git
make- 私が使っている設定
- rpcuser/rpcpasswordはこの値でなくてもよいが、設定は必要
txindexは不要- ZeroMQは使用しない
testnet=1
server=1
rpcuser=bitcoinuser
rpcpassword=bitcoinpassword
- 設定ファイル名は
configで以下の順に参照される。~/.lightningd/config~/.lightningd/<NETWORK_NAME>/configNETWORK_NAME:bitcoin,testnet,signet,regtest- この直下に置く場合は
configにnetworkの設定を書かない。
- 実行後にデータは
~/.lightningd/<NETWORK_NAME>に保存される- やり直したいときは
~/./lightningd自体を削除すればよい- node_idを維持したい場合は、
~/lightningd.sqlite3ファイルだけ削除する
- node_idを維持したい場合は、
- やり直したいときは
network=testnet
bitcoin-rpcuser=bitcoinuser
bitcoin-rpcpassword=bitcoinpassword
bitcoin-rpcconnect=127.0.0.1
bitcoin-rpcport=18332
- 普通に起動すればよい
lightningd --network=testnetgetinfo
lightning-cli getinfolistpeers
lightning-cli listpeerslistchannels
lightning-cli listchannelslistnodes
lightning-cli listnodes- walletにbalanceがない場合は、
lightning-cliでアドレスを取得し、どこかから入金してもらうbitcoin-cli sendtoaddress <address> <amount BTC>かfaucetになるだろう- 状態がおかしくなったらDBを削除することもあるので、
bitcoin-cli getnewaddressで作ったアドレスにfaucetで入金して、bitcoin-cli sendtoaddressするのがおすすめ - 私はこのfaucetをよく使っている
- 状態がおかしくなったらDBを削除することもあるので、
lightning-cli newaddr- 送金したら、
listfundsのoutputsに現れるまでしばらく待つ- コマンドを何度も実行するのが面倒だったら、
watch -n 30 lightning-cli listfundsなどとしておくとよいだろう
- コマンドを何度も実行するのが面倒だったら、
lightning-cli listfunds
lightning-cli connect <node_id>@<ip>:<port>
- connect要求したら、相手がpeerリストに現れるのを待つ
- 表示されるまでに時間がかかることがある(announcementが多いため？)
lightning-cli listpeers
- connectが成功したら、
fundchannelでチャネル開設開始amountの単位はsatoshi
lightning-cli fundchannel <node_id> <amount>
- fundchannel要求したら、stateが
CHANNELD_AWAITING_LOCKINからCHANNELD_NORMALに変化するまで待つ
lightning-cli listpeers
- amount_msatの単位はmsatoshi
- labelとdescriptionは目印程度なので、あまり考えなくて良い
- descriptionは、BOLT11形式のinvoiceに文字列(purpose of payment(ASCII))として載る
lightning-cli invoice <amount_msat> <label> <description>
lightning-cli pay <BOLT11 invoice>
## mutual close
lightning-cli close <peer node_id>
## unilateral close
lightning-cli close <peer node_id> true
v23.08.1
Usage: lightningd
A bitcoin lightning daemon (default values shown for network: regtest).
--list-features-only List the features configured, and exit immediately
--conf=<file> Specify configuration file
--lightning-dir=<dir> Set base directory: network-specific subdirectory is under here (default: "/home/ueno/.lightning")
--network <arg> Select the network parameters (bitcoin, testnet, signet, regtest, litecoin or litecoin-testnet) (default: regtest)
--testnet Alias for --network=testnet
--signet Alias for --network=signet
--mainnet Alias for --network=bitcoin
--regtest Alias for --network=regtest
--version|-V Print version and exit
--rpc-file <arg> Set JSON-RPC socket (or /dev/tty) (default: "lightning-rpc")
--test-daemons-only Test that subdaemons can be run, then exit immediately
--allow-deprecated-apis <arg> Enable deprecated options, JSONRPC commands, fields, etc. (default: true)
--plugin <arg> Add a plugin to be run (can be used multiple times)
--plugin-dir <arg> Add a directory to load plugins from (can be used multiple times)
--clear-plugins Remove all plugins added before this option
--disable-plugin <arg> Disable a particular plugin by filename/name
--important-plugin <arg> Add an important plugin to be run (can be used multiple times). Die if the plugin dies.
