value') + + if accel_enabled: + global_accel_setting = global_stack.getProperty('acceleration_print', 'value') + accel_overrides["rate_mm_per_s_sq"] = { + "x": global_accel_setting, + "y": global_accel_setting + } + + if global_stack.getProperty('acceleration_travel_enabled', 'value'): + travel_accel_setting = global_stack.getProperty('acceleration_travel', 'value') + bead_mode_overrides['Travel Move'] = { + "rate_mm_per_s_sq": { + "x": travel_accel_setting, + "y": travel_accel_setting + } + } + + jerk_enabled = global_stack.getProperty('jerk_enabled', 'value') + if jerk_enabled: + global_jerk_setting = global_stack.getProperty('jerk_print', 'value') + accel_overrides["max_speed_change_mm_per_s"] = { + "x": global_jerk_setting, + "y": global_jerk_setting + } + + if global_stack.getProperty('jerk_travel_enabled', 'value'): + travel_jerk_setting = global_stack.getProperty('jerk_travel', 'value') + if 'Travel Move' not in bead_mode_overrides: + bead_mode_overrides['Travel Move' ] = {} + bead_mode_overrides['Travel Move'].update({ + "max_speed_change_mm_per_s": { + "x": travel_jerk_setting, + "y": travel_jerk_setting + } + }) + + + # Get bead mode settings per extruder + available_bead_modes = { + "infill": "FILL", + "prime_tower": "PRIME_TOWER", + "roofing": "TOP_SURFACE", + "support_infill": "SUPPORT", + "support_interface": "SUPPORT_INTERFACE", + "wall_0": "WALL_OUTER", + "wall_x": "WALL_INNER", + "skirt_brim": "SKIRT" + } + for idx, extruder in enumerate(extruders): + for bead_mode_setting, bead_mode_tag in available_bead_modes.items(): + ext_specific_tag = "%s_%s" % (bead_mode_tag, idx) + if accel_enabled or jerk_enabled: + bead_mode_overrides[ext_specific_tag] = {} + + if accel_enabled: + accel_val = extruder.getProperty('acceleration_%s' % bead_mode_setting, 'value') + bead_mode_overrides[ext_specific_tag]["rate_mm_per_s_sq"] = { + "x": accel_val, + "y": accel_val + } + if jerk_enabled: + jerk_val = extruder.getProperty('jerk_%s' % bead_mode_setting, 'value') + bead_mode_overrides[ext_specific_tag][ "max_speed_change_mm_per_s"] = { + "x": jerk_val, + "y": jerk_val + } + meta["miracle_config"] = {"gaggles": {"instance0": {}}} version_info = dict() diff --git a/plugins/MakerbotWriter/__init__.py b/plugins/MakerbotWriter/__init__.py index 60f232fbc01..bd766add8e3 100644 --- a/plugins/MakerbotWriter/__init__.py +++ b/plugins/MakerbotWriter/__init__.py @@ -25,6 +25,12 @@ def getMetaData(): "description": catalog.i18nc("@item:inlistbox", "Makerbot Sketch Printfile"), "mime_type": "application/x-makerbot-sketch", "mode": MakerbotWriter.MakerbotWriter.OutputMode.BinaryMode, + }, + { + "extension": file_extension, + "description": catalog.i18nc("@item:inlistbox", "Makerbot Replicator+ Printfile"), + "mime_type": "application/x-makerbot-replicator_plus", + "mode": MakerbotWriter.MakerbotWriter.OutputMode.BinaryMode, } ] }, diff --git a/plugins/PostProcessingPlugin/Script.py b/plugins/PostProcessingPlugin/Script.py index be661e08894..bdd57a06e00 100644 --- a/plugins/PostProcessingPlugin/Script.py +++ b/plugins/PostProcessingPlugin/Script.py @@ -122,7 +122,7 @@ def getValue(self, line: str, key: str, default = None) -> Any: if not key in line or (';' in line and line.find(key) > line.find(';')): return default sub_part = line[line.find(key) + 1:] - m = re.search('^-?[0-9]+\.?[0-9]*', sub_part) + m = re.search(r'^-?[0-9]+\.?[0-9]*', sub_part) if m is None: return default try: diff --git a/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py b/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py index f502678317a..43df7669623 100644 --- a/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py +++ b/plugins/PostProcessingPlugin/scripts/PauseAtHeight.py @@ -338,7 +338,7 @@ def execute(self, data: List[str]) -> List[str]: nbr_negative_layers += 1 #Track the latest printing temperature in order to resume at the correct temperature. - if re.match("T(\d*)", line): + if re.match(r"T(\d*)", line): current_t = self.getValue(line, "T") m = self.getValue(line, "M") if m is not None and (m == 104 or m == 109) and self.getValue(line, "S") is not None: diff --git a/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py b/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py index 4ca83772f29..090355a3c05 100644 --- a/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py +++ b/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py @@ -331,7 +331,7 @@ def isMethod(self) -> bool: return False [printer, *_] = self._printers - return printer.type in ("MakerBot Method X", "MakerBot Method XL", "MakerBot Sketch") + return printer.type in ("MakerBot Method", "MakerBot Method X", "MakerBot Method XL", "MakerBot Sketch", "MakerBot Sketch Large", "MakerBot Sketch Sprint") @pyqtProperty(bool, notify=_cloudClusterPrintersChanged) def supportsPrintJobActions(self) -> bool: diff --git a/plugins/UM3NetworkPrinting/src/Cloud/machine_id_to_name.json b/plugins/UM3NetworkPrinting/src/Cloud/machine_id_to_name.json index 9d0db2a30d3..6b99f740620 100644 --- a/plugins/UM3NetworkPrinting/src/Cloud/machine_id_to_name.json +++ b/plugins/UM3NetworkPrinting/src/Cloud/machine_id_to_name.json @@ -3,5 +3,7 @@ "ultimaker_methodx": "MakerBot Method X", "ultimaker_methodxl": "MakerBot Method XL", "ultimaker_factor4": "Ultimaker Factor 4", - "ultimaker_sketch": "MakerBot Sketch" + "ultimaker_sketch": "MakerBot Sketch", + "ultimaker_sketch_large": "MakerBot Sketch Large", + "ultimaker_sketch_sprint": "MakerBot Sketch Sprint" } diff --git a/plugins/UM3NetworkPrinting/src/ExportFileJob.py b/plugins/UM3NetworkPrinting/src/ExportFileJob.py index ac3da657190..1ab493c7478 100644 --- a/plugins/UM3NetworkPrinting/src/ExportFileJob.py +++ b/plugins/UM3NetworkPrinting/src/ExportFileJob.py @@ -28,7 +28,7 @@ def __init__(self, file_handler: Optional[FileHandler], nodes: List[SceneNode], # Determine the filename. job_name = CuraApplication.getInstance().getPrintInformation().jobName - job_name = re.sub("[^\w\-. ()]", "-", job_name) + job_name = re.sub(r"[^\w\-. ()]", "-", job_name) extension = self._mesh_format_handler.preferred_format.get("extension", "") self.setFileName("{}.{}".format(job_name, extension)) diff --git a/plugins/USBPrinting/USBPrinterOutputDevice.py b/plugins/USBPrinting/USBPrinterOutputDevice.py index 85b98e532b6..18d9466eb5c 100644 --- a/plugins/USBPrinting/USBPrinterOutputDevice.py +++ b/plugins/USBPrinting/USBPrinterOutputDevice.py @@ -97,6 +97,8 @@ def __init__(self, serial_port: str, baud_rate: Optional[int] = None) -> None: CuraApplication.getInstance().getOnExitCallbackManager().addCallback(self._checkActivePrintingUponAppExit) + CuraApplication.getInstance().getPreferences().addPreference("usb_printing/enabled", False) + # This is a callback function that checks if there is any printing in progress via USB when the application tries # to exit. If so, it will show a confirmation before def _checkActivePrintingUponAppExit(self) -> None: @@ -144,6 +146,8 @@ def requestWrite(self, nodes: List["SceneNode"], file_name: Optional[str] = None CuraApplication.getInstance().getController().setActiveStage("MonitorStage") + CuraApplication.getInstance().getPreferences().setValue("usb_printing/enabled", True) + #Find the g-code to print. gcode_textio = StringIO() gcode_writer = cast(MeshWriter, PluginRegistry.getInstance().getPluginObject("GCodeWriter")) diff --git a/plugins/VersionUpgrade/VersionUpgrade59to510/VersionUpgrade59to510.py b/plugins/VersionUpgrade/VersionUpgrade59to510/VersionUpgrade59to510.py new file mode 100644 index 00000000000..70190b6e7ff --- /dev/null +++ b/plugins/VersionUpgrade/VersionUpgrade59to510/VersionUpgrade59to510.py @@ -0,0 +1,68 @@ +import configparser +import io +from typing import Dict, Tuple, List + +from UM.VersionUpgrade import VersionUpgrade + +_RENAMED_SETTINGS = { + "wall_overhang_speed_factor": "wall_overhang_speed_factors" +} # type: Dict[str, str] + +_NEW_SETTING_VERSION = "25" + + +class VersionUpgrade59to510(VersionUpgrade): + def upgradePreferences(self, serialized: str, filename: str): + parser = configparser.ConfigParser(interpolation = None) + parser.read_string(serialized) + + # Fix 'renamed'(ish) settings for visibility + if "visible_settings" in parser["general"]: + all_setting_keys = parser["general"]["visible_settings"].strip().split(";") + if all_setting_keys: + for idx, key in enumerate(all_setting_keys): + if key in _RENAMED_SETTINGS: + all_setting_keys[idx] = _RENAMED_SETTINGS[key] + parser["general"]["visible_settings"] = ";".join(all_setting_keys) + + # Update version number. + parser["metadata"]["setting_version"] = _NEW_SETTING_VERSION + + result = io.StringIO() + parser.write(result) + return [filename], [result.getvalue()] + + def upgradeInstanceContainer(self, serialized: str, filename: str) -> Tuple[List[str], List[str]]: + parser = configparser.ConfigParser(interpolation = None, comment_prefixes = ()) + parser.read_string(serialized) + + # Update version number. + parser["metadata"]["setting_version"] = _NEW_SETTING_VERSION + + if "values" in parser: + for old_name, new_name in _RENAMED_SETTINGS.items(): + if old_name in parser["values"]: + parser["values"][new_name] = parser["values"][old_name] + del parser["values"][old_name] + if "wall_overhang_speed_factors" in parser["values"]: + old_value = float(parser["values"]["wall_overhang_speed_factors"]) + new_value = [max(1, int(round(old_value)))] + parser["values"]["wall_overhang_speed_factor"] = str(new_value) + + result = io.StringIO() + parser.write(result) + return [filename], [result.getvalue()] + + def upgradeStack(self, serialized: str, filename: str) -> Tuple[List[str], List[str]]: + parser = configparser.ConfigParser(interpolation = None) + parser.read_string(serialized) + + # Update version number. + if "metadata" not in parser: + parser["metadata"] = {} + + parser["metadata"]["setting_version"] = _NEW_SETTING_VERSION + + result = io.StringIO() + parser.write(result) + return [filename], [result.getvalue()] diff --git a/plugins/VersionUpgrade/VersionUpgrade59to510/__init__.py b/plugins/VersionUpgrade/VersionUpgrade59to510/__init__.py new file mode 100644 index 00000000000..4c2b2622b1b --- /dev/null +++ b/plugins/VersionUpgrade/VersionUpgrade59to510/__init__.py @@ -0,0 +1,60 @@ +# Copyright (c) 2024 UltiMaker +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import Any, Dict, TYPE_CHECKING + +from . import VersionUpgrade59to510 + +if TYPE_CHECKING: + from UM.Application import Application + +upgrade = VersionUpgrade59to510.VersionUpgrade59to510() + +def getMetaData() -> Dict[str, Any]: + return { + "version_upgrade": { + # From To Upgrade function + ("preferences", 7000024): ("preferences", 7000025, upgrade.upgradePreferences), + ("machine_stack", 6000024): ("machine_stack", 6000025, upgrade.upgradeStack), + ("extruder_train", 6000024): ("extruder_train", 6000025, upgrade.upgradeStack), + ("definition_changes", 4000024): ("definition_changes", 4000025, upgrade.upgradeInstanceContainer), + ("quality_changes", 4000024): ("quality_changes", 4000025, upgrade.upgradeInstanceContainer), + ("quality", 4000024): ("quality", 4000025, upgrade.upgradeInstanceContainer), + ("user", 4000024): ("user", 4000025, upgrade.upgradeInstanceContainer), + ("intent", 4000024): ("intent", 4000025, upgrade.upgradeInstanceContainer), + }, + "sources": { + "preferences": { + "get_version": upgrade.getCfgVersion, + "location": {"."} + }, + "machine_stack": { + "get_version": upgrade.getCfgVersion, + "location": {"./machine_instances"} + }, + "extruder_train": { + "get_version": upgrade.getCfgVersion, + "location": {"./extruders"} + }, + "definition_changes": { + "get_version": upgrade.getCfgVersion, + "location": {"./definition_changes"} + }, + "quality_changes": { + "get_version": upgrade.getCfgVersion, + "location": {"./quality_changes"} + }, + "quality": { + "get_version": upgrade.getCfgVersion, + "location": {"./quality"} + }, + "user": { + "get_version": upgrade.getCfgVersion, + "location": {"./user"} + } + } + } + + +def register(app: "Application") -> Dict[str, Any]: + return {"version_upgrade": upgrade} diff --git a/plugins/VersionUpgrade/VersionUpgrade59to510/plugin.json b/plugins/VersionUpgrade/VersionUpgrade59to510/plugin.json new file mode 100644 index 00000000000..f06d6b31610 --- /dev/null +++ b/plugins/VersionUpgrade/VersionUpgrade59to510/plugin.json @@ -0,0 +1,8 @@ +{ + "name": "Version Upgrade 5.9 to 5.10", + "author": "Ultimaker B.V.", + "version": "1.0.0", + "description": "Upgrades configurations from Cura 5.9 to Cura 5.10", + "api": 8, + "i18n-catalog": "cura" +} diff --git a/resources/conanfile.py b/resources/conanfile.py index aea89f4569f..cebaea4345d 100644 --- a/resources/conanfile.py +++ b/resources/conanfile.py @@ -46,9 +46,9 @@ def package(self): def package_info(self): self.cpp_info.includedirs = [] - self.runenv_info.append_path("CURA_RESOURCES", os.path.join(self.package_folder, "res")) - self.runenv_info.append_path("CURA_ENGINE_SEARCH_PATH", os.path.join(self.package_folder, "res", "definitions")) - self.runenv_info.append_path("CURA_ENGINE_SEARCH_PATH", os.path.join(self.package_folder, "res", "extruders")) + self.runenv_info.define("CURA_RESOURCES", os.path.join(self.package_folder, "res")) + self.runenv_info.define("CURA_ENGINE_SEARCH_PATH", os.path.join(self.package_folder, "res", "definitions")) + self.runenv_info.define("CURA_ENGINE_SEARCH_PATH", os.path.join(self.package_folder, "res", "extruders")) def package_id(self): self.info.clear() diff --git a/resources/definitions/ankermake_m5.def.json b/resources/definitions/ankermake_m5.def.json index 4a70851e33a..a4bc967108c 100644 --- a/resources/definitions/ankermake_m5.def.json +++ b/resources/definitions/ankermake_m5.def.json @@ -120,7 +120,12 @@ "support_z_distance": { "value": "layer_height * 2" }, "top_bottom_thickness": { "value": "layer_height * 4" }, "wall_overhang_angle": { "value": 55 }, - "wall_overhang_speed_factor": { "value": 55 }, + "wall_overhang_speed_factors": + { + "value": [ + 55 + ] + }, "zig_zaggify_infill": { "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'" } } } \ No newline at end of file diff --git a/resources/definitions/ankermake_m5c.def.json b/resources/definitions/ankermake_m5c.def.json index 131bd6bd7a8..3e1d7db0a93 100644 --- a/resources/definitions/ankermake_m5c.def.json +++ b/resources/definitions/ankermake_m5c.def.json @@ -238,7 +238,12 @@ "wall_extruder_nr": { "value": -1 }, "wall_line_width_0": { "value": 0.44 }, "wall_overhang_angle": { "value": 45 }, - "wall_overhang_speed_factor": { "value": 40 }, + "wall_overhang_speed_factors": + { + "value": [ + 40 + ] + }, "wall_thickness": { "value": 0.84 }, "wall_x_extruder_nr": { "value": -1 }, "zig_zaggify_infill": { "value": true } diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json index cd59e1c1691..01ecc1bdfec 100644 --- a/resources/definitions/atmat_signal_pro_base.def.json +++ b/resources/definitions/atmat_signal_pro_base.def.json @@ -167,7 +167,12 @@ "travel_avoid_supports": { "value": "True" }, "wall_line_width": { "value": "machine_nozzle_size" }, "wall_overhang_angle": { "value": "75" }, - "wall_overhang_speed_factor": { "value": "50" }, + "wall_overhang_speed_factors": + { + "value": [ + 50 + ] + }, "zig_zaggify_infill": { "value": "True" } } } \ No newline at end of file diff --git a/resources/definitions/blocks_base.def.json b/resources/definitions/blocks_base.def.json index fde5f912da1..64e4213d5f0 100644 --- a/resources/definitions/blocks_base.def.json +++ b/resources/definitions/blocks_base.def.json @@ -107,7 +107,7 @@ "travel_retract_before_outer_wall": { "value": true }, "wall_0_wipe_dist": { "value": 0.0 }, "wall_overhang_angle": { "default_value": 75 }, - "wall_overhang_speed_factor": { "default_value": 50 }, + "wall_overhang_speed_factors": { "default_value": "[50]" }, "wall_thickness": { "value": "line_width * 2" }, "z_seam_corner": { "value": "'z_seam_corner_weighted'" }, "z_seam_type": { "value": "'back'" } diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index c930a624d0b..e8d8e94a185 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -384,6 +384,7 @@ "RepRap (RepRap)": "RepRap", "UltiGCode": "Ultimaker 2", "Griffin": "Griffin", + "Cheetah": "Griffin+Cheetah", "Makerbot": "Makerbot", "BFB": "Bits from Bytes", "MACH3": "Mach3", @@ -461,7 +462,7 @@ "machine_head_with_fans_polygon": { "label": "Machine Head & Fan Polygon", - "description": "The shape of the print head. These are coordinates relative to the position of the print head, which is usually the position of its first extruder. The dimensions left and in front of the print head must be negative coordinates.", + "description": "The dimensions of the print head used to determine 'Safe Model Distance' when printing 'One at a Time'. These numbers relate to the centerline of the first extruder nozzle. Left of the nozzle is 'X Min' and must be negative. Rear of the nozzle is 'Y Min' and must be negative. X Max (right) and Y Max (front) are positive numbers. Gantry height is the dimension from the build plate to the X gantry beam.", "type": "polygon", "default_value": [ [-20, 10], @@ -3231,6 +3232,19 @@ "minimum_value": 0.01, "settable_per_mesh": false, "settable_per_extruder": true + }, + "material_pressure_advance_factor": + { + "enabled": false, + "label": "Pressure advance factor", + "description": "Tuning factor for pressure advance, which is meant to synchronize extrusion with motion", + "default_value": 0.05, + "maximum_value_warning": 1.0, + "minimum_value": 0, + "type": "float", + "settable_per_mesh": false, + "settable_per_extruder": true, + "settable_per_meshgroup": false } } }, @@ -4412,6 +4426,21 @@ "settable_per_mesh": false, "settable_per_extruder": true }, + "retraction_combing_avoid_distance": + { + "label": "Inside Travel Avoid Distance", + "description": "The distance between the nozzle and already printed outer walls when travelling inside a model.", + "unit": "mm", + "type": "float", + "default_value": 0, + "value": "machine_nozzle_size * 1.5", + "minimum_value": "0", + "minimum_value_warning": "machine_nozzle_size * 0.5", + "maximum_value_warning": "machine_nozzle_size * 10", + "enabled": "resolveOrValue('retraction_combing') != 'off'", + "settable_per_mesh": false, + "settable_per_extruder": true + }, "travel_retract_before_outer_wall": { "label": "Retract Before Outer Wall", @@ -4699,6 +4728,31 @@ "settable_per_mesh": false, "settable_per_extruder": true }, + "cool_min_layer_time_overhang": + { + "label": "Minimum Layer Time with