[DPB] [Mellanox] added capability files for SN4600 platform #5
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
- Why I did it Support shared headroom pool Signed-off-by: Stephen Sun stephens@nvidia.com - How I did it Port configurations for SKUs based on 2700/3800 platform from 201911 For SN3800 platform: C64: 32 100G down links and 32 100G up links. D112C8: 112 50G down links and 8 100G up links. D24C52: 24 50G down links, 20 100G down links, and 32 100G up links. D28C50: 28 50G down links, 18 100G down links, and 32 100G up links. For SN2700 platform: D48C8: 48 50G down links and 8 100G up links C32: 16 100G downlinks and 16 100G uplinks Add configuration for Mellanox-SN4600C-D112C8 112 50G down links and 8 100G up links. - How to verify it Run regression test.
To have the following fixes: * All | Port status remains down after warm boot and flapping the port on peer side * All | LAG HASH | IPv6 SRC_IP is not accounted in LAG hashing [ * All | ASIC driver | Kernel crash observed when driver reload is initiated before it fully loaded * Spectrum-3 | Buffer | In lossless configuration, headroom is been evicted only when the shared buffers is free * All | prevent FW access during ISSU Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
…ault (sonic-net#6444) Signed-off-by: Andriy Yurkiv <ayurkiv@nvidia.com>
As we are currently in the process of removing Python 2 from SONiC, to ensure a seamless transition to Python 3.
This PR updates the following commits c6b642b [ci]: download from sonic-buildimage.vs artifact (sonic-net#168) e76ecc6 [sonic_y_cable] add support for retrieving firmware info for Y cable, internal and nic temperature and voltage (sonic-net#162) f9cf8c9 [GitHub] Add pull request template (sonic-net#167) c31636e [ci] Call pip2/3 using sudo (sonic-net#166) 5521f67 [ci] Test and build packages using Azure Pipelines (sonic-net#164) faca35c [ci]: Set up CI with Azure Pipelines Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Update FRR 7.5 head. The following is a list of new commits. ``` e2f17ae47ad047e66923c2ff1e84c9ba10d4ad38 Merge pull request sonic-net#8096 from idryzhov/7.5-backports-2021-02-16 380341362ced8e317c18b7395acb012de1f23acd ospf6d: Don't send hellos on loopback interface 7fa78b659f8e720466e0df62689327ea4b9ff867 bgpd: send correct BMP down message when nht fails 385faf6c079a41def1e6eb882cbfd50047559644 [filter]: change return code for errors d9a0e9a2934f2f75c64496fe4c724a18aa581fcb bfdd: fix session lookup 08afa0a75311a4e8cb2a18116384b603f7f2d751 ospf6d : fix issue in ecmp inter area route 2299afa1a9128d87d5169742b993c0ada575eb83 ospfd: Prevent duplicate packet read in certain vrf situations ff42a28af659ee61c0efb877b10738a5812f4bc2 vrf: use wrappers to change VRF_CONFIGURED flag 2bdc59ca21da2d67b77ec70a2fadffbca60690cd vrf: mark vrf as configured when entering vrf node b9611f65a71adc0b8fa14a5a4d1a8f44e04dcd85 ospf6d: Fix LSA formatting out-of-bounds access 610ebf56913fa56167b0a2a127b07afe020a1efe bfdd: Prevent use after free ( again ) 35b0cd5d753dda9aa70ea1c06db61a8d4b8671e3 *: Fix usage of bfd_adj_event 95b8915d0f4de3eae5438632ecd0827061ef48e8 ospf6d: Fix LSA formatting inconsistent retvals 49d73d8be84dbd23d767697474019165e511786c pimd: SGRpt prune received