--always-use-proxy <arg> Use the proxy always (default: false)
--daemon Run in the background, suppress stdout/stderr
--wallet <arg> Location of the wallet database.
--recover <arg> Populate hsm_secret with the given codex32 secret and starts the node in `offline` mode.
--large-channels|--wumbo Allow channels larger than 0.16777215 BTC
--experimental-dual-fund experimental: Advertise dual-funding and allow peers to establish channels via v2 channel open protocol.
--experimental-splicing experimental: Enables the ability to resize channels using splicing
--experimental-onion-messages EXPERIMENTAL: enable send, receive and relay of onion messages and blinded payments
--experimental-offers EXPERIMENTAL: enable send and receive of offers (also sets experimental-onion-messages)
--experimental-shutdown-wrong-funding EXPERIMENTAL: allow shutdown with alternate txids
--experimental-peer-storage EXPERIMENTAL: enable peer backup storage and restore
--experimental-quiesce experimental: Advertise ability to quiesce channels.
--experimental-anchors EXPERIMENTAL: enable option_anchors_zero_fee_htlc_tx to open zero-fee-anchor channels
--help|-h Print this message.
--rgb <arg> RRGGBB hex color for node
--alias <arg> Up to 32-byte alias for node
--pid-file=<file> Specify pid file (default: "/home/ueno/.lightning/lightningd-regtest.pid")
--ignore-fee-limits <arg> (DANGEROUS) allow peer to set any feerate (default: true)
--watchtime-blocks <arg> Blocks before peer can unilaterally spend funds (default: 6)
--max-locktime-blocks <arg> Maximum blocks funds may be locked for (default: 2016)
--funding-confirms <arg> Confirmations required for funding transaction (default: 1)
--require-confirmed-inputs <arg> Confirmations required for inputs to funding transaction (v2 opens only) (default: false)
--cltv-delta <arg> Number of blocks for cltv_expiry_delta (default: 6)
--cltv-final <arg> Number of blocks for final cltv_expiry (default: 10)
--commit-time=<millseconds> Time after changes before sending out COMMIT (default: 10)
--fee-base <arg> Millisatoshi minimum to charge for HTLC (default: 1)
--rescan <arg> Number of blocks to rescan from the current head, or absolute blockheight if negative (default: 30)
--fee-per-satoshi <arg> Microsatoshi fee for every satoshi in HTLC (default: 10)
--htlc-minimum-msat <arg> The default minimal value an HTLC must carry in order to be forwardable for new channels (default: 0)
--htlc-maximum-msat <arg> The default maximal value an HTLC must carry in order to be forwardable for new channel (default: 18446744073709551615)
--max-concurrent-htlcs <arg> Number of HTLCs one channel can handle concurrently. Should be between 1 and 483 (default: 483)
--max-dust-htlc-exposure-msat <arg> Max HTLC amount that can be trimmed (default: 50000000)
--min-capacity-sat <arg> Minimum capacity in satoshis for accepting channels (default: 10000)
--addr <arg> Set an IP address (v4 or v6) to listen on and announce to the network for incoming connections
--bind-addr <arg> Set an IP address (v4 or v6) to listen on, but not announce
--announce-addr <arg> Set an IP address (v4 or v6) or .onion v3 to announce, but not listen on
--announce-addr-discovered <arg> Explicitly turns IP discovery 'on' or 'off'. (default: auto)
--announce-addr-discovered-port <arg> Sets the public TCP port to use for announcing discovered IPs. (default: 19846)
--offline Start in offline-mode (do not automatically reconnect and do not accept incoming connections)
--autolisten <arg> If true, listen on default port and announce if it seems to be a public interface (default: true)
--proxy <arg> Set a socks v5 proxy IP address and port
--tor-service-password <arg> Set a Tor hidden service password
--accept-htlc-tlv-type <arg> HTLC TLV type to accept (can be used multiple times)
--disable-dns Disable DNS lookups of peers
--encrypted-hsm Set the password to encrypt hsm_secret with. If no password is passed through command line, you will be prompted to enter it.
