Add support for lirc_odroid blaster, SPI flash and petitboot #1

mad-ady · 2019-01-11T13:15:04Z

No description provided.

1. fix disconnection during suspend/resume 2. fix unable to wake during suspend Change-Id: I3e1d535e7cee536a253446dc482d85f54a612323 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

Change-Id: I5b5a30393157192fd8c1c033169931e7d5b03df0 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

If cpu frequency was 1.0 GHz, bluetooth music is unstable. But it is stable when cpu frequency is 400 MHz. Although I had test the uart dma driver many days on rk3088, maybe the cpu frequency was low, and I couldn't produce the issue. In one word, the code is unlogical. The new logic is that increase the fifo water level, if dmac bursts before it, wait until dmac finishes and read the rest data. If dmac doesn't burst after it, then read data from fifo directly. Change-Id: I6fec42a0895df8a0faeba97d05fd36b761744fa2 Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>

Change-Id: I69fe6f0c0857ade25e777be388fcab6261f1a533 Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>

Change-Id: Ie4d437d9a2e4ec965952707561c0950889dbbc01 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

Change-Id: I12397bb36ad7cdcf506b8d685a5131c5d2358318 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

1. disable tuning during sdio sleep 2. add get_oob_irq_flags interface for request_irq(flags) Change-Id: Ic77fd82fc3f93a813512ecceaed2c75fe204b750 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

As the external/rkwifibt will callback the wifi module to instead of build-in for linux. Change-Id: Id6daabc21c06fb48e6fc1a74cc3d6ad1db6898f1 Signed-off-by: Caesar Wang <wxt@rock-chips.com>

There is a hardware mistake on firefly board, it will cause the vdd_log is too low based on previous parameter, so we change the pwm parameter to make sure the vdd_log is about 0.9v. Change-Id: I2d63cfe201c02a1351eebae21d1c7d449385087e Signed-off-by: Wenping Zhang <wenping.zhang@rock-chips.com>

The procedure of rpm_idle() is as follows. rpm_idle ->rpm_suspend ->pm_genpd_runtime_suspend ->pm_clk_suspend ->clk_disable ->genpd_poweroff Pm_runtime_put(dev) causes rpm_idle() to be queued up, when pm_clk_suspend() is executed, the rockchip dmcfreq lock is released, vop clocks may be closed while changing ddr frequency. Use pm_runtime_put_sync() instead of pm_runtime_put(), so that rpm_idle can be executed before the lock is released. Change-Id: Ibf4ff70b65782427eaf0fe9f7566ebff602d3757 Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>

From the schematic RK_SAPPHIRE_SOCBOARD_RK3399_LPDDR3D178P232SD8_V12, the vcc33_3v0 supply power for vddio, and rk808's i2c used the 3.0v power. Change-Id: Ib7546a100f6b6cf5406f4bd24a27db79bcdf4fc3 Signed-off-by: Caesar Wang <wxt@rock-chips.com>

Change-Id: Iae23985499357d9e544bd94ed779ca4742e49c42 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

the correct fps of full size mode is 7.5fps, is not 7fps. Change-Id: I059fa403ea4a4f1e99c38ddea077e06925840505 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

Change-Id: I23f563c1de9527f2a17ccbe90a61516b4f76b2a8 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

Change-Id: I5335a4929167736359f97acb7ff9b651260dd05e Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

1.Change the format to MEDIA_BUS_FMT_UYVY8_2X8. 2.Add the PIXEL_RATE for control handlers. Change-Id: I4f40e3d90765c12702210f88ad60f2147d328456 Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

Change-Id: Iabd99b8b007a49ae5fd2babf99497706c276e32e Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

…r board Change-Id: Ie4d8d2401bd7b717703f539da7073f30904e1926 Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

Change-Id: I364b1a6fffdd4e2ac2461a16f872d22190c2c163 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

Change-Id: I273af9c7bfd205e5bf4406c105fb568c0928d274 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

Change-Id: I652237cf447ce16c7a8f14a8f2608f1c16f62480 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

Change-Id: I173a2054d3f3878d0cc8b4f12236a5ce3f050834 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

Change-Id: Ice351569214c2681a36ec0791ab551cf8d0d8076 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

Change-Id: I0d42b822e0cf89a416b04eb18c1c3dc814fb5ac3 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

Change-Id: Id0ed268231deeb1bc623532c6ca5f989942a6145 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

Change-Id: I66df7628ad921e5eddacdcd03eeb105c66a8dd41 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

Change-Id: I43ec817507e791d2194c4b65b18cdf90bd4db09a Signed-off-by: Tao Huang <huangtao@rock-chips.com>

Change-Id: Id49ba18a182add9cd1b2e53539b6fff0255c8cd8 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

Change-Id: I71a79cf4372d2645537e3b8d19253487eb9039a2 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

The bit7 of I2C_IPD register also needs to be clean, otherwise, it will always exist. Change-Id: Iee01bffd83909e84ed99c9fab821e621c970efd3 Signed-off-by: David Wu <david.wu@rock-chips.com>

'channels.max_combined' initialized only on ioctl success and errno is only valid on ioctl failure. The code doesn't produce any runtime issues, but makes memory sanitizers angry: Conditional jump or move depends on uninitialised value(s) at 0x55C056F: xsk_get_max_queues (xsk.c:336) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) Additionally fixed warning on uninitialized bytes in ioctl arguments: Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s) at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so) by 0x55C0546: xsk_get_max_queues (xsk.c:330) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Address 0x1ffefff378 is on thread 1's stack in frame #1, created by xsk_get_max_queues (xsk.c:318) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) CC: Magnus Karlsson <magnus.karlsson@intel.com> Fixes: 1cad078 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>

SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27 ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 2179626 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>

rdma_counter_init() may fail for a device. In such case while calculating total sum, ignore NULL hstats. This fixes below observed call trace. BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ hardkernel#13 RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core] Call Trace: show_hw_stats+0x5e/0x130 [ib_core] dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xc6/0x1a0 seq_read+0x132/0x370 vfs_read+0x89/0x140 ksys_read+0x5c/0xd0 do_syscall_64+0x5a/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: f34a55e ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

