-Wparentheses-equality in fs/ocfs2/dlm/dlmthread.c #40
Assignees
Labels
-Wparentheses-equality
[BUG] linux
A bug that should be fixed in the mainline kernel.
[FIXED][LINUX] 4.20
This bug was fixed in Linux 4.20
Comments
|
I'll send a patch for this one. |
nickdesaulniers
pushed a commit
that referenced
this issue
Sep 11, 2018
In 4.19-rc1, Eugeniy reported weird boot and IO errors on ARC HSDK | INFO: task syslogd:77 blocked for more than 10 seconds. | Not tainted 4.19.0-rc1-00007-gf213acea4e88 #40 | "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this | message. | syslogd D 0 77 76 0x00000000 | | Stack Trace: | __switch_to+0x0/0xac | __schedule+0x1b2/0x730 | io_schedule+0x5c/0xc0 | __lock_page+0x98/0xdc | find_lock_entry+0x38/0x100 | shmem_getpage_gfp.isra.3+0x82/0xbfc | shmem_fault+0x46/0x138 | handle_mm_fault+0x5bc/0x924 | do_page_fault+0x100/0x2b8 | ret_from_exception+0x0/0x8 He bisected to 84c6591 ("locking/atomics, asm-generic/bitops/lock.h: Rewrite using atomic_fetch_*()") This commit however only unmasked the real issue introduced by commit 4aef66c ("locking/atomic, arch/arc: Fix build") which missed the retry-if-scond-failed branch in atomic_fetch_##op() macros. The bisected commit started using atomic_fetch_##op() macros for building the rest of atomics. Fixes: 4aef66c ("locking/atomic, arch/arc: Fix build") Reported-by: Eugeniy Paltsev <paltsev@synopsys.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: wrote changelog]
|
There's another easy one in: CC drivers/ata/pata_atiixp.o
drivers/ata/pata_atiixp.c:282:19: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/ata/pata_atiixp.c:282:19: note: remove extraneous parentheses around the
comparison to silence this warning
if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
~ ^ ~
drivers/ata/pata_atiixp.c:282:19: note: use '=' to turn this equality comparison into
an assignment
if((pdev->device == PCI_DEVICE_ID_ATI_IXP600_IDE))
^~
=(should be a separate patch, and probably GH issue). Bust out your old parallel ATA hard drives! 🎆 |
CC drivers/block/rsxx/cregs.o
drivers/block/rsxx/cregs.c:279:15: warning: equality comparison with extraneous
parentheses [-Wparentheses-equality]
if ((cmd->op == CREG_OP_READ)) {
~~~~~~~~^~~~~~~~~~~~~~~
drivers/block/rsxx/cregs.c:279:15: note: remove extraneous parentheses around the
comparison to silence this warning
if ((cmd->op == CREG_OP_READ)) {
~ ^ ~
drivers/block/rsxx/cregs.c:279:15: note: use '=' to turn this equality comparison into
an assignment
if ((cmd->op == CREG_OP_READ)) {
^~
=
|
|
@nickdesaulniers do you want a |
|
Yeah man, include me in the screenshot. 🤳 |
|
Patch sent for the first warning: https://lore.kernel.org/lkml/20180911213401.23925-1-natechancellor@gmail.com/ |
|
Patch sent for the second warning: https://lore.kernel.org/lkml/20180911214338.1109-1-natechancellor@gmail.com/ |
|
Patch sent for the third warning: https://lore.kernel.org/lkml/20180911215040.7906-1-natechancellor@gmail.com/ |
|
The second and third patches have been accepted and are currently in -next: I'll resend the first patch on Monday (looks like I need to send it to Andrew Morton based on git history). |
|
First patch resent: https://lore.kernel.org/lkml/20180924181929.6853-1-natechancellor@gmail.com/ |
|
Patch has been accepted for a while but it just showed up in -next a few days ago: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=90bb74ee01489f89a2bcf3a191510e26bf1e3a64 |
|
Second and third patches merged into mainline, will close when the fs/ocfs2 one is merged. |
|
fs/ocfs2 patch has been applied in mainline: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=32c1b90dcd90c7f6343e1b328801f7be5f7da88d |
nathanchance
pushed a commit
that referenced
this issue
Nov 9, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
nathanchance
pushed a commit
that referenced
this issue
May 31, 2019
…text
stub_probe() and stub_disconnect() call functions which could call
sleeping function in invalid context whil holding busid_lock.
