Please replace the old files with the new ones

[JohnGerguis]

Would you please merge the following files:
EBeam_JohnGerguis_A
EBeam_JohnGerguis_B
EBeam_JohnGerguis_C

and please remove the old files named:
openEBL_JohnGerguis_A
openEBL_JohnGerguis_B
openEBL_JohnGerguis_C

Thanks so much!

[github-actions]

Thank you for uploading your design!

If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V).

Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit.

You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline.

[omidesml]

you can delete them from your fork and pull request. And by our approval they get deleted.

[github-actions]

Thank you for uploading your design!

If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V).

Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit.

You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline.

[github-actions]

Thank you for uploading your design!

If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V).

Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit.

You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline.

[github-actions]

Thank you for uploading your design!

If you have not already checked it, please run the SiEPIC Functional Verification in KLayout, using the menu SiEPIC-Verification-Functional Layout Check (V).

Please note that we have added a new rule (on May 2, 2024) to SiEPIC-Tools and the EBeam PDK: The grating coupler spacing (pitch) must be at least 60.0 microns. This is to help avoid the probe station from accidentally aligning to an adjacent circuit.

You may continue making updates to your design, or even contributing additonal designs (using a separate file name), until the tape-out deadline.

[JohnGerguis]

I have removed the old files from the Can you please merge the following files:
EBeam_JohnGerguis_A
EBeam_JohnGerguis_B
EBeam_JohnGerguis_C

and please remove the old files named:
openEBL_JohnGerguis_A
openEBL_JohnGerguis_B
openEBL_JohnGerguis_C

Thanks so much!