A handwired keyboard based on a Pro micro Atmega32u4 controller
- Keyboard Maintainer: Paul Enrico N. Viola (https://github.com/PollyV1)
- Hardware Supported: Pro micro Atmega32u4 controller
- Hardware Availability: https://github.com/PollyV1/Polly40/
- QMK link: https://github.com/qmk/qmk_firmware/tree/master/keyboards/handwired/polly40
Build Details:
- ATMEGA23U4 Controller(Pro Micro): https://shopee.ph/Pro-Micro-ATmega32U4-5V-16MHz-USB-Arduino-Compatible-i.20469516.225455828
- 1N4148 diodes: https://shopee.ph/100PCS-do-35-1N4148-IN4148-High-speed-switching-diodes-i.307295456.4459281480
- AWG30 Wires: https://shopee.ph/8-Color-Wrapping-Wire-250-Meters-AWG30-Cable-OK-Wire-Jumper-Wire-PVC-Electronic-Conductor-Wire-Connector-for-PCB-i.487295469.13507749266
- 0.6 soldering lead: https://shopee.ph/0.6-0.8-1-1.2-1.5MM-63-37-FLUX-2.0-45FT-Tin-Lead-Tin-Wire-Melt-Rosin-Core-Solder-Soldering-Wire-Roll-For-diy-i.307295456.6552339735
- Soldering Iron: 60watts adjustable temp
- M2.5x8mm case screws: https://shopee.ph/NINDEJIN-Hex-Socket-Countersunk-Screw-5-50Pcs-M2-M2.5-M3-M4-304-Stainless-Steel-Hexagon-Socket-Flat-Head-Bolt-Allen-Bolts-Din7991-i.288855530.5951719358
- Type C daughter board: https://shopee.ph/USB-Breakout-Connector-MINI-MICRO-USB-to-DIP-Adapter-Female-Connector-2.54-B-Type-A-B-C-USB-i.20469516.1533813159?sp_atk=96eb41b0-1f5b-484a-9c44-1e8134838dca
- 3d printed Case and plate: https://www.thingiverse.com/thing:5866768
- 3d printed Case and Plate R2: https://www.thingiverse.com/thing:5908290
- Switches: Lubed Akko matcha green: https://shopee.ph/AKKO-CS-Switch-Rose-Red-Matcha-Green-Ocean-Blue-Radiant-Red-Lavender-Purple-Vintage-White-i.120871528.10752748800
- Stabilizer: Lubed and tuned durock plate mount stabs
- Keycaps: Milk purple XDA keycaps
Make example for this keyboard (after setting up your build environment):
make polly/default:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.