--rpc-file-mode <arg> Set the file mode (permissions) for the JSON-RPC socket (default: 0600)
--force-feerates <arg> Set testnet/regtest feerates in sats perkw, opening/mutual_close/unlateral_close/delayed_to_us/htlc_resolution/penalty: if fewer specified, last
number applies to remainder
--commit-fee <arg> Percentage of fee to request for their commitment (default: 100)
--min-emergency-msat <arg> Amount to leave in wallet for spending anchor closes (default: 25000000)
--subdaemon <arg> Arg specified as SUBDAEMON:PATH. Specifies an alternate subdaemon binary. If the supplied path is relative the subdaemon binary is found in the
working directory. This option may be specified multiple times. For example, --subdaemon=hsmd:remote_signer would use a hypothetical remote
signing subdaemon.
--experimental-upgrade-protocol experimental: allow channel types to be upgraded on reconnect
--database-upgrade <arg> Set to true to allow database upgrades even on non-final releases (WARNING: you won't be able to downgrade!)
--log-level <arg> log level (io, debug, info, unusual, broken) [:prefix] (default: debug)
--log-timestamps <arg> prefix log messages with timestamp (default: true)
--log-prefix <arg> log prefix
--log-file=<file> Also log to file (- for stdout)
--renepay-debug-mcf Enable renepay MCF debug info.
--renepay-debug-payflow Enable renepay payment flows debug info.
--bitcoin-datadir <arg> -datadir arg for bitcoin-cli
--bitcoin-cli <arg> bitcoin-cli pathname
--bitcoin-rpcuser <arg> bitcoind RPC username
--bitcoin-rpcpassword <arg> bitcoind RPC password
--bitcoin-rpcconnect <arg> bitcoind RPC host to connect to
--bitcoin-rpcport <arg> bitcoind RPC host's port
--bitcoin-retry-timeout <arg> how long to keep retrying to contact bitcoind before fatally exiting
--funder-policy <arg> Policy to use for dual-funding requests. [match, available, fixed]
--funder-policy-mod <arg> Percent to apply policy at (match/available); or amount to fund (fixed)
--funder-min-their-funding <arg> Minimum funding peer must open with to activate our policy
--funder-max-their-funding <arg> Maximum funding peer may open with to activate our policy
--funder-per-channel-min <arg> Minimum funding we'll add to a channel. If we can't meet this, we don't fund
--funder-per-channel-max <arg> Maximum funding we'll add to a channel. We cap all contributions to this
--funder-reserve-tank <arg> Amount of funds we'll always leave available.
--funder-fuzz-percent <arg> Percent to fuzz the policy contribution by. Defaults to 0%. Max is 100%
--funder-fund-probability <arg> Percent of requests to consider. Defaults to 100%. Setting to 0% will disable dual-funding
--funder-lease-requests-only <arg> Only fund lease requests. Defaults to true if channel lease rates are being advertised
--lease-fee-base-sat <arg> Channel lease rates, base fee for leased funds, in satoshi.
--lease-fee-basis <arg> Channel lease rates, basis charged for leased funds (per 10,000 satoshi.)
--lease-funding-weight <arg> Channel lease rates, weight we'll ask opening peer to pay for in funding transaction
--channel-fee-max-base-msat <arg> Channel lease rates, maximum channel fee base we'll charge for funds routed through a leased channel.
--channel-fee-max-proportional-thousandths <arg> Channel lease rates, maximum proportional fee (in thousandths, or ppt) we'll charge for funds routed through a leased channel. Note: 1ppt =
1,000ppm
--disable-mpp Disable multi-part payments.