during prune didn't override holdtime 1d0d19afa9bb7cd4bc476d00c887876bc04eee95 eigrpd: Correctly set the mtu for eigrp packets sent bbb08db69f8eb554d23b4920c1c1e3982d8d2a91 zebra: Prevent sending of unininted data 0813d650a8120458ab7d9317061f3864dbc6f2f7 ospf6d: prevent use after free 2f2e981d967b36b240fca82fea8a961d927ef43c lib: Prevent unininted usage of data 6171becdb391ea5b88916a3a28b04b555e1fc518 bfdd: Prevent storage of ifp pointer that has been deleted 9ebb41cf4bb51e0872796530bf8c7a4d819053db bfdd: Prevent unininited data transmittal 72e16db6fea3629111537f9eb10c86f2d275adcb eigrpd: Prevent uninitialized value from being used 72b61a5bb09d59c3cc0d1d401d51de96949dff52 zebra: disallow resolution to duplicate nexthops 1083bae40b00c0ed2c9f3521ae1ab9675a87202e bgpd: Initialize bgp_notify.raw_data before passing to bgp_notify_receive() 31df7314310416f10c133dcfe9c4586edadf3fbb doc: ebgp-requires-policy requires manuall session clearing ecc8ec678d2d8a1c3d1d50a22732f9fc4bad689c watchfrr: fix SA warning 9d9365d161979a031de817c1fbcab6508dfee013 watchfrr: fix crash on missing optional argument 907e600d63c1c5b6bda40b0a08344a72533b1787 pimd: Prevent use after free b47374f0e95d99c93bfe2d14afe55219a9fda455 doc: Update bgp doc for more rfc-8212 talk 4fbeef60cc8dc5362ff84fc91d1a4e343e4e32c7 docker: centos 7, 8 yang bump and repo fixes 808e6d731f330df4a91fdfd6df6a3c8dce1651a6 docker: prefer alpine:latest for building 91b3c471f1c48818370a0f218add917f0d46aa47 Merge pull request sonic-net#8092 from donaldsharp/7.5_track 60be43c0bf63c16ca42008fa802d0a2050f3fce2 Merge pull request sonic-net#8090 from ton31337/fix/static_network_vrf_7.5 1f6785aa60cc57a5c8d5de98c9c09a344a0c9262 ospf6d: Track wait_timer and disable when needed c89e326be91312bed066eb2447ea8944e25a225e bgpd: Check for peer->su_remote if not NULL when handling IPv6 nexthop 15e070f6448870c98c030b6b5013ad8750d8918b Merge pull request sonic-net#8047 from pguibert6WIND/nhrp_shortcut_routes_75 912994efec94082ae7d8c5e014c410964bea19f4 Merge pull request sonic-net#8034 from qlyoung/fix-gnu-readline-bracketed-paste-7.5.1 9f50536993f1eb900fbfbe98d21b8c072bbd9c15 nhrpd: replace nhrp route nexthop with onlink route when prefix=nh 8c185008246db31c34574d7b79358001ac411f84 nhrpd: shortcut routes installed with nexthop. c46c87d19758040bc3f3902ab8e4a0f1bb908721 vtysh: disable bracketed paste in readline 20b35e4c3386de798f3b0cb9f2a7e6b04d995485 Merge pull request sonic-net#8018 from ton31337/fix/drop_aggregate_as_attribute_if_malformed_7.5 fa25d7327fd64613cc7530aba2edfcde038da074 bgpd: Unset only aggregator flag when AGGREGATOR_AS is 0 3ee9a3726fe1a526d946c1978487a4509fe98f29 bgpd: Drop aggregator_as attribute if malformed in case of BGP_AS_ZERO be88595c6a2011f0e882bfa663baa61c86ede14e Merge pull request sonic-net#8005 from opensourcerouting/snap-libyang1-fix-75 fd840ad37f2e836b210c6e60fc6325a4c3e495ce snapcraft: Update rtrlib to 0.7.0 3d00552fa9aedb96acd7ea773bc14fd2b77e7e0f snapcraft: Fix passthrough path for Libyang 1.x ```
This PR includes the following commit in sonic-platform-daemons 068bccc [xcvrd] Store mux_cable telemetry data in State DB (sonic-net#148) 93cac0a [ci]: download from sonic-buildimage.vs artifact (sonic-net#152) d651e9b [GitHub] Add pull request template (sonic-net#151) bd7830b [pcied] Remove unnecessary message and move the configuration path (sonic-net#144) 9080fda [ci] Call pip2/3 using sudo (sonic-net#150) de60784 [ci] Test and build packages using Azure Pipelines (sonic-net#149) 8bf0fd1 [ledd] Refactor to allow for more thorough unit testing; Increase unit test coverage (sonic-net#147) 26bdc9e Set up CI with Azure Pipelines 1fcaa57 [pcied] Add PCIe AER stats collection (sonic-net#100) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Open ACL Outer VLAN ID for egress for ports part of VLAN RIF - Why I did it Open ACL Outer VLAN ID for egress for ports part of VLAN RIF - How I did it Updated SAI submodule pointer - How to verify it Build an image, deploy and check all is up and running. Verify ACL sonic-mgmt test is passing Signed-off-by: Volodymyr Samotiy <volodymyrs@nvidia.com>
- Why I did it Mellanox-SN4600C-D112C8 SKU is not configured properly. It should have 112 50G interfaces and 8 100G interfaces as described on this PR. - How I did it Modify sai_profile, port_config.ini and hwsku.json for DPB. - How to verify it Apply this HwSKU to a MSN4600C Mellanox platform. Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
Change in this update:
b75aab7 [swss-common] Add LINKMGR CFG and MUX LINKMGR state table names (sonic-net#421)
4a77d1c [ci]: add vstest (sonic-net#459)
07258a6 [ci]: use build template (sonic-net#457)
ddcae3e runRedisScript api to process integer returned by script run in the redis (sonic-net#447)
33d89c7 [systemlag] Schema defs for system lag (sonic-net#448)
af01f37 spell check fixes (sonic-net#456)
7afd43d Update to make getNamespaces() API at par with the get_ns_list() swssdk-py API. (sonic-net#455)
signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
…raph (sonic-net#6219) Update topology script to retrieve hwsku from minigraph if hwsku information is not available in config_db. Fix clean up of interfaces in msft_multi_asic_vs hwsku topology script. - Why I did it When bringing up multi-asic VS switch, topology service is started during boot up. Topology service starts a shell script which runs the topology script present in /usr/share/sonic/device// directory. To invoke hwsku specific script, the topology script tries to retrieve hwsku information from config_db. During initial boot up config_db might not be populated. In order to start topology service before config_db is updated, update topology script to get hwsku information from minigraph.xml if it is available. This will be helpful to bring up multi-asic VS testbed by loading minigraph and starting topology service. - How I did it Update topology.sh script to retrieve hwsku information from minigraph.xml. Fix clean up function on msft_multi_asic_vs toplogy script. - How to verify it single-asic VS - no change; topology service is only enabled for multi-asic VS. multi-asic VS - Bring up multi-asic VS image, copy minigraph to vs image, start topology service. Topology service should be successful. to test clean up function fix, start topology service - make sure interfaces are created and moved to the right namespaces. stop topology service - make sure namespace do not have any interface and all front end interfaces are present in default namespace.