Fix the problem by refining the lock holds to short critical sections
to change the busid_priv fields. This fix restructures the code to
limit the lock holds in stub_probe() and stub_disconnect().
stub_probe():
[15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418
[15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip
[15217.927044] 5 locks held by usbip/29087:
[15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40
[15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15217.927109] Call Trace:
[15217.927118] dump_stack+0x63/0x85
[15217.927127] ___might_sleep+0xff/0x120
[15217.927133] __might_sleep+0x4a/0x80
[15217.927143] kmem_cache_alloc_trace+0x1aa/0x210
[15217.927156] stub_probe+0xe8/0x440 [usbip_host]
[15217.927171] usb_probe_device+0x34/0x70
stub_disconnect():
[15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip
[15279.182492] 5 locks held by usbip/29114:
[15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40
[15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15279.182546] Call Trace:
[15279.182554] dump_stack+0x63/0x85
[15279.182561] ___might_sleep+0xff/0x120
[15279.182566] __might_sleep+0x4a/0x80
[15279.182574] __mutex_lock+0x55/0x950
[15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182587] ? reacquire_held_locks+0xec/0x1a0
[15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182597] ? find_held_lock+0x94/0xa0
[15279.182609] mutex_lock_nested+0x1b/0x20
[15279.182614] ? mutex_lock_nested+0x1b/0x20
[15279.182618] kernfs_remove_by_name_ns+0x2a/0x90
[15279.182625] sysfs_remove_file_ns+0x15/0x20
[15279.182629] device_remove_file+0x19/0x20
[15279.182634] stub_disconnect+0x6d/0x180 [usbip_host]
[15279.182643] usb_unbind_device+0x27/0x60
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nathanchance
pushed a commit
that referenced
this issue
Jan 29, 2020
The test_progs send_signal() is amended to test bpf_send_signal_thread() as well. $ ./test_progs -n 40 #40/1 send_signal_tracepoint:OK #40/2 send_signal_perf:OK #40/3 send_signal_nmi:OK #40/4 send_signal_tracepoint_thread:OK #40/5 send_signal_perf_thread:OK #40/6 send_signal_nmi_thread:OK #40 send_signal:OK Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED Also took this opportunity to rewrite the send_signal test using skeleton framework and array mmap to make code simpler and more readable. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115035003.602425-1-yhs@fb.com
nathanchance
pushed a commit
that referenced
this issue
Jun 4, 2020
The mmu mapping logic uses a different logic depending on the RAM size: if it is lower than 2GB, it uses kmem_cache_zalloc(), but if memory is bigger than that, it uses its own way to allocate memory. Yet, when freeing, it uses kmem_cache_free() for any cases. On recent Kernels, slab tracks the memory allocated on it, with causes those warnings: virt_to_cache: Object is not a Slab page! WARNING: CPU: 0 PID: 758 at mm/slab.h:475 cache_from_obj+0xab/0xf0 Modules linked in: snd_soc_sst_cht_bsw_rt5645(E) mei_hdcp(E) gpio_keys(E) intel_rapl_msr(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) ghash_clmulni_intel(E) atomisp_ov2680(CE) intel_cstate(E) asus_nb_wmi(E) wdat_wdt(E) pcspkr(E) ath10k_pci(E) ath10k_core(E) intel_chtdc_ti_pwrbtn(E) ath(E) mac80211(E) btusb(E) joydev(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) libarc4(E) ecdh_generic(E) cfg80211(E) ecc(E) hid_sensor_gyro_3d(E) hid_sensor_accel_3d(E) hid_sensor_trigger(E) hid_sensor_iio_common(E) industrialio_triggered_buffer(E) kfifo_buf(E) industrialio(E) atomisp(CE) videobuf_vmalloc(E) videobuf_core(E) videodev(E) mc(E) snd_soc_rt5645(E) snd_soc_rl6231(E) snd_intel_sst_acpi(E) snd_intel_sst_core(E) snd_soc_sst_atom_hifi2_platform(E) snd_soc_acpi_intel_match(E) intel_hid(E) spi_pxa2xx_platform(E) snd_soc_acpi(E) snd_soc_core(E) snd_compress(E) dw_dmac(E) intel_xhci_usb_role_switch(E) int3406_thermal(E) snd_hdmi_lpe_audio(E) int3403_thermal(E) int3400_thermal(E) acpi_thermal_rel(E) snd_seq(E) intel_int0002_vgpio(E) soc_button_array(E) snd_seq_device(E) acpi_pad(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) lpc_ich(E) mei_txe(E) mei(E) processor_thermal_device(E) intel_soc_dts_iosf(E) intel_rapl_common(E) int340x_thermal_zone(E) ip_tables(E) hid_sensor_hub(E) intel_ishtp_loader(E) intel_ishtp_hid(E) mmc_block(E) hid_multitouch(E) crc32c_intel(E) i915(E) i2c_algo_bit(E) drm_kms_helper(E) hid_asus(E) asus_wmi(E) sparse_keymap(E) rfkill(E) drm(E) intel_ish_ipc(E) intel_ishtp(E) wmi(E) video(E) i2c_hid(E) sdhci_acpi(E) sdhci(E) mmc_core(E) pwm_lpss_platform(E) pwm_lpss(E) fuse(E) CPU: 0 PID: 758 Comm: v4l_id Tainted: G C E 5.7.0-rc2+ #40 Hardware name: ASUSTeK COMPUTER INC. T101HA/T101HA, BIOS T101HA.306 04/23/2019 RIP: 0010:cache_from_obj+0xab/0xf0 Code: c3 31 c0 80 3d 1c 38 72 01 00 75 f0 48 c7 c6 20 12 06 b5 48 c7 c7 10 f3 37 b5 48 89 04 24 c6 05 01 38 72 01 01 e8 2c 99 e0 ff <0f> 0b 48 8b 04 24 eb ca 48 8b 57 58 48 8b 48 58 48 c7 c6 30 12 06 RSP: 0018:ffffb0a4c07cfb10 EFLAGS: 00010282 RAX: 0000000000000029 RBX: 0000000000000048 RCX: 0000000000000000 RDX: ffffa004fbca5b80 RSI: ffffa004fbc19cc8 RDI: ffffa004fbc19cc8 RBP: 0000000000c49000 R08: 00000000000004f7 R09: 0000000000000001 R10: 0000000000aaaaaa R11: ffffffffb50e0600 R12: ffffffffc0be0a00 R13: ffffa003f2448000 R14: 0000000000c49000 R15: ffffa003f2448000 FS: 00007f9060c9cb80(0000) GS:ffffa004fbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559fc55b8000 CR3: 0000000165b02000 CR4: 00000000001006f0 Call Trace: kmem_cache_free+0x19/0x180 mmu_l2_unmap+0xd1/0x100 [atomisp] mmu_unmap+0xd0/0xf0 [atomisp] hmm_bo_unbind+0x62/0xb0 [atomisp] hmm_free+0x44/0x60 [atomisp] ia_css_spctrl_unload_fw+0x30/0x50 [atomisp] ia_css_uninit+0x3a/0x90 [atomisp] atomisp_open+0x50b/0x5c0 [atomisp] v4l2_open+0x85/0xf0 [videodev] chrdev_open+0xdd/0x210 ? cdev_device_add+0xc0/0xc0 do_dentry_open+0x13a/0x380 path_openat+0xa9a/0xfe0 do_filp_open+0x75/0x100 ? __check_object_size+0x12e/0x13c ? __alloc_fd+0x44/0x150 do_sys_openat2+0x8a/0x130 __x64_sys_openat+0x46/0x70 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Solve it by calling free_page() directly Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
nathanchance
pushed a commit
that referenced
this issue
Aug 16, 2020
…card() If create a loop device with a backing NVMe SSD, current loop device driver doesn't correctly set its queue's limits.discard_granularity and leaves it as 0. If a discard request at LBA 0 on this loop device, in __blkdev_issue_discard() the calculated req_sects will be 0, and a zero length discard request will trigger a BUG() panic in generic block layer code at block/blk-mq.c:563. [ 955.565006][ C39] ------------[ cut here ]------------ [ 955.559660][ C39] invalid opcode: 0000 [#1] SMP NOPTI [ 955.622171][ C39] CPU: 39 PID: 248 Comm: ksoftirqd/39 Tainted: G E 