If we hit an error while allocating the page tables, we have to unwind the incomplete updates, and wish to free the unused pd. However, we are not allowed to be hoding the spinlock at that point, and so must use the later free to defer it until after we drop the lock. <3> [414.363795] BUG: sleeping function called from invalid context at drivers/gpu/drm/i915/i915_gem_gtt.c:472 <3> [414.364167] in_atomic(): 1, irqs_disabled(): 0, pid: 3905, name: i915_selftest <4> [414.364406] 3 locks held by i915_selftest/3905: <4> [414.364408] #0: 0000000034fe8aa8 (&dev->mutex){....}, at: device_driver_attach+0x18/0x50 <4> [414.364415] #1: 000000006bd8a560 (&dev->struct_mutex){+.+.}, at: igt_ctx_exec+0xb7/0x410 [i915] <4> [414.364476] #2: 000000003dfdc766 (&(&pd->lock)->rlock){+.+.}, at: gen8_ppgtt_alloc_pdp+0x448/0x540 [i915] <3> [414.364529] Preemption disabled at: <4> [414.364530] [<0000000000000000>] 0x0 <4> [414.364696] CPU: 0 PID: 3905 Comm: i915_selftest Tainted: G U 5.2.0-rc7-CI-CI_DRM_6403+ #1 <4> [414.364698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4> [414.364699] Call Trace: <4> [414.364704] dump_stack+0x67/0x9b <4> [414.364708] ___might_sleep+0x167/0x250 <4> [414.364777] vm_free_page+0x24/0xc0 [i915] <4> [414.364852] free_pd+0xf/0x20 [i915] <4> [414.364897] gen8_ppgtt_alloc_pdp+0x489/0x540 [i915] <4> [414.364946] gen8_ppgtt_alloc_4lvl+0x8e/0x2e0 [i915] <4> [414.364992] ppgtt_bind_vma+0x2e/0x60 [i915] <4> [414.365039] i915_vma_bind+0xe8/0x2c0 [i915] <4> [414.365088] __i915_vma_do_pin+0xa1/0xd20 [i915] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050 Fixes: 1d1b549 ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk (cherry picked from commit 0686108) Signed-off-by: Jani Nikula <jani.nikula@intel.com>

On unwinding the allocation error path and having freed the page table entry, it is imperative that we mark it as scratch. <4> [416.075569] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [416.075801] CPU: 0 PID: 2385 Comm: kworker/u2:11 Tainted: G U 5.2.0-rc7-CI-Patchwork_13534+ #1 <4> [416.076162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4> [416.076522] Workqueue: i915 __i915_vm_release [i915] <4> [416.076754] RIP: 0010:gen8_ppgtt_cleanup_3lvl+0x58/0xb0 [i915] <4> [416.077023] Code: 81 e2 04 fe ff ff 81 c2 ff 01 00 00 4c 8d 74 d6 58 4d 8b 65 00 4d 3b a7 28 02 00 00 74 40 49 8d 5c 24 50 49 81 c4 50 10 00 00 <48> 8b 2b 49 3b af 20 02 00 00 74 13 4c 89 ff 48 89 ee e8 01 fb ff <4> [416.077445] RSP: 0018:ffffc9000046bd98 EFLAGS: 00010206 <4> [416.077625] RAX: 0001000000000000 RBX: 6b6b6b6b6b6b6bbb RCX: 8b4b56d500000000 <4> [416.077838] RDX: 00000000000001ff RSI: ffff88805a578008 RDI: ffff88805bd0efc8 <4> [416.078167] RBP: ffff88805bd0efc8 R08: 0000000004e42b93 R09: 0000000000000001 <4> [416.078381] R10: 0000000000000000 R11: ffff888077a1b0b8 R12: 6b6b6b6b6b6b7bbb <4> [416.078594] R13: ffff88805a578058 R14: ffff88805a579058 R15: ffff88805bd0efc8 <4> [416.078815] FS: 0000000000000000(0000) GS:ffff88807da00000(0000) knlGS:0000000000000000 <4> [416.079395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [416.079851] CR2: 000056160fec2b14 CR3: 0000000071bbc003 CR4: 00000000003606f0 <4> [416.080388] Call Trace: <4> [416.080828] gen8_ppgtt_cleanup+0x64/0x100 [i915] <4> [416.081399] __i915_vm_release+0xfc/0x1d0 [i915] Fixes: 1d1b549 ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190704201656.15775-1-chris@chris-wilson.co.uk (cherry picked from commit e7539b7) Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Commit aca5139 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ hardkernel#18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca5139 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 hardkernel#4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [<bf8000e2>] lr : [<bf8000bd>] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c) [<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150) [<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104) [<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104) [<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94) [<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62) Since commit 96232cb ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Fixes: 96232cb ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1 for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com> Fixes: 801ebf1 ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>