- Add support for `DCS-7050SX3-48YC8` and `DCS-7050SX3-48C8` platform - Add support for more variants of `DCS-7280CR3-32[PD]4` - Add Supervisor to Linecard consutil support - Complete Watchdog platform API support - Fix some PSU behavior on `DCS-7050QX-32` and `DCS-7060CX-32S` - Fix SEU management on `DCS-7060CX-32S` - Allow kernel modules to build up to linux 5.10 - Rename led color `orange` to `amber` - Miscellaneous fixes
…onic-net#6475) - Why I did it The pcie configuration file location is under plugin directory not under platform directory. sonic-net#6437 - How I did it Move all pcie.yaml configuration file from plugin to platform directory. Remove unnecessary timer to start pcie-check.service Move pcie-check.service to sonic-host-services - How to verify it Verify on the device
sonic-net#6833) It is possible that one interface attaches multiple vlans. The VlanInterface should be in tagged mode. Signed-off-by: Qi Luo <qiluo-msft@users.noreply.github.com>
Set correct MTU size of internal interface for Newport platform
Needed support for platform system health in Dell platforms
#### Why I did it Fix runtime issues caused by SONiC update #### How I did it - new attribute SAI_ACL_ENTRY_ATTR_FIELD_ACL_IP_TYPE supported - new attribute SAI_SWITCH_ATTR_AVAILABLE_IPMC_ENTRY supported Signed-off-by: Roman Savchuk <romanx.savchuk@intel.com>
show ip interfaces is enhanced recently to support multi ASIC platforms in this PR- sonic-net/sonic-utilities#1396 . The ipintutil script as to run as sudo user, to get the ip interface from each namespace. Add this script to the sudoer file so that show ip interface command is available for user with read-only permissions Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
- Improve sonic-mgmt platform test suite pass rate - Improve coverage of platform unit tests - Provide platform specific reboot logic as per platform porting guide - Fix bug due to pcie.yaml file being located in the wrong directory
183162f Fix issue: expect redis pubsub data to be str type instead of bytes type (sonic-net#196) #### Why I did it Update submodule pointer for snmpagent to include PR sonic-net/sonic-snmpagent#196 #### How I did it Update submodule pointer for snmpagent #### How to verify it Run build
To fix sonic-net#6860 Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
1. Add supervisord as the entrypoint of docker-macsec
2. Add wpa_supplicant conf into docker-macsec
3. Set the macsecmgrd as the critical_process
4. Configure supervisor to monitor macsecmgrd
5. Set macsec in the features list
6. Add config variable `INCLUDE_MACSEC`
7. Add macsec.service
**- How to verify it**
Change the `/etc/sonic/config_db.json` as follow
```
{
"PORT": {
"Ethernet0": {
...
"macsec": "test"
}
}
...
"MACSEC_PROFILE": {
"test": {
"priority": 64,
"cipher_suite": "GCM-AES-128",
"primary_cak": "0123456789ABCDEF0123456789ABCDEF",
"primary_ckn": "6162636465666768696A6B6C6D6E6F707172737475767778797A303132333435",
"policy": "security"
}
}
}
```
To execute `sudo config reload -y`, We should find the following new items were inserted in app_db of redis
```
127.0.0.1:6379> keys *MAC*
1) "MACSEC_EGRESS_SC_TABLE:Ethernet0:72152375678227538"
2) "MACSEC_PORT_TABLE:Ethernet0"
127.0.0.1:6379> hgetall "MACSEC_EGRESS_SC_TABLE:Ethernet0:72152375678227538"
1) "ssci"
2) ""
3) "encoding_an"
4) "0"
127.0.0.1:6379> hgetall "MACSEC_PORT_TABLE:Ethernet0"
1) "enable"
2) "false"
3) "cipher_suite"
4) "GCM-AES-128"
5) "enable_protect"
6) "true"
7) "enable_encrypt"
8) "true"
9) "enable_replay_protect"
10) "false"
11) "replay_window"
12) "0"
```
Signed-off-by: Ze Gan <ganze718@gmail.com>
* remove trailing / from url for submodule "platform/mellanox/hw-management/hw-mgmt" Signed-off-by: Don Newton don@opennetworking.org