5.8.0-default+ #40 [ 955.622171][ C39] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE160M-2.70]- 07/17/2020 [ 955.622175][ C39] RIP: 0010:blk_mq_end_request+0x107/0x110 [ 955.622177][ C39] Code: 48 8b 03 e9 59 ff ff ff 48 89 df 5b 5d 41 5c e9 9f ed ff ff 48 8b 35 98 3c f4 00 48 83 c7 10 48 83 c6 19 e8 cb 56 c9 ff eb cb <0f> 0b 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 56 41 54 [ 955.622179][ C39] RSP: 0018:ffffb1288701fe28 EFLAGS: 00010202 [ 955.749277][ C39] RAX: 0000000000000001 RBX: ffff956fffba5080 RCX: 0000000000004003 [ 955.749278][ C39] RDX: 0000000000000003 RSI: 0000000000000000 RDI: 0000000000000000 [ 955.749279][ C39] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 955.749279][ C39] R10: ffffb1288701fd28 R11: 0000000000000001 R12: ffffffffa8e05160 [ 955.749280][ C39] R13: 0000000000000004 R14: 0000000000000004 R15: ffffffffa7ad3a1e [ 955.749281][ C39] FS: 0000000000000000(0000) GS:ffff95bfbda00000(0000) knlGS:0000000000000000 [ 955.749282][ C39] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 955.749282][ C39] CR2: 00007f6f0ef766a8 CR3: 0000005a37012002 CR4: 00000000007606e0 [ 955.749283][ C39] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 955.749284][ C39] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 955.749284][ C39] PKRU: 55555554 [ 955.749285][ C39] Call Trace: [ 955.749290][ C39] blk_done_softirq+0x99/0xc0 [ 957.550669][ C39] __do_softirq+0xd3/0x45f [ 957.550677][ C39] ? smpboot_thread_fn+0x2f/0x1e0 [ 957.550679][ C39] ? smpboot_thread_fn+0x74/0x1e0 [ 957.550680][ C39] ? smpboot_thread_fn+0x14e/0x1e0 [ 957.550684][ C39] run_ksoftirqd+0x30/0x60 [ 957.550687][ C39] smpboot_thread_fn+0x149/0x1e0 [ 957.886225][ C39] ? sort_range+0x20/0x20 [ 957.886226][ C39] kthread+0x137/0x160 [ 957.886228][ C39] ? kthread_park+0x90/0x90 [ 957.886231][ C39] ret_from_fork+0x22/0x30 [ 959.117120][ C39] ---[ end trace 3dacdac97e2ed164 ]--- This is the procedure to reproduce the panic, # modprobe scsi_debug delay=0 dev_size_mb=2048 max_queue=1 # losetup -f /dev/nvme0n1 --direct-io=on # blkdiscard /dev/loop0 -o 0 -l 0x200 This patch fixes the issue by checking q->limits.discard_granularity in __blkdev_issue_discard() before composing the discard bio. If the value is 0, then prints a warning oops information and returns -EOPNOTSUPP to the caller to indicate that this buggy device driver doesn't support discard request. Fixes: 9b15d10 ("block: improve discard bio alignment in __blkdev_issue_discard()") Fixes: c52abf5 ("loop: Better discard support for block devices") Reported-and-suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Enzo Matsumiya <ematsumiya@suse.com> Cc: Evan Green <evgreen@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Xiao Ni <xni@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
CC fs/ocfs2/dlm/dlmthread.o fs/ocfs2/dlm/dlmthread.c:534:18: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((res->owner == dlm->node_num)) { ~~~~~~~~~~~^~~~~~~~~~~~~~~~ fs/ocfs2/dlm/dlmthread.c:534:18: note: remove extraneous parentheses around the comparison to silence this warning if ((res->owner == dlm->node_num)) { ~ ^ ~ fs/ocfs2/dlm/dlmthread.c:534:18: note: use '=' to turn this equality comparison into an assignment if ((res->owner == dlm->node_num)) { ^~ =Probably requires
CONFIG_OCFS2_FS=y(there's like 6 OCFS2 configs).The text was updated successfully, but these errors were encountered: