Improve temperature runaway, idle timeout (#19339)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
MarlinFirmware · Sep 14, 2020 · 979876e · 979876e
1 parent cf8316b
commit 979876e
Show file tree

Hide file tree

Showing 33 changed files with 153 additions and 201 deletions.
diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp
@@ -484,7 +484,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
   // Start the heater idle timers
   const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT);
 
-  HOTEND_LOOP() thermalManager.hotend_idle[e].start(nozzle_timeout);
+  HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
 
   #if ENABLED(DUAL_X_CARRIAGE)
     const int8_t saved_ext        = active_extruder;
@@ -503,7 +503,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
 
     // If the nozzle has timed out...
     if (!nozzle_timed_out)
-      HOTEND_LOOP() nozzle_timed_out |= thermalManager.hotend_idle[e].timed_out;
+      HOTEND_LOOP() nozzle_timed_out |= thermalManager.heater_idle[e].timed_out;
 
     // Wait for the user to press the button to re-heat the nozzle, then
     // re-heat the nozzle, re-show the continue prompt, restart idle timers, start over
@@ -533,7 +533,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
       // Start the heater idle timers
       const millis_t nozzle_timeout = SEC_TO_MS(PAUSE_PARK_NOZZLE_TIMEOUT);
 
-      HOTEND_LOOP() thermalManager.hotend_idle[e].start(nozzle_timeout);
+      HOTEND_LOOP() thermalManager.heater_idle[e].start(nozzle_timeout);
       TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), CONTINUE_STR));
       TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired_P(PSTR("Reheat finished.")));
       wait_for_user = true;
@@ -588,7 +588,7 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le
   // Re-enable the heaters if they timed out
   bool nozzle_timed_out = false;
   HOTEND_LOOP() {
-    nozzle_timed_out |= thermalManager.hotend_idle[e].timed_out;
+    nozzle_timed_out |= thermalManager.heater_idle[e].timed_out;
     thermalManager.reset_hotend_idle_timer(e);
   }
 

diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
@@ -56,6 +56,15 @@
   #undef SHOW_TEMP_ADC_VALUES
 #endif
 
+#if TEMP_SENSOR_BED == 0
+  #undef THERMAL_PROTECTION_BED
+  #undef THERMAL_PROTECTION_BED_PERIOD
+#endif 
+
+#if TEMP_SENSOR_CHAMBER == 0
+  #undef THERMAL_PROTECTION_CHAMBER
+#endif
+
 #if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS))
   #define HAS_MIXER_SYNC_CHANNEL 1
 #endif

diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
@@ -521,7 +521,7 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
 
 FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char prefix, const bool blink) {
   #if HAS_HEATED_BED
-    const bool isBed = heater_id < 0;
+    const bool isBed = TERN(HAS_HEATED_CHAMBER, heater_id == H_BED, heater_id < 0);
     const float t1 = (isBed ? thermalManager.degBed()       : thermalManager.degHotend(heater_id)),
                 t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id));
   #else
@@ -536,14 +536,7 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char pr
   #if !HEATER_IDLE_HANDLER
     UNUSED(blink);
   #else
-    const bool is_idle = (
-      #if HAS_HEATED_BED
-        isBed ? thermalManager.bed_idle.timed_out :
-      #endif
-      thermalManager.hotend_idle[heater_id].timed_out
-    );
-
-    if (!blink && is_idle) {
+    if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) {
       lcd_put_wchar(' ');
       if (t2 >= 10) lcd_put_wchar(' ');
       if (t2 >= 100) lcd_put_wchar(' ');
@@ -560,27 +553,14 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char pr
 }
 
 FORCE_INLINE void _draw_bed_status(const bool blink) {
-  _draw_heater_status(H_BED, (
-      #if HAS_LEVELING
-        planner.leveling_active && blink ? '_' :
-      #endif
-      LCD_STR_BEDTEMP[0]
-    ),
-    blink
-  );
+  _draw_heater_status(H_BED, TERN0(HAS_LEVELING, blink && planner.leveling_active) ? '_' : LCD_STR_BEDTEMP[0], blink);
 }
 
