PR to merge upstream changes #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…ernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix function/preempt trace hangs - a few build fixes * tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c MIPS: launch.h: add include guard to prevent build errors MIPS: alchemy: xxs1500: add gpio-au1000.h header file
…linux/kernel/git/kees/linux Pull clang feature fixes from Kees Cook: - Correctly pass stack frame size checking under LTO (Nick Desaulniers) - Avoid CFI mismatches by checking initcall_t types (Marco Elver) * tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: Makefile: LTO: have linker check -Wframe-larger-than init: verify that function is initcall_t at compile-time
…el/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A slightly high volume at this time due to pending ASoC fixes. While there are a few generic simple-card fixes for regressions, most of the changes are device-specific fixes: ASoC Intel SOF, codec clocks, other codec / platform fixes as well as usual HD-audio and USB-audio" * tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits) ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8 ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8 ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8 ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340 ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i ALSA: hda/realtek: Headphone volume is controlled by Front mixer ALSA: usb-audio: scarlett2: Improve driver startup messages ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci ALSA: usb-audio: fix control-request direction ASoC: qcom: lpass-cpu: Use optional clk APIs ASoC: cs35l33: fix an error code in probe() ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency ASoC: cs42l52: Minor tidy up of error paths ASoC: cs35l32: Add missing regmap use_single config ASoC: cs35l34: Add missing regmap use_single config ASoC: cs42l73: Add missing regmap use_single config ASoC: cs53l30: Add missing regmap use_single config ...
…y/linux-nfs Pull NFS client bugfixes from Trond Myklebust: "Stable fixes: - Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config - Fix Oops in xs_tcp_send_request() when transport is disconnected - Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Bugfixes: - Fix instances where signal_pending() should be fatal_signal_pending() - fix an incorrect limit in filelayout_decode_layout() - Fixes for the SUNRPC backlogged RPC queue - Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce() - Revert commit 586a078 ("Clean up rpcrdma_prepare_readch()")" * tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Remove trailing semicolon in macros xprtrdma: Revert 586a078 NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config NFS: Clean up reset of the mirror accounting variables NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce() NFS: Fix an Oopsable condition in __nfs_pageio_add_request() SUNRPC: More fixes for backlog congestion SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() SUNRPC in case of backlog, hand free slots directly to waiting task pNFS/NFSv4: Remove redundant initialization of 'rd_size' NFS: fix an incorrect limit in filelayout_decode_layout() fs/nfs: Use fatal_signal_pending instead of signal_pending
MPTCP sk_forward_memory handling is a bit special, as such field is protected by the msk socket spin_lock, instead of the plain socket lock. Currently we have a code path updating such field without handling the relevant lock: __mptcp_retrans() -> __mptcp_clean_una_wakeup() Several helpers in __mptcp_clean_una_wakeup() will update sk_forward_alloc, possibly causing such field corruption, as reported by Matthieu. Address the issue providing and using a new variant of blamed function which explicitly acquires the msk spin lock. Fixes: 64b9cea ("mptcp: fix spurious retransmissions") Closes: multipath-tcp/mptcp_net-next#172 Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In subflow_syn_recv_sock() we currently skip options parsing for OoO packet, given that such packets may not carry the relevant MPC option. If the peer generates an MPC+data TSO packet and some of the early segments are lost or get reorder, we server will ignore the peer key, causing transient, unexpected fallback to TCP. The solution is always parsing the incoming MPTCP options, and do the fallback only for in-order packets. This actually cleans the existing code a bit. Fixes: d22f498 ("mptcp: process MP_CAPABLE data option") Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When some mapping related errors occurs we close the main MPC subflow with a RST. We should instead fallback gracefully to TCP, and do the reset only for MPJ subflows. Fixes: d22f498 ("mptcp: process MP_CAPABLE data option") Closes: multipath-tcp/mptcp_net-next#192 Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit noted that we can have fallback scenario due to OoO (or packet drop). Update the self-tests accordingly Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau says: ==================== mptcp: Fixes for 5.13 These patches address two issues in MPTCP. Patch 1 fixes a locking issue affecting MPTCP-level retransmissions. Patches 2-4 improve handling of out-of-order packet arrival early in a connection, so it falls back to TCP rather than forcing a reset. Includes a selftest. ==================== Link: https://lore.kernel.org/r/20210527233140.182728-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull cifs fixes from Steve French: "Three SMB3 fixes. Two for stable, and the other fixes a problem pointed out with a recently added ioctl" * tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: change format of CIFS_FULL_KEY_DUMP ioctl cifs: fix string declarations and assignments in tracepoints cifs: set server->cipher_type to AES-128-CCM for SMB3.0
….org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix error checking of BPF prog attachment in 'perf stat'. - Fix getting maximum number of fds in the vendor events JSON parser. - Move debug initialization earlier, fixing a segfault in some cases. - Fix eventcode of power10 JSON events. * tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf vendor events powerpc: Fix eventcode of power10 JSON events perf stat: Fix error check for bpf_program__attach perf debug: Move debug initialization earlier perf jevents: Fix getting maximum number of fds
…/drm Pull drm fixes from Dave Airlie: "Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise. ttm: - prevent irrelevant swapout amdgpu: - MultiGPU fan fix - VCN powergating fixes amdkfd: - Fix SDMA register offset error meson: - fix shutdown crash i915: - Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4" * tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm: drm/ttm: Skip swapout if ttm object is not populated drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4 drm/meson: fix shutdown crash when component not probed drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error drm/amd/pm: correct MGpuFanBoost setting
Pull io_uring fixes from Jens Axboe: "A few minor fixes: - Fix an issue with hashed wait removal on exit (Zqiang, Pavel) - Fix a recent data race introduced in this series (Marco)" * tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block: io_uring: fix data race to avoid potential NULL-deref io-wq: Fix UAF when wakeup wqe in hash waitqueue io_uring/io-wq: close io-wq full-stop gap
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou
Pu)
- fix false keep-alive timeout when a controller is torn down
(Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)
- MD pull request (Song):
- Fix incorrect chunk boundary assert (Christoph)
- Fix s390/dasd verification panic (Stefan)
* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
nvmet: fix false keep-alive timeout when a controller is torn down
nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
md/raid5: remove an incorrect assert in in_chunk_boundary
s390/dasd: add missing discipline function
nvme-fabrics: decode host pathing error for connect
nvme-fc: short-circuit reconnect retries
nvme: fix potential memory leaks in nvme_cdev_add
…it/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq scsi: vmw_pvscsi: Set correct residual data length scsi: bnx2fc: Return failure if io_req is already in ABTS processing scsi: aic7xxx: Remove multiple definition of globals scsi: aic7xxx: Restore several defines for aic7xxx firmware build scsi: target: iblock: Fix smp_processor_id() BUG messages scsi: libsas: Use _safe() loop in sas_resume_port() scsi: target: tcmu: Fix xarray RCU warning scsi: target: core: Avoid smp_processor_id() in preemptible code
PIC interrupts do not support affinity setting and they can end up on any online CPU. Therefore, it's required to mark the associated vectors as system-wide reserved. Otherwise, the corresponding irq descriptors are copied to the secondary CPUs but the vectors are not marked as assigned or reserved. This works correctly for the IO/APIC case. When the IO/APIC is disabled via config, kernel command line or lack of enumeration then all legacy interrupts are routed through the PIC, but nothing marks them as system-wide reserved vectors. As a consequence, a subsequent allocation on a secondary CPU can result in allocating one of these vectors, which triggers the BUG() in apic_update_vector() because the interrupt descriptor slot is not empty. Imran tried to work around that by marking those interrupts as allocated when a CPU comes online. But that's wrong in case that the IO/APIC is available and one of the legacy interrupts, e.g. IRQ0, has been switched to PIC mode because then marking them as allocated will fail as they are already marked as system vectors. Stay consistent and update the legacy vectors after attempting IO/APIC initialization and mark them as system vectors in case that no IO/APIC is available. Fixes: 69cde00 ("x86/vector: Use matrix allocator for vector assignment") Reported-by: Imran Khan <imran.f.khan@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210519233928.2157496-1-imran.f.khan@oracle.com
vm_create allocates memory and maps it close to GPA. This memory is separate from what is allocated in subsequent calls to vm_userspace_mem_region_add, so it is incorrect to pass the test memory size to vm_create_default. Just pass a small fixed amount of memory which can be used later for page table, otherwise GPAs are already allocated at MEM_GPA and the test aborts. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
…git/s390/linux Pull s390 fixes from Vasily Gorbik: "Fix races in vfio-ccw request handling" * tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: vfio-ccw: Serialize FSM IDLE state with I/O completion vfio-ccw: Reset FSM state to IDLE inside FSM vfio-ccw: Check initialized flag in cp_init()
Pull KVM fixes from Paolo Bonzini:
"ARM fixes:
- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs
- Fix regression with irqbypass not restarting the guest on failed
connect
- Fix regression with debug register decoding resulting in
overlapping access
- Commit exception state on exit to usrspace
- Fix the MMU notifier return values
- Add missing 'static' qualifiers in the new host stage-2 code
x86 fixes:
- fix guest missed wakeup with assigned devices
- fix WARN reported by syzkaller
- do not use BIT() in UAPI headers
- make the kvm_amd.avic parameter bool
PPC fixes:
- make halt polling heuristics consistent with other architectures
selftests:
- various fixes
- new performance selftest memslot_perf_test
- test UFFD minor faults in demand_paging_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
KVM: x86/mmu: Fix comment mentioning skip_4k
KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
KVM: x86: add start_assignment hook to kvm_x86_ops
KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
selftests: kvm: do only 1 memslot_perf_test run by default
KVM: X86: Use _BITUL() macro in UAPI headers
KVM: selftests: add shared hugetlbfs backing source type
KVM: selftests: allow using UFFD minor faults for demand paging
KVM: selftests: create alias mappings when using shared memory
KVM: selftests: add shmem backing source type
KVM: selftests: refactor vm_mem_backing_src_type flags
KVM: selftests: allow different backing source types
KVM: selftests: compute correct demand paging size
KVM: selftests: simplify setup_demand_paging error handling
KVM: selftests: Print a message if /dev/kvm is missing
...