Our test suite somtimes provokes the following crash: Description of problem: [ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 1092.605072] PGD 0 P4D 0 [ 1092.607620] Oops: 0000 [#1] SMP PTI [ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1 [ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018 [ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc] [ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7 [ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282 [ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045 [ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000 [ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a [ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000 [ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a [ 1092.692614] FS: 0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000 [ 1092.700702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0 [ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1092.727843] PKRU: 55555554 [ 1092.730556] Call Trace: [ 1092.733010] <IRQ> [ 1092.735034] tipc_sk_filter_rcv+0x7ca/0xb80 [tipc] [ 1092.739828] ? __kmalloc_node_track_caller+0x1cb/0x290 [ 1092.744974] ? dev_hard_start_xmit+0xa5/0x210 [ 1092.749332] tipc_sk_rcv+0x389/0x640 [tipc] [ 1092.753519] tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc] [ 1092.758224] tipc_rcv+0x57a/0xf20 [tipc] [ 1092.762154] ? ktime_get_real_ts64+0x40/0xe0 [ 1092.766432] ? tpacket_rcv+0x50/0x9f0 [ 1092.770098] tipc_l2_rcv_msg+0x4a/0x70 [tipc] [ 1092.774452] __netif_receive_skb_core+0xb62/0xbd0 [ 1092.779164] ? enqueue_entity+0xf6/0x630 [ 1092.783084] ? kmem_cache_alloc+0x158/0x1c0 [ 1092.787272] ? __build_skb+0x25/0xd0 [ 1092.790849] netif_receive_skb_internal+0x42/0xf0 [ 1092.795557] napi_gro_receive+0xba/0xe0 [ 1092.799417] mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core] [ 1092.804564] mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core] [ 1092.809536] mlx5e_napi_poll+0xb2/0xce0 [mlx5_core] [ 1092.814415] ? __wake_up_common_lock+0x89/0xc0 [ 1092.818861] net_rx_action+0x149/0x3b0 [ 1092.822616] __do_softirq+0xe3/0x30a [ 1092.826193] irq_exit+0x100/0x110 [ 1092.829512] do_IRQ+0x85/0xd0 [ 1092.832483] common_interrupt+0xf/0xf [ 1092.836147] </IRQ> [ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0 [ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f [ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f [ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000 [ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940 [ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78 [ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000 [ 1092.905196] ? cpuidle_enter_state+0x92/0x2a0 [ 1092.909555] do_idle+0x236/0x280 [ 1092.912785] cpu_startup_entry+0x6f/0x80 [ 1092.916715] start_secondary+0x1a7/0x200 [ 1092.920642] secondary_startup_64+0xb7/0xc0 [...] The reason is that the skb list tipc_socket::mc_method.deferredq only is initialized for connectionless sockets, while nothing stops arriving multicast messages from being filtered by connection oriented sockets, with subsequent access to the said list. We fix this by initializing the list unconditionally at socket creation. This eliminates the crash, while the message still is dropped further down in tipc_sk_filter_rcv() as it should be. Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Commit abbbdf1 ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ hardkernel#4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 from Jiri fixes the error path of the module initialization function. Found during manual code inspection. Patch #2 from Petr further reduces the default shared buffer pool sizes in order to work around a problem that was originally described in commit e891ce1 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

To properly clear the slab on free with slab_want_init_on_free, we walk the list of free objects using get_freepointer/set_freepointer. The value we get from get_freepointer may not be valid. This isn't an issue since an actual value will get written later but this means there's a chance of triggering a bug if we use this value with set_freepointer: kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] PREEMPT PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a hardkernel#4 RIP: 0010:kfree+0x58a/0x5c0 Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4 RSP: 0000:ffffffff82603d90 EFLAGS: 00010002 RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000 RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320 RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100 R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300 FS: 0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0 Call Trace: apply_wqattrs_prepare+0x154/0x280 apply_workqueue_attrs_locked+0x4e/0xe0 apply_workqueue_attrs+0x36/0x60 alloc_workqueue+0x25a/0x6d0 workqueue_init_early+0x246/0x348 start_kernel+0x3c7/0x7ec x86_64_start_reservations+0x40/0x49 x86_64_start_kernel+0xda/0xe4 secondary_startup_64+0xb6/0xc0 Modules linked in: ---[ end trace f67eb9af4d8d492b ]--- Fix this by ensuring the value we set with set_freepointer is either NULL or another value in the chain. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Fixes: 6471384 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc7 (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Rob Clark <robdclark@chromium.org> [seanpaul changed subject to something more desriptive] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com

When start_queue fails, we need to make sure to drain the queue cq before freeing the rdma resources because we might still race with the completion path. Have start_queue() error path safely stop the queue. -- [30371.808111] nvme nvme1: Failed reconnect attempt 11 [30371.808113] nvme nvme1: Reconnecting in 10 seconds... [...] [30382.069315] nvme nvme1: creating 4 I/O queues. [30382.257058] nvme nvme1: Connect Invalid SQE Parameter, qid 4 [30382.257061] nvme nvme1: failed to connect queue: 4 ret=386 [30382.305001] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [30382.305022] IP: qedr_poll_cq+0x8a3/0x1170 [qedr] [30382.305028] PGD 0 P4D 0 [30382.305037] Oops: 0000 [#1] SMP PTI [...] [30382.305153] Call Trace: [30382.305166] ? __switch_to_asm+0x34/0x70 [30382.305187] __ib_process_cq+0x56/0xd0 [ib_core] [30382.305201] ib_poll_handler+0x26/0x70 [ib_core] [30382.305213] irq_poll_softirq+0x88/0x110 [30382.305223] ? sort_range+0x20/0x20 [30382.305232] __do_softirq+0xde/0x2c6 [30382.305241] ? sort_range+0x20/0x20 [30382.305249] run_ksoftirqd+0x1c/0x60 [30382.305258] smpboot_thread_fn+0xef/0x160 [30382.305265] kthread+0x113/0x130 [30382.305273] ? kthread_create_worker_on_cpu+0x50/0x50 [30382.305281] ret_from_fork+0x35/0x40 -- Reported-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>

lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1 ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>

We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>

The below kernel panic was observed when created bond mode LACP with GRE tunnel on top. The reason to it was not released spinlock during mlx5 notify unregsiter sequence. [ 234.562007] BUG: scheduling while atomic: sh/10900/0x00000002 [ 234.563005] Preemption disabled at: [ 234.566864] ------------[ cut here ]------------ [ 234.567120] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 234.567139] WARNING: CPU: 16 PID: 10900 at kernel/sched/core.c:3203 preempt_count_sub+0xca/0x170 [ 234.569550] CPU: 16 PID: 10900 Comm: sh Tainted: G W 5.2.0-rc1-for-linust-dbg-2019-05-25_04-57-33-60 #1 [ 234.569886] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.6.1 02/12/2018 [ 234.570183] RIP: 0010:preempt_count_sub+0xca/0x170 [ 234.570404] Code: 03 38 d0 7c 08 84 d2 0f 85 b0 00 00 00 8b 15 dd 02 03 04 85 d2 75 ba 48 c7 c6 00 e1 88 83 48 c7 c7 40 e1 88 83 e8 76 11 f7 ff <0f> 0b 5b c3 65 8b 05 d3 1f d8 7e 84 c0 75 82 e8 62 c3 c3 00 85 c0 [ 234.570911] RSP: 0018:ffff888b94477b08 EFLAGS: 00010286 [ 234.571133] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 234.571391] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000246 [ 234.571648] RBP: ffff888ba5560000 R08: fffffbfff08962d5 R09: fffffbfff08962d5 [ 234.571902] R10: 0000000000000001 R11: fffffbfff08962d4 R12: ffff888bac6e9548 [ 234.572157] R13: ffff888babfaf728 R14: ffff888bac6e9568 R15: ffff888babfaf750 [ 234.572412] FS: 00007fcafa59b740(0000) GS:ffff888bed200000(0000) knlGS:0000000000000000 [ 234.572686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 234.572914] CR2: 00007f984f16b140 CR3: 0000000b2bf0a001 CR4: 00000000001606e0 [ 234.573172] Call Trace: [ 234.573336] _raw_spin_unlock+0x2e/0x50 [ 234.573542] mlx5_ib_unbind_slave_port+0x1bc/0x690 [mlx5_ib] [ 234.573793] mlx5_ib_cleanup_multiport_master+0x1d3/0x660 [mlx5_ib] [ 234.574039] mlx5_ib_stage_init_cleanup+0x4c/0x360 [mlx5_ib] [ 234.574271] ? kfree+0xf5/0x2f0 [ 234.574465] __mlx5_ib_remove+0x61/0xd0 [mlx5_ib] [ 234.574688] ? __mlx5_ib_remove+0xd0/0xd0 [mlx5_ib] [ 234.574951] mlx5_remove_device+0x234/0x300 [mlx5_core] [ 234.575224] mlx5_unregister_device+0x4d/0x1e0 [mlx5_core] [ 234.575493] remove_one+0x4f/0x160 [mlx5_core] [ 234.575704] pci_device_remove+0xef/0x2a0 [ 234.581407] ? pcibios_free_irq+0x10/0x10 [ 234.587143] ? up_read+0xc1/0x260 [ 234.592785] device_release_driver_internal+0x1ab/0x430 [ 234.598442] unbind_store+0x152/0x200 [ 234.604064] ? sysfs_kf_write+0x3b/0x180 [ 234.609441] ? sysfs_file_ops+0x160/0x160 [ 234.615021] kernfs_fop_write+0x277/0x440 [ 234.620288] ? __sb_start_write+0x1ef/0x2c0 [ 234.625512] vfs_write+0x15e/0x460 [ 234.630786] ksys_write+0x156/0x1e0 [ 234.635988] ? __ia32_sys_read+0xb0/0xb0 [ 234.641120] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 234.646163] do_syscall_64+0x95/0x470 [ 234.651106] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 234.656004] RIP: 0033:0x7fcaf9c9cfd0 [ 234.660686] Code: 73 01 c3 48 8b 0d c0 6e 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d cd cf 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee cb 01 00 48 89 04 24 [ 234.670128] RSP: 002b:00007ffd3b01ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 234.674811] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fcaf9c9cfd0 [ 234.679387] RDX: 000000000000000d RSI: 00007fcafa5c1000 RDI: 0000000000000001 [ 234.683848] RBP: 00007fcafa5c1000 R08: 000000000000000a R09: 00007fcafa59b740 [ 234.688167] R10: 00007ffd3b01d8e0 R11: 0000000000000246 R12: 00007fcaf9f75400 [ 234.692386] R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000000 [ 234.696495] irq event stamp: 153067 [ 234.700525] hardirqs last enabled at (153067): [<ffffffff83258c39>] _raw_spin_unlock_irqrestore+0x59/0x70 [ 234.704665] hardirqs last disabled at (153066): [<ffffffff83259382>] _raw_spin_lock_irqsave+0x22/0x90 [ 234.708722] softirqs last enabled at (153058): [<ffffffff836006c5>] __do_softirq+0x6c5/0xb4e [ 234.712673] softirqs last disabled at (153051): [<ffffffff81227c1d>] irq_exit+0x17d/0x1d0 [ 234.716601] ---[ end trace 5dbf096843ee9ce6 ]--- Fixes: df097a2 ("IB/mlx5: Use the new mlx5 core notifier API") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731083852.584-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>

mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d629 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Matteo Croce <mcroce@redhat.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>

TCPM may receive PD messages associated with unknown or unsupported alternate modes. If that happens, calls to typec_match_altmode() will return NULL. The tcpm code does not currently take this into account. This results in crashes. Unable to handle kernel NULL pointer dereference at virtual address 000001f0 pgd = 41dad9a1 [000001f0] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 hardkernel#6 Hardware name: Atmel SAMA5 Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm] PC is at typec_altmode_attention+0x0/0x14 LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm] ... [<c03fbee8>] (typec_altmode_attention) from [<bf8030fb>] (tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]) [<bf8030fb>] (tcpm_pd_rx_handler [tcpm]) from [<c012082b>] (process_one_work+0x123/0x2a8) [<c012082b>] (process_one_work) from [<c0120a6d>] (worker_thread+0xbd/0x3b0) [<c0120a6d>] (worker_thread) from [<c012431f>] (kthread+0xcf/0xf4) [<c012431f>] (kthread) from [<c01010f9>] (ret_from_fork+0x11/0x38) Ignore PD messages if the associated alternate mode is not supported. Fixes: e9576fe ("usb: typec: tcpm: Support for Alternate Modes") Cc: stable <stable@vger.kernel.org> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>