--dev-sqlfilename <arg> Use on-disk sqlite3 file instead of in memory (e.g. debugging)
--fetchinvoice-noconnect Don't try to connect directly to fetch an invoice.
--grpc-port <arg> Which port should the grpc plugin listen for incoming connections? (default: -1)
--autoclean-cycle <arg> Perform cleanup every given seconds
--autoclean-succeededforwards-age <arg> How old do successful forwards have to be before deletion (0 = never)
--autoclean-failedforwards-age <arg> How old do failed forwards have to be before deletion (0 = never)
--autoclean-succeededpays-age <arg> How old do successful pays have to be before deletion (0 = never)
--autoclean-failedpays-age <arg> How old do failed pays have to be before deletion (0 = never)
--autoclean-paidinvoices-age <arg> How old do paid invoices have to be before deletion (0 = never)
--autoclean-expiredinvoices-age <arg> How old do expired invoices have to be before deletion (0 = never)
--bookkeeper-dir <arg> Location for bookkeeper records.
--bookkeeper-db <arg> Location of the bookkeeper database
configure --enable-developerを付けると開発者モードでビルドされる。
$ ./lightningd --help | grep -e "--dev"
--dev-debugger=<subprocess> Invoke gdb at start of <subprocess>
--dev-no-plugin-checksum Don't checksum plugins to detect changes
--dev-builtin-plugins-unimportant Make builtin plugins unimportant so you can plugin stop
--dev-no-reconnect Disable automatic reconnect-attempts by this node, but
--dev-fast-reconnect Make max default reconnect delay 3 (not 300) seconds
--dev-disconnect=<filename> File containing disconnection points
--dev-allow-localhost Announce and allow announcments for localhost address
--dev-bitcoind-poll <arg> Time between polling for new transactions (default: 30)
--dev-fast-gossip Make gossip broadcast 1 second, etc
--dev-fast-gossip-prune Make gossip pruning 30 seconds
--dev-gossip-time <arg> UNIX time to override gossipd to use. (default: 0)
--dev-force-privkey <arg> Force HSM to use this as node private key
--dev-force-bip32-seed <arg> Force HSM to use this as bip32 seed
--dev-force-channel-secrets <arg> Force HSM to use these for all per-channel secrets
--dev-max-funding-unconfirmed-blocks <arg> Maximum number of blocks we wait for a channel funding
--dev-force-tmp-channel-id <arg> Force the temporary channel id, instead of random
--dev-no-htlc-timeout Don't kill channeld if HTLCs not confirmed within 30 seconds
--dev-fail-process-onionpacket Force all processing of onion packets to fail
--dev-no-version-checks Skip calling subdaemons with --version on startup
--dev-force-features <arg> Force the init/globalinit/node_announce/channel/bolt11/
--dev-timeout-secs <arg> Seconds to timeout if we don't receive INIT from peer
--dev-no-modern-onion Ignore modern onion messages
--dev-disable-commit-after <arg> Disable commit timer after this many commits (default: -1)
--dev-no-ping-timer Don't hang up if we don't get a ping response
--dev-onion-reply-length <arg> Send onion errors of custom length (default: 256)
--dev-max-fee-multiplier <arg> Allow the fee proposed by the remote end to be up to
--dev-allowdustreserve <arg> If true, we allow the `fundchannel` RPC command and the
--dev-no-fake-fees <arg> Suppress fee faking for regtest
--dev-sqlfilename <arg> Use on-disk sqlite3 file instead of in memory (e.g.
v23.08.1
=== backup ===
staticbackup
Returns SCB of all the channels currently present in the DB
=== bitcoin ===
feerates style
Return feerate estimates, either satoshi-per-kw ({style} perkw) or satoshi-per-kb ({style} perkb).
fundpsbt satoshi feerate startweight [minconf] [reserve] [locktime] [min_witness_weight] [excess_as_change] [nonwrapped] [opening_anchor_channel]
Create PSBT using enough utxos to allow an output of {satoshi} at {feerate}
newaddr [addresstype]
Get a new {bech32} (or all) address to fund a channel
parsefeerate feerate
Return current feerate in perkw + perkb for given feerate string.