…/git/gregkh/usb Pull USB / Thunderbolt fixes from Greg KH: "Here are a number of tiny USB and Thunderbolt driver fixes for 5.13-rc4. They consist of: - thunderbolt fixes for some NVM bound issues - xhci fixes for reported problems - control-request fixups - documentation build warning fixes - new usb-serial driver device ids - typec bugfixes for reported issues - usbfs warning fixups (could be triggered from userspace) - other tiny fixes for reported problems. All of these have been in linux-next with no reported issues" * tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall xhci: fix giving back URB with incorrect status regression in 5.12 usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen() usb: typec: tcpm: Respond Not_Supported if no snk_vdo usb: typec: tcpm: Properly interrupt VDM AMS USB: trancevibrator: fix control-request direction usb: Restore the usb_header label usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header usb: typec: ucsi: Clear pending after acking connector change usb: typec: mux: Fix matching with typec_altmode_desc misc/uss720: fix memory leak in uss720_probe usb: dwc3: gadget: Properly track pending and queued SG USB: usbfs: Don't WARN about excessively large memory allocations thunderbolt: usb4: Fix NVM read buffer bounds and offset issue thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue usb: chipidea: udc: assign interrupt number to USB gadget structure usb: cdnsp: Fix lack of removing request from pending list. usb: cdns3: Fix runtime PM imbalance on error USB: serial: pl2303: add device id for ADLINK ND-6530 GC USB: serial: ti_usb_3410_5052: add startech.com device id ...
…/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
drivers for 5.13-rc4.
They consist of:
- 8250 bugfixes and new device support
- lockdown security mode fixup
- syzbot found problems fixed
- 8250_omap fix for interrupt storm
- revert of 8250_omap driver fix as it caused worse problem than the
original issue
All but the last patch have been in linux-next for a while, the last
one is a revert of a problem found in linux-next with the 8250_omap
driver change"
* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
serial: 8250_pci: handle FL_NOIRQ board flag
serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
serial: 8250_pci: Add support for new HPE serial device
serial: 8250: 8250_omap: Fix possible interrupt storm
serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
serial: 8250_dw: Add device HID for new AMD UART controller
serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
serial: core: fix suspicious security_locked_down() call
serial: tegra: Fix a mask operation that is always true
…rnel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for reported issues for 5.13-rc4. Nothing major here, tiny changes for reported problems, full details are in the shortlog if people are curious. All have been in linux-next for a while with no reported problems" * tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: adc: ad7793: Add missing error code in ad7793_setup() iio: adc: ad7923: Fix undersized rx buffer. iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp() iio: dac: ad5770r: Put fwnode in error case during ->probe() iio: gyro: fxas21002c: balance runtime power in error path staging: emxx_udc: fix loop in _nbu2ss_nuke() staging: iio: cdc: ad7746: avoid overwrite of num_channels iio: adc: ad7192: handle regulator voltage error first iio: adc: ad7192: Avoid disabling a clock that was never enabled. iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.
…x/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three small driver core / debugfs fixes for 5.13-rc4: - debugfs fix for incorrect "lockdown" mode for selinux accesses - two device link changes, one bugfix and one cleanup All of these have been in linux-next for over a week with no reported problems" * tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers: base: Reduce device link removal code duplication drivers: base: Fix device link removal debugfs: fix security_locked_down() call for SELinux
…kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some tiny char/misc driver fixes for 5.13-rc4. Nothing huge here, just some tiny fixes for reported issues: - two interconnect driver fixes - kgdb build warning fix for gcc-11 - hgafb regression fix - soundwire driver fix - mei driver fix All have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: request autosuspend after sending rx flow control kgdb: fix gcc-11 warnings harder video: hgafb: correctly handle card detect failure during probe soundwire: qcom: fix handling of qcom,ports-block-pack-mode interconnect: qcom: Add missing MODULE_DEVICE_TABLE interconnect: qcom: bcm-voter: add a missing of_node_put()
…ernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix uninitialized error code value for the SPMI adc driver (Yang Yingliang) - Fix kernel doc warning (Yang Li) - Fix wrong read-write thermal trip point initialization (Srinivas Pandruvada) * tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data() thermal/ti-soc-thermal: Fix kernel-doc thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID
This refactors the user notification code to have a do / while loop around the completion condition. This has a small change in semantic, in that previously we ignored addfd calls upon wakeup if the notification had been responded to, but instead with the new change we check for an outstanding addfd calls prior to returning to userspace. Rodrigo Campos also identified a bug that can result in addfd causing an early return, when the supervisor didn't actually handle the syscall [1]. [1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/ Fixes: 7cf97b1 ("seccomp: Introduce addfd ioctl to seccomp user notifier") Signed-off-by: Sargun Dhillon <sargun@sargun.me> Acked-by: Tycho Andersen <tycho@tycho.pizza> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Kees Cook <keescook@chromium.org> Tested-by: Rodrigo Campos <rodrigo@kinvolk.io> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me
lld does not implement the RISCV relaxation optimizations like GNU ld therefore disable it when building with lld, Also pass it to assembler when using external GNU assembler ( LLVM_IAS != 1 ), this ensures that relevant assembler option is also enabled along. if these options are not used then we see following relocations in objects 0000000000000000 R_RISCV_ALIGN *ABS*+0x0000000000000002 These are then rejected by lld ld.lld: error: capability.c:(.fixup+0x0): relocation R_RISCV_ALIGN requires unimplemented linker relaxation; recompile with -mno-relax but the .o is already compiled with -mno-relax Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
As Andres reports "... io_sqe_buffer_register() doesn't initialize imu. io_buffer_account_pin() does imu->acct_pages++, before calling io_account_mem(ctx, imu->acct_pages).", leading to evevntual -ENOMEM. Initialise the field. Reported-by: Andres Freund <andres@anarazel.de> Fixes: 41edf1a ("io_uring: keep table of pointers to ubufs") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/438a6f46739ae5e05d9c75a0c8fa235320ff367c.1622285901.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
…fs-linux
Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
size hints interact with realtime volumes, fixes some failures in
online shrink, and fixes a problem where directory and symlink
shrinking on extremely fragmented filesystems could fail.
The most user-notable change here is to point users at our (new) IRC
channel on OFTC. Freedom isn't free, it costs folks like you and me;
and if you don't kowtow, they'll expel everyone and take over your
channel. (Ok, ok, that didn't fit the song lyrics...)
Summary:
- Fix a bug where unmapping operations end earlier than expected,
which can cause chaos on multi-block directory and symlink shrink
operations.
- Fix an erroneous assert that can trigger if we try to transition a
bmap structure from btree format to extents format with zero
extents. This was exposed by xfs/538"
* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: bunmapi has unnecessary AG lock ordering issues
xfs: btree format inode forks can have zero extents
xfs: add new IRC channel to MAINTAINERS
xfs: validate extsz hints against rt extent size when rtinherit is set
xfs: standardize extent size hint validation
xfs: check free AG space when making per-AG reservations
…linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of RISC-V related fixes:
- avoid errors when the stack tracing code is tracing itself.
- resurrect the memtest= kernel command line argument on RISC-V,
which was briefly enabled during the merge window before a
refactoring disabled it.
- build fix and some warning cleanups"
* tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: kexec: Fix W=1 build warnings
riscv: kprobes: Fix build error when MMU=n
riscv: Select ARCH_USE_MEMTEST
riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
While doing error injection testing I got the following panic kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ Rust-for-Linux#305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().