…net#6558) - Why I did it Current mutli-asic vs hwsku consists of 6 asics with each asic having 32 interfaces. When bringing this up, below issue was seen: When all 32 interfaces(sonic interfaces and linux interface) are set to 9100 mtu, DMA error is seen "DMA: Out of SW-IOMMU space for 4096 bytes at device 0000:06:03.0" which can be fixed by updating swiotlb=65536 in /host/grub/grub.cfg .In order to keep multi-asic VS lighter and easier to bring up and test, new hwsku 'msft_four_asic_vs' is added to represent 4-asic hwsku with 2 frontend asics and 2 backend asics and each asic having 8 interfaces interconnected by port-channels. - How I did it Add msft_four_asic_hwsku directory to have the right number of directories (4) and update port_config.ini and lanemap.ini files to include 8 ports information. Add topology.sh script to create the internal asic-asic connectivity. - How to verify it Update asic.conf with the 4 asic information as below and build sonic-vs.img: NUM_ASIC=4 DEV_ID_ASIC_0=0 DEV_ID_ASIC_1=1 DEV_ID_ASIC_2=2 DEV_ID_ASIC_3=3 Modify sonic_multiasic.xml to have 8 front panel interfaces. create virtual switch using "sudo virsh sonic_mutliasic.xml" command. Start topology service and Load config_db files for switch and each asic. Ensure that that all internal interfaces and port_channels are coming up. multi-asic vs testbed: Bring up mutli-asic VS testbed with a multi-asic image(asic.conf updated to 4 asics) and using t1-lag topology. ./testbed-cli.sh -t vtestbed.csv -m veos_vtb -k ceos add-topo vms-kvm-four-asic-t1-lag password.txt Load minigraph/config_dbs. Ensure all internal and external interfaces come up. No change on single asic vs.
What I did:- For multi-asic platforms added iptable v4 rule to communicate on docker bridge ip For multi-asic platforms extend iptable v4 rule for iptable v6 also For multi-asic program made all internal rules applicable for all protocols (not filter based on tcp/udp). This is done to be consistent same as local host rule For multi-asic platforms made nat rule (to forward traffic from namespace to host) generic for all protocols and also use Source IP if present for matching
#### Why I did it EEPROM read failure was seen in Dell platforms #### How I did it Make python 2/3 compliant API's to fix the issue
Add support for Accton as4630-54te platform
…alizer (sonic-net#6854) In preparation for the merging of sonic-net/sonic-platform-common#173, which properly defines class and instance members in the Platform API base classes. It is proper object-oriented methodology to call the base class initializer, even if it is only the default initializer. This also future-proofs the potential addition of custom initializers in the base classes down the road.
…lizer (sonic-net#6853) In preparation for the merging of sonic-net/sonic-platform-common#173, which properly defines class and instance members in the Platform API base classes. It is proper object-oriented methodology to call the base class initializer, even if it is only the default initializer. This also future-proofs the potential addition of custom initializers in the base classes down the road.
…ializer (sonic-net#6852) In preparation for the merging of sonic-net/sonic-platform-common#173, which properly defines class and instance members in the Platform API base classes. It is proper object-oriented methodology to call the base class initializer, even if it is only the default initializer. This also future-proofs the potential addition of custom initializers in the base classes down the road.
… from Supervisord. (sonic-net#6849) Signed-off-by: Yong Zhao yozhao@microsoft.com Why I did it In the configuration of rsyslog, duplicate messages will be suppressed and reported in the format of message repeated n times. Due to this behavior, if a critical process in a container exited unexpectedly, the alerting message will be written into syslog once and not be written into syslog anymore until the second critical process exited. This PR aims to differentiate these alerting messages such that they will not be suppressed by rsyslogd and can appear in the syslog periodically. How I did it This PR adds a counter into the alerting message and shows how many minutes a critical process was not running. How to verify it I verified and test this implementation on a physical DUT.
…onic-net#6848) Enable BBR config allowas-in 1 for internal peers Why I did: To advertise BBR routes learnt via e-BGP peer in one asic/namespace to another iBGP asic/namespace via Route Reflector.