reserveinputs psbt [exclusive] [reserve]
Reserve utxos (or increase their reservation)
sendpsbt psbt [reserve]
Finalize, extract and send a PSBT.
setpsbtversion psbt version
Convert a given PSBT to the {version} requested (v0 or v2)
signpsbt psbt [signonly]
Sign this wallet's inputs on a provided PSBT.
unreserveinputs psbt [reserve]
Unreserve utxos (or at least, reduce their reservation)
utxopsbt satoshi feerate startweight utxos [reserve] [reservedok] [locktime] [min_witness_weight] [excess_as_change] [opening_anchor_channel]
Create PSBT using these utxos
=== channels ===
close id [unilateraltimeout] [destination] [fee_negotiation_step] [wrong_funding] [force_lease_closed] [feerange]
Close the channel with {id} (either peer ID, channel ID, or short channel ID). Force a unilateral close after {unilateraltimeout} seconds (default 48h). If {destination} address is provided, will be used as output address.
delforward in_channel in_htlc_id status
Delete a forwarded payment by [in_channel], [in_htlc_id] and [status]
fundchannel_cancel id
Cancel inflight channel establishment with peer {id}.
fundchannel_complete id psbt
Complete channel establishment with peer {id} for funding transactionwith {psbt}. Returns true on success, false otherwise.
fundchannel_start id amount [feerate] [announce] [close_to] [push_msat] [mindepth] [reserve]
Start fund channel with {id} using {amount} satoshis. Returns a bech32 address to use as an output for a funding transaction.
listforwards [status] [in_channel] [out_channel]
List all forwarded payments and their information optionally filtering by [status], [in_channel] and [out_channel]
listhtlcs [id]
List all known HTLCS (optionally, just for [id] (scid or channel id))
openchannel_abort channel_id
Abort {channel_id}'s open. Usable while `commitment_signed=false`.
openchannel_bump channel_id amount initialpsbt [funding_feerate]
Attempt to bump the fee on {channel_id}'s funding transaction.
openchannel_init id amount initialpsbt [commitment_feerate] [funding_feerate] [announce] [close_to] [request_amt] [compact_lease]
Init an open channel to {id} with {initialpsbt} for {amount} satoshis. Returns updated {psbt} with (partial) contributions from peer
openchannel_signed channel_id signed_psbt
Send our {signed_psbt}'s tx sigs for {channel_id}.
openchannel_update channel_id psbt
Update {channel_id} with {psbt}. Returns updated {psbt} with (partial) contributions from peer. If {commitments_secured} is true, next call should be to openchannel_signed
recoverchannel scb
Populate the DB with a channel and peerUsed for recovering the channel using DLP.This needs param in the form of an array [scb1,scb2,...]
setchannel id [feebase] [feeppm] [htlcmin] [htlcmax] [enforcedelay] [ignorefeelimits]
Sets fees and/or htlc_max for channel with {id} (either peer ID, channel ID, short channel ID or 'all'). If {feebase}, {feeppm} or {htlcmax} is missing, it is unchanged.{base} can also be defined in other units, for example '1sat'. If {id} is 'all', the fees will be applied for all channels.
setleaserates lease_fee_base_msat lease_fee_basis funding_weight channel_fee_max_base_msat channel_fee_max_proportional_thousandths
Called by plugin to set the node's present channel lease rates. Not to be set without having a plugin which can handle `openchannel2` hooks.
splice_init channel_id relative_amount [initialpsbt] [feerate_per_kw] [force_feerate]
Init a channel splice to {channel_id} for {relative_amount} satoshis with {initialpsbt}. Returns updated {psbt} with (partial) contributions from peer
splice_signed channel_id psbt [sign_first]
Send our {signed_psbt}'s tx sigs for {channel_id}.
splice_update channel_id psbt
Update {channel_id} currently active negotiated splice with {psbt}. Returns updated {psbt} with (partial) contributions from peer. If {commitments_secured} is true, next call may be to splicechannel_finalize, otherwise keep calling splice_update passing back in the returned PSBT until {commitments_secured} is true.
=== network ===
connect id [host] [port]
Connect to {id} at {host} (which can end in ':port' if not default). {id} can also be of the form id@host
disconnect id [force]
Disconnect from {id} that has previously been connected to using connect; with {force} set, even if it has a current channel
listclosedchannels [id]
Show historical (dead) channels.
listpeerchannels [id]
Show channels with direct peers.
listpeers [id] [level]
Show current peers, if {level} is set, include logs for {id}
ping id [len] [pongbytes]
Send peer {id} a ping of length {len} (default 128) asking for {pongbytes} (default 128)
=== payment ===
createinvoice invstring label preimage
Lowlevel command to sign and create invoice {invstring}, resolved with {preimage}, using unique {label}.
createinvoicerequest bolt12 savetodb [exposeid] [recurrence_label] [single_use]
Create and sign an invoice_request {bolt12}, with {recurrence_label} if recurring, filling in payer_info and payer_key.
createoffer bolt12 [label] [single_use]
Create and sign an offer {bolt12} with and optional {label}.
createonion hops assocdata [session_key] [onion_size]
Create an onion going through the provided nodes, each with its own payload
decodepay bolt11 [description]
Decode {bolt11}, using {description} if necessary
delexpiredinvoice (DEPRECATED!) [maxexpirytime]
Delete all expired invoices that expired as of given {maxexpirytime} (a UNIX epoch time), or all expired invoices if not specified
delinvoice label status [desconly]
Delete unpaid invoice {label} with {status}
delpay payment_hash status [partid] [groupid]
Delete payment with {payment_hash} and {status}
disableinvoicerequest invreq_id
Disable invoice_request {invreq_id}
disableoffer offer_id
Disable offer {offer_id}
invoice amount_msat label description [expiry] [fallbacks] [preimage] [exposeprivatechannels] [cltv] [deschashonly]
Create an invoice for {msatoshi} with {label} and {description} with optional {expiry} seconds (default 1 week), optional {fallbacks} address list(default empty list) and optional {preimage} (default autogenerated)
listinvoicerequests [invreq_id] [active_only]
If {invreq_id} is set, show that. Otherwise, if {showdisabled} is true, list all, otherwise just non-disabled ones.
listinvoices [label] [invstring] [payment_hash] [offer_id] [index] [start] [limit]
Show invoice matching {label}, {invstring}, {payment_hash} or {offerid} (or all, if no query parameter specified)
listoffers [offer_id] [active_only]
If {offer_id} is set, show that. Otherwise, if {showdisabled} is true, list all, otherwise just non-disabled ones.
listsendpays [bolt11] [payment_hash] [status]
Show sendpay, old and current, optionally limiting to {bolt11} or {payment_hash}.
listtransactions
List transactions that we stored in the wallet
payersign messagename fieldname merkle tweak
Sign {messagename} {fieldname} {merkle} (a 32-byte hex string) using public {tweak}
preapproveinvoice bolt11
Ask the HSM to preapprove an invoice.
preapprovekeysend destination payment_hash amount_msat
Ask the HSM to preapprove a keysend payment.
sendonion onion first_hop payment_hash [label] [shared_secrets] [partid] [bolt11] [amount_msat] [destination] [localinvreqid] [groupid] [description]
Send a payment with a pre-computed onion.
sendpay route payment_hash [label] [amount_msat] [bolt11] [payment_secret] [partid] [localinvreqid] [groupid] [payment_metadata] [description]
Send along {route} in return for preimage of {payment_hash}
signinvoice invstring
Lowlevel command to sign invoice {invstring}.
waitanyinvoice [lastpay_index] [timeout]
Wait for the next invoice to be paid, after {lastpay_index} (if supplied). If {timeout} seconds is reached while waiting, fail with an error.
waitinvoice label
Wait for an incoming payment matching the invoice with {label}, or if the invoice expires
waitsendpay payment_hash [timeout] [partid] [groupid]
Wait for payment attempt on {payment_hash} to succeed or fail, but only up to {timeout} seconds.
=== plugin ===
autoclean-once subsystem age
Perform a single run of autocleaning on one subsystem
autoclean-status [subsystem]
Show status of autocleaning
autocleaninvoice (DEPRECATED!) [cycle_seconds] [expired_by]
Set up autoclean of expired invoices.
bkpr-channelsapy [start_time] [end_time]
Stats on channel fund usage
bkpr-dumpincomecsv csv_format [csv_file] [consolidate_fees] [start_time] [end_time]
Print out all the income events to a csv file in {csv_format
bkpr-inspect account
See the current on-chain graph of an {account}
bkpr-listaccountevents [account]
List all events for an {account}
bkpr-listbalances
List current account balances
bkpr-listincome [consolidate_fees] [start_time] [end_time]
List all income impacting events
commando peer_id method [params] [rune] [filter]
Send a commando message to a direct peer, wait for response
commando-blacklist [start] [end]
Blacklist a rune or range of runes by unique id
commando-listrunes [rune]
List runes we have created earlier
commando-rune [rune] [restrictions]
Create or restrict a rune
decode string
Decode {string} message, returning {type} and information.
emergencyrecover
Populates the DB with stub channels
estimatefees
Get the urgent, normal and slow Bitcoin feerates as sat/kVB.
fundchannel id amount [feerate] [announce] [minconf] [utxos] [push_msat] [close_to] [request_amt] [compact_lease] [mindepth] [reserve]
Fund channel with {id} using {amount} (or 'all'), at optional {feerate}. Only use outputs that have {minconf} confirmations.
funderupdate [policy] [policy_mod] [leases_only] [min_their_funding_msat] [max_their_funding_msat] [per_channel_min_msat] [per_channel_max_msat] [reserve_tank_msat] [fuzz_percent] [fund_probability] [lease_fee_base_msat] [lease_fee_basis] [funding_weight] [channel_fee_max_base_msat] [channel_fee_max_proportional_thousandths]
Configuration for dual-funding settings.
getchaininfo last_height
Get the chain id, the header count, the block count, and whether this is IBD.
getrawblockbyheight height
Get the bitcoin block at a given height
getroute id amount_msat riskfactor [cltv] [fromid] [fuzzpercent] [exclude] [maxhops]
Primitive route command
getutxout txid vout
Get information about an output, identified by a {txid} an a {vout}
invoicerequest amount description [issuer] [label] [absolute_expiry] [single_use]
Create an invoice_request to send money
keysend destination amount_msat [label] [maxfeepercent] [retry_for] [maxdelay] [exemptfee] [extratlvs] [routehints]
Send a payment without an invoice to a node
listchannels [short_channel_id] [source] [destination]
List all known channels in the network
listincoming
List the channels incoming from our direct peers
listnodes [id]
List all known nodes in the network
listpays [bolt11] [payment_hash] [status]
List result of payment {bolt11} or {payment_hash}, or all
listsqlschemas [table]
Display schemas for internal sql tables, or just {table}
multifundchannel destinations [feerate] [minconf] [utxos] [minchannels] [commitment_feerate]
Fund channels to {destinations}, which is an array of objects containing peer {id}, {amount}, and optional {announce} and {push_msat}. A single transaction will be used to fund all the channels. Use {feerate} for the transaction, select outputs that are buried {minconf} blocks deep, or specify a set of {utxos}.
multiwithdraw outputs [feerate] [minconf] [utxos]
Send to multiple {outputs} via a single Bitcoin transaction.