Test commands:
ip netns del A
ip netns del B
ip netns add A
ip netns add B
ip link add veth0 type veth peer name veth1
ip link set veth0 netns A
ip link set veth1 netns B
ip netns exec A ip link set lo up
ip netns exec A ip link set veth0 up
ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
ip netns exec B ip link set lo up
ip netns exec B ip link set veth1 up
ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
for i in {1..99}
do
let A=$i-1
ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
ip netns exec A ip link set ip6gre$i up
ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
ip netns exec B ip link set ip6gre$i up
done
Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ Rust-for-Linux#891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS: 0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
skb_put.cold.104+0x22/0x22
ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
? rcu_read_lock_sched_held+0x91/0xc0
mld_newpack+0x398/0x8f0
? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
? lock_contended+0xc40/0xc40
add_grhead.isra.33+0x280/0x380
add_grec+0x5ca/0xff0
? mld_sendpack+0xf40/0xf40
? lock_downgrade+0x690/0x690
mld_send_initial_cr.part.34+0xb9/0x180
ipv6_mc_dad_complete+0x15d/0x1b0
addrconf_dad_completed+0x8d2/0xbb0
? lock_downgrade+0x690/0x690
? addrconf_rs_timer+0x660/0x660
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
Allowing high order page allocation could fix this problem.
Fixes: 72e09ad ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
…complete Currently, the netdevice is registered before client initializing complete. So there is a timewindow between netdevice available and usable. In this case, if user try to change the channel number or ring param, it may cause the hns3_set_rx_cpu_rmap() being called twice, and report bug. [47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0 [47199.430340] hns3 0000:35:00.0 eth1: already uninitialized [47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1 [47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1 [47200.163524] ------------[ cut here ]------------ [47200.171674] kernel BUG at lib/cpu_rmap.c:142! [47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge] [47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G O 5.11.0-rc3+ #1 [47200.215601] Hardware name: , xxxxxx 02/04/2021 [47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [47200.230188] pc : cpu_rmap_add+0x38/0x40 [47200.237472] lr : irq_cpu_rmap_add+0x84/0x140 [47200.243291] sp : ffff800010e93a30 [47200.247295] x29: ffff800010e93a30 x28: ffff082100584880 [47200.254155] x27: 0000000000000000 x26: 0000000000000000 [47200.260712] x25: 0000000000000000 x24: 0000000000000004 [47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0 [47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680 [47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0 [47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0 [47200.293456] x15: fffffc2082990600 x14: dead000000000122 [47200.300059] x13: ffffffffffffffff x12: 000000000000003e [47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000 [47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700 [47200.319682] x7 : 0000000000000000 x6 : 000000000000003f [47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20 [47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80 [47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004 [47200.346058] Call trace: [47200.349324] cpu_rmap_add+0x38/0x40 [47200.354300] hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3] [47200.362294] hns3_reset_notify_init_enet+0x1cc/0x340 [hns3] [47200.370049] hns3_change_channels+0x40/0xb0 [hns3] [47200.376770] hns3_set_channels+0x12c/0x2a0 [hns3] [47200.383353] ethtool_set_channels+0x140/0x250 [47200.389772] dev_ethtool+0x714/0x23d0 [47200.394440] dev_ioctl+0x4cc/0x640 [47200.399277] sock_do_ioctl+0x100/0x2a0 [47200.404574] sock_ioctl+0x28c/0x470 [47200.409079] __arm64_sys_ioctl+0xb4/0x100 [47200.415217] el0_svc_common.constprop.0+0x84/0x210 [47200.422088] do_el0_svc+0x28/0x34 [47200.426387] el0_svc+0x28/0x70 [47200.431308] el0_sync_handler+0x1a4/0x1b0 [47200.436477] el0_sync+0x174/0x180 [47200.441562] Code: 11000405 79000c45 f824786 d65f03c0 (d4210000) [47200.448869] ---[ end trace a01efe4ce42e5f34 ]--- The process is like below: excuting hns3_client_init | register_netdev() | hns3_set_channels() | | hns3_set_rx_cpu_rmap() hns3_reset_notify_uninit_enet() | | | quit without calling function | hns3_free_rx_cpu_rmap for flag | HNS3_NIC_STATE_INITED is unset. | | | hns3_reset_notify_init_enet() | | set HNS3_NIC_STATE_INITED call hns3_set_rx_cpu_rmap()-- crash Fix it by calling register_netdev() at the end of function hns3_client_init(). Fixes: 08a1006 ("net: hns3: re-organize vector handle") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log: [ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer [ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario: [ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK *** [ 806.333747] May be due to missing lock nesting notation [ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu] Signed-off-by: Lang Yu <Lang.Yu@amd.com> Acked-by: Christian KÃnig <christian.koenig@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
When calling the 'ql_sem_spinlock', the driver has already acquired the
spin lock, so the driver should not call 'ssleep' in atomic context.
This bug can be fixed by using 'mdelay' instead of 'ssleep'.
The KASAN's log reveals it:
[ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002
[ 3.238748 ] 2 locks held by swapper/0/1:
[ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock+0x41/0x60
[ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at:
ql3xxx_probe+0x2aa/0xea0
[ 3.240873 ] Modules linked in:
[ 3.241187 ] irq event stamp: 460854
[ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>]
_raw_spin_unlock_irqrestore+0x4f/0x70
[ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>]
_raw_spin_lock_irqsave+0x2a/0x70
[ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>]
__do_softirq+0x2e4/0x4b1
[ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>]
irq_exit_rcu+0x100/0x110
[ 3.242245 ] Preemption disabled at:
[ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] Kernel panic - not syncing: scheduling while atomic
[ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted
5.13.0-rc1-00145
-gee7dc339169-dirty Rust-for-Linux#16
[ 3.242245 ] Call Trace:
[ 3.242245 ] dump_stack+0xba/0xf5
[ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0
[ 3.242245 ] panic+0x15a/0x3f2
[ 3.242245 ] ? vprintk+0x76/0x150
[ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0
[ 3.242245 ] __schedule_bug+0xae/0xe0
[ 3.242245 ] __schedule+0x72e/0xa00
[ 3.242245 ] schedule+0x43/0xf0
[ 3.242245 ] schedule_timeout+0x28b/0x500
[ 3.242245 ] ? del_timer_sync+0xf0/0xf0
[ 3.242245 ] ? msleep+0x2f/0x70
[ 3.242245 ] msleep+0x59/0x70
[ 3.242245 ] ql3xxx_probe+0x307/0xea0
[ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70
[ 3.242245 ] ? pci_device_remove+0x110/0x110
[ 3.242245 ] local_pci_probe+0x45/0xa0
[ 3.242245 ] pci_device_probe+0x12b/0x1d0
[ 3.242245 ] really_probe+0x2a9/0x610
[ 3.242245 ] driver_probe_device+0x90/0x1d0
[ 3.242245 ] ? mutex_lock_nested+0x1b/0x20
[ 3.242245 ] device_driver_attach+0x68/0x70
[ 3.242245 ] __driver_attach+0x124/0x1b0
[ 3.242245 ] ? device_driver_attach+0x70/0x70