Overhang", + "description": "The minimum time spent in a layer that contains overhanging extrusions. This forces the printer to slow down, to at least spend the time set here in one layer. This allows the printed material to cool down properly before printing the next layer. Layers may still take shorter than the minimal layer time if Lift Head is disabled and if the Minimum Speed would otherwise be violated.", + "unit": "s", + "type": "float", + "default_value": 5, + "value": "cool_min_layer_time", + "minimum_value": "0", + "maximum_value_warning": "600", + "settable_per_mesh": false, + "settable_per_extruder": true + }, + "cool_min_layer_time_overhang_min_segment_length": + { + "label": "Minimum Overhang Segment Length", + "description": "When trying to apply the minimum layer time specific for overhanging layers, it will be applied only if at least one consecutive overhanging extrusion move is longer than this value.", + "unit": "mm", + "type": "float", + "default_value": 5, + "minimum_value": "0", + "maximum_value_warning": "500", + "settable_per_mesh": false, + "settable_per_extruder": true + }, "cool_min_speed": { "label": "Minimum Speed", @@ -7485,6 +7539,88 @@ "enabled": "retraction_enable and extruders_enabled_count > 1", "settable_per_mesh": false, "settable_per_extruder": true + }, + "interlocking_enable": + { + "label": "Generate Interlocking Structure", + "description": "At the locations where models touch, generate an interlocking beam structure. This improves the adhesion between models, especially models printed in different materials.", + "type": "bool", + "enabled": "extruders_enabled_count > 1", + "default_value": false, + "resolve": "(extruders_enabled_count > 1) and any(extruderValues('interlocking_enable'))", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "interlocking_beam_width": + { + "label": "Interlocking Beam Width", + "description": "The width of the interlocking structure beams.", + "type": "float", + "unit": "mm", + "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", + "default_value": 0.8, + "value": "2 * wall_line_width_0", + "minimum_value": "min_odd_wall_line_width", + "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", + "maximum_value_warning": "max(extruderValues('wall_line_width_0')) * 6", + "settable_per_mesh": true, + "settable_per_extruder": true + }, + "interlocking_orientation": + { + "label": "Interlocking Structure Orientation", + "description": "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects.", + "unit": "\u00b0", + "type": "float", + "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", + "default_value": 22.5, + "minimum_value": "0", + "maximum_value": "360", + "resolve": "min(extruderValues('interlocking_orientation'))", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "interlocking_beam_layer_count": + { + "label": "Interlocking Beam Layer Count", + "description": "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects.", + "type": "int", + "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", + "default_value": 2, + "minimum_value": "1", + "maximum_value_warning": "50", + "resolve": "max(extruderValues('interlocking_beam_layer_count'))", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "interlocking_depth": + { + "label": "Interlocking Depth", + "description": "The distance from the boundary between models to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion.", + "type": "int", + "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", + "default_value": 2, + "minimum_value": "1", + "maximum_value": "10", + "maximum_value_warning": "5", + "resolve": "max(extruderValues('interlocking_depth'))", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "interlocking_boundary_avoidance": + { + "label": "Interlocking Boundary Avoidance", + "description": "The distance from the outside of a model where interlocking structures will not be generated, measured in cells.", + "type": "int", + "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", + "default_value": 2, + "minimum_value": "0", + "minimum_value_warning": "resolveOrValue('interlocking_depth')", + "maximum_value": "10", + "maximum_value_warning": "5", + "resolve": "max(extruderValues('interlocking_boundary_avoidance'))", + "settable_per_mesh": false, + "settable_per_extruder": false } } }, @@ -7907,88 +8043,6 @@ "settable_per_mesh": true, "settable_per_extruder": false }, - "interlocking_enable": - { - "label": "Generate Interlocking Structure", - "description": "At the locations where models touch, generate an interlocking beam structure. This improves the adhesion between models, especially models printed in different materials.", - "type": "bool", - "enabled": "extruders_enabled_count > 1", - "default_value": false, - "resolve": "(extruders_enabled_count > 1) and any(extruderValues('interlocking_enable'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, - "interlocking_beam_width": - { - "label": "Interlocking Beam Width", - "description": "The width of the interlocking structure beams.", - "type": "float", - "unit": "mm", - "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", - "default_value": 0.8, - "value": "2 * wall_line_width_0", - "minimum_value": "min_odd_wall_line_width", - "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", - "maximum_value_warning": "max(extruderValues('wall_line_width_0')) * 6", - "settable_per_mesh": true, - "settable_per_extruder": true - }, - "interlocking_orientation": - { - "label": "Interlocking Structure Orientation", - "description": "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects.", - "unit": "\u00b0", - "type": "float", - "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", - "default_value": 22.5, - "minimum_value": "0", - "maximum_value": "360", - "resolve": "min(extruderValues('interlocking_orientation'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, - "interlocking_beam_layer_count": - { - "label": "Interlocking Beam Layer Count", - "description": "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects.", - "type": "int", - "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", - "default_value": 2, - "minimum_value": "1", - "maximum_value_warning": "50", - "resolve": "max(extruderValues('interlocking_beam_layer_count'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, - "interlocking_depth": - { - "label": "Interlocking Depth", - "description": "The distance from the boundary between models to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion.", - "type": "int", - "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", - "default_value": 2, - "minimum_value": "1", - "maximum_value": "10", - "maximum_value_warning": "5", - "resolve": "max(extruderValues('interlocking_depth'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, - "interlocking_boundary_avoidance": - { - "label": "Interlocking Boundary Avoidance", - "description": "The distance from the outside of a model where interlocking structures will not be generated, measured in cells.", - "type": "int", - "enabled": "extruders_enabled_count > 1 and resolveOrValue('interlocking_enable')", - "default_value": 2, - "minimum_value": "0", - "minimum_value_warning": "resolveOrValue('interlocking_depth')", - "maximum_value": "10", - "maximum_value_warning": "5", - "resolve": "max(extruderValues('interlocking_boundary_avoidance'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, "support_skip_some_zags": { "label": "Break Up Support In Chunks", @@ -8401,15 +8455,13 @@ "value": "support_angle", "settable_per_mesh": true }, - "wall_overhang_speed_factor": + "wall_overhang_speed_factors": { - "label": "Overhanging Wall Speed", - "description": "Overhanging walls will be printed at this percentage of their normal print speed.", + "label": "Overhanging Wall Speeds", + "description": "Overhanging walls will be printed at a percentage of their normal print speed. You can specify multiple values, so that even more overhanging walls will be printed even slower, e.g. by setting [75, 50, 25]", "unit": "%", - "type": "float", - "default_value": 100, - "minimum_value": "0.001", - "minimum_value_warning": "25", + "type": "[int]", + "default_value": "[100]", "settable_per_mesh": true }, "bridge_settings_enabled": diff --git a/resources/definitions/gutenberg_base.def.json b/resources/definitions/gutenberg_base.def.json index f0329bef6de..335718c21af 100644 --- a/resources/definitions/gutenberg_base.def.json +++ b/resources/definitions/gutenberg_base.def.json @@ -109,7 +109,12 @@ "travel_avoid_other_parts": { "default_value": false }, "wall_line_width": { "value": "machine_nozzle_size" }, "wall_overhang_angle": { "default_value": 75 }, - "wall_overhang_speed_factor": { "default_value": 50 }, + "wall_overhang_speed_factors": + { + "default_value": [ + 50 + ] + }, "zig_zaggify_infill": { "value": true } } } \ No newline at end of file diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index f4ce358be1e..f283e564423 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -61,7 +61,12 @@ "support_pattern": { "default_value": "lines" }, "switch_extruder_retraction_amount": { "value": 100 }, "switch_extruder_retraction_speeds": { "value": 60 }, - "wall_overhang_speed_factor": { "value": 50 }, + "wall_overhang_speed_factors": + { + "value": [ + 50 + ] + }, "z_seam_corner": { "default_value": "z_seam_corner_any" }, "z_seam_relative": { "value": true }, "z_seam_type": { "default_value": "sharpest_corner" }, diff --git a/resources/definitions/snakeoil_standard_base.def.json b/resources/definitions/snakeoil_standard_base.def.json index 700edf3d352..16bec696367 100644 --- a/resources/definitions/snakeoil_standard_base.def.json +++ b/resources/definitions/snakeoil_standard_base.def.json @@ -109,7 +109,12 @@ "travel_avoid_other_parts": { "default_value": false }, "wall_line_width": { "value": "machine_nozzle_size" }, "wall_overhang_angle": { "default_value": 75 }, - "wall_overhang_speed_factor": { "default_value": 50 }, + "wall_overhang_speed_factors": + { + "default_value": [ + 50 + ] + }, "zig_zaggify_infill": { "value": true } } } \ No newline at end of file diff --git a/resources/definitions/sovol_base_bowden.def.json b/resources/definitions/sovol_base_bowden.def.json index 670b24fffc2..0f389a25f83 100644 --- a/resources/definitions/sovol_base_bowden.def.json +++ b/resources/definitions/sovol_base_bowden.def.json @@ -10,6 +10,6 @@ "overrides": { "retraction_amount": { "default_value": 5 }, - "retraction_speed": { "value": "machine_max_feedrate_e" } + "retraction_speed": { "value": "resolveOrValue('machine_max_feedrate_e')" } } } \ No newline at end of file diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 1e5eb952ed0..c7dfac8aefa 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -33,12 +33,14 @@ { "acceleration_enabled": { - "enabled": false, + "enabled": true, "value": true }, "acceleration_infill": { - "enabled": false, + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": "acceleration_print" }, "acceleration_layer_0": @@ -48,12 +50,18 @@ }, "acceleration_prime_tower": { - "enabled": false, + "enabled": "acceleration_enabled and prime_tower_enable and extruders_enabled_count > 1", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": "acceleration_print" }, "acceleration_print": { - "enabled": false, + "enabled": "acceleration_enabled", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": 800 }, "acceleration_print_layer_0": @@ -63,33 +71,49 @@ }, "acceleration_roofing": { - "enabled": false, + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": "acceleration_print" }, + "acceleration_skirt_brim": + { + "enabled": "acceleration_enabled and (adhesion_type == 'skirt' or adhesion_type == 'brim')", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, + "value": 800 + }, "acceleration_support": { - "enabled": false, + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": "acceleration_print" }, "acceleration_support_bottom": { "enabled": false, - "value": "acceleration_print" + "value": "acceleration_support_interface" }, "acceleration_support_infill": { - "enabled": false, - "value": "acceleration_print" + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, + "value": "acceleration_support" }, "acceleration_support_interface": { - "enabled": false, - "value": "acceleration_print" + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, + "value": "acceleration_support" }, "acceleration_support_roof": { "enabled": false, - "value": "acceleration_print" + "value": "acceleration_support_interface" }, "acceleration_topbottom": { @@ -98,7 +122,10 @@ }, "acceleration_travel": { - "enabled": false, + "enabled": "acceleration_enabled", + "maximum_value": 5000, + "minimum_value": 200, + "minimum_value_warning": 750, "value": 5000 }, "acceleration_travel_enabled": @@ -113,28 +140,37 @@ }, "acceleration_wall": { - "enabled": false, + "enabled": "acceleration_enabled", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, "value": "acceleration_print" }, "acceleration_wall_0": { - "enabled": false, - "value": "acceleration_print" + "enabled": "acceleration_enabled", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, + "value": "acceleration_wall" }, "acceleration_wall_0_roofing": { "enabled": false, - "value": "acceleration_print" + "value": "acceleration_wall" }, "acceleration_wall_x": { - "enabled": false, - "value": "acceleration_print" + "enabled": "acceleration_enabled", + "maximum_value": 3500, + "minimum_value": 200, + "minimum_value_warning": 750, + "value": "acceleration_wall" }, "acceleration_wall_x_roofing": { "enabled": false, - "value": "acceleration_print" + "value": "acceleration_wall" }, "adhesion_extruder_nr": { @@ -203,12 +239,15 @@ "inset_direction": { "value": "'inside_out'" }, "jerk_enabled": { - "enabled": false, + "enabled": true, "value": true }, "jerk_infill": { - "enabled": false, + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_layer_0": @@ -218,13 +257,19 @@ }, "jerk_prime_tower": { - "enabled": false, + "enabled": "jerk_enabled and prime_tower_enable and extruders_enabled_count > 1", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_print": { - "enabled": false, - "value": 6.25 + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, + "value": 12.5 }, "jerk_print_layer_0": { @@ -233,33 +278,50 @@ }, "jerk_roofing": { - "enabled": false, + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, + "jerk_skirt_brim": + { + "enabled": "jerk_enabled and (adhesion_type == 'brim' or adhesion_type == 'skirt')", + "value": 12.5 + }, "jerk_support": { - "enabled": false, + "enabled": "jerk_enabled and support_enable", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_support_bottom": { "enabled": false, - "value": "jerk_print" + "value": "jerk_support_interface" }, "jerk_support_infill": { - "enabled": false, - "value": "jerk_print" + "enabled": "jerk_enabled and support_enable", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, + "value": "jerk_support" }, "jerk_support_interface": { - "enabled": false, - "value": "jerk_print" + "enabled": "jerk_enabled and support_enable", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, + "value": "jerk_support" }, "jerk_support_roof": { "enabled": false, - "value": "jerk_print" + "value": "jerk_support_interface" }, "jerk_topbottom": { @@ -268,8 +330,11 @@ }, "jerk_travel": { - "enabled": false, - "value": "jerk_print" + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, + "value": 12.5 }, "jerk_travel_enabled": { @@ -283,12 +348,18 @@ }, "jerk_wall": { - "enabled": false, + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_wall_0": { - "enabled": false, + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_wall_0_roofing": @@ -298,7 +369,10 @@ }, "jerk_wall_x": { - "enabled": false, + "enabled": "jerk_enabled", + "maximum_value": 35, + "minimum_value": 5, + "minimum_value_warning": 12, "value": "jerk_print" }, "jerk_wall_x_roofing": @@ -517,16 +591,86 @@ "skirt_height": { "value": 3 }, "small_skin_width": { "value": 4 }, "speed_equalize_flow_width_factor": { "value": 0 }, - "speed_prime_tower": { "value": "speed_topbottom" }, - "speed_print": { "value": 50 }, - "speed_roofing": { "value": "speed_wall_0" }, - "speed_support": { "value": "speed_wall" }, - "speed_support_interface": { "value": "speed_topbottom" }, - "speed_topbottom": { "value": "speed_wall" }, + "speed_infill": + { + "maximum_value": 350, + "maximum_value_warning": 325 + }, + "speed_prime_tower": + { + "maximum_value": 250, + "maximum_value_warning": 200, + "value": "speed_topbottom" + }, + "speed_print": + { + "maximum_value": 350, + "maximum_value_warning": 325, + "value": 50 + }, + "speed_roofing": + { + "maximum_value": 300, + "maximum_value_warning": 275, + "value": "speed_wall_0" + }, + "speed_support": + { + "maximum_value": 350, + "maximum_value_warning": 325, + "value": "speed_wall" + }, + "speed_support_infill": + { + "maximum_value": 350, + "maximum_value_warning": 325 + }, + "speed_support_interface": + { + "maximum_value": 260, + "maximum_value_warning": 255, + "value": "speed_topbottom" + }, + "speed_support_roof": + { + "maximum_value": 260, + "maximum_value_warning": 255 + }, + "speed_topbottom": + { + "maximum_value": 260, + "maximum_value_warning": 255, + "value": "speed_wall" + }, "speed_travel": { "value": 250 }, - "speed_wall": { "value": "speed_print * 40/50" }, - "speed_wall_0": { "value": "speed_wall * 30/40" }, - "speed_wall_x": { "value": "speed_wall" }, + "speed_wall": + { + "maximum_value": 260, + "maximum_value_warning": 255, + "value": "speed_print * 40/50" + }, + "speed_wall_0": + { + "maximum_value": 260, + "maximum_value_warning": 255, + "value": "speed_wall * 30/40" + }, + "speed_wall_0_roofing": + { + "maximum_value": 260, + "maximum_value_warning": 255 + }, + "speed_wall_x": + { + "maximum_value": 260, + "maximum_value_warning": 255, + "value": "speed_wall" + }, + "speed_wall_x_roofing": + { + "maximum_value": 260, + "maximum_value_warning": 255 + }, "support_angle": { "value": 40 }, "support_bottom_height": { "value": "2*support_infill_sparse_thickness" }, "support_bottom_line_width": diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json new file mode 100644 index 00000000000..c1b7bac66cc --- /dev/null +++ b/resources/definitions/ultimaker_s8.def.json @@ -0,0 +1,406 @@ +{ + "version": 2, + "name": "Ultimaker S8", + "inherits": "ultimaker_s7", + "metadata": + { + "visible": true, + "author": "Ultimaker", + "manufacturer": "Ultimaker B.V.", + "file_formats": "application/x-ufp;text/x-gcode", + "platform": "ultimaker_s7_platform.obj", + "bom_numbers": [ + 10600 + ], + "firmware_update_info": + { + "check_urls": [ "https://software.ultimaker.com/releases/firmware/10600/stable/um-update.swu.version" ], + "id": 10600, + "update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update" + }, + "first_start_actions": [ "DiscoverUM3Action" ], + "has_machine_quality": true, + "has_materials": true, + "has_variants": true, + "machine_extruder_trains": + { + "0": "ultimaker_s8_extruder_left", + "1": "ultimaker_s8_extruder_right" + }, + "nozzle_offsetting_for_disallowed_areas": false, + "platform_offset": [ + 0, + 0, + 0 + ], + "platform_texture": "UltimakerS8backplate.png", + "preferred_material": "ultimaker_pla_blue", + "preferred_quality_type": "draft", + "preferred_variant_name": "AA+ 0.4", + "quality_definition": "ultimaker_s8", + "supported_actions": [ "DiscoverUM3Action" ], + "supports_material_export": true, + "supports_network_connection": true, + "supports_usb_connection": false, + "variants_name": "Print Core", + "variants_name_has_translation": true, + "weight": -2 + }, + "overrides": + { + "acceleration_infill": { "value": "acceleration_print" }, + "acceleration_layer_0": { "value": 2000 }, + "acceleration_prime_tower": { "value": "acceleration_print" }, + "acceleration_print": { "value": 20000 }, + "acceleration_print_layer_0": { "value": "acceleration_layer_0" }, + "acceleration_roofing": { "value": "acceleration_wall_0" }, + "acceleration_skirt_brim": { "value": "acceleration_layer_0" }, + "acceleration_support": { "value": "acceleration_print" }, + "acceleration_support_bottom": { "value": "acceleration_support_interface" }, + "acceleration_support_infill": { "value": "acceleration_support" }, + "acceleration_support_interface": { "value": "acceleration_support" }, + "acceleration_support_roof": { "value": "acceleration_support_interface" }, + "acceleration_topbottom": { "value": "acceleration_print" }, + "acceleration_travel": { "value": 10000 }, + "acceleration_travel_enabled": { "value": true }, + "acceleration_travel_layer_0": { "value": "acceleration_layer_0" }, + "acceleration_wall": { "value": "acceleration_print/8" }, + "acceleration_wall_0": { "value": "acceleration_wall" }, + "acceleration_wall_0_roofing": { "value": "acceleration_wall_0" }, + "acceleration_wall_x": { "value": "acceleration_print" }, + "acceleration_wall_x_roofing": { "value": "acceleration_wall" }, + "adhesion_type": { "value": "'skirt'" }, + "bottom_thickness": { "value": "3*layer_height if top_layers==4 else top_bottom_thickness" }, + "bridge_skin_material_flow": { "value": 200 }, + "bridge_skin_speed": + { + "unit": "mm/s", + "value": "bridge_wall_speed" + }, + "bridge_sparse_infill_max_density": { "value": 50 }, + "bridge_wall_material_flow": { "value": "bridge_skin_material_flow" }, + "bridge_wall_min_length": { "value": 10 }, + "bridge_wall_speed": + { + "unit": "mm/s", + "value": 50 + }, + "cool_min_layer_time": { "value": 5 }, + "cool_min_layer_time_overhang": { "value": 9 }, + "cool_min_layer_time_overhang_min_segment_length": { "value": 2 }, + "cool_min_speed": { "value": 6 }, + "cool_min_temperature": { "value": "material_print_temperature-15" }, + "default_material_print_temperature": { "maximum_value_warning": 320 }, + "extra_infill_lines_to_support_skins": { "value": "'walls_and_lines'" }, + "gradual_flow_enabled": { "value": false }, + "hole_xy_offset": { "value": 0.075 }, + "infill_overlap": { "value": 10 }, + "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'grid'" }, + "infill_sparse_density": { "value": 15 }, + "infill_wall_line_count": { "value": "1 if infill_sparse_density > 80 else 0" }, + "initial_bottom_layers": { "value": 2 }, + "jerk_infill": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print" + }, + "jerk_layer_0": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print/2" + }, + "jerk_prime_tower": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print" + }, + "jerk_print": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "10000" + }, + "jerk_print_layer_0": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_layer_0" + }, + "jerk_roofing": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_wall_0" + }, + "jerk_skirt_brim": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_layer_0" + }, + "jerk_support": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print" + }, + "jerk_support_bottom": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_support_interface" + }, + "jerk_support_infill": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_support" + }, + "jerk_support_interface": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_support" + }, + "jerk_support_roof": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_support_interface" + }, + "jerk_topbottom": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print" + }, + "jerk_travel": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": 10000 + }, + "jerk_travel_enabled": { "value": true }, + "jerk_travel_layer_0": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_travel" + }, + "jerk_wall": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print/5" + }, + "jerk_wall_0": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_wall" + }, + "jerk_wall_0_roofing": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_wall_0" + }, + "jerk_wall_x": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_print" + }, + "jerk_wall_x_roofing": + { + "maximum_value_warning": "machine_max_jerk_xy / 2", + "unit": "m/s\u00b3", + "value": "jerk_wall_0" + }, + "machine_gcode_flavor": { "default_value": "Cheetah" }, + "machine_max_feedrate_x": { "default_value": 500 }, + "machine_max_feedrate_y": { "default_value": 500 }, + "machine_max_jerk_e": + { + "default_value": 20000, + "unit": "m/s\u00b3", + "value": "20000 if machine_gcode_flavor == 'Cheetah' else 100" + }, + "machine_max_jerk_xy": + { + "default_value": 1000000, + "unit": "m/s\u00b3", + "value": "1000000 if machine_gcode_flavor == 'Cheetah' else 500" + }, + "machine_max_jerk_z": + { + "default_value": 20000, + "unit": "m/s\u00b3", + "value": "20000 if machine_gcode_flavor == 'Cheetah' else 100" + }, + "machine_name": { "default_value": "Ultimaker S8" }, + "machine_nozzle_cool_down_speed": { "default_value": 1.3 }, + "machine_nozzle_heat_up_speed": { "default_value": 0.6 }, + "machine_start_gcode": { "default_value": "M213 U0.1 ;undercut 0.1mm" }, + "material_extrusion_cool_down_speed": { "value": 0 }, + "material_final_print_temperature": { "value": "material_print_temperature - 5" }, + "material_initial_print_temperature": { "value": "material_print_temperature - 5" }, + "material_pressure_advance_factor": + { + "enabled": true, + "value": 0.5 + }, + "material_print_temperature_layer_0": { "maximum_value_warning": 320 }, + "max_flow_acceleration": { "value": 8.0 }, + "max_skin_angle_for_expansion": { "value": 45 }, + "meshfix_maximum_resolution": { "value": 0.4 }, + "min_infill_area": { "default_value": 10 }, + "optimize_wall_printing_order": { "value": false }, + "prime_tower_brim_enable": { "value": true }, + "prime_tower_min_volume": { "value": 10 }, + "retraction_amount": { "value": 6.5 }, + "retraction_combing_avoid_distance": { "value": 1.2 }, + "retraction_combing_max_distance": { "value": 100 }, + "retraction_hop": { "value": 0.2 }, + "retraction_hop_after_extruder_switch_height": { "value": 2 }, + "retraction_hop_enabled": { "value": true }, + "retraction_min_travel": { "value": "5 if support_enable and support_structure=='tree' else line_width * 2" }, + "retraction_prime_speed": { "value": 15 }, + "skin_edge_support_thickness": { "value": 0 }, + "skin_material_flow": { "value": 95 }, + "skin_overlap": { "value": 0 }, + "skin_preshrink": { "value": 0 }, + "skirt_line_count": { "value": 5 }, + "small_skin_on_surface": { "value": false }, + "small_skin_width": { "value": 4 }, + "speed_infill": + { + "maximum_value_warning": 300, + "value": "speed_print" + }, + "speed_ironing": + { + "maximum_value_warning": 300, + "value": 20 + }, + "speed_layer_0": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "speed_prime_tower": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "speed_print": + { + "maximum_value_warning": 300, + "value": 150 + }, + "speed_print_layer_0": + { + "maximum_value_warning": 300, + "value": "speed_layer_0" + }, + "speed_roofing": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "speed_skirt_brim": + { + "maximum_value_warning": 300, + "value": "speed_layer_0" + }, + "speed_support": + { + "maximum_value_warning": 300, + "value": "speed_wall_0" + }, + "speed_support_bottom": + { + "maximum_value_warning": 300, + "value": "speed_support_interface" + }, + "speed_support_infill": + { + "maximum_value_warning": 300, + "value": "speed_support" + }, + "speed_support_interface": + { + "maximum_value_warning": 300, + "value": 50 + }, + "speed_support_roof": + { + "maximum_value_warning": 300, + "value": "speed_support_interface" + }, + "speed_topbottom": + { + "maximum_value_warning": 300, + "value": "speed_print" + }, + "speed_travel": + { + "maximum_value": 500, + "value": 500 + }, + "speed_travel_layer_0": + { + "maximum_value": 500, + "value": 150 + }, + "speed_wall": + { + "maximum_value_warning": 300, + "value": "speed_print*2/3" + }, + "speed_wall_0": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "speed_wall_0_roofing": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "speed_wall_x": + { + "maximum_value_warning": 300, + "value": "speed_print" + }, + "speed_wall_x_roofing": + { + "maximum_value_warning": 300, + "value": "speed_wall" + }, + "support_brim_line_count": { "value": 5 }, + "support_density": { "value": "15 if support_structure == 'tree' else 20" }, + "support_infill_rate": { "value": "80 if gradual_support_infill_steps != 0 else 15" }, + "support_interface_enable": { "value": true }, + "support_pattern": { "value": "'gyroid' if support_structure == 'tree' else 'lines'" }, + "support_structure": { "value": "'normal'" }, + "support_z_distance": { "value": "0.4*material_shrinkage_percentage_z/100.0" }, + "top_bottom_thickness": { "value": "round(4*layer_height, 2)" }, + "travel_avoid_other_parts": { "value": false }, + "wall_0_acceleration": { "value": 1000 }, + "wall_0_deceleration": { "value": 1000 }, + "wall_0_end_speed_ratio": { "value": 100 }, + "wall_0_speed_split_distance": { "value": 0.2 }, + "wall_0_start_speed_ratio": { "value": 100 }, + "wall_0_wipe_dist": { "value": 0 }, + "wall_material_flow": { "value": 95 }, + "wall_overhang_angle": { "value": 45 }, + "wall_x_material_flow": { "value": 100 }, + "z_seam_corner": { "value": "'z_seam_corner_weighted'" }, + "z_seam_position": { "value": "'backright'" }, + "z_seam_type": { "value": "'sharpest_corner'" } + } +} \ No newline at end of file diff --git a/resources/definitions/ultimaker_sketch.def.json b/resources/definitions/ultimaker_sketch.def.json index 2f96b52397f..f746417e708 100644 --- a/resources/definitions/ultimaker_sketch.def.json +++ b/resources/definitions/ultimaker_sketch.def.json @@ -52,15 +52,13 @@ "ultimaker_rapidrinse", "ultimaker_sr30", "ultimaker_petg", - "ultimaker_metallic_pla", "basf_", "jabil_", "polymaker_", "ultimaker_rapidrinse", "ultimaker_sr30", "ultimaker_petg", - "ultimaker_pva", - "ultimaker_metallic_pla" + "ultimaker_pva" ], "has_machine_quality": true, "has_materials": true, diff --git a/resources/definitions/ultimaker_sketch_sprint.def.json b/resources/definitions/ultimaker_sketch_sprint.def.json index cde655e70f6..885db850576 100644 --- a/resources/definitions/ultimaker_sketch_sprint.def.json +++ b/resources/definitions/ultimaker_sketch_sprint.def.json @@ -53,8 +53,7 @@ "ultimaker_pva", "ultimaker_rapidrinse", "ultimaker_sr30", - "ultimaker_petg", - "ultimaker_metallic_pla" + "ultimaker_petg" ], "has_machine_quality": true, "has_materials": true, @@ -130,7 +129,7 @@ ] }, "infill_before_walls": { "value": false }, - "infill_line_width": { "value": 0.45 }, + "infill_line_width": { "value": "0.45 if layer_height == 0.2 else 0.4" }, "infill_overlap": { "value": 10 }, "infill_pattern": { "value": "'lines'" }, "infill_sparse_density": { "value": 15 }, @@ -380,10 +379,12 @@ "wall_0_wipe_dist": { "value": 0.2 }, "wall_line_width_x": { "value": 0.58 }, "wall_overhang_angle": { "value": 35 }, - "wall_overhang_speed_factor": + "wall_overhang_speed_factors": { "minimum_value_warning": 15, - "value": 17.5 + "value": [ + 18 + ] }, "wall_thickness": { "value": 1 }, "wall_x_material_flow_layer_0": { "value": "material_flow" }, diff --git a/resources/definitions/voron2_base.def.json b/resources/definitions/voron2_base.def.json index dc6cd255bb1..d08166d60d2 100644 --- a/resources/definitions/voron2_base.def.json +++ b/resources/definitions/voron2_base.def.json @@ -119,7 +119,12 @@ "travel_avoid_other_parts": { "default_value": false }, "wall_line_width": { "value": "machine_nozzle_size" }, "wall_overhang_angle": { "default_value": 75 }, - "wall_overhang_speed_factor": { "default_value": 50 }, + "wall_overhang_speed_factors": + { + "default_value": [ + 50 + ] + }, "zig_zaggify_infill": { "value": true } } } \ No newline at end of file diff --git a/resources/definitions/vzbot_base.def.json b/resources/definitions/vzbot_base.def.json index 4efdbc2f66b..a447f1acdbb 100644 --- a/resources/definitions/vzbot_base.def.json +++ b/resources/definitions/vzbot_base.def.json @@ -195,7 +195,12 @@ "travel_avoid_other_parts": { "default_value": false }, "wall_line_width": { "value": "machine_nozzle_size" }, "wall_overhang_angle": { "default_value": 75 }, - "wall_overhang_speed_factor": { "default_value": 50 }, + "wall_overhang_speed_factors": + { + "default_value": [ + 50 + ] + }, "xy_offset_layer_0": { "value": -0.3 }, "z_seam_type": { "value": "'back'" }, "zig_zaggify_infill": { "value": true } diff --git a/resources/extruders/ultimaker_s8_extruder_left.def.json b/resources/extruders/ultimaker_s8_extruder_left.def.json new file mode 100644 index 00000000000..cd2c34d16f8 --- /dev/null +++ b/resources/extruders/ultimaker_s8_extruder_left.def.json @@ -0,0 +1,31 @@ +{ + "version": 2, + "name": "Extruder 1", + "inherits": "fdmextruder", + "metadata": + { + "machine": "ultimaker_s8", + "position": "0" + }, + "overrides": + { + "extruder_nr": + { + "default_value": 0, + "maximum_value": "1" + }, + "extruder_prime_pos_x": { "default_value": -3 }, + "extruder_prime_pos_y": { "default_value": 6 }, + "extruder_prime_pos_z": { "default_value": 2 }, + "machine_extruder_end_pos_abs": { "default_value": true }, + "machine_extruder_end_pos_x": { "default_value": 330 }, + "machine_extruder_end_pos_y": { "default_value": 237 }, + "machine_extruder_start_code": { "value": "\"M214 K{material_pressure_advance_factor} R0.04\"" }, + "machine_extruder_start_pos_abs": { "default_value": true }, + "machine_extruder_start_pos_x": { "default_value": 330 }, + "machine_extruder_start_pos_y": { "default_value": 237 }, + "machine_nozzle_head_distance": { "default_value": 2.7 }, + "machine_nozzle_offset_x": { "default_value": 0 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} \ No newline at end of file diff --git a/resources/extruders/ultimaker_s8_extruder_right.def.json b/resources/extruders/ultimaker_s8_extruder_right.def.json new file mode 100644 index 00000000000..7bab64fa676 --- /dev/null +++ b/resources/extruders/ultimaker_s8_extruder_right.def.json @@ -0,0 +1,31 @@ +{ + "version": 2, + "name": "Extruder 2", + "inherits": "fdmextruder", + "metadata": + { + "machine": "ultimaker_s8", + "position": "1" + }, + "overrides": + { + "extruder_nr": + { + "default_value": 1, + "maximum_value": "1" + }, + "extruder_prime_pos_x": { "default_value": 333 }, + "extruder_prime_pos_y": { "default_value": 6 }, + "extruder_prime_pos_z": { "default_value": 2 }, + "machine_extruder_end_pos_abs": { "default_value": true }, + "machine_extruder_end_pos_x": { "default_value": 330 }, + "machine_extruder_end_pos_y": { "default_value": 219 }, + "machine_extruder_start_code": { "value": "\"M214 K{material_pressure_advance_factor} R0.04\"" }, + "machine_extruder_start_pos_abs": { "default_value": true }, + "machine_extruder_start_pos_x": { "default_value": 330 }, + "machine_extruder_start_pos_y": { "default_value": 219 }, + "machine_nozzle_head_distance": { "default_value": 4.2 }, + "machine_nozzle_offset_x": { "default_value": 22 }, + "machine_nozzle_offset_y": { "default_value": 0 } + } +} \ No newline at end of file diff --git a/resources/images/UltimakerS8backplate.png b/resources/images/UltimakerS8backplate.png new file mode 100644 index 00000000000..d2a4488a739 Binary files /dev/null and b/resources/images/UltimakerS8backplate.png differ diff --git a/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..62554df3da0 --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_factor4 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.4 + +[values] +jerk_print = 30 +speed_print = 80 +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_strong.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_strong.inst.cfg new file mode 100644 index 00000000000..9ba6b62e09f --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm_strong.inst.cfg @@ -0,0 +1,19 @@ +[general] +definition = ultimaker_factor4 +name = Strong +version = 4 + +[metadata] +intent_category = strong +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.4 + +[values] +jerk_print = 30 +material_print_temperature = =default_material_print_temperature + 20 +speed_print = 80 +wall_thickness = =line_width * 4 + diff --git a/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..219381b2376 --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_factor4 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.6 + +[values] +jerk_print = 30 +speed_print = 80 +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_strong.