Xiaomi wired wall switch not fully working after update to 0.1.4/0.1.5

[Robertops]

Hi,

I'm having problems trying to control QBKG03LM after update. If I press the switch manually the status changes in Home Assistant as it should, it works fine. But if I try to toggle the switch in HA zigbee2mqtt gives me the following warning:

zigbee2mqtt:warn 2018-9-19 16:14:10 Cannot handle MQTT message with topic 'zigbee2mqtt/0x00158d00024598bd/left/set' and message 'ON'

It was working fine before. I also updated HA to 0.78.0, don't know if this update broke something.

All my other devices (sensors) are working fine.

Full log:
https://pastebin.com/fbEbSmqQ

[Koenkk]

This is (high likely) due to c22f8b3, will look into it, thanks for reporting.

[Koenkk]

Can you check if this has been fixed in https://github.com/Koenkk/zigbee2mqtt/tree/issue_387

[Robertops]

Thank you for looking at this.

Tested and it looks like it's missing one parameter, which switch should be turned on:

zigbee2mqtt:info 2018-9-20 18:27:26 Zigbee publish to '0x00158d00024598bd', genOnOff - on - {} - null zigbee2mqtt:info 2018-9-20 18:27:26 Zigbee publish to '0x00158d00024598bd', genOnOff - on - {} - null zigbee2mqtt:error 2018-9-20 18:27:56 Zigbee publish to '0x00158d00024598bd', genOnOff - on - {} - null failed with error Error: Timed out after 30000 ms zigbee2mqtt:error 2018-9-20 18:27:56 Zigbee publish to '0x00158d00024598bd', genOnOff - on - {} - null failed with error Error: Timed out after 30000 ms

[Koenkk]

Should be fixed now, can you update and try again?

[Robertops]

Fixed! Thank you Koen!

zigbee2mqtt:info 2018-9-21 09:57:49 Zigbee publish to '0x00158d00024598bd', genOnOff - on - {} - 2

[Koenkk]

Fixed in 0.1.6!

[dzungpv]

@Koenkk this fix not include in dev branch, please merge it