[ 3.242245 ] bus_for_each_dev+0xbb/0x110
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] driver_attach+0x27/0x30
[ 3.242245 ] bus_add_driver+0x1eb/0x2a0
[ 3.242245 ] driver_register+0xa9/0x180
[ 3.242245 ] __pci_register_driver+0x82/0x90
[ 3.242245 ] ? yellowfin_init+0x25/0x25
[ 3.242245 ] ql3xxx_driver_init+0x23/0x25
[ 3.242245 ] do_one_initcall+0x7f/0x3d0
[ 3.242245 ] ? rdinit_setup+0x45/0x45
[ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80
[ 3.242245 ] kernel_init_freeable+0x2aa/0x301
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] kernel_init+0x18/0x190
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ? rest_init+0x2c0/0x2c0
[ 3.242245 ] ret_from_fork+0x1f/0x30
[ 3.242245 ] Dumping ftrace buffer:
[ 3.242245 ] (ftrace buffer empty)
[ 3.242245 ] Kernel Offset: disabled
[ 3.242245 ] Rebooting in 1 seconds.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty Rust-for-Linux#45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty Rust-for-Linux#45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 </IRQ> RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000010 ---[ end trace 11804dbb55cb1a64 ]--- RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
Commit f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE") introduced xas_next() calls to iterate xarray elements. These calls triggered the WARNING "suspicious RCU usage" at tcmu device set up [1]. In the call stack of xas_next(), xas_load() was called. According to its comment, this function requires "the xa_lock or the RCU lock". To avoid the warning: - Guard the small loop calling xas_next() in tcmu_get_empty_block with RCU lock. - In the large loop in tcmu_copy_data using RCU lock would possibly disable preemtion for a long time (copy multi MBs). Therefore replace XA_STATE, xas_set and xas_next with a single xa_load. [1] [ 1899.867091] ============================= [ 1899.871199] WARNING: suspicious RCU usage [ 1899.875310] 5.13.0-rc1+ Rust-for-Linux#41 Not tainted [ 1899.879222] ----------------------------- [ 1899.883299] include/linux/xarray.h:1182 suspicious rcu_dereference_check() usage! [ 1899.890940] other info that might help us debug this: [ 1899.899082] rcu_scheduler_active = 2, debug_locks = 1 [ 1899.905719] 3 locks held by kworker/0:1/1368: [ 1899.910161] #0: ffffa1f8c8b98738 ((wq_completion)target_submission){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580 [ 1899.920732] #1: ffffbd7040cd7e78 ((work_completion)(&q->sq.work)){+.+.}-{0:0}, at: process_one_work+0x1ee/0x580 [ 1899.931146] #2: ffffa1f8d1c99768 (&udev->cmdr_lock){+.+.}-{3:3}, at: tcmu_queue_cmd+0xea/0x160 [target_core_user] [ 1899.941678] stack backtrace: [ 1899.946093] CPU: 0 PID: 1368 Comm: kworker/0:1 Not tainted 5.13.0-rc1+ Rust-for-Linux#41 [ 1899.953070] Hardware name: System manufacturer System Product Name/PRIME Z270-A, BIOS 1302 03/15/2018 [ 1899.962459] Workqueue: target_submission target_queued_submit_work [target_core_mod] [ 1899.970337] Call Trace: [ 1899.972839] dump_stack+0x6d/0x89 [ 1899.976222] xas_descend+0x10e/0x120 [ 1899.979875] xas_load+0x39/0x50 [ 1899.983077] tcmu_get_empty_blocks+0x115/0x1c0 [target_core_user] [ 1899.989318] queue_cmd_ring+0x1da/0x630 [target_core_user] [ 1899.994897] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1899.999695] ? trace_kmalloc+0xa6/0xd0 [ 1900.003501] ? __kmalloc+0x205/0x380 [ 1900.007167] tcmu_queue_cmd+0x12f/0x160 [target_core_user] [ 1900.012746] __target_execute_cmd+0x23/0xa0 [target_core_mod] [ 1900.018589] transport_generic_new_cmd+0x1f3/0x370 [target_core_mod] [ 1900.025046] transport_handle_cdb_direct+0x34/0x50 [target_core_mod] [ 1900.031517] target_queued_submit_work+0x43/0xe0 [target_core_mod] [ 1900.037837] process_one_work+0x268/0x580 [ 1900.041952] ? process_one_work+0x580/0x580 [ 1900.046195] worker_thread+0x55/0x3b0 [ 1900.049921] ? process_one_work+0x580/0x580 [ 1900.054192] kthread+0x143/0x160 [ 1900.057499] ? kthread_create_worker_on_cpu+0x40/0x40 [ 1900.062661] ret_from_fork+0x1f/0x30 Link: https://lore.kernel.org/r/20210519135440.26773-1-bostroesser@gmail.com Fixes: f5ce815 ("scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZE") Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
[BUG] When running btrfs/027 with "-o compress" mount option, it always crashes with the following call trace: BTRFS critical (device dm-4): mapping failed logical 298901504 bio len 12288 len 8192 ------------[ cut here ]------------ kernel BUG at fs/btrfs/volumes.c:6651! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 31089 Comm: kworker/u24:10 Tainted: G OE 5.13.0-rc2-custom+ Rust-for-Linux#26 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-delalloc btrfs_work_helper [btrfs] RIP: 0010:btrfs_map_bio.cold+0x58/0x5a [btrfs] Call Trace: btrfs_submit_compressed_write+0x2d7/0x470 [btrfs] submit_compressed_extents+0x3b0/0x470 [btrfs] ? mark_held_locks+0x49/0x70 btrfs_work_helper+0x131/0x3e0 [btrfs] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 ? process_one_work+0x5d0/0x5d0 kthread+0x141/0x160 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 ---[ end trace 63113a3a91f34e68 ]--- [CAUSE] The critical message before the crash means we have a bio at logical bytenr 298901504 length 12288, but only 8192 bytes can fit into one stripe, the remaining 4096 bytes go to another stripe. In btrfs, all bios are properly split to avoid cross stripe boundary, but commit 764c7c9 ("btrfs: zoned: fix parallel compressed writes") changed the behavior for compressed writes. Previously if we find our new page can't be fitted into current stripe, ie. "submit == 1" case, we submit current bio without adding current page. submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0); page->mapping = NULL; if (submit || bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { But after the modification, we will add the page no matter if it crosses stripe boundary, leading to the above crash. submit = btrfs_bio_fits_in_stripe(page, PAGE_SIZE, bio, 0); if (pg_index == 0 && use_append) len = bio_add_zone_append_page(bio, page, PAGE_SIZE, 0); else len = bio_add_page(bio, page, PAGE_SIZE, 0); page->mapping = NULL; if (submit || len < PAGE_SIZE) { [FIX] It's no longer possible to revert to the original code style as we have two different bio_add_*_page() calls now. The new fix is to skip the bio_add_*_page() call if @submit is true. Also to avoid @len to be uninitialized, always initialize it to zero. If @submit is true, @len will not be checked. If @submit is not true, @len will be the return value of bio_add_*_page() call. Either way, the behavior is still the same as the old code. Reported-by: Josef Bacik <josef@toxicpanda.com> Fixes: 764c7c9 ("btrfs: zoned: fix parallel compressed writes") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jun 14, 2021
…oc extents
When doing a series of partial writes to different ranges of preallocated
extents with transaction commits and fsyncs in between, we can end up with
a checksum items in a log tree. This causes an fsync to fail with -EIO and
abort the transaction, turning the filesystem to RO mode, when syncing the
log.
For this to happen, we need to have a full fsync of a file following one
or more fast fsyncs.
The following example reproduces the problem and explains how it happens:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
