Compact Flash Card Interface for MSX based on SC729 RCBus Compact Flash Module originally designed by Tadeusz Pycio and Beer IDE 232 by b3rendsh
| Reference | Value | Description |
|---|---|---|
| U1 | 27C512 | EEPROM 64Kb x 8 (512kbits) |
| U2 | 74HCT32 | TTL chip, can be either LS, HC or HCT |
| U3 | 74HCT74 | TTL chip, can be either LS, HC or HCT |
| U4 | 74HCT138 | TTL chip, can be either LS, HC or HCT |
| U5 | 74HC245 | TTL chip, can be either LS, HC or HCT |
| Q1 | BC548 | NPN transistor |
| LD1 | -- | Diameter 3.0mm, Red |
| D1 | 1N4148 | Fast diode, Sillicon (alternatives 1N914) |
| Reference | Value | Description |
|---|---|---|
| C1,C2,C3,C4,C5 | 100nF | Capacitor, Ceramic disc or Polyester |
| C6 | 100uF/16V | Electrolytic Capacitor (preferrable low profile) |
| Reference | Value | Description |
|---|---|---|
| R1,R2,R3,R6 | 4K7 | Resistor, ¼ Watt |
| R4 | 1K | Resistor, ¼ Watt |
| R5 | 10K | Resistor, ¼ Watt |
| Reference | Value | Description |
|---|---|---|
| SW1 | -- | SPDT Switch, slide, right angle (reference OS102011MA1QN1) |
| CN1 | -- | Printed Circuit Board Gerbers |
| JP1 | -- | Pin Header, 1x3 pin, pitch 2.54mm, straight (Vertical) |
| JP2,JP3,JP4 | -- | Pin Header, 1x2 pin, pitch 2.54mm, straight (Vertical) |
| J1 | Pin Header, 2x22 pin, pitch 2.0mm, right angle (Horizontal) |
|---|
| J2 | Pin Header, 2x20 pin, pitch 2.54mm, right angle (Horizontal) |
|---|
| J3 | CF Card Connector (reference 3M_N7E50-E516xx-30) |
|---|