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_strong.inst.cfg new file mode 100644 index 00000000000..9acf025ee74 --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm_strong.inst.cfg @@ -0,0 +1,19 @@ +[general] +definition = ultimaker_factor4 +name = Strong +version = 4 + +[metadata] +intent_category = strong +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.6 + +[values] +jerk_print = 30 +material_print_temperature = =default_material_print_temperature + 20 +speed_print = 80 +wall_thickness = =line_width * 4 + diff --git a/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..4ea4831a43f --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_factor4 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = HT 0.6 + +[values] +jerk_print = 30 +speed_print = 70 +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_strong.inst.cfg b/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_strong.inst.cfg new file mode 100644 index 00000000000..486c1ad5089 --- /dev/null +++ b/resources/intent/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm_strong.inst.cfg @@ -0,0 +1,19 @@ +[general] +definition = ultimaker_factor4 +name = Strong +version = 4 + +[metadata] +intent_category = strong +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = HT 0.6 + +[values] +jerk_print = 30 +material_print_temperature = =default_material_print_temperature + 20 +speed_print = 80 +wall_thickness = =line_width * 4 + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..ceaea619711 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..999bd8f446f --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..db28bfbbd22 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..e4b7059065f --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..615b8cebfc0 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..58982006e05 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..99e29b4e0e4 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..d49e6b2c4bb --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..f4cb207725f --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..ebff117f699 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..006364cdf8b --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_method +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..9245975b334 --- /dev/null +++ b/resources/intent/ultimaker_method/um_method_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_method +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..62cad2a4490 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..5dc61a3bf7f --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..992bf53bec6 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..dc598e393e0 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..f09c0b7d1d7 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..d5f3e29bdb9 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..f4aff3e626d --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..66f6e78e709 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..d8289c74abb --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..86be9fe49f1 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..865ccb543b2 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1XA + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..a3c157c6796 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1XA + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..aee7cf21095 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..69f53b486be --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..65d9f0bedba --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..0a4839f8270 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..80163868287 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodx +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..fc7227a9390 --- /dev/null +++ b/resources/intent/ultimaker_methodx/um_methodx_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,41 @@ +[general] +definition = ultimaker_methodx +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 47 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..4443aa67f9d --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..9bf79fb9144 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..95d648294f1 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..3960405bceb --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1a_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1A + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..6b4f8c3d1b9 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..8d5dfa70e3a --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..0f76d6c8d17 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..e62cbbd6181 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..3162a1886fc --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..2464d9871a3 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1c_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1C + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..8cfde623e58 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1XA + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..00340b79486 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 1XA + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..4cdcdcfcbae --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_pattern = zigzag +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..320409a90c6 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,38 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_absr_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +cool_min_temperature = 245.0 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +speed_layer_0 = 55 +speed_print = 300 +speed_support = 100 +speed_support_interface = 75 +speed_travel = 500 +speed_travel_layer_0 = 250 +speed_wall_0 = 40 +support_pattern = zigzag +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..b8f3f3ac37c --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..75e5ba97435 --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg new file mode 100644 index 00000000000..b0a5c2c531f --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeed.inst.cfg @@ -0,0 +1,34 @@ +[general] +definition = ultimaker_methodxl +name = High Speed +version = 4 + +[metadata] +intent_category = highspeed +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bridge_wall_speed = 300 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_pattern = zigzag +jerk_print = 35 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 + diff --git a/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg new file mode 100644 index 00000000000..e4d9f81a0ff --- /dev/null +++ b/resources/intent/ultimaker_methodxl/um_methodxl_labs_um-tough-pla-175_0.2mm_highspeedsolid.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_methodxl +name = High Speed Solid +version = 4 + +[metadata] +intent_category = highspeedsolid +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = LABS + +[values] +acceleration_print = 3500 +bottom_thickness = =top_bottom_thickness +bridge_wall_speed = 300 +build_volume_temperature = 45 +cool_fan_enabled = True +cool_fan_speed = 100 +cool_min_layer_time = 3 +infill_angles = [45,135] +infill_material_flow = 97 +infill_pattern = zigzag +infill_sparse_density = 99 +jerk_print = 35 +material_bed_temperature = 45 +speed_infill = 240.0 +speed_layer_0 = 55 +speed_print = 300 +speed_travel = 500 +speed_travel_layer_0 = 350.0 +speed_wall_0 = 45 +support_interface_line_width = 0.42 +support_line_width = 0.47 +support_material_flow = 100 +support_pattern = zigzag +support_roof_line_width = 0.42 +top_bottom_thickness = =layer_height * 2 +top_thickness = =top_bottom_thickness + diff --git a/resources/intent/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..2d373348d5e --- /dev/null +++ b/resources/intent/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_s3 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.4 + +[values] +jerk_print = 30 +speed_infill = =speed_print +speed_print = 30 +speed_topbottom = =speed_print +speed_wall = =speed_print +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..ae8ac6f8936 --- /dev/null +++ b/resources/intent/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_s3 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.6 + +[values] +jerk_print = 30 +speed_infill = =speed_print +speed_print = 30 +speed_topbottom = =speed_print +speed_wall = =speed_print +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..049616558df --- /dev/null +++ b/resources/intent/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_s5 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.4 + +[values] +jerk_print = 30 +speed_infill = =speed_print +speed_print = 30 +speed_topbottom = =speed_print +speed_wall = =speed_print +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..688a5d8f517 --- /dev/null +++ b/resources/intent/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,24 @@ +[general] +definition = ultimaker_s5 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC 0.6 + +[values] +jerk_print = 30 +speed_infill = =speed_print +speed_print = 30 +speed_topbottom = =speed_print +speed_wall = =speed_print +speed_wall_0 = =speed_wall +speed_wall_x = =speed_wall +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..20615ef3d5a --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_abs +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..3eb147fe6b0 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_cpe +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..4dbf74ddd04 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..44f110ae845 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_petg +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..681718eea1d --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_pla +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..52881053059 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_tough_pla +quality_type = draft +setting_version = 24 +type = intent +variant = AA+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..9b14738ac41 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_cpe_plus +quality_type = draft +setting_version = 24 +type = intent +variant = CC+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..515499980fd --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = intent +variant = CC+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..8bd73cb1550 --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_pc +quality_type = draft +setting_version = 24 +type = intent +variant = CC+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg new file mode 100644 index 00000000000..3f6edcec64b --- /dev/null +++ b/resources/intent/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm_engineering.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s8 +name = Accurate +version = 4 + +[metadata] +intent_category = engineering +material = generic_petcf +quality_type = draft +setting_version = 24 +type = intent +variant = CC+ 0.4 + +[values] +infill_sparse_density = 20 +top_bottom_thickness = =wall_thickness +wall_thickness = =line_width * 3 + diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm_draft.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm_draft.inst.cfg new file mode 100644 index 00000000000..de49fa0e2c1 --- /dev/null +++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm_draft.inst.cfg @@ -0,0 +1,54 @@ +[general] +definition = ultimaker_sketch_sprint +name = Draft +version = 4 + +[metadata] +intent_category = draft +is_experimental = True +material = ultimaker_pla_175 +quality_type = imperial +setting_version = 24 +type = intent +variant = 0.4mm + +[values] +acceleration_layer_0 = 5000 +acceleration_print = 20000 +acceleration_roofing = 5000 +acceleration_topbottom = 10000 +acceleration_travel_layer_0 = 5000 +acceleration_wall_0 = 5000.0 +acceleration_wall_0_roofing = 5000 +acceleration_wall_x = 10000 +acceleration_wall_x_roofing = 5000 +cool_fan_full_at_height = 0.54 +cool_min_layer_time = 2 +cool_min_speed = 50 +cool_min_temperature = 220 +infill_angles = [135] +infill_line_width = 0.4 +infill_overlap = 25 +infill_pattern = zigzag +infill_wipe_dist = 0.05 +initial_layer_line_width_factor = 125 +line_width = 0.4 +material_final_print_temperature = 225 +material_initial_print_temperature = 225 +material_print_temperature = 225 +retraction_hop_enabled = True +seam_overhang_angle = 25 +speed_layer_0 = 70 +speed_print = 270 +speed_roofing = 215 +speed_support_bottom = 100 +speed_support_interface = 215 +speed_topbottom = 215 +speed_wall = 215 +speed_wall_x = 270 +speed_wall_x_roofing = 270 +support_line_width = 0.35 +wall_line_width_x = 0.4 +wall_overhang_angle = 25 +wall_overhang_speed_factors = [15] + diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg new file mode 100644 index 00000000000..6a81905545a --- /dev/null +++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.2mm_visual.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_sketch_sprint +name = Visual +version = 4 + +[metadata] +intent_category = visual +is_experimental = True +material = ultimaker_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 0.4mm + +[values] +acceleration_roofing = 1500 +acceleration_wall_0_roofing = 1500 +acceleration_wall_x_roofing = 1500 +cool_min_temperature = 220.0 +hole_xy_offset = 0.2 +hole_xy_offset_max_diameter = 3 +inset_direction = inside_out +line_width = 0.4 +material_final_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_print_temperature = 220 +min_bead_width = 0.34 +min_wall_line_width = 0.34 +roofing_line_width = 0.35 +roofing_monotonic = False +roofing_pattern = lines +skin_monotonic = False +skin_outline_count = 0 +skin_overlap = 25 +small_feature_max_length = 25 +small_feature_speed_factor = 40 +small_hole_max_size = 4.5 +small_skin_width = 4 +speed_roofing = 100 +wall_line_width_x = 0.4 +z_seam_type = back + diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm_draft.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm_draft.inst.cfg new file mode 100644 index 00000000000..5c7c5de0ef7 --- /dev/null +++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm_draft.inst.cfg @@ -0,0 +1,54 @@ +[general] +definition = ultimaker_sketch_sprint +name = Draft +version = 4 + +[metadata] +intent_category = draft +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = imperial +setting_version = 24 +type = intent +variant = 0.4mm + +[values] +acceleration_layer_0 = 5000 +acceleration_print = 20000 +acceleration_roofing = 5000 +acceleration_topbottom = 10000 +acceleration_travel_layer_0 = 5000 +acceleration_wall_0 = 5000.0 +acceleration_wall_0_roofing = 5000 +acceleration_wall_x = 10000 +acceleration_wall_x_roofing = 5000 +cool_fan_full_at_height = 0.54 +cool_min_layer_time = 2 +cool_min_speed = 50 +cool_min_temperature = 220 +infill_angles = [135] +infill_line_width = 0.4 +infill_overlap = 25 +infill_pattern = zigzag +infill_wipe_dist = 0.05 +initial_layer_line_width_factor = 125 +line_width = 0.4 +material_final_print_temperature = 225 +material_initial_print_temperature = 225 +material_print_temperature = 225 +retraction_hop_enabled = True +seam_overhang_angle = 25 +speed_layer_0 = 70 +speed_print = 270 +speed_roofing = 215 +speed_support_bottom = 100 +speed_support_interface = 215 +speed_topbottom = 215 +speed_wall = 215 +speed_wall_x = 270 +speed_wall_x_roofing = 270 +support_line_width = 0.35 +wall_line_width_x = 0.4 +wall_overhang_angle = 25 +wall_overhang_speed_factors = [15] + diff --git a/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg new file mode 100644 index 00000000000..1635985b89f --- /dev/null +++ b/resources/intent/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.2mm_visual.inst.cfg @@ -0,0 +1,42 @@ +[general] +definition = ultimaker_sketch_sprint +name = Visual +version = 4 + +[metadata] +intent_category = visual +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = draft +setting_version = 24 +type = intent +variant = 0.4mm + +[values] +acceleration_roofing = 1500 +acceleration_wall_0_roofing = 1500 +acceleration_wall_x_roofing = 1500 +cool_min_temperature = 220.0 +hole_xy_offset = 0.2 +hole_xy_offset_max_diameter = 3 +inset_direction = inside_out +line_width = 0.4 +material_final_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_print_temperature = 220 +min_bead_width = 0.34 +min_wall_line_width = 0.34 +roofing_line_width = 0.35 +roofing_monotonic = False +roofing_pattern = lines +skin_monotonic = False +skin_outline_count = 0 +skin_overlap = 25 +small_feature_max_length = 25 +small_feature_speed_factor = 40 +small_hole_max_size = 4.5 +small_skin_width = 4 +speed_roofing = 100 +wall_line_width_x = 0.4 +z_seam_type = back + diff --git a/resources/qml/ActionPanel/OutputProcessWidget.qml b/resources/qml/ActionPanel/OutputProcessWidget.qml index 1303dc20a26..c609cd6ca51 100644 --- a/resources/qml/ActionPanel/OutputProcessWidget.qml +++ b/resources/qml/ActionPanel/OutputProcessWidget.qml @@ -10,7 +10,7 @@ import Cura 1.0 as Cura // This element contains all the elements the user needs to visualize the data -// that is gather after the slicing process, such as printint time, material usage, ... +// that is gather after the slicing process, such as printing time, material usage, ... // There are also two buttons: one to previsualize the output layers, and the other to // select what to do with it (such as print over network, save to file, ...) Column diff --git a/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml b/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml index bcbb6d76799..f76e1c6ef72 100644 --- a/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml +++ b/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml @@ -1,4 +1,4 @@ -// Copyright (c) 2018 Ultimaker B.V. +// Copyright (c) 2025 UltiMaker // Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.7 @@ -12,7 +12,7 @@ Button id: configurationItem property var configuration: null - hoverEnabled: isValidMaterial + hoverEnabled: isValidMaterial && isValidCore property bool isValidMaterial: { @@ -25,7 +25,6 @@ Button for (var index in extruderConfigurations) { var name = extruderConfigurations[index].material ? extruderConfigurations[index].material.name : "" - if (name == "" || name == "Unknown") { return false @@ -34,6 +33,25 @@ Button return true } + property bool isValidCore: + { + if (configuration === null) + { + return false + } + var extruderConfigurations = configuration.extruderConfigurations + var coresList = configuration.validCoresForPrinterType + for (var index in extruderConfigurations) + { + var name = extruderConfigurations[index].hotendID ? extruderConfigurations[index].hotendID : "" + if (name != "" && ! coresList.includes(name)) + { + return false + } + } + return true + } + background: Rectangle { color: parent.hovered ? UM.Theme.getColor("action_button_hovered") : UM.Theme.getColor("action_button") @@ -60,7 +78,7 @@ Button right: parent.right rightMargin: UM.Theme.getSize("wide_margin").width } - height: childrenRect.height + height: unknownMaterial.visible ? unknownMaterial.height : (repeater.count > 0 ? repeater.itemAt(0).height : 0) spacing: UM.Theme.getSize("default_margin").width Repeater @@ -72,21 +90,20 @@ Button { width: Math.round(parent.width / (configuration !