# Create our test file with 2 preallocated extents. Leave a 1M hole
# between them to ensure that we get two file extent items that will
# never be merged into a single one. The extents are contiguous on disk,
# which will later result in the checksums for their data to be merged
# into a single checksum item in the csums btree.
#
$ xfs_io -f \
-c "falloc 0 1M" \
-c "falloc 3M 3M" \
/mnt/foobar
# Now write to the second extent and leave only 1M of it as unwritten,
# which corresponds to the file range [4M, 5M[.
#
# Then fsync the file to flush delalloc and to clear full sync flag from
# the inode, so that a future fsync will use the fast code path.
#
# After the writeback triggered by the fsync we have 3 file extent items
# that point to the second extent we previously allocated:
#
# 1) One file extent item of type BTRFS_FILE_EXTENT_REG that covers the
# file range [3M, 4M[
#
# 2) One file extent item of type BTRFS_FILE_EXTENT_PREALLOC that covers
# the file range [4M, 5M[
#
# 3) One file extent item of type BTRFS_FILE_EXTENT_REG that covers the
# file range [5M, 6M[
#
# All these file extent items have a generation of 6, which is the ID of
# the transaction where they were created. The split of the original file
# extent item is done at btrfs_mark_extent_written() when ordered extents
# complete for the file ranges [3M, 4M[ and [5M, 6M[.
#
$ xfs_io -c "pwrite -S 0xab 3M 1M" \
-c "pwrite -S 0xef 5M 1M" \
-c "fsync" \
/mnt/foobar
# Commit the current transaction. This wipes out the log tree created by
# the previous fsync.
sync
# Now write to the unwritten range of the second extent we allocated,
# corresponding to the file range [4M, 5M[, and fsync the file, which
# triggers the fast fsync code path.
#
# The fast fsync code path sees that there is a new extent map covering
# the file range [4M, 5M[ and therefore it will log a checksum item
# covering the range [1M, 2M[ of the second extent we allocated.
#
# Also, after the fsync finishes we no longer have the 3 file extent
# items that pointed to 3 sections of the second extent we allocated.
# Instead we end up with a single file extent item pointing to the whole
# extent, with a type of BTRFS_FILE_EXTENT_REG and a generation of 7 (the
# current transaction ID). This is due to the file extent item merging we
# do when completing ordered extents into ranges that point to unwritten
# (preallocated) extents. This merging is done at
# btrfs_mark_extent_written().
#
$ xfs_io -c "pwrite -S 0xcd 4M 1M" \
-c "fsync" \
/mnt/foobar
# Now do some write to our file outside the range of the second extent
# that we allocated with fallocate() and truncate the file size from 6M
# down to 5M.
#
# The truncate operation sets the full sync runtime flag on the inode,
# forcing the next fsync to use the slow code path. It also changes the
# length of the second file extent item so that it represents the file
# range [3M, 5M[ and not the range [3M, 6M[ anymore.
#
# Finally fsync the file. Since this is a fsync that triggers the slow
# code path, it will remove all items associated to the inode from the
# log tree and then it will scan for file extent items in the
# fs/subvolume tree that have a generation matching the current
# transaction ID, which is 7. This means it will log 2 file extent
# items:
#
# 1) One for the first extent we allocated, covering the file range
# [0, 1M[
#
# 2) Another for the first 2M of the second extent we allocated,
# covering the file range [3M, 5M[
#
# When logging the first file extent item we log a single checksum item
# that has all the checksums for the entire extent.
#
# When logging the second file extent item, we also lookup for the
# checksums that are associated with the range [0, 2M[ of the second
# extent we allocated (file range [3M, 5M[), and then we log them with
# btrfs_csum_file_blocks(). However that results in ending up with a log
# that has two checksum items with ranges that overlap:
#
# 1) One for the range [1M, 2M[ of the second extent we allocated,
# corresponding to the file range [4M, 5M[, which we logged in the
# previous fsync that used the fast code path;
#
# 2) One for the ranges [0, 1M[ and [0, 2M[ of the first and second
# extents, respectively, corresponding to the files ranges [0, 1M[
# and [3M, 5M[. This one was added during this last fsync that uses
# the slow code path and overlaps with the previous one logged by
# the previous fast fsync.
#
# This happens because when logging the checksums for the second
# extent, we notice they start at an offset that matches the end of the
# checksums item that we logged for the first extent, and because both
# extents are contiguous on disk, btrfs_csum_file_blocks() decides to
# extend that existing checksums item and append the checksums for the
# second extent to this item. The end result is we end up with two
# checksum items in the log tree that have overlapping ranges, as
# listed before, resulting in the fsync to fail with -EIO and aborting
# the transaction, turning the filesystem into RO mode.
#
$ xfs_io -c "pwrite -S 0xff 0 1M" \
-c "truncate 5M" \
-c "fsync" \
/mnt/foobar
fsync: Input/output error
After running the example, dmesg/syslog shows the tree checker complained
about the checksum items with overlapping ranges and we aborted the
transaction:
$ dmesg
(...)
[756289.557487] BTRFS critical (device sdc): corrupt leaf: root=18446744073709551610 block=30720000 slot=5, csum end range (16777216) goes beyond the start range (15728640) of the next csum item
[756289.560583] BTRFS info (device sdc): leaf 30720000 gen 7 total ptrs 7 free space 11677 owner 18446744073709551610
[756289.562435] BTRFS info (device sdc): refs 2 lock_owner 0 current 2303929
[756289.563654] item 0 key (257 1 0) itemoff 16123 itemsize 160
[756289.564649] inode generation 6 size 5242880 mode 100600
[756289.565636] item 1 key (257 12 256) itemoff 16107 itemsize 16
[756289.566694] item 2 key (257 108 0) itemoff 16054 itemsize 53
[756289.567725] extent data disk bytenr 13631488 nr 1048576
[756289.568697] extent data offset 0 nr 1048576 ram 1048576
[756289.569689] item 3 key (257 108 1048576) itemoff 16001 itemsize 53
[756289.570682] extent data disk bytenr 0 nr 0
[756289.571363] extent data offset 0 nr 2097152 ram 2097152
[756289.572213] item 4 key (257 108 3145728) itemoff 15948 itemsize 53
[756289.573246] extent data disk bytenr 14680064 nr 3145728
[756289.574121] extent data offset 0 nr 2097152 ram 3145728
[756289.574993] item 5 key (18446744073709551606 128 13631488) itemoff 12876 itemsize 3072
[756289.576113] item 6 key (18446744073709551606 128 15728640) itemoff 11852 itemsize 1024
[756289.577286] BTRFS error (device sdc): block=30720000 write time tree block corruption detected
[756289.578644] ------------[ cut here ]------------
[756289.579376] WARNING: CPU: 0 PID: 2303929 at fs/btrfs/disk-io.c:465 csum_one_extent_buffer+0xed/0x100 [btrfs]
[756289.580857] Modules linked in: btrfs dm_zero dm_dust loop dm_snapshot (...)
[756289.591534] CPU: 0 PID: 2303929 Comm: xfs_io Tainted: G W 5.12.0-rc8-btrfs-next-87 #1
[756289.592580] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[756289.594161] RIP: 0010:csum_one_extent_buffer+0xed/0x100 [btrfs]
[756289.595122] Code: 5d c3 e8 76 60 (...)
[756289.597509] RSP: 0018:ffffb51b416cb898 EFLAGS: 00010282
[756289.598142] RAX: 0000000000000000 RBX: fffff02b8a365bc0 RCX: 0000000000000000
[756289.598970] RDX: 0000000000000000 RSI: ffffffffa9112421 RDI: 00000000ffffffff
[756289.599798] RBP: ffffa06500880000 R08: 0000000000000000 R09: 0000000000000000
[756289.600619] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[756289.601456] R13: ffffa0652b1d8980 R14: ffffa06500880000 R15: 0000000000000000
[756289.602278] FS: 00007f08b23c9800(0000) GS:ffffa0682be00000(0000) knlGS:0000000000000000
[756289.603217] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[756289.603892] CR2: 00005652f32d0138 CR3: 000000025d616003 CR4: 0000000000370ef0
[756289.604725] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[756289.605563] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[756289.606400] Call Trace:
[756289.606704] btree_csum_one_bio+0x244/0x2b0 [btrfs]
[756289.607313] btrfs_submit_metadata_bio+0xb7/0x100 [btrfs]
[756289.608040] submit_one_bio+0x61/0x70 [btrfs]
[756289.608587] btree_write_cache_pages+0x587/0x610 [btrfs]
[756289.609258] ? free_debug_processing+0x1d5/0x240
[756289.609812] ? __module_address+0x28/0xf0
[756289.610298] ? lock_acquire+0x1a0/0x3e0
[756289.610754] ? lock_acquired+0x19f/0x430
[756289.611220] ? lock_acquire+0x1a0/0x3e0
[756289.611675] do_writepages+0x43/0xf0
[756289.612101] ? __filemap_fdatawrite_range+0xa4/0x100
[756289.612800] __filemap_fdatawrite_range+0xc5/0x100
[756289.613393] btrfs_write_marked_extents+0x68/0x160 [btrfs]
[756289.614085] btrfs_sync_log+0x21c/0xf20 [btrfs]
[756289.614661] ? finish_wait+0x90/0x90
[756289.615096] ? __mutex_unlock_slowpath+0x45/0x2a0
[756289.615661] ? btrfs_log_inode_parent+0x3c9/0xdc0 [btrfs]
[756289.616338] ? lock_acquire+0x1a0/0x3e0
[756289.616801] ? lock_acquired+0x19f/0x430
[756289.617284] ? lock_acquire+0x1a0/0x3e0
[756289.617750] ? lock_release+0x214/0x470
[756289.618221] ? lock_acquired+0x19f/0x430
[756289.618704] ? dput+0x20/0x4a0
[756289.619079] ? dput+0x20/0x4a0
[756289.619452] ? lockref_put_or_lock+0x9/0x30
[756289.619969] ? lock_release+0x214/0x470
[756289.620445] ? lock_release+0x214/0x470
[756289.620924] ? lock_release+0x214/0x470
[756289.621415] btrfs_sync_file+0x46a/0x5b0 [btrfs]
[756289.621982] do_fsync+0x38/0x70
[756289.622395] __x64_sys_fsync+0x10/0x20
[756289.622907] do_syscall_64+0x33/0x80
[756289.623438] entry_SYSCALL_64_after_hwframe+0x44/0xae
[756289.624063] RIP: 0033:0x7f08b27fbb7b
[756289.624588] Code: 0f 05 48 3d 00 (...)
[756289.626760] RSP: 002b:00007ffe2583f940 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[756289.627639] RAX: ffffffffffffffda RBX: 00005652f32cd0f0 RCX: 00007f08b27fbb7b
[756289.628464] RDX: 00005652f32cbca0 RSI: 00005652f32cd110 RDI: 0000000000000003
[756289.629323] RBP: 00005652f32cd110 R08: 0000000000000000 R09: 00007f08b28c4be0
[756289.630172] R10: fffffffffffff39a R11: 0000000000000293 R12: 0000000000000001
[756289.631007] R13: 00005652f32cd0f0 R14: 0000000000000001 R15: 00005652f32cc480
[756289.631819] irq event stamp: 0
[756289.632188] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[756289.632911] hardirqs last disabled at (0): [<ffffffffa7e97c29>] copy_process+0x879/0x1cc0
[756289.633893] softirqs last enabled at (0): [<ffffffffa7e97c29>] copy_process+0x879/0x1cc0
[756289.634871] softirqs last disabled at (0): [<0000000000000000>] 0x0
[756289.635606] ---[ end trace 0a039fdc16ff3fef ]---
[756289.636179] BTRFS: error (device sdc) in btrfs_sync_log:3136: errno=-5 IO failure
[756289.637082] BTRFS info (device sdc): forced readonly
Having checksum items covering ranges that overlap is dangerous as in some
cases it can lead to having extent ranges for which we miss checksums
after log replay or getting the wrong checksum item. There were some fixes
in the past for bugs that resulted in this problem, and were explained and
fixed by the following commits:
27b9a81 ("Btrfs: fix csum tree corruption, duplicate and outdated checksums")
b84b839 ("Btrfs: fix file read corruption after extent cloning and fsync")
40e046a ("Btrfs: fix missing data checksums after replaying a log tree")
e289f03 ("btrfs: fix corrupt log due to concurrent fsync of inodes with shared extents")
Fix the issue by making btrfs_csum_file_blocks() taking into account the
start offset of the next checksum item when it decides to extend an
existing checksum item, so that it never extends the checksum to end at a
range that goes beyond the start range of the next checksum item.
