touchlink fails with "'BUFFER' not available" error

[falcke]

Zigbee2MQTT version: 1.15.0
Adapter hardware: CC1352P-2
Adapter firmware version: Z-Stack 3.x.0 20200925 firmware (#212)

reproducible: always
how I've started touchlink: as described here
expected: touchlink should start
what happend: I'm trying to get touchlink running but it fails with a Error: Write for 'BUFFER' not available Here's the full message

[Koenkk]

could you provide the herdsman debug logging of this issue?

To enable herdsman debug logging, see https://www.zigbee2mqtt.io/information/debug.html#zigbee-herdsman-debug-logging

[falcke]

could you provide the herdsman debug logging of this issue?

To enable herdsman debug logging, see https://www.zigbee2mqtt.io/information/debug.html#zigbee-herdsman-debug-logging

Here's what you've asked for. Thank you very much and please let me know if I can provide any further information.

[Koenkk]

Fixed!

Changes will be available in the latest dev branch in a few hours (https://www.zigbee2mqtt.io/how_tos/how-to-switch-to-dev-branch.html)

[IntegersOfK]

I had the same problem and Googled for this issue. Dev branch solved it for me, thank you. Just thought it might be nice to have another confirmation.

[wilcomir]

I can confirm I had the same issue, switching to the dev branch fixed it for me. Thanks Koen! Enjoy your evening.

[falcke]

Sorry for the delay. I made it to use the dev branch now and I'm getting these messages now. Is it related or something different? Thank you so far!

[ash-vd]

I'm not sure if it's related, but when I try to start Touchlink I get a time-out: error":"SRSP - AF - interPanCtl after 6000ms. When I try to restart zigbee2mqtt I get another timeout that it can't find my adapter anymore. The only way to fix it is to reprogram my zig-a-zig-ah. I'm using z2m 1.16, and the CC26X2R1_20201026 coordinator firmware.