…pport a… (sonic-net#6831) To fix [DPB| wrong aliases for interfaces](sonic-net#6024) issue, implimented flexible alias support [design doc](sonic-net/SONiC#749) > [[dpb|config] Fix the validation logic of breakout mode](sonic-net/sonic-utilities#1440) depends on this #### How I did it 1. Removed `"alias_at_lanes"` from port-configuration file(i.e. platfrom.json) 2. Added dictionary to "breakout_modes" values. This defines the breakout modes available on the platform for this parent port, and it maps to the alias list. The alias list presents the alias names for individual ports in order under this breakout mode. ``` { "interfaces": { "Ethernet0": { "index": "1,1,1,1", "lanes": "0,1,2,3", "breakout_modes": { "1x100G[40G]": ["Eth1"], "2x50G": ["Eth1/1", "Eth1/2"], "4x25G[10G]": ["Eth1/1", "Eth1/2", "Eth1/3", "Eth1/4"], "2x25G(2)+1x50G(2)": ["Eth1/1", "Eth1/2", "Eth1/3"], "1x50G(2)+2x25G(2)": ["Eth1/1", "Eth1/2", "Eth1/3"] } } } ``` #### How to verify it `config interface breakout` Signed-off-by: Sangita Maity <samaity@linkedin.com>
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
Signed-off-by: Nazarii Hnydyn <nazariig@nvidia.com>
…mbers (sonic-net#6895) #### Why I did it Some platforms have difficult to attach egress ACL to vlan. #### How I did it For egress ACL attaching to vlan, break them into vlan members. #### How to verify it Unit test Tested in DUT
1. Made the command next-hop-self force only applicable on back-end asic bgp. This is done so that BGPL iBGP session running on backend can send e-BGP learn nexthop. Back end asic FRR is able to recursively resolve the eBGP nexthop in its routing table since it knows about all the connected routes advertise from front end asic. 2. Made all front-end asic bgp use global loopback ip (Loopback0) as router id and back end asic bgp use Loopbacl4096 as ruter-id and originator id for Route-Reflector. This is done so that routes learnt by external peer do not see Loopback4096 as router id in show ip bgp <route-prerfix> output. 3. To handle above change need to pass Loopback4096 from BGP manager for jinja2 template generation. This was missing and this change/fix is needed for this also https://github.com/Azure/sonic-buildimage/blob/master/dockers/docker-fpm-frr/frr/bgpd/templates/dynamic/instance.conf.j2#L27 4. Enhancement to add mult_asic specific bgpd template generation unit test cases.
…nic-net#6896) - Add support for VLAN ID match - Add support for ICMP type/code match Signed-off-by: Danny Allen <daall@microsoft.com>
1. [dni_dps460] Add attributes to retrieve PMBus status command codes sonic-net/sonic-linux-kernel@65fccd7 2. [mellanox]: Backport new kernel patches sonic-net/sonic-linux-kernel@2fcd4e3 3. [ci]: build amd64/armhf/arm64 for CI build sonic-net/sonic-linux-kernel@7c57fef 4. Fix read and write failure to ‘fan1_target’ attribute of ‘dni_dps460’ sonic-net/sonic-linux-kernel@fc74b1c 5. [backport]: i2c mux pca954x allow management of device idle state sonic-net/sonic-linux-kernel@173ebe7 6. README: Fix typo in *difficult* sonic-net/sonic-linux-kernel@7778c99
As of the merging of PR sonic-net#6799, we are now installing a newer version of scapy via pip, therefore there is no longer a need to install the older Debian package.
