scalastyle-config.xml

<!--
  Copied from Spark
  https://github.com/apache/spark/blob/master/scalastyle-config.xml
  -->
<!--
If you wish to turn off checking for a section of code, you can put a comment in the source
before and after the section, with the following syntax:
  // scalastyle:off
  ...  // stuff that breaks the styles
  // scalastyle:on
You can also disable only one rule, by specifying its rule id, as specified in:
  http://www.scalastyle.org/rules-0.7.0.html
  // scalastyle:off no.finalize
  override def finalize(): Unit = ...
  // scalastyle:on no.finalize
This file is divided into 3 sections:
 (1) rules that we enforce.
 (2) rules that we would like to enforce, but haven't cleaned up the codebase to turn on yet
     (or we need to make the scalastyle rule more configurable).
 (3) rules that we don't want to enforce.
-->

<scalastyle>
 <name>Scalastyle standard configuration</name>

 <!-- ================================================================================ -->
 <!--                               rules we enforce                                   -->
 <!-- ================================================================================ -->

 <check level="error" class="org.scalastyle.file.FileTabChecker" enabled="true"></check>

 <!-- Don't need this yet -->
 <check level="error" class="org.scalastyle.file.HeaderMatchesChecker" enabled="false">
  <parameters>
   <parameter name="header"><![CDATA[/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */]]></parameter>
  </parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.SpacesAfterPlusChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.SpacesBeforePlusChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.file.WhitespaceEndOfLineChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.file.FileLineLengthChecker" enabled="true">
  <parameters>
   <parameter name="maxLineLength"><![CDATA[100]]></parameter>
   <parameter name="tabSize"><![CDATA[2]]></parameter>
   <parameter name="ignoreImports">true</parameter>
  </parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.ClassNamesChecker" enabled="true">
  <parameters><parameter name="regex"><![CDATA[[A-Z][A-Za-z]*]]></parameter></parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.ObjectNamesChecker" enabled="true">
  <parameters><parameter name="regex"><![CDATA[[A-Z][A-Za-z]*]]></parameter></parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.PackageObjectNamesChecker" enabled="true">
  <parameters><parameter name="regex"><![CDATA[^[a-z][A-Za-z]*$]]></parameter></parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.ParameterNumberChecker" enabled="true">
  <parameters><parameter name="maxParameters"><![CDATA[10]]></parameter></parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.NoFinalizeChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.CovariantEqualsChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.StructuralTypeChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.UppercaseLChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.IfBraceChecker" enabled="true">
  <parameters>
   <parameter name="singleLineAllowed"><![CDATA[true]]></parameter>
   <parameter name="doubleLineAllowed"><![CDATA[true]]></parameter>
  </parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.PublicMethodsHaveTypeChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.file.NewLineAtEofChecker" enabled="true"></check>

 <check customId="nonascii" level="error" class="org.scalastyle.scalariform.NonASCIICharacterChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.SpaceAfterCommentStartChecker" enabled="true"></check>

 <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceBeforeTokenChecker" enabled="true">
  <parameters>
   <parameter name="tokens">ARROW, EQUALS, ELSE, TRY, CATCH, FINALLY, LARROW, RARROW</parameter>
  </parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceAfterTokenChecker" enabled="true">
  <parameters>
   <parameter name="tokens">ARROW, EQUALS, COMMA, COLON, IF, ELSE, DO, WHILE, FOR, MATCH, TRY, CATCH, FINALLY, LARROW, RARROW</parameter>
  </parameters>
 </check>

 <!-- ??? usually shouldn't be checked into the code base. -->
 <check level="error" class="org.scalastyle.scalariform.NotImplementedErrorUsage" enabled="true"></check>

 <!-- As of SPARK-7558, all tests in Spark should extend o.a.s.SparkFunSuite instead of FunSuite directly -->
 <!-- Turn this off, apparently -->
 <check customId="funsuite" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="false">
  <parameters><parameter name="regex">^FunSuite[A-Za-z]*$</parameter></parameters>
  <customMessage>Tests must extend org.apache.spark.SparkFunSuite instead.</customMessage>
 </check>

 <!-- As of SPARK-7977 all printlns need to be wrapped in '// scalastyle:off/on println' -->
 <check customId="println" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
  <parameters><parameter name="regex">^println$</parameter></parameters>
  <customMessage><![CDATA[Are you sure you want to println? If yes, wrap the code block with
      // scalastyle:off println
      println(...)
      // scalastyle:on println]]></customMessage>
 </check>

 <check customId="visiblefortesting" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">@VisibleForTesting</parameter></parameters>
  <customMessage><![CDATA[
      @VisibleForTesting causes classpath issues. Please note this in the java doc instead (SPARK-11615).
    ]]></customMessage>
 </check>

 <check customId="runtimeaddshutdownhook" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">Runtime\.getRuntime\.addShutdownHook</parameter></parameters>
  <customMessage><![CDATA[
      Are you sure that you want to use Runtime.getRuntime.addShutdownHook? In most cases, you should use
      ShutdownHookManager.addShutdownHook instead.
      If you must use Runtime.getRuntime.addShutdownHook, wrap the code block with
      // scalastyle:off runtimeaddshutdownhook
      Runtime.getRuntime.addShutdownHook(...)
      // scalastyle:on runtimeaddshutdownhook
    ]]></customMessage>
 </check>

 <check customId="mutablesynchronizedbuffer" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">mutable\.SynchronizedBuffer</parameter></parameters>
  <customMessage><![CDATA[
      Are you sure that you want to use mutable.SynchronizedBuffer? In most cases, you should use
      java.util.concurrent.ConcurrentLinkedQueue instead.
      If you must use mutable.SynchronizedBuffer, wrap the code block with
      // scalastyle:off mutablesynchronizedbuffer
      mutable.SynchronizedBuffer[...]
      // scalastyle:on mutablesynchronizedbuffer
    ]]></customMessage>
 </check>

 <!-- Doesn't look like a concern for now -->
 <check customId="classforname" level="error" class="org.scalastyle.file.RegexChecker" enabled="false">
  <parameters><parameter name="regex">Class\.forName</parameter></parameters>
  <customMessage><![CDATA[
      Are you sure that you want to use Class.forName? In most cases, you should use Utils.classForName instead.
      If you must use Class.forName, wrap the code block with
      // scalastyle:off classforname
      Class.forName(...)
      // scalastyle:on classforname
    ]]></customMessage>
 </check>

 <check customId="awaitresult" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">Await\.result</parameter></parameters>
  <customMessage><![CDATA[
      Are you sure that you want to use Await.result? In most cases, you should use ThreadUtils.awaitResult instead.
      If you must use Await.result, wrap the code block with
      // scalastyle:off awaitresult
      Await.result(...)
      // scalastyle:on awaitresult
    ]]></customMessage>
 </check>

 <!-- As of SPARK-9613 JavaConversions should be replaced with JavaConverters -->
 <check customId="javaconversions" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
  <parameters><parameter name="regex">JavaConversions</parameter></parameters>
  <customMessage>Instead of importing implicits in scala.collection.JavaConversions._, import
   scala.collection.JavaConverters._ and use .asScala / .asJava methods</customMessage>
 </check>

 <check customId="commonslang2" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
  <parameters><parameter name="regex">org\.apache\.commons\.lang\.</parameter></parameters>
  <customMessage>Use Commons Lang 3 classes (package org.apache.commons.lang3.*) instead
   of Commons Lang 2 (package org.apache.commons.lang.*)</customMessage>
 </check>

 <check customId="extractopt" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
  <parameters><parameter name="regex">extractOpt</parameter></parameters>
  <customMessage>Use Utils.jsonOption(x).map(.extract[T]) instead of .extractOpt[T], as the latter
   is slower.  </customMessage>
 </check>

 <!-- change spark to ck -->
 <check level="error" class="org.scalastyle.scalariform.ImportOrderChecker" enabled="true">
  <parameters>
   <parameter name="groups">java,scala,3rdParty,ck</parameter>
   <parameter name="group.java">javax?\..*</parameter>
   <parameter name="group.scala">scala\..*</parameter>
   <parameter name="group.3rdParty">(?!org\.datacrafts\.).*</parameter>
   <parameter name="group.datacrafts">org\.datacrafts\..*</parameter>
  </parameters>
 </check>

 <check level="error" class="org.scalastyle.scalariform.DisallowSpaceBeforeTokenChecker" enabled="true">
  <parameters>
   <parameter name="tokens">COMMA</parameter>
  </parameters>
 </check>

 <!-- SPARK-3854: Single Space between ')' and '{' -->
 <check customId="SingleSpaceBetweenRParenAndLCurlyBrace" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">\)\{</parameter></parameters>
  <customMessage><![CDATA[
      Single Space between ')' and `{`.
    ]]></customMessage>
 </check>

 <!-- Don't know why Spark doesn't want ScalaDoc, turn it off -->
 <check customId="NoScalaDoc" level="error" class="org.scalastyle.file.RegexChecker" enabled="false">
  <parameters><parameter name="regex">(?m)^(\s*)/[*][*].*$(\r|)\n^\1  [*]</parameter></parameters>
  <customMessage>Use Javadoc style indentation for multiline comments</customMessage>
 </check>

 <check customId="OmitBracesInCase" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters><parameter name="regex">case[^\n>]*=>\s*\{</parameter></parameters>
  <customMessage>Omit braces in case clauses.</customMessage>
 </check>

 <!-- SPARK-16877: Avoid Java annotations -->
 <check customId="OverrideJavaCase" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
  <parameters><parameter name="regex">^Override$</parameter></parameters>
  <customMessage>override modifier should be used instead of @java.lang.Override.</customMessage>
 </check>