== null ? configuration.extruderConfigurations.length : 1)) printCoreConfiguration: modelData - visible: configurationItem.isValidMaterial + visible: configurationItem.isValidMaterial && configurationItem.isValidCore } } - // Unknown material + // Unknown material or core ('variant') Item { id: unknownMaterial - height: unknownMaterialMessage.height + UM.Theme.getSize("thin_margin").width / 2 + height: unknownMaterialMessage.height width: parent.width anchors.top: parent.top - anchors.topMargin: UM.Theme.getSize("thin_margin").width / 2 - visible: !configurationItem.isValidMaterial + visible: ! (configurationItem.isValidMaterial && configurationItem.isValidCore) UM.ColorImage { @@ -102,13 +119,9 @@ Button UM.Label { id: unknownMaterialMessage - text: - { - if (configuration === null) - { - return "" - } + function whenUnknownMaterial() + { var extruderConfigurations = configuration.extruderConfigurations var unknownMaterials = [] for (var index in extruderConfigurations) @@ -135,9 +148,47 @@ Button unknownMaterials = "" + unknownMaterials + "" var draftResult = catalog.i18nc("@label", "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."); - var result = draftResult.arg(unknownMaterials).arg("" + catalog.i18nc("@label","Marketplace") + " ") + return draftResult.arg(unknownMaterials).arg("" + catalog.i18nc("@label","Marketplace") + " ") + } + + function whenMismatchedCore() + { + var extruderConfigurations = configuration.extruderConfigurations + var coresList = configuration.validCoresForPrinterType + var mismatchedCores = [] + for (var index in extruderConfigurations) + { + var name = extruderConfigurations[index].hotendID ? extruderConfigurations[index].hotendID : "" + if (name != "" && ! coresList.includes(name)) + { + mismatchedCores.push(name) + } + } + + mismatchedCores = "" + mismatchedCores + "" + var draftResult = catalog.i18nc("@label", "This configuration is not available because there is a mismatch or other problem with core-type %1. Please visit %2 to check which cores this printer-type supports w.r.t. new slices."); + return draftResult.arg(mismatchedCores).arg("" + catalog.i18nc("@label","WEBSITE") + " ") + } + + text: + { + if (configuration === null) + { + return "" + } + + var extruderConfigurations = configuration.extruderConfigurations + var perExtruder = [] + for (var index in extruderConfigurations) + { + var matName = extruderConfigurations[index].material ? extruderConfigurations[index].material.name : "" + var coreName = extruderConfigurations[index].hotendID ? extruderConfigurations[index].hotendID : "" + perExtruder.push(` [${coreName}/${matName}]`) + } - return result + var configsStr = "" + perExtruder + "" + var warnStr = isValidMaterial ? whenMismatchedCore() : whenUnknownMaterial() + return configsStr + "
" + warnStr } width: extruderRow.width @@ -225,7 +276,7 @@ Button onClicked: { - if(isValidMaterial) + if (isValidMaterial && isValidCore) { toggleContent() Cura.MachineManager.applyRemoteConfiguration(configuration) diff --git a/resources/qml/Menus/RecentFilesMenu.qml b/resources/qml/Menus/RecentFilesMenu.qml index 19ff6812198..93fddd0bf69 100644 --- a/resources/qml/Menus/RecentFilesMenu.qml +++ b/resources/qml/Menus/RecentFilesMenu.qml @@ -2,7 +2,7 @@ // Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 -import QtQuick.Controls 2.1 +import QtQuick.Controls 2.15 import UM 1.3 as UM import Cura 1.0 as Cura @@ -30,6 +30,6 @@ Cura.Menu onTriggered: CuraApplication.readLocalFile(modelData) } onObjectAdded: (index, object) => menu.insertItem(index, object) - onObjectRemoved: (object) => menu.removeItem(object) + onObjectRemoved: (index, object) => menu.removeItem(object) } } diff --git a/resources/qml/Preferences/GeneralPage.qml b/resources/qml/Preferences/GeneralPage.qml index a686fca8e54..62cab53a78d 100644 --- a/resources/qml/Preferences/GeneralPage.qml +++ b/resources/qml/Preferences/GeneralPage.qml @@ -669,12 +669,12 @@ UM.PreferencesPage { width: childrenRect.width height: childrenRect.height - text: catalog.i18nc("@info:tooltip", "Should the Y axis of the translate toolhandle be flipped?") + text: catalog.i18nc("@info:tooltip", "Should the Y axis of the translate toolhandle be flipped? This will only affect model's Y coordinate, all other settings such as machine Printhead settings are unaffected and still behave as before.") UM.CheckBox { id: flipToolhandleYCheckbox - text: catalog.i18nc("@option:check", "Flip toolhandle Y axis") + text: catalog.i18nc("@option:check", "Flip model's toolhandle Y axis (restart required)") checked: boolCheck(UM.Preferences.getValue("tool/flip_y_axis_tool_handle")) onCheckedChanged: UM.Preferences.setValue("tool/flip_y_axis_tool_handle", checked) } diff --git a/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml b/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml index 254ba477bf7..c1b36676c79 100644 --- a/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml +++ b/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml @@ -57,7 +57,9 @@ RecommendedSettingSection settingName: "support_structure" propertyRemoveUnusedValue: false updateAllExtruders: false - defaultExtruderIndex: supportExtruderProvider.properties.value + defaultExtruderIndex: supportExtruderProvider.properties.value != undefined ? + supportExtruderProvider.properties.value : + Cura.ExtruderManager.activeExtruderIndex } }, RecommendedSettingItem @@ -92,7 +94,9 @@ RecommendedSettingSection width: parent.width settingName: "support_type" updateAllExtruders: true - defaultExtruderIndex: supportExtruderProvider.properties.value + defaultExtruderIndex: supportExtruderProvider.properties.value != undefined ? + supportExtruderProvider.properties.value : + Cura.ExtruderManager.activeExtruderIndex } } ] diff --git a/resources/qml/Settings/SettingItem.qml b/resources/qml/Settings/SettingItem.qml index 1d8ad654e31..f46c59ff618 100644 --- a/resources/qml/Settings/SettingItem.qml +++ b/resources/qml/Settings/SettingItem.qml @@ -13,7 +13,7 @@ import "." Item { id: base - height: enabled ? UM.Theme.getSize("section").height + UM.Theme.getSize("narrow_margin").height : 0 + height: enabled ? Math.max(UM.Theme.getSize("section").height, label.height) + UM.Theme.getSize("narrow_margin").height : 0 anchors.left: parent.left anchors.right: parent.right diff --git a/resources/quality/flsun_v400/flsun_v400_normal.inst.cfg b/resources/quality/flsun_v400/flsun_v400_normal.inst.cfg index 50ed6266a08..d058a2d219c 100644 --- a/resources/quality/flsun_v400/flsun_v400_normal.inst.cfg +++ b/resources/quality/flsun_v400/flsun_v400_normal.inst.cfg @@ -115,7 +115,7 @@ travel_avoid_other_parts = True travel_avoid_supports = True travel_retract_before_outer_wall = False wall_overhang_angle = 35.0 -wall_overhang_speed_factor = 60.0 +wall_overhang_speed_factors = [60] wall_thickness = =line_width*2 z_seam_corner = z_seam_corner_inner z_seam_position = backright diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg index ac9f6dfdfbf..fc53fad7a9a 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.15mm.inst.cfg @@ -13,7 +13,7 @@ weight = -1 [values] brim_replaces_support = False -build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 +build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg index 98963265742..efc90a9b972 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg @@ -13,7 +13,7 @@ weight = 0 [values] brim_replaces_support = False -build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 +build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg index 14da349fa44..dd45df01a2b 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg @@ -13,7 +13,7 @@ weight = -2 [values] brim_replaces_support = False -build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 +build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True diff --git a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg index 9f1a9ace9f7..fd90f1d5a25 100644 --- a/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg @@ -13,7 +13,7 @@ weight = -3 [values] brim_replaces_support = False -build_volume_temperature = =50 if extruders_enabled_count > 1 else 35 +build_volume_temperature = =40 if extruders_enabled_count > 1 else 35 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 gradual_flow_discretisation_step_size = 0.1 gradual_flow_enabled = True diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..08eeaa85832 --- /dev/null +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.4_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,20 @@ +[general] +definition = ultimaker_factor4 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.4 +weight = -2 + +[values] +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +inset_direction = outside_in +max_flow_acceleration = 1 +skin_material_flow = =material_flow * 0.965 + diff --git a/resources/quality/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..f7f929efe07 --- /dev/null +++ b/resources/quality/ultimaker_factor4/um_f4_cc0.6_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,20 @@ +[general] +definition = ultimaker_factor4 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.6 +weight = -2 + +[values] +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +inset_direction = outside_in +max_flow_acceleration = 1 +skin_material_flow = =material_flow * 0.965 + diff --git a/resources/quality/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..cadc8d2db86 --- /dev/null +++ b/resources/quality/ultimaker_factor4/um_f4_ht0.6_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,20 @@ +[general] +definition = ultimaker_factor4 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = HT 0.6 +weight = -2 + +[values] +gradual_flow_discretisation_step_size = 0.1 +gradual_flow_enabled = True +inset_direction = outside_in +max_flow_acceleration = 1 +skin_material_flow = =material_flow * 0.965 + diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg index 4f5ae8282da..cf7eab6e73e 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg index 0ff8f110910..f0eafdde7ed 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-abscf-175_0.2mm.inst.cfg @@ -52,5 +52,5 @@ support_xy_distance = 0.3 support_xy_distance_overhang = 0.25 support_z_distance = 0.15 wall_overhang_angle = 30 -wall_overhang_speed_factor = 50 +wall_overhang_speed_factors = [50] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg index ff1861c6956..057ae522edd 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-absr-175_0.2mm.inst.cfg @@ -58,5 +58,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg index fe6c6fa10c4..7e03bcd23ca 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1c_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg index 45e11f5e9d8..f2a60264b19 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg index 18b44fda57a..e87533888b1 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-absr-175_0.2mm.inst.cfg @@ -58,5 +58,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg index 774b8fb2a8c..1ad566527fe 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_1xa_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg index e9d09c2c34c..795235c75e3 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg @@ -54,5 +54,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.22 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg index a5f7d05d6ed..c4ab6ee1155 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg index 56e2126cb2e..25dbd1868aa 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-abscf-175_0.2mm.inst.cfg @@ -52,5 +52,5 @@ support_xy_distance = 0.3 support_xy_distance_overhang = 0.25 support_z_distance = 0.15 wall_overhang_angle = 30 -wall_overhang_speed_factor = 50 +wall_overhang_speed_factors = [50] diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg index 7447dc5085d..8b19d722d4e 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-absr-175_0.2mm.inst.cfg @@ -58,5 +58,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg index d2f64e3b656..c19ff979bfd 100644 --- a/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodx/um_methodx_labs_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg index caf364adc90..fe70d6d0c62 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg index e4a889749a3..d4d053df9f9 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-abscf-175_0.2mm.inst.cfg @@ -54,5 +54,5 @@ support_xy_distance = 0.3 support_xy_distance_overhang = 0.25 support_z_distance = 0.15 wall_overhang_angle = 30 -wall_overhang_speed_factor = 50 +wall_overhang_speed_factors = [50] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg index a08dd10302e..29b3de7eac4 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-absr-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg index 420a7192352..a3b23179cb7 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1c_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg index 39b7d69230b..e31448572eb 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg index 84086e1856d..3596d120959 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-absr-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg index 155696925f4..5d3c07cde91 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_1xa_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg index a075d5ffe60..29433f83875 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_polymaker-polymax-pc-175_0.2mm.inst.cfg @@ -54,5 +54,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.22 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg index 3309bb6660e..627ff55215f 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abs-175_0.2mm.inst.cfg @@ -59,5 +59,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg index 6596cdd4df9..71bcca17c01 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-abscf-175_0.2mm.inst.cfg @@ -54,5 +54,5 @@ support_xy_distance = 0.3 support_xy_distance_overhang = 0.25 support_z_distance = 0.15 wall_overhang_angle = 30 -wall_overhang_speed_factor = 50 +wall_overhang_speed_factors = [50] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg index e7a46cdcee2..fa7a1b5e56b 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-absr-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg index 972840dde0c..d9f9ba645e0 100644 --- a/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-asa-175_0.2mm.inst.cfg @@ -57,5 +57,5 @@ support_xy_overrides_z = xy_overrides_z support_z_distance = 0.15 top_skin_expand_distance = 2.4 wall_overhang_angle = 30 -wall_overhang_speed_factor = 40 +wall_overhang_speed_factors = [40] diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..ee2493352d8 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s3 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.4 +weight = -2 + +[values] +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..1fc2f2c8d96 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s3 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.6 +weight = -2 + +[values] +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..9b628d1cbb8 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s5 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.4 +weight = -2 + +[values] +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..4331ec48f49 --- /dev/null +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,18 @@ +[general] +definition = ultimaker_s5 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC 0.6 +weight = -2 + +[values] +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg new file mode 100644 index 00000000000..0e439932b41 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_abs_0.2mm.inst.cfg @@ -0,0 +1,21 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_abs +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +cool_min_layer_time = 4 +cool_min_layer_time_fan_speed_max = 9 +cool_min_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature + 5 +retraction_prime_speed = 15 +support_structure = tree + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg new file mode 100644 index 00000000000..33c4b43330c --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_cpe_0.2mm.inst.cfg @@ -0,0 +1,20 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_cpe +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +infill_overlap = 20 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'gyroid' +speed_print = 100 +speed_wall_0 = =speed_print +support_interface_enable = True + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm.inst.cfg new file mode 100644 index 00000000000..ccc625a05dc --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_nylon_0.2mm.inst.cfg @@ -0,0 +1,20 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_nylon +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +cool_min_layer_time = 6 +cool_min_layer_time_fan_speed_max = 11 +material_print_temperature = =default_material_print_temperature + 5 +raft_airgap = 0.4 +retraction_prime_speed = 15 + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg new file mode 100644 index 00000000000..2698357d081 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_petg_0.2mm.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_petg +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +cool_min_layer_time = 4 +material_print_temperature = =default_material_print_temperature + 5 + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg new file mode 100644 index 00000000000..b6013b83167 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.1mm.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = Fine +version = 4 + +[metadata] +material = generic_pla +quality_type = normal +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = 0 + +[values] +retraction_prime_speed = =retraction_speed +support_structure = tree + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg new file mode 100644 index 00000000000..e9c3b1fb984 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pla_0.2mm.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_pla +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +retraction_prime_speed = =retraction_speed +support_structure = tree + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pp_0.2mm.inst.cfg new file mode 100644 index 00000000000..817dcb00f4d --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_pp_0.2mm.inst.cfg @@ -0,0 +1,45 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_pp +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +brim_width = 20 +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' +infill_wipe_dist = 0.1 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 10 +material_print_temperature = =default_material_print_temperature + 8 +multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_size = 16 +prime_tower_wipe_enabled = True +retraction_count_max = 15 +retraction_extra_prime_amount = 0.8 +retraction_hop = 2 +retraction_hop_only_when_collides = True +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_interface_enable = True +support_top_distance = =support_z_distance +support_z_distance = 0.3 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg new file mode 100644 index 00000000000..faefa8932db --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.1mm.