 #if HAS_PRINT_PROGRESS
 
   FORCE_INLINE void _draw_print_progress() {
     const uint8_t progress = ui.get_progress_percent();
-    lcd_put_u8str_P(PSTR(
-      #if ENABLED(SDSUPPORT)
-        "SD"
-      #elif ENABLED(LCD_SET_PROGRESS_MANUALLY)
-        "P:"
-      #endif
-    ));
+    lcd_put_u8str_P(PSTR(TERN(SDSUPPORT, "SD", "P:")));
     if (progress)
       lcd_put_u8str(ui8tostr3rj(progress));
     else

diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp
@@ -254,7 +254,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     if (PAGE_UNDER(7)) {
       #if HEATER_IDLE_HANDLER
-        const bool dodraw = (blink || !thermalManager.hotend_idle[heater_id].timed_out);
+        const bool dodraw = (blink || !thermalManager.heater_idle[heater_id].timed_out);
       #else
         constexpr bool dodraw = true;
       #endif
@@ -327,7 +327,7 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
 
     if (PAGE_UNDER(7)) {
       #if HEATER_IDLE_HANDLER
-        const bool dodraw = (blink || !thermalManager.bed_idle.timed_out);
+        const bool dodraw = (blink || !thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out);
       #else
         constexpr bool dodraw = true;
       #endif

diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp
@@ -308,7 +308,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop
       lcd_put_u8str(i16tostr3rj(thermalManager.degHotend(extruder)));
       lcd_put_wchar('/');
 
-      if (get_blink() || !thermalManager.hotend_idle[extruder].timed_out)
+      if (get_blink() || !thermalManager.heater_idle[extruder].timed_out)
         lcd_put_u8str(i16tostr3rj(thermalManager.degTargetHotend(extruder)));
     }
 

diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp
@@ -223,7 +223,7 @@ namespace ExtUI {
 
   bool isHeaterIdle(const extruder_t extruder) {
     #if HAS_HOTEND && HEATER_IDLE_HANDLER
-      return thermalManager.hotend_idle[extruder - E0].timed_out;
+      return thermalManager.heater_idle[extruder - E0].timed_out;
     #else
       UNUSED(extruder);
       return false;
@@ -233,10 +233,10 @@ namespace ExtUI {
   bool isHeaterIdle(const heater_t heater) {
     #if HEATER_IDLE_HANDLER
       switch (heater) {
-        TERN_(HAS_HEATED_BED, case BED: return thermalManager.bed_idle.timed_out);
+        TERN_(HAS_HEATED_BED, case BED: return thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out);
         TERN_(HAS_HEATED_CHAMBER, case CHAMBER: return false); // Chamber has no idle timer
         default:
-          return TERN0(HAS_HOTEND, thermalManager.hotend_idle[heater - H0].timed_out);
+          return TERN0(HAS_HOTEND, thermalManager.heater_idle[heater - H0].timed_out);
       }
     #else
       UNUSED(heater);

diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
@@ -410,10 +410,6 @@ namespace Language_cz {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("TEPL. ÚNIK KOMORA");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("VYSOKÁ TEPLOTA");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("NÍZKA TEPLOTA");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("VYS. TEPL. PODL.");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("NÍZ. TEPL. PODL.");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Err: MAXTEMP KOMORA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Err: MINTEMP KOMORA");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("TISK. ZASTAVENA");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Proveďte reset");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d");

diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h
@@ -142,8 +142,6 @@ namespace Language_da {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("Temp løber løbsk");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Fejl: Maks temp");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Fejl: Min temp");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Fejl: Maks Plade temp");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Fejl: Min Plade temp");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("PRINTER STOPPET");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Reset Venligst");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // Kun et bogstav

diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h
@@ -452,10 +452,6 @@ namespace Language_de {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("GEH.") " " LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = " " LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = " " LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Err:Gehäuse max Temp");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Err:Gehäuse min Temp");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("DRUCKER GESTOPPT");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Bitte neustarten");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("t"); // One character only

diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h
@@ -180,8 +180,6 @@ namespace Language_el {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΚΡΑΣΙΑΣ");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("ΠΕΡΙΤΗ ΘΕΡΜΟΚΡΑΣΙΑ");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("ΜΗ ΕΠΑΡΚΗΣ ΘΕΡΜΟΚΡΑΣΙΑΣ"); //SHORTEN
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("ΜΕΓΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ"); //SHORTEN
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΚΡΑΣΙΑΣ ΕΠ. ΕΚΤΥΠΩΣΗΣ"); //SHORTEN
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("H εκτύπωση διακόπηκε");
   PROGMEM Language_Str MSG_HEATING                         = _UxGT("Θερμαίνεται…");
   PROGMEM Language_Str MSG_BED_HEATING                     = _UxGT("Θέρμανση ΕΠ. Εκτύπωσης"); //SHORTEN

diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h
@@ -182,8 +182,6 @@ namespace Language_el_gr {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("ΔΙΑΦΥΓΗ ΘΕΡΜΟΤΗΤΑΣ");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Λάθος: ΜΕΓΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Λάθος: ΕΛΑΧΙΣΤΗ ΘΕΡΜΟΤΗΤΑ ΚΛΙΝΗΣ");
   PROGMEM Language_Str MSG_HEATING                         = _UxGT("Θερμαίνεται…");
   PROGMEM Language_Str MSG_BED_HEATING                     = _UxGT("Θέρμανση κλίνης…");
   PROGMEM Language_Str MSG_DELTA_CALIBRATE                 = _UxGT("Βαθμονόμηση Delta");

diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h
@@ -457,10 +457,6 @@ namespace Language_en {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("CHAMBER T. RUNAWAY");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Err: MAXTEMP");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Err: MINTEMP");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Err: MAXTEMP BED");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Err: MINTEMP BED");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Err: MAXTEMP CHAMBER");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Err: MINTEMP CHAMBER");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("PRINTER HALTED");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Please Reset");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // One character only

diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h
@@ -421,10 +421,6 @@ namespace Language_es {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("FUGA TÉRMICA CAMARA");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Err:TEMP. MÁX");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Err:TEMP. MIN");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Err:TEMP. MÁX CAMA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Err:TEMP. MIN CAMA");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Err:TEMP. MÁX CÁMARA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Err:TEMP. MIN CÁMARA");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("IMPRESORA DETENIDA");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Por favor, reinicie");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // One character only

diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h
@@ -244,8 +244,6 @@ namespace Language_eu {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("TENP. KONTROL EZA");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Err: Tenp Maximoa");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Err: Tenp Minimoa");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Err: Ohe Tenp Max");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Err: Ohe Tenp Min");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("INPRIMA. GELDIRIK");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Berrabia. Mesedez");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // One character only

diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h
@@ -443,10 +443,6 @@ namespace Language_gl {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("FUGA TÉRMICA CÁMARA");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Erro:TEMP MÁX");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Erro:TEMP MÍN");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Erro:TEMP MÁX CAMA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Erro:TEMP MÍN CAMA");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Erro:TEMP MÁX CÁMARA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Erro:TEMP MÍN CÁMARA");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("IMPRESORA DETIDA");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Debe reiniciar!");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // One character only

diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h
@@ -445,10 +445,6 @@ namespace Language_hu {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("KAMRA FÜTÉS KIMARADÁS");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Hiba: MAX Höfok");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Hiba: MIN Höfok");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Hiba: MAX ÁGY HÖFOK");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Hiba: MIN ÁGY HÖFOK");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Hiba: MAX KAMRA HÖFOK");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Hiba: MIN KAMRA HÖFOK");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("A NYOMTATÓ LEFAGYOTT");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Indítsd újra!");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("n"); // Csak egy karakter

diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h
@@ -457,10 +457,6 @@ namespace Language_it {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("T.CAMERA FUORI CTRL");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Err: TEMP MASSIMA");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Err: TEMP MINIMA");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Err: TEMP MAX PIATTO");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Err: TEMP MIN PIATTO");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Err: TEMP MAX CAMERA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Err: TEMP MIN CAMERA");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("STAMPANTE FERMATA");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Riavviare prego");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("g"); // Un solo carattere

diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h
@@ -184,8 +184,6 @@ namespace Language_jp_kana {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("ネツボウソウ");                   // "THERMAL RUNAWAY"
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("エラー:サイコウオンチョウカ");         // "Err: MAXTEMP"
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("エラー:サイテイオンミマン");          // "Err: MINTEMP"
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("エラー:ベッド サイコウオンチョウカ");    // "Err: MAXTEMP BED"
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("エラー:ベッド サイテイオンミマン");     // "Err: MINTEMP BED"
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("プリンターハテイシシマシタ");         // "PRINTER HALTED"
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("リセットシテクダサイ");              // "Please reset"
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d");                          // One character only

diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h
@@ -164,8 +164,6 @@ namespace Language_nl {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("Therm. wegloop");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Err: Max. temp");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Err: Min. temp");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Err: Max.tmp bed");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Err: Min.tmp bed");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("PRINTER GESTOPT");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Reset A.U.B.");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); //  One character only. Keep English standard

diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h
@@ -391,10 +391,6 @@ namespace Language_pl {
   PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("ZANIK TEMP.KOMORY");
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("Błąd: MAXTEMP");
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("Błąd: MINTEMP");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("Błąd: MAXTEMP STÓŁ");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("Błąd: MINTEMP STÓŁ");
-  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("Błąd: MAXTEMP KOMORA");
-  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("Błąd: MINTEMP KOMORA");
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("Drukarka zatrzym.");
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("Proszę zresetować");
   PROGMEM Language_Str MSG_SHORT_DAY                       = _UxGT("d"); // One character only