 <check level="error" class="org.scalastyle.scalariform.DeprecatedJavaChecker" enabled="true"></check>

 <!-- ================================================================================ -->
 <!--       rules we'd like to enforce, but haven't cleaned up the codebase yet        -->
 <!-- ================================================================================ -->

 <!-- We cannot turn the following two on, because it'd fail a lot of string interpolation use cases. -->
 <!-- Ideally the following two rules should be configurable to rule out string interpolation. -->
 <check level="error" class="org.scalastyle.scalariform.NoWhitespaceBeforeLeftBracketChecker" enabled="false"></check>
 <check level="error" class="org.scalastyle.scalariform.NoWhitespaceAfterLeftBracketChecker" enabled="false"></check>

 <!-- This breaks symbolic method names so we don't turn it on. -->
 <!-- Maybe we should update it to allow basic symbolic names, and then we are good to go. -->
 <check level="error" class="org.scalastyle.scalariform.MethodNamesChecker" enabled="false">
  <parameters>
   <parameter name="regex"><![CDATA[^[a-z][A-Za-z0-9]*$]]></parameter>
  </parameters>
 </check>

 <!-- Should turn this on, but we have a few places that need to be fixed first -->
 <check level="error" class="org.scalastyle.scalariform.EqualsHashCodeChecker" enabled="true"></check>

 <!-- ================================================================================ -->
 <!--                               rules we don't want                                -->
 <!-- ================================================================================ -->

 <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="false">
  <parameters><parameter name="illegalImports"><![CDATA[sun._,java.awt._]]></parameter></parameters>
 </check>

 <!-- We want the opposite of this: NewLineAtEofChecker -->
 <check level="error" class="org.scalastyle.file.NoNewLineAtEofChecker" enabled="false"></check>

 <!-- This one complains about all kinds of random things. Disable. -->
 <check level="error" class="org.scalastyle.scalariform.SimplifyBooleanExpressionChecker" enabled="false"></check>

 <!-- We use return quite a bit for control flows and guards -->
 <!-- Good to force functional style, turn on -->
 <check level="error" class="org.scalastyle.scalariform.ReturnChecker" enabled="true"></check>

 <!-- We use null a lot in low level code and to interface with 3rd party code -->
 <!-- Discourage using null, if must use can turn off by scalastyle:off or scalastyle:ignore -->
 <check level="error" class="org.scalastyle.scalariform.NullChecker" enabled="true"></check>

 <!-- Doesn't seem super big deal here ... -->
 <check level="error" class="org.scalastyle.scalariform.NoCloneChecker" enabled="false"></check>

 <!-- Doesn't seem super big deal here ... -->
 <check level="error" class="org.scalastyle.file.FileLengthChecker" enabled="false">
  <parameters><parameter name="maxFileLength">800></parameter></parameters>
 </check>

 <!-- Doesn't seem super big deal here ... -->
 <check level="error" class="org.scalastyle.scalariform.NumberOfTypesChecker" enabled="false">
  <parameters><parameter name="maxTypes">30</parameter></parameters>
 </check>

 <!-- Doesn't seem super big deal here ... -->
 <check level="error" class="org.scalastyle.scalariform.CyclomaticComplexityChecker" enabled="false">
  <parameters><parameter name="maximum">10</parameter></parameters>
 </check>

 <!-- Doesn't seem super big deal here ... -->
 <check level="error" class="org.scalastyle.scalariform.MethodLengthChecker" enabled="false">
  <parameters><parameter name="maxLength">50</parameter></parameters>
 </check>

 <!-- Not exactly feasible to enforce this right now. -->
 <!-- It is also infrequent that somebody introduces a new class with a lot of methods. -->
 <check level="error" class="org.scalastyle.scalariform.NumberOfMethodsInTypeChecker" enabled="false">
  <parameters><parameter name="maxMethods"><![CDATA[30]]></parameter></parameters>
 </check>

 <!-- Doesn't seem super big deal here, and we have a lot of magic numbers ... -->
 <check level="error" class="org.scalastyle.scalariform.MagicNumberChecker" enabled="false">
  <parameters><parameter name="ignore">-1,0,1,2,3</parameter></parameters>
 </check>

 <!-- ================================================================================ -->
 <!--                                     new rules                                    -->
 <!-- ================================================================================ -->

 <check customId="NoDoubleBlankLine" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
  <parameters>
   <parameter name="regex">(?m)^\s*$(\r|)\n^\s*$(\r|)\n</parameter>
   <parameter name="line">false</parameter>
  </parameters>
  <customMessage>No double blank lines</customMessage>
 </check>

 <!-- With this check, we don't need -Ywarn-value-discard compile check, since value discard must be intentional -->
 <check level="error" class="org.scalastyle.scalariform.ProcedureDeclarationChecker" enabled="true"></check>

</scalastyle>