In the 5.3 merge window, commit 7c7e301 ("btrfs: sysfs: Replace default_attrs in ktypes with groups"), we started using the member "defaults_groups" for the kobject type "btrfs_raid_ktype". That leads to a series of warnings when running some test cases of fstests, such as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those warnings are like the following: [116648.059212] kernfs: can not remove 'total_bytes', no directory [116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80 (...) [116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1 (...) [116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80 (...) [116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282 [116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000 [116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8 [116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001 [116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120 [116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100 [116648.077143] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000 [116648.077852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0 [116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [116648.080585] Call Trace: [116648.081262] remove_files+0x31/0x70 [116648.081929] sysfs_remove_group+0x38/0x80 [116648.082596] sysfs_remove_groups+0x34/0x70 [116648.083258] kobject_del+0x20/0x60 [116648.083933] btrfs_free_block_groups+0x405/0x430 [btrfs] [116648.084608] close_ctree+0x19a/0x380 [btrfs] [116648.085278] generic_shutdown_super+0x6c/0x110 [116648.085951] kill_anon_super+0xe/0x30 [116648.086621] btrfs_kill_super+0x12/0xa0 [btrfs] [116648.087289] deactivate_locked_super+0x3a/0x70 [116648.087956] cleanup_mnt+0xb4/0x160 [116648.088620] task_work_run+0x7e/0xc0 [116648.089285] exit_to_usermode_loop+0xfa/0x100 [116648.089933] do_syscall_64+0x1cb/0x220 [116648.090567] entry_SYSCALL_64_after_hwframe+0x49/0xbe [116648.091197] RIP: 0033:0x7f9cdc073b37 (...) [116648.100046] ---[ end trace 22e24db328ccadf8 ]--- [116648.100618] ------------[ cut here ]------------ [116648.101175] kernfs: can not remove 'used_bytes', no directory [116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80 (...) [116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1 (...) [116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80 (...) [116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282 [116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000 [116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8 [116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001 [116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120 [116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100 [116648.113268] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000 [116648.113939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0 [116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [116648.116649] Call Trace: [116648.117326] remove_files+0x31/0x70 [116648.117997] sysfs_remove_group+0x38/0x80 [116648.118671] sysfs_remove_groups+0x34/0x70 [116648.119342] kobject_del+0x20/0x60 [116648.120022] btrfs_free_block_groups+0x405/0x430 [btrfs] [116648.120707] close_ctree+0x19a/0x380 [btrfs] [116648.121396] generic_shutdown_super+0x6c/0x110 [116648.122057] kill_anon_super+0xe/0x30 [116648.122702] btrfs_kill_super+0x12/0xa0 [btrfs] [116648.123335] deactivate_locked_super+0x3a/0x70 [116648.123961] cleanup_mnt+0xb4/0x160 [116648.124586] task_work_run+0x7e/0xc0 [116648.125210] exit_to_usermode_loop+0xfa/0x100 [116648.125830] do_syscall_64+0x1cb/0x220 [116648.126463] entry_SYSCALL_64_after_hwframe+0x49/0xbe [116648.127080] RIP: 0033:0x7f9cdc073b37 (...) [116648.135923] ---[ end trace 22e24db328ccadf9 ]--- These happen because, during the unmount path, we call kobject_del() for raid kobjects that are not fully initialized, meaning that we set their ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set their parent kobject, which is done through btrfs_add_raid_kobjects(). We have this split raid kobject setup since commit 75cb379 ("btrfs: defer adding raid type kobject until after chunk relocation") in order to avoid triggering reclaim during contextes where we can not (either we are holding a transaction handle or some lock required by the transaction commit path), so that we do the calls to kobject_add(), which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects() in contextes where it is safe to trigger reclaim. That change expected that a new raid kobject can only be created either when mounting the filesystem or after raid profile conversion through the relocation path. However, we can have new raid kobject created in other two cases at least: 1) During device replace (or scrub) after adding a device a to the filesystem. The replace procedure (and scrub) do calls to btrfs_inc_block_group_ro() which can allocate a new block group with a new raid profile (because we now have more devices). This can be triggered by test cases btrfs/027 and btrfs/176. 2) During a degraded mount trough any write path. This can be triggered by test case btrfs/124. Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only makes things more complex and fragile, can also introduce deadlocks with reclaim the following way: 1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or anywhere in the replace/scrub path will cause a deadlock with reclaim because if reclaim happens and a transaction commit is triggered, the transaction commit path will block at btrfs_scrub_pause(). 2) During degraded mounts it is essentially impossible to figure out where to add extra calls to btrfs_add_raid_kobjects(), because allocation of a block group with a new raid profile can happen anywhere, which means we can't safely figure out which contextes are safe for reclaim, as we can either hold a transaction handle or some lock needed by the transaction commit path. So it is too complex and error prone to have this split setup of raid kobjects. So fix the issue by consolidating the setup of the kobjects in a single place, at link_block_group(), and setup a nofs context there in order to prevent reclaim being triggered by the memory allocations done through the call chain of kobject_add(). Besides fixing the sysfs warnings during kobject_del(), this also ensures the sysfs directories for the new raid profiles end up created and visible to users (a bug that existed before the 5.3 commit 7c7e301 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")). Fixes: 75cb379 ("btrfs: defer adding raid type kobject until after chunk relocation") Fixes: 7c7e301 ("btrfs: sysfs: Replace default_attrs in ktypes with groups") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Since commit 3582dd2 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [<ffffffffc01d95e5>] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd2 ("aoe: convert aoeblk to blk-mq") Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec hardkernel#3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 hardkernel#4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f hardkernel#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 hardkernel#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 hardkernel#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] hardkernel#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] hardkernel#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] hardkernel#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce hardkernel#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 hardkernel#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f hardkernel#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 hardkernel#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e hardkernel#3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 hardkernel#4 [ffff88272f5af330] mutex_lock at ffffffff81742133 hardkernel#5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] hardkernel#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd hardkernel#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 hardkernel#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 hardkernel#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 hardkernel#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 hardkernel#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 hardkernel#12 [ffff88272f5af760] new_slab at ffffffff811f4523 hardkernel#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 hardkernel#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b hardkernel#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 hardkernel#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 hardkernel#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] hardkernel#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 hardkernel#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] hardkernel#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] hardkernel#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] hardkernel#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c hardkernel#23 [ffff88272f5afec0] kthread at ffffffff810a8428 hardkernel#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