…-net#6692) - Why I did it Bug fixes - In rare cases when thermal algorithm is reactivated after FAN/PSU insertion, FAN remains at high rpm - When stop hw-management code received error in the log instead of exit code '0'. - In SPC1 i2c sometimes collide with chip reset coming from SDK - Remove raw eeprom data link, when working with PSU which don't have eeprom for "msn274x", "msn24xx" and "msn27xx" systems - Fix memory leak on mlxsw_core_bus_device module removal - How I did it Update the hw-mgmt version number in the make file Update the hw-mgmt repo pointer - How to verify it run platform related test cases on all Mellanox platform Signed-off-by: Kebo Liu <kebol@nvidia.com>
…ms (sonic-net#6913) - Why I did it To fix PCIEd errors in log. - How I did it Update pcie.yaml with the right PCI addresses. - How to verify it Check logs, operation occurs each minute. Signed-off-by: liora <liora@nvidia.com>
…t#6887) - Why I did it To add support for the dynamic breakout on Mellanox platform x86_64-mlnx_msn4600 - How I did it Add the relevant files describing Mellanox platform x86_64-mlnx_msn4600 breakout modes to a new device folder. - How to verify it System bringup is completed, all interfaces are up. Platform tests suits all is passing.
…onic-net#6887)" This reverts commit 0820201.
DavidZagury
pushed a commit
that referenced
this pull request
Dec 8, 2021
Also add out of tree pca9548 mux driver to use platform data to mapping i2c bus with front panel port. Signed-off-by: Jakkapan Jangmuang <jjangmua@celestica.com> Co-authored-by: Saikrishna Arcot <sarcot@microsoft.com>
DavidZagury
pushed a commit
that referenced
this pull request
Oct 18, 2022
… URL support "not to use cac (sonic-net#12394) he" (#45) * 4f45e3a Update gnmi_cli (#5) (#44)
DavidZagury
pushed a commit
that referenced
this pull request
Dec 18, 2022
Added below commits: 9b30690 jcaiMR Fri Dec 16 fix handleSwssNotification crash in dhcp6relay (#28) 047afb7 jcaiMR Wed Dec 14 14:08:58 2022 +0800 Fix multiple vlan issue (#27) ff6bec3 Vivek Thu Dec 8 09:44:15 2022 -0800 Made the Error log informative (#22) 2fbe729 jcaiMR Wed Nov 30 14:41:53 2022 +0800 disable cfg dynamic change (#25) 13d0805 Liu Shilong Wed Nov 30 10:54:11 2022 +0800 Use github code scanning instead of LGTM (#26) 1e846f6 kellyyeh Wed Nov 23 14:36:02 2022 -0800 Fix packet range check for relay-reply packets (#21) 4d19e13 kellyyeh Thu Nov 17 10:04:53 2022 -0800 Add unittest infrastructure (#5) 7f4fdab jcaiMR Fri Nov 11 14:47:51 2022 +0800 fix packet range check issue (#20) 257ecdf kellyyeh Thu Nov 3 11:34:11 2022 -0700 Add client packet UDP header length check (#19)
DavidZagury
pushed a commit
that referenced
this pull request
Jan 26, 2023
advance dhcp relay for 202211 4bf1868 - (HEAD, origin/master, origin/HEAD, master) fix relay-reply dhcpv6 packet counter issue (add support for a7050 qx32 platform #29) (2 weeks ago) [jcaiMR] 9b30690 - fix handleSwssNotification crash in dhcp6relay (Add libnl-nf-3-200 to docker-team #28) (4 weeks ago) [jcaiMR] 047afb7 - Fix multiple vlan issue (Failure trying to run: chroot /sonic-buildimage/fsroot mount -t proc proc /proc #27) (4 weeks ago) [jcaiMR] ff6bec3 - Made the Error log informative (add python-tenjin as build dependency for p4-switch #22) (5 weeks ago) [Vivek] 2fbe729 - disable cfg dynamic change (p4: fix build dependency for python-p4c-bm #25) (6 weeks ago) [jcaiMR] 13d0805 - Use github code scanning instead of LGTM (Removed sx-libnl from Mellanox containers dependencies. #26) (6 weeks ago) [Liu Shilong] 1e846f6 - Fix packet range check for relay-reply packets (update sonic-swss and p4-switch submodule to fix docker sonic p4 bug #21) (7 weeks ago) [kellyyeh] 4d19e13 - Add unittest infrastructure (Cavium customization for docker containers #5) (8 weeks ago) [kellyyeh] 7f4fdab - fix packet range check issue (Makefile: add build dependency for python-p4c-bm #20) (9 weeks ago) [jcaiMR] 257ecdf - Add client packet UDP header length check (change port_config.ini directory for s6000 #19) (2 months ago) [kellyyeh]
DavidZagury
pushed a commit
that referenced
this pull request
Dec 10, 2024
To fix a statistical issue. The original fix was done in FRRouting/frr#17297. However to accommodate 8.5.4 the patch in the PR was added. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'. Program terminated with signal SIGABRT, Aborted. #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 [Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))] (gdb) bt #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6 #3 0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678 #4 0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352 #5 0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258 #6 route_next (node=<optimized out>) at ../lib/table.c:436 #7 route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410 #8 0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020") at ../zebra/interface.c:312 #9 0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867 #10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221 #11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810 #12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990 #13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198 #14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
