Getting-Started.md

Getting Started

Prerequisites

Before you get started, here are the steps you need to perform for prerequisites:

• Check deployment checklist and install AzureStack HCI OS on your servers to be deployed as AzureStack HCI clusters
• Complete the step 2 (Download the software) & 3 (Install the OS) in this doc.
• Make sure Remote management section is Enabled.

Step 1 (Prepare Active Directory) & 4 (Register with Arc and set up permissions) are covered in the project.

Overview

The QuickStart solution uses remote PowerShell to complete the Active Directory preparation and Arc registration. The following picture shows an overview of a basic hardware setup.

In dev center, there are Windows servers act as AzDO agents and Active Directory Domain Controllers. On edge, servers are installed with HCI OS. All the servers are connected to the Corp net. Servers on edge allows remote management inside the Corp net. No inbound is allowed from the Internet.

With this hardware setup, system admins can provision HCI clusters at scale by AzDO pipelines.

Setup

1. Create a repository based on this template
2. Setup AzDO agents
3. Add Terraform AzDO extension
4. Create IaC resources
5. Create service connection and grant roles
6. Create pipeline

Next Step

Go back to home page

Learn more:

• About adding your first site with static templates
• About your CI/CD pipeline running status
• About troubleshooting
• About enabling arc extensions for all sites