When we can not access the next checksum item without releasing the path,
simply drop the optimization of extending the previous checksum item and
fallback to inserting a new checksum item - this happens rarely and the
optimization is not significant enough for a log tree in order to justify
the extra complexity, as it would only save a few bytes (the size of a
struct btrfs_item) of leaf space.
This behaviour is only needed when inserting into a log tree because
for the regular checksums tree we never have a case where we try to
insert a range of checksums that overlap with a range that was previously
inserted.
A test case for fstests will follow soon.
Reported-by: Philipp Fent <fent@in.tum.de>
Link: https://lore.kernel.org/linux-btrfs/93c4600e-5263-5cba-adf0-6f47526e7561@in.tum.de/
CC: stable@vger.kernel.org # 5.4+
Tested-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Otherwise, when compiled as module, a WARN_ON is triggered: WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd] [...] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events deferred_probe_work_func [<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14) [<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104) [<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114) [<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4) [<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd]) [<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core]) [<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core]) [<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card]) [<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98) [...] Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210527163409.22049-1-nicolas.cavallari@green-communications.fr Signed-off-by: Mark Brown <broonie@kernel.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
After the commit 5ce2dce ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca85 ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns. Fixes: 5ce2dce ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces") Link: https://lore.kernel.org/r/20210525150134.139342-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
This reverts commit 568262b. The commit causes the following panic when shutting down a rockpro64-v2 board: [..] [ 41.684569] xhci-hcd xhci-hcd.2.auto: USB bus 1 deregistered [ 41.686301] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 41.687096] Mem abort info: [ 41.687345] ESR = 0x96000004 [ 41.687615] EC = 0x25: DABT (current EL), IL = 32 bits [ 41.688082] SET = 0, FnV = 0 [ 41.688352] EA = 0, S1PTW = 0 [ 41.688628] Data abort info: [ 41.688882] ISV = 0, ISS = 0x00000004 [ 41.689219] CM = 0, WnR = 0 [ 41.689481] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000073b2000 [ 41.690046] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [ 41.690654] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 41.691143] Modules linked in: [ 41.691416] CPU: 5 PID: 1 Comm: shutdown Not tainted 5.13.0-rc4 Rust-for-Linux#43 [ 41.691966] Hardware name: Pine64 RockPro64 v2.0 (DT) [ 41.692409] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 41.692937] pc : down_read_interruptible+0xec/0x200 [ 41.693373] lr : simple_recursive_removal+0x48/0x280 [ 41.693815] sp : ffff800011fab910 [ 41.694107] x29: ffff800011fab910 x28: ffff0000008fe480 x27: ffff0000008fe4d8 [ 41.694736] x26: ffff800011529a90 x25: 00000000000000a0 x24: ffff800011edd030 [ 41.695364] x23: 0000000000000080 x22: 0000000000000000 x21: ffff800011f23994 [ 41.695992] x20: ffff800011f23998 x19: ffff0000008fe480 x18: ffffffffffffffff [ 41.696620] x17: 000c0400bb44ffff x16: 0000000000000009 x15: ffff800091faba3d [ 41.697248] x14: 0000000000000004 x13: 0000000000000000 x12: 0000000000000020 [ 41.697875] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 6f6c746364716e62 [ 41.698502] x8 : 7f7f7f7f7f7f7f7f x7 : fefefeff6364626d x6 : 0000000000000440 [ 41.699130] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000000a0 [ 41.699758] x2 : 0000000000000001 x1 : 0000000000000000 x0 : 00000000000000a0 [ 41.700386] Call trace: [ 41.700602] down_read_interruptible+0xec/0x200 [ 41.701003] debugfs_remove+0x5c/0x80 [ 41.701328] dwc3_debugfs_exit+0x1c/0x6c [ 41.701676] dwc3_remove+0x34/0x1a0 [ 41.701988] platform_remove+0x28/0x60 [ 41.702322] __device_release_driver+0x188/0x22c [ 41.702730] device_release_driver+0x2c/0x44 [ 41.703106] bus_remove_device+0x124/0x130 [ 41.703468] device_del+0x16c/0x424 [ 41.703777] platform_device_del.part.0+0x1c/0x90 [ 41.704193] platform_device_unregister+0x28/0x44 [ 41.704608] of_platform_device_destroy+0xe8/0x100 [ 41.705031] device_for_each_child_reverse+0x64/0xb4 [ 41.705470] of_platform_depopulate+0x40/0x84 [ 41.705853] __dwc3_of_simple_teardown+0x20/0xd4 [ 41.706260] dwc3_of_simple_shutdown+0x14/0x20 [ 41.706652] platform_shutdown+0x28/0x40 [ 41.706998] device_shutdown+0x158/0x330 [ 41.707344] kernel_power_off+0x38/0x7c [ 41.707684] __do_sys_reboot+0x16c/0x2a0 [ 41.708029] __arm64_sys_reboot+0x28/0x34 [ 41.708383] invoke_syscall+0x48/0x114 [ 41.708716] el0_svc_common.constprop.0+0x44/0xdc [ 41.709131] do_el0_svc+0x28/0x90 [ 41.709426] el0_svc+0x2c/0x54 [ 41.709698] el0_sync_handler+0xa4/0x130 [ 41.710045] el0_sync+0x198/0x1c0 [ 41.710342] Code: c8047c62 35ffff84 17fffe5f f9800071 (c85ffc60) [ 41.710881] ---[ end trace 406377df5178f75c ]--- [ 41.711299] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 41.712084] Kernel Offset: disabled [ 41.712391] CPU features: 0x10001031,20000846 [ 41.712775] Memory Limit: none [ 41.713049] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- As Felipe explained: "dwc3_shutdown() is just called dwc3_remove() directly, then we end up calling debugfs_remove_recursive() twice." Reverting the commit fixes the panic. Fixes: 568262b ("usb: dwc3: core: Add shutdown callback for dwc3") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20210603151742.298243-1-alexandru.elisei@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
…r tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty Rust-for-Linux#36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 111.843729] cpu_startup_entry+0x2c/0x70 [ 111.847657] rest_init+0xdc/0xec [ 111.850890] arch_call_rest_init+0x14/0x20 [ 111.854988] start_kernel+0x508/0x540 [ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827) [ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]--- [ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 111.876258] SMP: stopping secondary CPUs [ 111.880185] Kernel Offset: disabled [ 111.883673] CPU features: 0x00001001,20000846 [ 111.888031] Memory Limit: none [ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Fixes: 3ed8e1c ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1622627829-11070-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Merge branch 'mlxsw-fixes' Ido Schimmel says: ==================== mlxsw: Thermal and qdisc fixes Patches #1-#2 fix wrong validation of burst size in qdisc code and a user triggerable WARN_ON(). Patch Rust-for-Linux#3 fixes a regression in thermal monitoring of transceiver modules and gearboxes. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Some drivers require memory that is marked as EFI boot services data. In order for this memory to not be re-used by the kernel after ExitBootServices(), efi_mem_reserve() is used to preserve it by inserting a new EFI memory descriptor and marking it with the EFI_MEMORY_RUNTIME attribute. Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to be mapped encrypted by Linux, otherwise the kernel might crash at boot like below: EFI Variables Facility v0.08 2004-May-17 general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:efi_mokvar_entry_next [...] Call Trace: efi_mokvar_sysfs_init ? efi_mokvar_table_init do_one_initcall ? __kmalloc kernel_init_freeable ? rest_init kernel_init ret_from_fork Expand the __ioremap_check_other() function to additionally check for this other type of boot data reserved at runtime and indicate that it should be mapped encrypted for an SEV guest. [ bp: Massage commit message. ] Fixes: 58c9090 ("efi: Support for MOK variable config table") Reported-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: <stable@vger.kernel.org> # 5.10+ Link: https://lkml.kernel.org/r/20210608095439.12668-2-joro@8bytes.org
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c04 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: b220c04 ("tracing: Check length before giving out the filter buffer") Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com> Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com> Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com> Tested-by: James Wang <jnwang@linux.alibaba.com> Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