…atch_string()" This reverts commit 89e0341. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Peifeng Lin <pflin@suse.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>

Call to uverbs_close_fd() releases file pointer to 'ev_file' and mlx5_ib_dev is going to be inaccessible. Cache pointer prior cleaning resources to solve the KASAN warning below. BUG: KASAN: use-after-free in devx_async_event_close+0x391/0x480 [mlx5_ib] Read of size 8 at addr ffff888301e3cec0 by task devx_direct_tes/4631 CPU: 1 PID: 4631 Comm: devx_direct_tes Tainted: G OE 5.3.0-rc1-for-upstream-dbg-2019-07-26_01-19-56-93 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 Call Trace: dump_stack+0x9a/0xeb print_address_description+0x1e2/0x400 ? devx_async_event_close+0x391/0x480 [mlx5_ib] __kasan_report+0x15c/0x1df ? devx_async_event_close+0x391/0x480 [mlx5_ib] kasan_report+0xe/0x20 devx_async_event_close+0x391/0x480 [mlx5_ib] __fput+0x26a/0x7b0 task_work_run+0x10d/0x180 exit_to_usermode_loop+0x137/0x160 do_syscall_64+0x3c7/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f5df907d664 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 6a cd 20 00 48 63 ff 85 c0 75 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 f3 c3 66 90 48 83 ec 18 48 89 7c 24 08 e8 RSP: 002b:00007ffd353cb958 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 000056017a88c348 RCX: 00007f5df907d664 RDX: 00007f5df969d400 RSI: 00007f5de8f1ec90 RDI: 0000000000000006 RBP: 00007f5df9681dc0 R08: 00007f5de8736410 R09: 000056017a9d2dd0 R10: 000000000000000b R11: 0000000000000246 R12: 00007f5de899d7d0 R13: 00007f5df96c4248 R14: 00007f5de8f1ecb0 R15: 000056017ae41308 Allocated by task 4631: save_stack+0x19/0x80 kasan_kmalloc.constprop.3+0xa0/0xd0 alloc_uobj+0x71/0x230 [ib_uverbs] alloc_begin_fd_uobject+0x2e/0xc0 [ib_uverbs] rdma_alloc_begin_uobject+0x96/0x140 [ib_uverbs] ib_uverbs_run_method+0xdf0/0x1940 [ib_uverbs] ib_uverbs_cmd_verbs+0x57e/0xdb0 [ib_uverbs] ib_uverbs_ioctl+0x177/0x260 [ib_uverbs] do_vfs_ioctl+0x18f/0x1010 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x95/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4631: save_stack+0x19/0x80 __kasan_slab_free+0x11d/0x160 slab_free_freelist_hook+0x67/0x1a0 kfree+0xb9/0x2a0 uverbs_close_fd+0x118/0x1c0 [ib_uverbs] devx_async_event_close+0x28a/0x480 [mlx5_ib] __fput+0x26a/0x7b0 task_work_run+0x10d/0x180 exit_to_usermode_loop+0x137/0x160 do_syscall_64+0x3c7/0x490 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888301e3cda8 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 280 bytes inside of 512-byte region [ffff888301e3cda8, ffff888301e3cfa8) The buggy address belongs to the page: page:ffffea000c078e00 refcount:1 mapcount:0 mapping:ffff888352811300 index:0x0 compound_mapcount: 0 flags: 0x2fffff80010200(slab|head) raw: 002fffff80010200 ffffea000d152608 ffffea000c077808 ffff888352811300 raw: 0000000000000000 0000000000250025 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888301e3cd80: fc fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb ffff888301e3ce00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3ce80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3cf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888301e3cf80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc Disabling lock debugging due to kernel taint Cc: <stable@vger.kernel.org> # 5.2 Fixes: 7597385 ("IB/mlx5: Enable subscription for device events over DEVX") Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: https://lore.kernel.org/r/20190808081538.28772-1-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>

…OL_MF_STRICT were specified When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should try best to migrate misplaced pages, if some of the pages could not be migrated, then return -EIO. There are three different sub-cases: 1. vma is not migratable 2. vma is migratable, but there are unmovable pages 3. vma is migratable, pages are movable, but migrate_pages() fails If #1 happens, kernel would just abort immediately, then return -EIO, after a7f40cf ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"). If hardkernel#3 happens, kernel would set policy and migrate pages with best-effort, but won't rollback the migrated pages and reset the policy back. Before that commit, they behaves in the same way. It'd better to keep their behavior consistent. But, rolling back the migrated pages and resetting the policy back sounds not feasible, so just make #1 behave as same as hardkernel#3. Userspace will know that not everything was successfully migrated (via -EIO), and can take whatever steps it deems necessary - attempt rollback, determine which exact page(s) are violating the policy, etc. Make queue_pages_range() return 1 to indicate there are unmovable pages or vma is not migratable. The #2 is not handled correctly in the current kernel, the following patch will fix it. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-2-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When running syzkaller internally, we ran into the below bug on 4.9.x kernel: kernel BUG at mm/huge_memory.c:2124! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 task: ffff880067b34900 task.stack: ffff880068998000 RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 Call Trace: split_huge_page include/linux/huge_mm.h:100 [inline] queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:90 [inline] walk_pgd_range mm/pagewalk.c:116 [inline] __walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208 walk_page_range+0x154/0x370 mm/pagewalk.c:285 queue_pages_range+0x115/0x150 mm/mempolicy.c:694 do_mbind mm/mempolicy.c:1241 [inline] SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370 SyS_mbind+0x46/0x60 mm/mempolicy.c:1352 do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282 entry_SYSCALL_64_after_swapgs+0x5d/0xdb Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c RIP [<ffffffff81895d6b>] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 RSP <ffff88006899f980> with the below test: uint64_t r[1] = {0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); intptr_t res = 0; res = syscall(__NR_socket, 0x11, 3, 0x300); if (res != -1) r[0] = res; *(uint32_t*)0x20000040 = 0x10000; *(uint32_t*)0x20000044 = 1; *(uint32_t*)0x20000048 = 0xc520; *(uint32_t*)0x2000004c = 1; syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10); syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0); *(uint64_t*)0x20000340 = 2; syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3); return 0; } Actually the test does: mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 socket(AF_PACKET, SOCK_RAW, 768) = 3 setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0 mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000 mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0 The setsockopt() would allocate compound pages (16 pages in this test) for packet tx ring, then the mmap() would call packet_mmap() to map the pages into the user address space specified by the mmap() call. When calling mbind(), it would scan the vma to queue the pages for migration to the new node. It would split any huge page since 4.9 doesn't support THP migration, however, the packet tx ring compound pages are not THP and even not movable. So, the above bug is triggered. However, the later kernel is not hit by this issue due to commit d44d363 ("mm: don't assume anonymous pages have SwapBacked flag"), which just removes the PageSwapBacked check for a different reason. But, there is a deeper issue. According to the semantic of mbind(), it should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and MPOL_MF_STRICT was also specified, but the kernel was unable to move all existing pages in the range. The tx ring of the packet socket is definitely not movable, however, mbind() returns success for this case. Although the most socket file associates with non-movable pages, but XDP may have movable pages from gup. So, it sounds not fine to just check the underlying file type of vma in vma_migratable(). Change migrate_page_add() to check if the page is movable or not, if it is unmovable, just return -EIO. But do not abort pte walk immediately, since there may be pages off LRU temporarily. We should migrate other pages if MPOL_MF_MOVE* is specified. Set has_unmovable flag if some paged could not be not moved, then return -EIO for mbind() eventually. With this change the above test would return -EIO as expected. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-3-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-3-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ hardkernel#321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

