dmaengine: tegra-adma: Add support for Tegra210 ADMA

Add support for the Tegra210 Audio DMA controller that is used for
transferring data between system memory and the Audio sub-system.
The driver only supports cyclic transfers because this is being solely
used for audio.

This driver is based upon the work by Dara Ramesh <dramesh@nvidia.com>.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/Kconfig

@@ -467,6 +467,20 @@ config TEGRA20_APB_DMA
 	  This DMA controller transfers data from memory to peripheral fifo
 	  or vice versa. It does not support memory to memory data transfer.
 
+config TEGRA210_ADMA
+	bool "NVIDIA Tegra210 ADMA support"
+	depends on ARCH_TEGRA_210_SOC
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	select PM_CLK
+	help
+	  Support for the NVIDIA Tegra210 ADMA controller driver. The
+	  DMA controller has multiple DMA channels and is used to service
+	  various audio clients in the Tegra210 audio processing engine
+	  (APE). This DMA controller transfers data from memory to
+	  peripheral and vice versa. It does not support memory to
+	  memory data transfer.
+
 config TIMB_DMA
 	tristate "Timberdale FPGA DMA support"
 	depends on MFD_TIMBERDALE

drivers/dma/Makefile

@@ -59,6 +59,7 @@ obj-$(CONFIG_STM32_DMA) += stm32-dma.o
 obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
+obj-$(CONFIG_TEGRA210_ADMA) += tegra210-adma.o
 obj-$(CONFIG_TIMB_DMA) += timb_dma.o
 obj-$(CONFIG_TI_CPPI41) += cppi41.o
 obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o