DavidZagury
pushed a commit
that referenced
this pull request
Jan 21, 2025
…et#21095) Adding the below fix from FRR FRRouting/frr#17297 This is to fix the following crash which is a statistical issue [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'. Program terminated with signal SIGABRT, Aborted. #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 [Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))] (gdb) bt #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6 #3 0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678 #4 0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352 #5 0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258 #6 route_next (node=<optimized out>) at ../lib/table.c:436 #7 route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410 #8 0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020") at ../zebra/interface.c:312 #9 0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867 #10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221 #11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810 #12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990 #13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198 #14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
DavidZagury
pushed a commit
that referenced
this pull request
Feb 2, 2025
…et#21405) <!-- Please make sure you've read and understood our contributing guidelines: https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md failure_prs.log skip_prs.log Make sure all your commits include a signature generated with `git commit -s` ** If this is a bug fix, make sure your description includes "fixes #xxxx", or "closes #xxxx" or "resolves #xxxx" Please provide the following information: --> #### Why I did it Adding the below fix from FRR FRRouting/frr#17297 This is to fix the following crash which is a statistical issue ``` [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'. Program terminated with signal SIGABRT, Aborted. #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 [Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))] (gdb) bt #0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6 #3 0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678 #4 0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352 #5 0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258 #6 route_next (node=<optimized out>) at ../lib/table.c:436 #7 route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410 #8 0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020") at ../zebra/interface.c:312 #9 0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867 #10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221 #11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810 #12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990 #13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198 #14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478 ``` ##### Work item tracking - Microsoft ADO **(number only)**: #### How I did it Added patch. #### How to verify it Running BGP tests. <!-- If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012. --> #### Which release branch to backport (provide reason below if selected) <!-- - Note we only backport fixes to a release branch, *not* features! - Please also provide a reason for the backporting below. - e.g. - [x] 202006 --> - [ ] 201811 - [ ] 201911 - [ ] 202006 - [ ] 202012 - [ ] 202106 - [ ] 202111 - [ ] 202205 - [ ] 202211 - [ ] 202305 #### Tested branch (Please provide the tested image version) <!-- - Please provide tested image version - e.g. - [x] 20201231.100 --> - [ ] <!-- image version 1 --> - [ ] <!-- image version 2 --> #### Description for the changelog <!-- Write a short (one line) summary that describes the changes in this pull request for inclusion in the changelog: --> <!-- Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU. --> #### Link to config_db schema for YANG module changes <!-- Provide a link to config_db schema for the table for which YANG model is defined Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md --> #### A picture of a cute animal (not mandatory but encouraged)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
To add support for the dynamic breakout on Mellanox platform x86_64-mlnx_msn4600
How I did it
Add the relevant files describing Mellanox platform x86_64-mlnx_msn4600 breakout modes to a new device folder.
How to verify it
System bringup is completed, all interfaces are up.
Platform tests suits all is passing.
Which release branch to backport (provide reason below if selected)
Description for the changelog
A picture of a cute animal (not mandatory but encouraged)