EBeam_ChrisPrindle.gds #97
Conversation
|
Thank you for uploading your design! If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
|
I see some verification errors regarding the labels: unique label errors + labels too far from the GC |
EBeam_ChrisPrindle.gds
|
Thank you for uploading your design! If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V). Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit. You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline. |
Thank you for your comments. I fixed the verification errors in KLayout (extra label above each MZI that I didn't notice before), and I resubmitted my layout GDS file. No errors now. All checks have passed. Do I need to take any more actions to ensure my design is included in the tapeout? Best regards, Chris Prindle |
EBeam_ChrisPrindle.gds