offer amount description [issuer] [label] [quantity_max] [absolute_expiry] [recurrence] [recurrence_base] [recurrence_paywindow] [recurrence_limit] [single_use]
Create an offer to accept money
pay bolt11 [amount_msat] [label] [riskfactor] [maxfeepercent] [retry_for] [maxdelay] [exemptfee] [localinvreqid] [exclude] [maxfee] [description]
Send payment specified by {bolt11}
paystatus [bolt11]
Detail status of attempts to pay {bolt11}, or all
plugin subcommand=start|stop|startdir|rescan|list
Control plugins (start, stop, startdir, rescan, list)
renepay invstring [amount_msat] [maxfee] [maxdelay] [retry_for] [localofferid] [description] [label]
Send payment specified by {invstring}
renepaystatus [invstring]
Detail status of attempts to pay {bolt11}, or all
restorefrompeer
Checks if i have got a backup from a peer, and if so, will stub those channels in the database and if is successful, will return list of channels that have been successfully stubbed
sendrawtransaction tx allowhighfees
Send a raw transaction to the Bitcoin network.
sql query
Run {query} and return result
txdiscard txid
Discard a transaction created by txprepare
txprepare outputs [feerate] [minconf] [utxos]
Create a transaction, with option to spend in future (either txsend and txdiscard)
txsend txid
Send a transaction created by txprepare
upgradewallet [feerate] [reservedok]
Spend p2sh wrapped outputs into a native segwit output
withdraw destination satoshi [feerate] [minconf] [utxos]
Send funds to {destination} address
=== utility ===
addgossip message
Inject gossip {message} into gossipd
batching enable
Database transaction batching {enable}
blacklistrune [start] [end]
Blacklist a rune or range of runes by taking an optional {start} and an optional {end} and returns {blacklist} array containing {start}, {end}
blindedpath ids pathsecret
Create blinded path to us along {ids} (pubkey array ending in our id)
check command_to_check
Don't run {command_to_check}, just verify parameters.
checkmessage message zbase [pubkey]
Verify a digital signature {zbase} of {message} signed with {pubkey}
checkrune rune [nodeid] [method] [params]
Checks rune for validity with required {rune} and optional {nodeid}, {method}, {params} and returns {valid: true} or error message
createrune [rune] [restrictions]
Create or restrict an optional {rune} with optional {restrictions} and returns {rune}
datastore key [string] [hex] [mode] [generation]
Add a {key} and {hex}/{string} data to the data store
deldatastore key [generation]
Remove a {key} from the data store
destroyrune [start] [end]
Destroy a rune or range of runes by taking an optional {start} and an optional {end} and returns {blacklist} array containing {start}, {end}
dev-sendcustommsg node_id msg
Send a custom message to the peer with the given {node_id}
getinfo
Show information about this node
getlog [level]
Show logs, with optional log {level} (info|unusual|debug|io)
help [command]
List available commands, or give verbose help on one {command}.
invokerune [rune] [restrictions]
Invoke or restrict an optional {rune} with optional {restrictions} and returns {rune}
listconfigs [config]
List all configuration options, or with [config], just that one.
listdatastore [key]
List the datastore, optionally only {key}
listfunds [spent]
Show available funds from the internal wallet
makesecret [hex] [string]
Get a pseudorandom secret key, using some {hex} data.
notifications enable
{enable} notifications
sendcustommsg node_id msg
Send a custom message to the peer with the given {node_id}
sendonionmessage first_id blinding hops
Send message to {first_id}, using {blinding}, encoded over {hops} (id, tlv)
setconfig config [val]
Set a dynamically-adjustable config.
showrunes [rune]
Show the list of runes or decode an optional {rune}.
signmessage message
Create a digital signature of {message}
stop
Shut down the lightningd process
wait subsystem indexname nextvalue
Wait for {subsystem} {indexname} to reach or exceed {value})
waitblockheight blockheight [timeout]
Wait for the blockchain to reach {blockheight}, up to {timeout} seconds.
=== developer ===
dev-listaddrs [bip32_max_index]
Show addresses list up to derivation {index} (default is the last bip32 index)
dev-rescan-outputs
Synchronize the state of our funds with bitcoind
---
run `lightning-cli help <command>` for more information on a specific command
update_fulfill_htlcを送信させない