The sinfo.pertid and sinfo.generation variables are not initialized and it causes a crash when we use this as a wireless access point. [ 456.873025] ------------[ cut here ]------------ [ 456.878198] kernel BUG at mm/slub.c:3968! [ 456.882680] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ snip ] [ 457.271004] Backtrace: [ 457.273733] [<c02b7ee4>] (kfree) from [<c0e2a470>] (nl80211_send_station+0x954/0xfc4) [ 457.282481] r9:eccca0c0 r8:e8edfec0 r7:00000000 r6:00000011 r5:e80a9480 r4:e8edfe00 [ 457.291132] [<c0e29b1c>] (nl80211_send_station) from [<c0e2b18c>] (cfg80211_new_sta+0x90/0x1cc) [ 457.300850] r10:e80a9480 r9:e8edfe00 r8:ea678cca r7:00000a20 r6:00000000 r5:ec46d000 [ 457.309586] r4:ec46d9e0 [ 457.312433] [<c0e2b0fc>] (cfg80211_new_sta) from [<bf086684>] (rtw_cfg80211_indicate_sta_assoc+0x80/0x9c [r8723bs]) [ 457.324095] r10:00009930 r9:e85b9d80 r8:bf091050 r7:00000000 r6:00000000 r5:0000001c [ 457.332831] r4:c1606788 [ 457.335692] [<bf086604>] (rtw_cfg80211_indicate_sta_assoc [r8723bs]) from [<bf03df38>] (rtw_stassoc_event_callback+0x1c8/0x1d4 [r8723bs]) [ 457.349489] r7:ea678cc0 r6:000000a1 r5:f1225f84 r4:f086b000 [ 457.355845] [<bf03dd70>] (rtw_stassoc_event_callback [r8723bs]) from [<bf048e4c>] (mlme_evt_hdl+0x8c/0xb4 [r8723bs]) [ 457.367601] r7:c1604900 r6:f086c4b8 r5:00000000 r4:f086c000 [ 457.373959] [<bf048dc0>] (mlme_evt_hdl [r8723bs]) from [<bf03693c>] (rtw_cmd_thread+0x198/0x3d8 [r8723bs]) [ 457.384744] r5:f086e000 r4:f086c000 [ 457.388754] [<bf0367a4>] (rtw_cmd_thread [r8723bs]) from [<c014a214>] (kthread+0x170/0x174) [ 457.398083] r10:ed7a57e8 r9:bf0367a4 r8:f086b000 r7:e8ede000 r6:00000000 r5:e9975200 [ 457.406828] r4:e8369900 [ 457.409653] [<c014a0a4>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 457.417718] Exception stack(0xe8edffb0 to 0xe8edfff8) [ 457.423356] ffa0: 00000000 00000000 00000000 00000000 [ 457.432492] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 457.441618] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 457.449006] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c014a0a4 [ 457.457750] r4:e9975200 [ 457.460574] Code: 1a000003 e5953004 e3130001 1a000000 (e7f001f2) [ 457.467381] ---[ end trace 4acbc8c15e9e6aa7 ]--- Link: https://forum.armbian.com/topic/14727-wifi-ap-kernel-bug-in-kernel-5444/ Fixes: 8689c05 ("cfg80211: dynamically allocate per-tid stats for station info") Fixes: f5ea912 ("nl80211: add generation number to all dumps") Signed-off-by: Wenli Looi <wlooi@ucalgary.ca> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608064620.74059-1-wlooi@ucalgary.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
When user space brings PKRU into init state, then the kernel handling is
broken:
T1 user space
xsave(state)
state.header.xfeatures &= ~XFEATURE_MASK_PKRU;
xrstor(state)
T1 -> kernel
schedule()
XSAVE(S) -> T1->xsave.header.xfeatures[PKRU] == 0
T1->flags |= TIF_NEED_FPU_LOAD;
wrpkru();
schedule()
...
pk = get_xsave_addr(&T1->fpu->state.xsave, XFEATURE_PKRU);
if (pk)
wrpkru(pk->pkru);
else
wrpkru(DEFAULT_PKRU);
Because the xfeatures bit is 0 and therefore the value in the xsave
storage is not valid, get_xsave_addr() returns NULL and switch_to()
writes the default PKRU. -> FAIL #1!
So that wrecks any copy_to/from_user() on the way back to user space
which hits memory which is protected by the default PKRU value.
Assumed that this does not fail (pure luck) then T1 goes back to user
space and because TIF_NEED_FPU_LOAD is set it ends up in
switch_fpu_return()
__fpregs_load_activate()
if (!fpregs_state_valid()) {
load_XSTATE_from_task();
}
But if nothing touched the FPU between T1 scheduling out and back in,
then the fpregs_state is still valid which means switch_fpu_return()
does nothing and just clears TIF_NEED_FPU_LOAD. Back to user space with
DEFAULT_PKRU loaded. -> FAIL #2!
The fix is simple: if get_xsave_addr() returns NULL then set the
PKRU value to 0 instead of the restrictive default PKRU value in
init_pkru_value.
[ bp: Massage in minor nitpicks from folks. ]
Fixes: 0cecca9 ("x86/fpu: Eager switch PKRU state")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144346.045616965@linutronix.de
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.001026] RIP: 0033:0x7f58bcfb22f7 [ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7 [ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003 [ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001 [ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d [ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700 [ 748.001564] irq event stamp: 0 [ 748.000787] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0 [ 748.001854] softirqs last enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0 [ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 748.001492] ---[ end trace a6fabd773d1c51ae ]--- Fix by destroying the send queue of a hairpin peer net device that is being removed/unbound, which returns the allocated ring buffer pages to the host. Fixes: 4d8fcf2 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
The value mr->sig is stored in the entry upon mr allocation, however, ibmr is wrongly entered here as "old", therefore, xa_cmpxchg() does not replace the entry with NULL, which leads to the following trace: WARNING: CPU: 28 PID: 2078 at drivers/infiniband/hw/mlx5/main.c:3643 mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Modules linked in: nvme_rdma nvme_fabrics nvme_core 8021q garp mrp bonding bridge stp llc rfkill rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_tad CPU: 28 PID: 2078 Comm: reboot Tainted: G X --------- --- 5.13.0-0.rc2.19.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.9.1 12/07/2018 RIP: 0010:mlx5_ib_stage_init_cleanup+0x4d/0x60 [mlx5_ib] Code: 8d bb 70 1f 00 00 be 00 01 00 00 e8 9d 94 ce da 48 3d 00 01 00 00 75 02 5b c3 0f 0b 5b c3 0f 0b 48 83 bb b0 20 00 00 00 74 d5 <0f> 0b eb d1 4 RSP: 0018:ffffa8db06d33c90 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff97f890a44000 RCX: ffff97f900ec0160 RDX: 0000000000000000 RSI: 0000000080080001 RDI: ffff97f890a44000 RBP: ffffffffc0c189b8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000300 R12: ffff97f890a44000 R13: ffffffffc0c36030 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f0d5a8a3b40(0000) GS:ffff98077fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555acbf4f450 CR3: 00000002a6f56002 CR4: 00000000001706e0 Call Trace: mlx5r_remove+0x39/0x60 [mlx5_ib] auxiliary_bus_remove+0x1b/0x30 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x3e0 mlx5_detach_device+0x59/0x90 [mlx5_core] mlx5_unload_one+0x22/0x60 [mlx5_core] shutdown+0x31/0x3a [mlx5_core] pci_device_shutdown+0x34/0x60 device_shutdown+0x15b/0x1c0 __do_sys_reboot.cold+0x2f/0x5b ? vfs_writev+0xc7/0x140 ? handle_mm_fault+0xc5/0x290 ? do_writev+0x6b/0x110 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: e6fb246 ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()") Link: https://lore.kernel.org/r/f3f585ea0db59c2a78f94f65eedeafc5a2374993.1623309971.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 Cc: stable@vger.kernel.org Reported-by: syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com Fixes: 9ec1949 ("KVM: x86: clear SMM flags before loading state while leaving SMM") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210609185619.992058-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 Rust-for-Linux#16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by: Changbin Du <changbin.du@gmail.com> Fixes: c62cce2 ("net: add an ioctl to get a socket network namespace") Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Christian Brauner <christian.brauner@ubuntu.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback. Link: https://lkml.kernel.org/r/20210604084705.3729204-1-yangerkun@huawei.com Fixes: 0bc1f8b ("hwpoison: fix the handling path of the victimized page frame that belong to non-LRU") Signed-off-by: yangerkun <yangerkun@huawei.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Jan Kara <jack@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