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = Fine +version = 4 + +[metadata] +material = generic_tough_pla +quality_type = normal +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = 0 + +[values] +retraction_prime_speed = =retraction_speed +support_structure = tree + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg new file mode 100644 index 00000000000..31da96735d4 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tough-pla_0.2mm.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_tough_pla +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +retraction_prime_speed = =retraction_speed +support_structure = tree + diff --git a/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tpu_0.2mm.inst.cfg new file mode 100644 index 00000000000..bc7e0a4548a --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_aa_plus_0.4_tpu_0.2mm.inst.cfg @@ -0,0 +1,53 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_tpu +quality_type = draft +setting_version = 24 +type = quality +variant = AA+ 0.4 +weight = -2 + +[values] +bridge_skin_material_flow = 200 +bridge_skin_speed = =bridge_wall_speed +bridge_sparse_infill_max_density = 50 +bridge_wall_material_flow = =bridge_skin_material_flow +bridge_wall_speed = 10 +brim_width = 8.75 +gradual_infill_step_height = =5 * layer_height +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' +infill_sparse_density = 10 +infill_wipe_dist = 0.1 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature - 10 +material_flow = 106 +material_initial_print_temperature = =material_print_temperature - 10 +multiple_mesh_overlap = 0 +prime_tower_wipe_enabled = True +retraction_count_max = 15 +retraction_extra_prime_amount = 0.8 +retraction_hop_only_when_collides = True +retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 0.8) +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_interface_enable = True +support_top_distance = =support_z_distance +support_z_distance = =math.ceil(0.3/layer_height)*layer_height +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = =layer_height * 6 +travel_avoid_distance = 1.5 +wall_0_inset = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.15mm.inst.cfg new file mode 100644 index 00000000000..b21e40a2100 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.15mm.inst.cfg @@ -0,0 +1,32 @@ +[general] +definition = ultimaker_s8 +name = Normal +version = 4 + +[metadata] +material = generic_bam +quality_type = fast +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -1 + +[values] +brim_replaces_support = False +build_volume_temperature = =50 if extruders_enabled_count > 1 else 24 +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +speed_print = 80 +speed_topbottom = =math.ceil(speed_print * 30 / 80) +speed_wall = =math.ceil(speed_print * 40 / 80) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +support_angle = 45 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_infill_sparse_thickness = =2 * layer_height +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_enable = True +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +top_bottom_thickness = 1 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.1mm.inst.cfg new file mode 100644 index 00000000000..aab94053791 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.1mm.inst.cfg @@ -0,0 +1,28 @@ +[general] +definition = ultimaker_s8 +name = Fine +version = 4 + +[metadata] +material = generic_bam +quality_type = normal +setting_version = 24 +type = quality +variant = BB 0.4 +weight = 0 + +[values] +brim_replaces_support = False +build_volume_temperature = =50 if extruders_enabled_count > 1 else 24 +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +support_angle = 45 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_infill_sparse_thickness = =2 * layer_height +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_enable = True +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +top_bottom_thickness = 1 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.2mm.inst.cfg new file mode 100644 index 00000000000..2dabc84da08 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.2mm.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_bam +quality_type = draft +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -2 + +[values] +brim_replaces_support = False +build_volume_temperature = =50 if extruders_enabled_count > 1 else 24 +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +support_angle = 45 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_enable = True +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +top_bottom_thickness = 1 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.3mm.inst.cfg new file mode 100644 index 00000000000..faca26af709 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_bam_0.3mm.inst.cfg @@ -0,0 +1,31 @@ +[general] +definition = ultimaker_s8 +name = Extra Fast +version = 4 + +[metadata] +material = generic_bam +quality_type = verydraft +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -3 + +[values] +brim_replaces_support = False +build_volume_temperature = =50 if extruders_enabled_count > 1 else 24 +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +support_angle = 45 +support_bottom_distance = 0.3 +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_enable = True +support_top_distance = 0.3 +top_bottom_thickness = 1 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg new file mode 100644 index 00000000000..11018f2d0db --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.15mm.inst.cfg @@ -0,0 +1,29 @@ +[general] +definition = ultimaker_s8 +name = Normal +version = 4 + +[metadata] +material = generic_pva +quality_type = fast +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -1 + +[values] +acceleration_prime_tower = 1500 +brim_replaces_support = False +build_volume_temperature = =70 if extruders_enabled_count > 1 else 35 +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +initial_layer_line_width_factor = 150 +minimum_support_area = 4 +retraction_count_max = 5 +skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) +speed_prime_tower = 25 +speed_support = 50 +support_infill_sparse_thickness = =2 * layer_height +support_interface_enable = True +support_z_distance = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg new file mode 100644 index 00000000000..04288783c0d --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.1mm.inst.cfg @@ -0,0 +1,30 @@ +[general] +definition = ultimaker_s8 +name = Fine +version = 4 + +[metadata] +material = generic_pva +quality_type = normal +setting_version = 24 +type = quality +variant = BB 0.4 +weight = 0 + +[values] +acceleration_prime_tower = 1500 +brim_replaces_support = False +build_volume_temperature = =70 if extruders_enabled_count > 1 else 35 +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +initial_layer_line_width_factor = 150 +material_print_temperature = =default_material_print_temperature - 5 +minimum_support_area = 4 +retraction_count_max = 5 +skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) +speed_prime_tower = 25 +speed_support = 50 +support_infill_sparse_thickness = =2 * layer_height +support_interface_enable = True +support_z_distance = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg new file mode 100644 index 00000000000..b46377615c1 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.2mm.inst.cfg @@ -0,0 +1,29 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_pva +quality_type = draft +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -2 + +[values] +acceleration_prime_tower = 1500 +brim_replaces_support = False +build_volume_temperature = =70 if extruders_enabled_count > 1 else 35 +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +initial_layer_line_width_factor = 150 +material_print_temperature = =default_material_print_temperature + 5 +minimum_support_area = 4 +retraction_count_max = 5 +skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) +speed_prime_tower = 25 +speed_support = 50 +support_interface_enable = True +support_z_distance = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg new file mode 100644 index 00000000000..aeee8fce19f --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_bb0.4_pva_0.3mm.inst.cfg @@ -0,0 +1,30 @@ +[general] +definition = ultimaker_s8 +name = Extra Fast +version = 4 + +[metadata] +material = generic_pva +quality_type = verydraft +setting_version = 24 +type = quality +variant = BB 0.4 +weight = -3 + +[values] +acceleration_prime_tower = 1500 +brim_replaces_support = False +build_volume_temperature = =70 if extruders_enabled_count > 1 else 35 +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) +default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60 +initial_layer_line_width_factor = 150 +material_print_temperature = =default_material_print_temperature - 5 +minimum_support_area = 4 +retraction_count_max = 5 +skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) +speed_prime_tower = 25 +speed_support = 50 +support_infill_sparse_thickness = 0.3 +support_interface_enable = True +support_z_distance = 0 + diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm.inst.cfg new file mode 100644 index 00000000000..527d67fe42f --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_cpe-plus_0.2mm.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_cpe_plus +quality_type = draft +setting_version = 24 +type = quality +variant = CC+ 0.4 +weight = -2 + +[values] + diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg new file mode 100644 index 00000000000..1d02c32213a --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_nylon-cf-slide_0.2mm.inst.cfg @@ -0,0 +1,16 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_nylon-cf-slide +quality_type = draft +setting_version = 24 +type = quality +variant = CC+ 0.4 +weight = -2 + +[values] +cool_min_layer_time_fan_speed_max = 11 + diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg new file mode 100644 index 00000000000..f7b6ee2dd36 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_pc_0.2mm.inst.cfg @@ -0,0 +1,19 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_pc +quality_type = draft +setting_version = 24 +type = quality +variant = CC+ 0.4 +weight = -2 + +[values] +cool_min_layer_time = 6 +cool_min_layer_time_fan_speed_max = 12 +retraction_amount = 8 +retraction_prime_speed = 15 + diff --git a/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg new file mode 100644 index 00000000000..6c5d6eb0ee8 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_cc_plus_0.4_petcf_0.2mm.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +material = generic_petcf +quality_type = draft +setting_version = 24 +type = quality +variant = CC+ 0.4 +weight = -2 + +[values] + diff --git a/resources/quality/ultimaker_s8/um_s8_global_Draft_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_Draft_Quality.inst.cfg new file mode 100644 index 00000000000..26b5eb23b08 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_Draft_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Fast +version = 4 + +[metadata] +global_quality = True +quality_type = draft +setting_version = 24 +type = quality +weight = -2 + +[values] +layer_height = =round(0.2 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_s8/um_s8_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_Fast_Quality.inst.cfg new file mode 100644 index 00000000000..8a5c2a9bc8b --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_Fast_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Normal +version = 4 + +[metadata] +global_quality = True +quality_type = fast +setting_version = 24 +type = quality +weight = -1 + +[values] +layer_height = =round(0.15 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_s8/um_s8_global_High_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_High_Quality.inst.cfg new file mode 100644 index 00000000000..97fa321038f --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_High_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Extra Fine +version = 4 + +[metadata] +global_quality = True +quality_type = high +setting_version = 24 +type = quality +weight = 1 + +[values] +layer_height = =round(0.06 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_s8/um_s8_global_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_Normal_Quality.inst.cfg new file mode 100644 index 00000000000..7caa0deaf38 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_Normal_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Fine +version = 4 + +[metadata] +global_quality = True +quality_type = normal +setting_version = 24 +type = quality +weight = 0 + +[values] +layer_height = =round(0.1 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_s8/um_s8_global_Superdraft_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_Superdraft_Quality.inst.cfg new file mode 100644 index 00000000000..b104169fb06 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_Superdraft_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Sprint +version = 4 + +[metadata] +global_quality = True +quality_type = superdraft +setting_version = 24 +type = quality +weight = -4 + +[values] +layer_height = =round(0.4 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_s8/um_s8_global_Verydraft_Quality.inst.cfg b/resources/quality/ultimaker_s8/um_s8_global_Verydraft_Quality.inst.cfg new file mode 100644 index 00000000000..4729b267c14 --- /dev/null +++ b/resources/quality/ultimaker_s8/um_s8_global_Verydraft_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_s8 +name = Extra Fast +version = 4 + +[metadata] +global_quality = True +quality_type = verydraft +setting_version = 24 +type = quality +weight = -3 + +[values] +layer_height = =round(0.3 * material_shrinkage_percentage_z / 100, 5) + diff --git a/resources/quality/ultimaker_sketch/um_sketch_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_sketch/um_sketch_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..7e3fa34166e --- /dev/null +++ b/resources/quality/ultimaker_sketch/um_sketch_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_sketch +name = Fast +version = 4 + +[metadata] +material = ultimaker_metallic_pla_175 +quality_type = draft +setting_version = 24 +type = quality +variant = 0.4mm +weight = -2 + +[values] + diff --git a/resources/quality/ultimaker_sketch_large/um_sketch_large_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_sketch_large/um_sketch_large_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..b9ea5d2aecb --- /dev/null +++ b/resources/quality/ultimaker_sketch_large/um_sketch_large_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_sketch_large +name = Fast +version = 4 + +[metadata] +material = ultimaker_metallic_pla_175 +quality_type = draft +setting_version = 24 +type = quality +variant = 0.4mm +weight = -2 + +[values] + diff --git a/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg new file mode 100644 index 00000000000..6cad373043a --- /dev/null +++ b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-metallic-pla-175_0.2mm.inst.cfg @@ -0,0 +1,28 @@ +[general] +definition = ultimaker_sketch_sprint +name = Fast +version = 4 + +[metadata] +material = ultimaker_metallic_pla_175 +quality_type = draft +setting_version = 24 +type = quality +variant = 0.4mm +weight = -2 + +[values] +cool_min_temperature = 230 +infill_angles = [45,45,45,45,45,135,135,135,135,135] +material_final_print_temperature = 230 +material_initial_print_temperature = 230 +speed_print = 125 +speed_roofing = 100 +speed_support_bottom = 100 +speed_support_interface = 125 +speed_topbottom = 100 +speed_wall = 75 +speed_wall_x = 100 +support_material_flow = 92 +wall_overhang_speed_factors = [23] + diff --git a/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm.inst.cfg b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm.inst.cfg new file mode 100644 index 00000000000..f084bc17916 --- /dev/null +++ b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-pla-175_0.27mm.inst.cfg @@ -0,0 +1,16 @@ +[general] +definition = ultimaker_sketch_sprint +name = Extra Fast - Experimental +version = 4 + +[metadata] +is_experimental = True +material = ultimaker_pla_175 +quality_type = imperial +setting_version = 24 +type = quality +variant = 0.4mm +weight = -3 + +[values] + diff --git a/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm.inst.cfg b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm.inst.cfg new file mode 100644 index 00000000000..1d7584fd7ad --- /dev/null +++ b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_0.4mm_um-tough-pla-175_0.27mm.inst.cfg @@ -0,0 +1,23 @@ +[general] +definition = ultimaker_sketch_sprint +name = Extra Fast - Experimental +version = 4 + +[metadata] +is_experimental = True +material = ultimaker_tough_pla_175 +quality_type = imperial +setting_version = 24 +type = quality +variant = 0.4mm +weight = -3 + +[values] +acceleration_layer_0 = 200 +acceleration_travel_layer_0 = =acceleration_layer_0 +speed_layer_0 = 30 +speed_slowdown_layers = 4 +speed_travel_layer_0 = 150 +wall_0_material_flow_layer_0 = =material_flow * 1.03 +wall_x_material_flow_layer_0 = =material_flow * 0.95 + diff --git a/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_global_Imperial_Quality.inst.cfg b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_global_Imperial_Quality.inst.cfg new file mode 100644 index 00000000000..bef8501e675 --- /dev/null +++ b/resources/quality/ultimaker_sketch_sprint/um_sketch_sprint_global_Imperial_Quality.inst.cfg @@ -0,0 +1,15 @@ +[general] +definition = ultimaker_sketch_sprint +name = Extra Fast +version = 4 + +[metadata] +global_quality = True +quality_type = imperial +setting_version = 24 +type = quality +weight = -2 + +[values] +layer_height = 0.27 + diff --git a/resources/quality/voron2/voron2_v6_0.25_ASA_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_ASA_extrafine.inst.cfg index d89894647cb..9819984b71a 100644 --- a/resources/quality/voron2/voron2_v6_0.25_ASA_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_ASA_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_ASA_fast.inst.cfg