I -thought- I had fixed this entirely, but it looks like that I didn't test this thoroughly enough as we apparently still make one big mistake with nv50_msto_atomic_check() - we don't handle the following scenario: * CRTC #1 has n VCPI allocated to it, is attached to connector DP-4 which is attached to encoder #1. enabled=y active=n * CRTC #1 is changed from DP-4 to DP-5, causing: * DP-4 crtc=#1→NULL (VCPI n→0) * DP-5 crtc=NULL→#1 * CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5 * CRTC #1 maintains the same mode as before, just with a different connector * mode_changed=n connectors_changed=y (we _SHOULD_ do VCPI 0→n here, but don't) Once the above scenario is repeated once, we'll attempt freeing VCPI from the connector that we didn't allocate due to the connectors changing, but the mode staying the same. Sigh. Since nv50_msto_atomic_check() has broken a few times now, let's rethink things a bit to be more careful: limit both VCPI/PBN allocations to mode_changed || connectors_changed, since neither VCPI or PBN should ever need to change outside of routing and mode changes. Changes since v1: * Fix accidental reversal of clock and bpp arguments in drm_dp_calc_pbn_mode() - William Lewis Signed-off-by: Lyude Paul <lyude@redhat.com> Reported-by: Bohdan Milar <bmilar@redhat.com> Tested-by: Bohdan Milar <bmilar@redhat.com> Fixes: 232c9ee ("drm/nouveau: Use atomic VCPI helpers for MST") References: 412e85b ("drm/nouveau: Only release VCPI slots on mode changes") Cc: Lyude Paul <lyude@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@redhat.com> Cc: Jerry Zuo <Jerry.Zuo@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Juston Li <juston.li@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: <stable@vger.kernel.org> # v5.1+ Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com

If driver probe needs to be deferred, e.g. because ci_hdrc_add_device() isn't ready yet, this driver currently misbehaves badly: a) success is still reported to the driver core (meaning a 2nd probe attempt will never be done), leaving the driver in a dysfunctional state and the hardware unusable b) driver remove / shutdown OOPSes: [ 206.786916] Unable to handle kernel paging request at virtual address fffffdff [ 206.794148] pgd = 880b9f82 [ 206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000 [ 206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM [ 206.808581] Modules linked in: wl18xx evbug [ 206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1 [ 206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 206.826813] PC is at ci_hdrc_remove_device+0x4/0x20 [ 206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8 [ 206.836407] pc : [<805cd4b0>] lr : [<805d62cc>] psr: 20000013 [ 206.842678] sp : a806be40 ip : 00000001 fp : 80adbd3c [ 206.847906] r10: 80b1b794 r9 : 80d5dfe0 r8 : a8192c44 [ 206.853136] r7 : 80db93a0 r6 : a8192c10 r5 : a8192c00 r4 : a93a4a00 [ 206.859668] r3 : 00000000 r2 : a8192ce4 r1 : ffffffff r0 : fffffdfb [ 206.866201] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 206.873341] Control: 10c5387d Table: a9e0c06a DAC: 00000051 [ 206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c) [ 206.885624] Stack: (0xa806be40 to 0xa806c000) [ 206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000 [ 206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08 [ 206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08 [ 206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005 [ 206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc [ 206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001 [ 206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20 [ 206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140 [ 206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600 [ 206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000 [ 206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058 [ 206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000 [ 207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8) [ 207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218) [ 207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50) [ 207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0) [ 207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 207.045308] Exception stack(0xa806bfa8 to 0xa806bff0) [ 207.050368] bfa0: 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 [ 207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004) [ 207.078021] ---[ end trace be47424e3fd46e9f ]--- [ 207.082647] Kernel panic - not syncing: Fatal exception [ 207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]--- c) the error path in combination with driver removal causes imbalanced calls to the clk_*() and pm_()* APIs a) happens because the original intended return value is overwritten (with 0) by the return code of regulator_disable() in ci_hdrc_imx_probe()'s error path b) happens because ci_pdev is -EPROBE_DEFER, which causes ci_hdrc_remove_device() to OOPS Fix a) by being more careful in ci_hdrc_imx_probe()'s error path and not overwriting the real error code Fix b) by calling the respective cleanup functions during remove only when needed (when ci_pdev != NULL, i.e. when everything was initialised correctly). This also has the side effect of not causing imbalanced clk_*() and pm_*() API calls as part of the error code path. Fixes: 7c8e890 ("usb: chipidea: imx: add HSIC support") Signed-off-by: André Draszik <git@andred.net> Cc: stable <stable@vger.kernel.org> CC: Peter Chen <Peter.Chen@nxp.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: linux-usb@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xiaoyao888888 and others added 30 commits September 29, 2018 14:57

net: wireless: rtl8723ds: fixed some issues

aaa12bf

1. fix disconnection during suspend/resume 2. fix unable to wake during suspend Change-Id: I3e1d535e7cee536a253446dc482d85f54a612323 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

net: wireless: update bcmdhd driver to "1.579.77.41.9 (r)"