The device can be requested to be attached despite being not probed. This situation is possible if devlink reload races with module removal, and the following kernel panic is an outcome of such race. mlx5_core 0000:00:09.0: firmware version: 4.7.9999 mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link) BUG: unable to handle page fault for address: fffffffffffffff0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 3218067 P4D 3218067 PUD 321a067 PMD 0 Oops: 0000 [#1] SMP KASAN NOPTI CPU: 7 PID: 250 Comm: devlink Not tainted 5.12.0-rc2+ #2836 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_attach_device+0x80/0x280 [mlx5_core] Code: f8 48 c1 e8 03 42 80 3c 38 00 0f 85 80 01 00 00 48 8b 45 68 48 8d 78 f0 48 89 fe 48 c1 ee 03 42 80 3c 3e 00 0f 85 70 01 00 00 <48> 8b 40 f0 48 85 c0 74 0d 48 89 ef ff d0 85 c0 0f 85 84 05 0e 00 RSP: 0018:ffff8880129675f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff827407f1 RDX: 1ffff110011336cf RSI: 1ffffffffffffffe RDI: fffffffffffffff0 RBP: ffff888008e0c000 R08: 0000000000000008 R09: ffffffffa0662ee7 R10: fffffbfff40cc5dc R11: 0000000000000000 R12: ffff88800ea002e0 R13: ffffed1001d459f7 R14: ffffffffa05ef4f8 R15: dffffc0000000000 FS: 00007f51dfeaf740(0000) GS:ffff88806d5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffff0 CR3: 000000000bc82006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_load_one+0x117/0x1d0 [mlx5_core] devlink_reload+0x2d5/0x520 ? devlink_remote_reload_actions_performed+0x30/0x30 ? mutex_trylock+0x24b/0x2d0 ? devlink_nl_cmd_reload+0x62b/0x1070 devlink_nl_cmd_reload+0x66d/0x1070 ? devlink_reload+0x520/0x520 ? devlink_nl_pre_doit+0x64/0x4d0 genl_family_rcv_msg_doit+0x1e9/0x2f0 ? mutex_lock_io_nested+0x1130/0x1130 ? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240 ? security_capable+0x51/0x90 genl_rcv_msg+0x27f/0x4a0 ? genl_get_cmd+0x3c0/0x3c0 ? lock_acquire+0x1a9/0x6d0 ? devlink_reload+0x520/0x520 ? lock_release+0x6c0/0x6c0 netlink_rcv_skb+0x11d/0x340 ? genl_get_cmd+0x3c0/0x3c0 ? netlink_ack+0x9f0/0x9f0 ? lock_release+0x1f9/0x6c0 genl_rcv+0x24/0x40 netlink_unicast+0x433/0x700 ? netlink_attachskb+0x730/0x730 ? _copy_from_iter_full+0x178/0x650 ? __alloc_skb+0x113/0x2b0 netlink_sendmsg+0x6f1/0xbd0 ? netlink_unicast+0x700/0x700 ? netlink_unicast+0x700/0x700 sock_sendmsg+0xb0/0xe0 __sys_sendto+0x193/0x240 ? __x64_sys_getpeername+0xb0/0xb0 ? copy_page_range+0x2300/0x2300 ? __up_read+0x1a1/0x7b0 ? do_user_addr_fault+0x219/0xdc0 __x64_sys_sendto+0xdd/0x1b0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f51dffb514a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c RSP: 002b:00007ffcaef22e78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f51dffb514a RDX: 0000000000000030 RSI: 000055750daf2440 RDI: 0000000000000003 RBP: 000055750daf2410 R08: 00007f51e0081200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: mlx5_core(-) ptp pps_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [last unloaded: mlx5_ib] CR2: fffffffffffffff0 ---[ end trace 7789831bfe74fa42 ]--- Fixes: a925b5e ("net/mlx5: Register mlx5 devices to auxiliary virtual bus") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
…t set On systems without any specific PMU driver support registered, running perf record causes Oops. The relevant portion from call trace: BUG: Kernel NULL pointer dereference on read at 0x00000040 Faulting instruction address: 0xc0021f0c Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K PREEMPT CMPCPRO SAF3000 DIE NOTIFICATION CPU: 0 PID: 442 Comm: null_syscall Not tainted 5.13.0-rc6-s3k-dev-01645-g7649ee3d2957 #5164 NIP: c0021f0c LR: c00e8ad8 CTR: c00d8a5c NIP perf_instruction_pointer+0x10/0x60 LR perf_prepare_sample+0x344/0x674 Call Trace: perf_prepare_sample+0x7c/0x674 (unreliable) perf_event_output_forward+0x3c/0x94 __perf_event_overflow+0x74/0x14c perf_swevent_hrtimer+0xf8/0x170 __hrtimer_run_queues.constprop.0+0x160/0x318 hrtimer_interrupt+0x148/0x3b0 timer_interrupt+0xc4/0x22c Decrementer_virt+0xb8/0xbc During perf record session, perf_instruction_pointer() is called to capture the sample IP. This function in core-book3s accesses ppmu->flags. If a platform specific PMU driver is not registered, ppmu is set to NULL and accessing its members results in a crash. Fix this crash by checking if ppmu is set. Fixes: 2ca13a4 ("powerpc/perf: Use regs->nip when SIAR is zero") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1623952506-1431-1-git-send-email-atrajeev@linux.vnet.ibm.com
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
Andreas reported commit fc85047 ("riscv: bpf: Avoid breaking W^X") breaks booting with one kind of defconfig, I reproduced a kernel panic with the defconfig: [ 0.138553] Unable to handle kernel paging request at virtual address ffffffff81201220 [ 0.139159] Oops [#1] [ 0.139303] Modules linked in: [ 0.139601] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc5-default+ #1 [ 0.139934] Hardware name: riscv-virtio,qemu (DT) [ 0.140193] epc : __memset+0xc4/0xfc [ 0.140416] ra : skb_flow_dissector_init+0x1e/0x82 [ 0.140609] epc : ffffffff8029806c ra : ffffffff8033be78 sp : ffffffe001647da0 [ 0.140878] gp : ffffffff81134b08 tp : ffffffe001654380 t0 : ffffffff81201158 [ 0.141156] t1 : 0000000000000002 t2 : 0000000000000154 s0 : ffffffe001647dd0 [ 0.141424] s1 : ffffffff80a43250 a0 : ffffffff81201220 a1 : 0000000000000000 [ 0.141654] a2 : 000000000000003c a3 : ffffffff81201258 a4 : 0000000000000064 [ 0.141893] a5 : ffffffff8029806c a6 : 0000000000000040 a7 : ffffffffffffffff [ 0.142126] s2 : ffffffff81201220 s3 : 0000000000000009 s4 : ffffffff81135088 [ 0.142353] s5 : ffffffff81135038 s6 : ffffffff8080ce80 s7 : ffffffff80800438 [ 0.142584] s8 : ffffffff80bc6578 s9 : 0000000000000008 s10: ffffffff806000ac [ 0.142810] s11: 0000000000000000 t3 : fffffffffffffffc t4 : 0000000000000000 [ 0.143042] t5 : 0000000000000155 t6 : 00000000000003ff [ 0.143220] status: 0000000000000120 badaddr: ffffffff81201220 cause: 000000000000000f [ 0.143560] [<ffffffff8029806c>] __memset+0xc4/0xfc [ 0.143859] [<ffffffff8061e984>] init_default_flow_dissectors+0x22/0x60 [ 0.144092] [<ffffffff800010fc>] do_one_initcall+0x3e/0x168 [ 0.144278] [<ffffffff80600df0>] kernel_init_freeable+0x1c8/0x224 [ 0.144479] [<ffffffff804868a8>] kernel_init+0x12/0x110 [ 0.144658] [<ffffffff800022de>] ret_from_exception+0x0/0xc [ 0.145124] ---[ end trace f1e9643daa46d591 ]--- After some investigation, I think I found the root cause: commit 2bfc6cd ("move kernel mapping outside of linear mapping") moves BPF JIT region after the kernel: | #define BPF_JIT_REGION_START PFN_ALIGN((unsigned long)&_end) The &_end is unlikely aligned with PMD size, so the front bpf jit region sits with part of kernel .data section in one PMD size mapping. But kernel is mapped in PMD SIZE, when bpf_jit_binary_lock_ro() is called to make the first bpf jit prog ROX, we will make part of kernel .data section RO too, so when we write to, for example memset the .data section, MMU will trigger a store page fault. To fix the issue, we need to ensure the BPF JIT region is PMD size aligned. This patch acchieve this goal by restoring the BPF JIT region to original position, I.E the 128MB before kernel .text section. The modification to kasan_init.c is inspired by Alexandre. Fixes: fc85047 ("riscv: bpf: Avoid breaking W^X") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
ASan reported a memory leak of BPF-related ksymbols map and dso. The
leak is caused by refount never reaching 0, due to missing __put calls
in the function machine__process_ksymbol_register.
Once the dso is inserted in the map, dso__put() should be called
(map__new2() increases the refcount to 2).
The same thing applies for the map when it's inserted into maps
(maps__insert() increases the refcount to 2).
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 6992 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20
#2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10
[...]
Indirect leak of 8702 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20
#2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9
Rust-for-Linux#3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21
[...]
Indirect leak of 1520 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8
[...]
Indirect leak of 1406 byte(s) in 19 object(s) allocated from:
#0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
#1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
#2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8
[...]
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
JoseTeuttli
pushed a commit
that referenced
this pull request
Jul 13, 2021
This reverts commit 1815d9c. Unfortunately this inverts the locking hierarchy, so back to the drawing board. Full lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex); *** DEADLOCK *** 1 lock held by kms_frontbuffer/1087: #0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 stack backtrace: CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 Call Trace: dump_stack+0x7f/0xad check_noncircular+0x12e/0x150 __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Note that this broke the intel-gfx CI pretty much across the board because it has to reboot machines after it hits a lockdep splat. Testcase: igt/debugfs_test/read_all_entries Acked-by: Petri Latvala <petri.latvala@intel.com> Fixes: 1815d9c ("drm: add a locked version of drm_is_current_master") Cc: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210622075409.2673805-1-daniel.vetter@ffwll.ch
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.