index e3d0252d492..05d0a504e90 100644 --- a/resources/quality/voron2/voron2_v6_0.25_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_ASA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_ASA_fine.inst.cfg index ab3e3e17ea2..e1111c1026b 100644 --- a/resources/quality/voron2/voron2_v6_0.25_ASA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_ASA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_ASA_normal.inst.cfg index b9e9565c3c0..b4e2f497797 100644 --- a/resources/quality/voron2/voron2_v6_0.25_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_PVA_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_PVA_extrafine.inst.cfg index 991ac5d1010..10f80e47852 100644 --- a/resources/quality/voron2/voron2_v6_0.25_PVA_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_PVA_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_PVA_fast.inst.cfg index e148d1c4b65..c84b36660ba 100644 --- a/resources/quality/voron2/voron2_v6_0.25_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_PVA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_PVA_fine.inst.cfg index 9b9a0ffee9f..c6eb62e1b6b 100644 --- a/resources/quality/voron2/voron2_v6_0.25_PVA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_PVA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_PVA_normal.inst.cfg index d134c72fdb7..f2e5706e310 100644 --- a/resources/quality/voron2/voron2_v6_0.25_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_TPU_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_TPU_extrafine.inst.cfg index e7b6b714fb6..9324b9ba0e7 100644 --- a/resources/quality/voron2/voron2_v6_0.25_TPU_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_TPU_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_TPU_fast.inst.cfg index a93e0bd832d..862586934ed 100644 --- a/resources/quality/voron2/voron2_v6_0.25_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_TPU_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_TPU_fine.inst.cfg index ee2404bc086..ee753c59cff 100644 --- a/resources/quality/voron2/voron2_v6_0.25_TPU_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_TPU_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.25_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.25_TPU_normal.inst.cfg index 6931141a6fa..35054797742 100644 --- a/resources/quality/voron2/voron2_v6_0.25_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.25_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.25mm diff --git a/resources/quality/voron2/voron2_v6_0.30_ASA_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_ASA_extrafine.inst.cfg index 895ff9daf49..dcf9a6fe45c 100644 --- a/resources/quality/voron2/voron2_v6_0.30_ASA_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_ASA_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_ASA_fast.inst.cfg index f10be46a983..b79bb0e0966 100644 --- a/resources/quality/voron2/voron2_v6_0.30_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_ASA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_ASA_fine.inst.cfg index 2b7356f1a55..0d85a07e9c3 100644 --- a/resources/quality/voron2/voron2_v6_0.30_ASA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_ASA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_ASA_normal.inst.cfg index 542b8d29869..734e32367ce 100644 --- a/resources/quality/voron2/voron2_v6_0.30_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_PVA_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_PVA_extrafine.inst.cfg index 2ce1651a4c8..97c131f56ba 100644 --- a/resources/quality/voron2/voron2_v6_0.30_PVA_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_PVA_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_PVA_fast.inst.cfg index cac8e008e96..3da38499eed 100644 --- a/resources/quality/voron2/voron2_v6_0.30_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_PVA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_PVA_fine.inst.cfg index 616a9537c80..aaa65f6439f 100644 --- a/resources/quality/voron2/voron2_v6_0.30_PVA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_PVA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_PVA_normal.inst.cfg index 75ed433d4cd..cd98f31944f 100644 --- a/resources/quality/voron2/voron2_v6_0.30_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_TPU_extrafine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_TPU_extrafine.inst.cfg index 217caf56592..c8bfbf11a34 100644 --- a/resources/quality/voron2/voron2_v6_0.30_TPU_extrafine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_TPU_extrafine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_TPU_fast.inst.cfg index bd067c1827e..e14363b52db 100644 --- a/resources/quality/voron2/voron2_v6_0.30_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_TPU_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_TPU_fine.inst.cfg index 05000e8e19e..c476909acf2 100644 --- a/resources/quality/voron2/voron2_v6_0.30_TPU_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_TPU_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.30_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.30_TPU_normal.inst.cfg index a9347074515..376ddc9f116 100644 --- a/resources/quality/voron2/voron2_v6_0.30_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.30_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.30mm diff --git a/resources/quality/voron2/voron2_v6_0.35_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_ASA_fast.inst.cfg index 49bdf430a35..dbac6990bff 100644 --- a/resources/quality/voron2/voron2_v6_0.35_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_ASA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_ASA_fine.inst.cfg index 531dcb8b391..990496f4d96 100644 --- a/resources/quality/voron2/voron2_v6_0.35_ASA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_ASA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_ASA_normal.inst.cfg index 656d982e010..3a58e94bc17 100644 --- a/resources/quality/voron2/voron2_v6_0.35_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_PVA_fast.inst.cfg index 3b0eb953ba1..13b1d6c2f07 100644 --- a/resources/quality/voron2/voron2_v6_0.35_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_PVA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_PVA_fine.inst.cfg index 51128170f46..21843a75c97 100644 --- a/resources/quality/voron2/voron2_v6_0.35_PVA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_PVA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_PVA_normal.inst.cfg index 00ba1c82677..9b982421ed7 100644 --- a/resources/quality/voron2/voron2_v6_0.35_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_TPU_fast.inst.cfg index 57751118f94..633abd8caa0 100644 --- a/resources/quality/voron2/voron2_v6_0.35_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_TPU_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_TPU_fine.inst.cfg index 4016f5584e6..fe16e614b00 100644 --- a/resources/quality/voron2/voron2_v6_0.35_TPU_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_TPU_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.35_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.35_TPU_normal.inst.cfg index b7474b0cbd1..bb5a5abf6c3 100644 --- a/resources/quality/voron2/voron2_v6_0.35_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.35_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.35mm diff --git a/resources/quality/voron2/voron2_v6_0.40_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_ASA_extrafast.inst.cfg index de76119db32..8820ff968cb 100644 --- a/resources/quality/voron2/voron2_v6_0.40_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_ASA_fast.inst.cfg index 48191495900..917e90cf7f3 100644 --- a/resources/quality/voron2/voron2_v6_0.40_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_ASA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_ASA_fine.inst.cfg index 777d39748c5..1cb5221228c 100644 --- a/resources/quality/voron2/voron2_v6_0.40_ASA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_ASA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_ASA_normal.inst.cfg index 294d9c66b8a..3a18c9f8c19 100644 --- a/resources/quality/voron2/voron2_v6_0.40_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_PVA_extrafast.inst.cfg index 53497d79238..b8865a8af84 100644 --- a/resources/quality/voron2/voron2_v6_0.40_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_PVA_fast.inst.cfg index 43a0ffa1add..983addb7075 100644 --- a/resources/quality/voron2/voron2_v6_0.40_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_PVA_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_PVA_fine.inst.cfg index 8c737fbf042..80328cf24fb 100644 --- a/resources/quality/voron2/voron2_v6_0.40_PVA_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_PVA_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_PVA_normal.inst.cfg index 2d4595f38e7..a0e8fa9446b 100644 --- a/resources/quality/voron2/voron2_v6_0.40_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_TPU_extrafast.inst.cfg index 7b8ecd49579..27dccc84ed3 100644 --- a/resources/quality/voron2/voron2_v6_0.40_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_TPU_fast.inst.cfg index cc323328b34..6b6e07d2526 100644 --- a/resources/quality/voron2/voron2_v6_0.40_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_TPU_fine.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_TPU_fine.inst.cfg index fcdc58c5d03..1a9e191377c 100644 --- a/resources/quality/voron2/voron2_v6_0.40_TPU_fine.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_TPU_fine.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fine -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.40_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.40_TPU_normal.inst.cfg index 63d675bb68a..e467bdc3d33 100644 --- a/resources/quality/voron2/voron2_v6_0.40_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.40_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.40mm diff --git a/resources/quality/voron2/voron2_v6_0.50_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_ASA_extrafast.inst.cfg index e948b334dad..90e70de3195 100644 --- a/resources/quality/voron2/voron2_v6_0.50_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_ASA_fast.inst.cfg index 5b11b8a69a8..b4a86e68d86 100644 --- a/resources/quality/voron2/voron2_v6_0.50_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_ASA_normal.inst.cfg index ebb14aab785..4e97f5035e7 100644 --- a/resources/quality/voron2/voron2_v6_0.50_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_ASA_sprint.inst.cfg index 0fc5fbe8d59..465abff92e2 100644 --- a/resources/quality/voron2/voron2_v6_0.50_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_PVA_extrafast.inst.cfg index efcf6f0246d..872f7a33133 100644 --- a/resources/quality/voron2/voron2_v6_0.50_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_PVA_fast.inst.cfg index 670e236a79a..0e252d6c8d0 100644 --- a/resources/quality/voron2/voron2_v6_0.50_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_PVA_normal.inst.cfg index 878507ce990..29a9a6dcfc4 100644 --- a/resources/quality/voron2/voron2_v6_0.50_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_PVA_sprint.inst.cfg index f4f6b4dfff2..9f25c84c7cb 100644 --- a/resources/quality/voron2/voron2_v6_0.50_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_TPU_extrafast.inst.cfg index 7fa652d8551..a331f526c61 100644 --- a/resources/quality/voron2/voron2_v6_0.50_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_TPU_fast.inst.cfg index 898a271b49c..a6a095226ff 100644 --- a/resources/quality/voron2/voron2_v6_0.50_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_TPU_normal.inst.cfg index b7aaa1f7a28..a5e7c741864 100644 --- a/resources/quality/voron2/voron2_v6_0.50_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.50_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.50_TPU_sprint.inst.cfg index f05f6527836..08fee402c50 100644 --- a/resources/quality/voron2/voron2_v6_0.50_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.50_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.50mm diff --git a/resources/quality/voron2/voron2_v6_0.60_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_ASA_extrafast.inst.cfg index 4bb9372a9bc..67368a8f184 100644 --- a/resources/quality/voron2/voron2_v6_0.60_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_ASA_fast.inst.cfg index fbb74fb9ca4..d62d2bf669b 100644 --- a/resources/quality/voron2/voron2_v6_0.60_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_ASA_sprint.inst.cfg index 3e8e8195bce..573dd89ea50 100644 --- a/resources/quality/voron2/voron2_v6_0.60_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_PVA_extrafast.inst.cfg index 66b0fd971ce..ac210cfdc15 100644 --- a/resources/quality/voron2/voron2_v6_0.60_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_PVA_fast.inst.cfg index 26bdebd1b25..1a0a40ba8a6 100644 --- a/resources/quality/voron2/voron2_v6_0.60_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_PVA_sprint.inst.cfg index 4e5662790be..aab8ba5499f 100644 --- a/resources/quality/voron2/voron2_v6_0.60_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_TPU_extrafast.inst.cfg index 5e053d8bc49..7438b747db3 100644 --- a/resources/quality/voron2/voron2_v6_0.60_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_TPU_fast.inst.cfg index d2b06a4d31e..9da50270b28 100644 --- a/resources/quality/voron2/voron2_v6_0.60_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.60_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.60_TPU_sprint.inst.cfg index b6a752f140c..7dec53da68c 100644 --- a/resources/quality/voron2/voron2_v6_0.60_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.60_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.60mm diff --git a/resources/quality/voron2/voron2_v6_0.80_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_ASA_extrafast.inst.cfg index 51da4e343b7..186d2ad149e 100644 --- a/resources/quality/voron2/voron2_v6_0.80_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_ASA_sprint.inst.cfg index 77aebb66d9a..81d541a38ba 100644 --- a/resources/quality/voron2/voron2_v6_0.80_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_ASA_supersprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_ASA_supersprint.inst.cfg index 9b99c0eef3c..78628ebbc47 100644 --- a/resources/quality/voron2/voron2_v6_0.80_ASA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_ASA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_PVA_extrafast.inst.cfg index a6b11d0f459..af96ecd40d3 100644 --- a/resources/quality/voron2/voron2_v6_0.80_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_PVA_sprint.inst.cfg index 6b74da6994c..1bb40fb822b 100644 --- a/resources/quality/voron2/voron2_v6_0.80_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_PVA_supersprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_PVA_supersprint.inst.cfg index 431ecc57e97..34c27750dc5 100644 --- a/resources/quality/voron2/voron2_v6_0.80_PVA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_PVA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_TPU_extrafast.inst.cfg index 94fa58ec41e..74e38683e2b 100644 --- a/resources/quality/voron2/voron2_v6_0.80_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_TPU_sprint.inst.cfg index ed6e3bbd967..8da78abc98a 100644 --- a/resources/quality/voron2/voron2_v6_0.80_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_v6_0.80_TPU_supersprint.inst.cfg b/resources/quality/voron2/voron2_v6_0.80_TPU_supersprint.inst.cfg index 49e348299b9..3620d1c44c3 100644 --- a/resources/quality/voron2/voron2_v6_0.80_TPU_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_v6_0.80_TPU_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = V6 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_ASA_extrafast.inst.cfg index 2d1e463704f..8593ee439eb 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_ASA_fast.inst.cfg index 4a61f16bb9c..b5220d0a374 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_ASA_normal.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_ASA_normal.inst.cfg index 3906f5a5a31..7fd15f3ffb0 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_ASA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_ASA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_PVA_extrafast.inst.cfg index 6316562eec0..f1446254a20 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_PVA_fast.inst.cfg index 51f85f9d603..dd518500b3c 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_PVA_normal.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_PVA_normal.inst.cfg index def6946bf15..94def9aa8f2 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_PVA_normal.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_PVA_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_TPU_extrafast.inst.cfg index 13df7a17fef..4ba5c656f24 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_TPU_fast.inst.cfg index f7f4de0b259..ed1a9d44e85 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.40_TPU_normal.inst.cfg b/resources/quality/voron2/voron2_volcano_0.40_TPU_normal.inst.cfg index 0f7fdf0238e..c24f0543048 100644 --- a/resources/quality/voron2/voron2_volcano_0.40_TPU_normal.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.40_TPU_normal.