71282b6

Change-Id: I5b5a30393157192fd8c1c033169931e7d5b03df0 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

serial: 8250: add line error log

00af0cf

Change-Id: I69fe6f0c0857ade25e777be388fcab6261f1a533 Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>

media: rockchip: isp1: change max value of isp input

b44340f

Change-Id: Ie4d437d9a2e4ec965952707561c0950889dbbc01 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

media: i2c: ov13850: add 4224x3136 setting

df7228d

Change-Id: I12397bb36ad7cdcf506b8d685a5131c5d2358318 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

net: wireless: bcmdhd: fix some issues for driver "1.579.77.41.9 (r)"

c3dd8a9

1. disable tuning during sdio sleep 2. add get_oob_irq_flags interface for request_irq(flags) Change-Id: Ic77fd82fc3f93a813512ecceaed2c75fe204b750 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

arm64: rockchip_linux_defconfig: build the wifi as module by default

b37da06

As the external/rkwifibt will callback the wifi module to instead of build-in for linux. Change-Id: Id6daabc21c06fb48e6fc1a74cc3d6ad1db6898f1 Signed-off-by: Caesar Wang <wxt@rock-chips.com>

media: i2c: add g_frame_interval function

d463ec3

Change-Id: Iae23985499357d9e544bd94ed779ca4742e49c42 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

media: i2c: ov13850: fix fps is not correct on full size mode

746e0c0

the correct fps of full size mode is 7.5fps, is not 7fps. Change-Id: I059fa403ea4a4f1e99c38ddea077e06925840505 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

net: wireless: rkwifi: add SUPPORT_P2P_GO_PS to fix suspend issue

51b1df1

Change-Id: I23f563c1de9527f2a17ccbe90a61516b4f76b2a8 Signed-off-by: Yao Xiao <xiaoyao@rock-chips.com>

media: rockchip: isp1: change list_del sequence for oops error

35ff43b

Change-Id: I5335a4929167736359f97acb7ff9b651260dd05e Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

media: i2c: tc35874x: Fix tc35874x cannot work properly

446d3c6

1.Change the format to MEDIA_BUS_FMT_UYVY8_2X8. 2.Add the PIXEL_RATE for control handlers. Change-Id: I4f40e3d90765c12702210f88ad60f2147d328456 Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

arm64: config: rockchip_linux_defconfig: enable CONFIG_VIDEO_TC35874X

f1b8f4c

Change-Id: Iabd99b8b007a49ae5fd2babf99497706c276e32e Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

arm64: dts: rockchip: Add tc358749x node for rk3399-sapphire-excavato…

d2b2db9

…r board Change-Id: Ie4d8d2401bd7b717703f539da7073f30904e1926 Signed-off-by: Leo Wen <leo.wen@rock-chips.com>

dt-bindings: Document add imx323

c765b5a

Change-Id: I364b1a6fffdd4e2ac2461a16f872d22190c2c163 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

media: i2c: add imx323 driver

863bdc0

Change-Id: I273af9c7bfd205e5bf4406c105fb568c0928d274 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

media: rockchip: isp1: Support for RK1808

7ac7947

Change-Id: I652237cf447ce16c7a8f14a8f2608f1c16f62480 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

media: rockchip: isp1: config grf dvp datawidth

e6a6de2

Change-Id: I173a2054d3f3878d0cc8b4f12236a5ce3f050834 Signed-off-by: Cai YiWei <cyw@rock-chips.com>

media: soc_camera: ov13850: fix fps is not correct

ac3ca7a

Change-Id: Ice351569214c2681a36ec0791ab551cf8d0d8076 Signed-off-by: Hu Kejun <william.hu@rock-chips.com>

drivers/input: remove unused lightsensor drivers

5914172

Change-Id: I0d42b822e0cf89a416b04eb18c1c3dc814fb5ac3 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

input: keyboard: rk_keys: remove include adc.h

c67f1f5

Change-Id: Id0ed268231deeb1bc623532c6ca5f989942a6145 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

drivers/power: remove unused adc battery drivers

1588f44

Change-Id: I66df7628ad921e5eddacdcd03eeb105c66a8dd41 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

drivers/headset_observe/rk_headset_irq_hook_adc: remove include adc.h

3d70659

Change-Id: I43ec817507e791d2194c4b65b18cdf90bd4db09a Signed-off-by: Tao Huang <huangtao@rock-chips.com>

drivers/input/sensors/lsensor: remove unused ls_photoresistor driver

e593c9c

Change-Id: Id49ba18a182add9cd1b2e53539b6fff0255c8cd8 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

drivers: remove unused adc driver

ae74496

Change-Id: I71a79cf4372d2645537e3b8d19253487eb9039a2 Signed-off-by: Tao Huang <huangtao@rock-chips.com>

i2c: rk3x: Add slave_hold_scl ipd clean

afc9d7c

The bit7 of I2C_IPD register also needs to be clean, otherwise, it will always exist. Change-Id: Iee01bffd83909e84ed99c9fab821e621c970efd3 Signed-off-by: David Wu <david.wu@rock-chips.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Add support for lirc_odroid blaster, SPI flash and petitboot #1

Add support for lirc_odroid blaster, SPI flash and petitboot #1

mad-ady commented Jan 11, 2019

Add support for lirc_odroid blaster, SPI flash and petitboot #1

Add support for lirc_odroid blaster, SPI flash and petitboot #1

Conversation

mad-ady commented Jan 11, 2019