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = normal -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.40mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_ASA_extrafast.inst.cfg index d41c1552341..62e5ac1d1e5 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_ASA_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_ASA_fast.inst.cfg index 9c69b07258e..f74b6150740 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_ASA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_ASA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_ASA_sprint.inst.cfg index 5b35eec0b71..ac5377a9fad 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_PVA_extrafast.inst.cfg index 470729ca7c1..78c4f59752c 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_PVA_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_PVA_fast.inst.cfg index e2b949208e9..97cc5bd2882 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_PVA_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_PVA_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_PVA_sprint.inst.cfg index e6309376564..98f7f15cb3c 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_TPU_extrafast.inst.cfg index a026d13755a..bbc2b959f05 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_TPU_fast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_TPU_fast.inst.cfg index 2551c5085d9..211c9317fe0 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_TPU_fast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_TPU_fast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = fast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.60_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.60_TPU_sprint.inst.cfg index 03d7a5de608..776d93e8573 100644 --- a/resources/quality/voron2/voron2_volcano_0.60_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.60_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.60mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_ASA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_ASA_extrafast.inst.cfg index bc372dae4bb..2ffba84452e 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_ASA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_ASA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_ASA_sprint.inst.cfg index 41af7ad5525..500999a45f7 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_ASA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_ASA_supersprint.inst.cfg index 990bb0d5187..9bd3bc46a3f 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_ASA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_ASA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_PVA_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_PVA_extrafast.inst.cfg index 8a739087b3d..cad3c1ae889 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_PVA_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_PVA_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_PVA_sprint.inst.cfg index 7fae42c017e..ee3accfaba8 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_PVA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_PVA_supersprint.inst.cfg index 81f7a4affdb..a326841ab09 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_PVA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_PVA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_TPU_extrafast.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_TPU_extrafast.inst.cfg index f8382a17f7d..7e9fd11c83a 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_TPU_extrafast.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_TPU_extrafast.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = extrafast -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_TPU_sprint.inst.cfg index a9c02df5d2c..29df645cce8 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_0.80_TPU_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_0.80_TPU_supersprint.inst.cfg index f3920f61e85..a064df9b4bf 100644 --- a/resources/quality/voron2/voron2_volcano_0.80_TPU_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_0.80_TPU_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 0.80mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_ASA_sprint.inst.cfg index 3be4231e8b7..daeb14d8632 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_ASA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_ASA_supersprint.inst.cfg index 7ac9945261d..214ebfcaa14 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_ASA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_ASA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_ASA_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_ASA_ultrasprint.inst.cfg index 79e3d1d86a1..e4fb8078cb0 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_ASA_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_ASA_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_PVA_sprint.inst.cfg index b48aadb0e4e..421af6a4b12 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_PVA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_PVA_supersprint.inst.cfg index cabb3d90206..7b7d35e6b78 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_PVA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_PVA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_PVA_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_PVA_ultrasprint.inst.cfg index 30d016cf2c6..455b0031c4c 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_PVA_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_PVA_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_TPU_sprint.inst.cfg index 57ddcf68f4b..5422b31737a 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_TPU_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_TPU_supersprint.inst.cfg index 5de4dff5123..c74b5ec7f9d 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_TPU_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_TPU_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.00_TPU_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.00_TPU_ultrasprint.inst.cfg index 0fdf7be51cf..b37f33ef17f 100644 --- a/resources/quality/voron2/voron2_volcano_1.00_TPU_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.00_TPU_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.00mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_ASA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_ASA_sprint.inst.cfg index 374535d12f9..1b364cc93cf 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_ASA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_ASA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_ASA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_ASA_supersprint.inst.cfg index 9790b61217f..0ccc19d7797 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_ASA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_ASA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_ASA_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_ASA_ultrasprint.inst.cfg index a395749b1d5..ec266f9e8a9 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_ASA_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_ASA_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_asa quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_PVA_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_PVA_sprint.inst.cfg index d5ca080c10d..34cfd8d7586 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_PVA_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_PVA_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_PVA_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_PVA_supersprint.inst.cfg index 212b8b9ba5f..85031171264 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_PVA_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_PVA_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_PVA_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_PVA_ultrasprint.inst.cfg index 441cbb9d4f1..800f262b7c5 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_PVA_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_PVA_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_pva quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_TPU_sprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_TPU_sprint.inst.cfg index d431a471c7e..fc11f589311 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_TPU_sprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_TPU_sprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = sprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_TPU_supersprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_TPU_supersprint.inst.cfg index e611c83dd9d..9fc17ac4d67 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_TPU_supersprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_TPU_supersprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = supersprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/voron2/voron2_volcano_1.20_TPU_ultrasprint.inst.cfg b/resources/quality/voron2/voron2_volcano_1.20_TPU_ultrasprint.inst.cfg index 041a037ed06..b8b4cb618d2 100644 --- a/resources/quality/voron2/voron2_volcano_1.20_TPU_ultrasprint.inst.cfg +++ b/resources/quality/voron2/voron2_volcano_1.20_TPU_ultrasprint.inst.cfg @@ -6,7 +6,7 @@ version = 4 [metadata] material = generic_tpu quality_type = ultrasprint -setting_version = 23 +setting_version = 24 type = quality variant = Volcano 1.20mm diff --git a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fast.inst.cfg b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fast.inst.cfg index 4360f05c8e3..768c094e4d1 100644 --- a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fast.inst.cfg +++ b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fast.inst.cfg @@ -4,7 +4,6 @@ name = Fast version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fast06 setting_version = 24 diff --git a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fine.inst.cfg b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fine.inst.cfg index 7a17e6ba92c..cf24648bc5e 100644 --- a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fine.inst.cfg +++ b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_fine.inst.cfg @@ -4,7 +4,6 @@ name = Fine version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fine06 setting_version = 24 diff --git a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_normal.inst.cfg b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_normal.inst.cfg index 83d4dab8c53..988e3ac7b88 100644 --- a/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_normal.inst.cfg +++ b/resources/quality/zyyx_pro/carbon06/flex/zyyx_pro_06_flex_normal.inst.cfg @@ -4,7 +4,6 @@ name = Normal version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = normal06 setting_version = 24 diff --git a/resources/quality/zyyx_pro/carbon12/flex/zyyx_pro_12_flex_normal.inst.cfg b/resources/quality/zyyx_pro/carbon12/flex/zyyx_pro_12_flex_normal.inst.cfg index baf56e216e6..d71c247e8c5 100644 --- a/resources/quality/zyyx_pro/carbon12/flex/zyyx_pro_12_flex_normal.inst.cfg +++ b/resources/quality/zyyx_pro/carbon12/flex/zyyx_pro_12_flex_normal.inst.cfg @@ -4,7 +4,6 @@ name = Normal version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = normal12 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fast.inst.cfg b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fast.inst.cfg index 1b6e95f546a..684035be6ec 100644 --- a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fast.inst.cfg +++ b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fast.inst.cfg @@ -4,7 +4,6 @@ name = Fast version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fast02 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fine.inst.cfg b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fine.inst.cfg index 1d1713a08eb..093f725d011 100644 --- a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fine.inst.cfg +++ b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_fine.inst.cfg @@ -4,7 +4,6 @@ name = Fine version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fine02 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_normal.inst.cfg b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_normal.inst.cfg index 797637a25d0..5bbe4bd9f08 100644 --- a/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_normal.inst.cfg +++ b/resources/quality/zyyx_pro/multi02/flex/zyyx_pro_02_flex_normal.inst.cfg @@ -4,7 +4,6 @@ name = Normal version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = normal02 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fast.inst.cfg b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fast.inst.cfg index e49678a86cc..730dbd6d112 100644 --- a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fast.inst.cfg +++ b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fast.inst.cfg @@ -4,7 +4,6 @@ name = Fast version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fast04 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fine.inst.cfg b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fine.inst.cfg index 09dd668f783..6b4a1b0628d 100644 --- a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fine.inst.cfg +++ b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_fine.inst.cfg @@ -4,7 +4,6 @@ name = Fine version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fine04 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_normal.inst.cfg b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_normal.inst.cfg index 9aa604ca2b7..800c57b89a0 100644 --- a/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_normal.inst.cfg +++ b/resources/quality/zyyx_pro/multi04/flex/zyyx_pro_04_flex_normal.inst.cfg @@ -4,7 +4,6 @@ name = Normal version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = normal04 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fast.inst.cfg b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fast.inst.cfg index 908f0691408..0b1d0dc5e97 100644 --- a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fast.inst.cfg +++ b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fast.inst.cfg @@ -4,7 +4,6 @@ name = Fast version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fast08 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fine.inst.cfg b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fine.inst.cfg index f6456e0768d..a15da586889 100644 --- a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fine.inst.cfg +++ b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_fine.inst.cfg @@ -4,7 +4,6 @@ name = Fine version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = fine08 setting_version = 24 diff --git a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_normal.inst.cfg b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_normal.inst.cfg index d5eddb7e796..02f63b70000 100644 --- a/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_normal.inst.cfg +++ b/resources/quality/zyyx_pro/multi08/flex/zyyx_pro_08_flex_normal.inst.cfg @@ -4,7 +4,6 @@ name = Normal version = 4 [metadata] -global_quality = True material = generic_tpu_175 quality_type = normal08 setting_version = 24 diff --git a/resources/setting_visibility/advanced.cfg b/resources/setting_visibility/advanced.cfg index 93c3dc91efd..8585a05eeca 100644 --- a/resources/setting_visibility/advanced.cfg +++ b/resources/setting_visibility/advanced.cfg @@ -133,6 +133,7 @@ prime_tower_mode prime_tower_position_x prime_tower_position_y prime_tower_brim_enable +interlocking_enable [meshfix] @@ -144,7 +145,6 @@ magic_spiralize smooth_spiralized_contours [experimental] -interlocking_enable conical_overhang_enabled support_conical_enabled adaptive_layer_height_enabled diff --git a/resources/setting_visibility/basic.cfg b/resources/setting_visibility/basic.cfg index 0193eb26ba7..6c6124ab673 100644 --- a/resources/setting_visibility/basic.cfg +++ b/resources/setting_visibility/basic.cfg @@ -56,6 +56,7 @@ adhesion_extruder_nr prime_tower_enable prime_tower_position_x prime_tower_position_y +interlocking_enable [meshfix] diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index b13618e5c16..c8935896b6a 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -248,6 +248,7 @@ cool_fan_speed_0 cool_fan_full_at_height cool_fan_full_layer cool_min_layer_time +cool_min_layer_time_overhang cool_min_speed cool_lift_head cool_during_extruder_switch @@ -378,6 +379,12 @@ prime_tower_min_shell_thickness ooze_shield_enabled ooze_shield_angle ooze_shield_dist +interlocking_enable +interlocking_beam_width +interlocking_orientation +interlocking_beam_layer_count +interlocking_dept +interlocking_boundary_avoidance [meshfix] meshfix_union_all @@ -428,12 +435,6 @@ roofing_monotonic roofing_angles infill_enable_travel_optimization material_flow_temp_graph -interlocking_enable -interlocking_beam_width -interlocking_orientation -interlocking_beam_layer_count -interlocking_dept -interlocking_boundary_avoidance support_skip_some_zags support_skip_zag_per_mm support_zag_skip_count diff --git a/resources/themes/cura-light/theme.json b/resources/themes/cura-light/theme.json index a2e2efae870..65434d5823a 100644 --- a/resources/themes/cura-light/theme.json +++ b/resources/themes/cura-light/theme.json @@ -568,7 +568,7 @@ "section_icon_column": [2.5, 2.5], "setting": [25.0, 1.8], - "setting_control": [11.0, 2.0], + "setting_control": [9.0, 2.0], "setting_control_radius": [0.15, 0.15], "setting_control_depth_margin": [1.4, 0.0], "setting_unit_margin": [0.5, 0.5], diff --git a/resources/variants/ultimaker_s8_aa_plus04.inst.cfg b/resources/variants/ultimaker_s8_aa_plus04.inst.cfg new file mode 100644 index 00000000000..59e1f8963d4 --- /dev/null +++ b/resources/variants/ultimaker_s8_aa_plus04.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = AA+ 0.4 +version = 4 + +[metadata] +hardware_type = nozzle +setting_version = 24 +type = variant + +[values] +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_id = AA+ 0.4 +machine_nozzle_size = 0.4 +machine_nozzle_tip_outer_diameter = 1.2 +retraction_prime_speed = =retraction_speed + diff --git a/resources/variants/ultimaker_s8_bb04.inst.cfg b/resources/variants/ultimaker_s8_bb04.inst.cfg new file mode 100644 index 00000000000..ba5ca090b67 --- /dev/null +++ b/resources/variants/ultimaker_s8_bb04.inst.cfg @@ -0,0 +1,19 @@ +[general] +definition = ultimaker_s8 +name = BB 0.4 +version = 4 + +[metadata] +hardware_type = nozzle +setting_version = 24 +type = variant + +[values] +machine_nozzle_heat_up_speed = 1.5 +machine_nozzle_id = BB 0.4 +machine_nozzle_tip_outer_diameter = 1.0 +retraction_amount = 4.5 +support_bottom_height = =layer_height * 2 +support_interface_enable = True +switch_extruder_retraction_amount = 12 + diff --git a/resources/variants/ultimaker_s8_cc_plus04.inst.cfg b/resources/variants/ultimaker_s8_cc_plus04.inst.cfg new file mode 100644 index 00000000000..caefbaf3701 --- /dev/null +++ b/resources/variants/ultimaker_s8_cc_plus04.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = CC+ 0.4 +version = 4 + +[metadata] +hardware_type = nozzle +setting_version = 24 +type = variant + +[values] +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_id = CC+ 0.4 +machine_nozzle_size = 0.4 +machine_nozzle_tip_outer_diameter = 1.2 +retraction_prime_speed = =retraction_speed + diff --git a/resources/variants/ultimaker_s8_dd04.inst.cfg b/resources/variants/ultimaker_s8_dd04.inst.cfg new file mode 100644 index 00000000000..e71b18b81d3 --- /dev/null +++ b/resources/variants/ultimaker_s8_dd04.inst.cfg @@ -0,0 +1,17 @@ +[general] +definition = ultimaker_s8 +name = DD 0.4 +version = 4 + +[metadata] +hardware_type = nozzle +setting_version = 24 +type = variant + +[values] +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_id = DD 0.4 +machine_nozzle_size = 0.4 +machine_nozzle_tip_outer_diameter = 1.2 +retraction_prime_speed = =retraction_speed + diff --git a/scripts/extract_changelog.py b/scripts/extract_changelog.py index a1a0b251f0b..934b963e0a9 100644 --- a/scripts/extract_changelog.py +++ b/scripts/extract_changelog.py @@ -13,7 +13,7 @@ args.version = args.version[:-2] start_token = f"[{args.version}]" - pattern_stop_log = "\[\d+(\.\d+){1,2}\]" + pattern_stop_log = r"\[\d+(\.\d+){1,2}\]" log_line = False first_chapter = True